Intel

EPF8820AGC192-2 - FLEX 8000 FPGA, 8K Gates, 192-Pin CPGA | Intel

Артикул: EPF8820AGC192-2 ✗ Снят с производства

В наличии Отправка в течение 1–3 рабочих дней

5 V Vdss 192-pin CPGA (Ceramic Pin Grid Array) Package 125 MHz Speed

От $55 USD / шт.

MOQ: 1 |

Цена обновлена: 2026-09-11

Оптовые цены

Кол-во	Цена за ед.	Итого
1	$95	$95,00
10	$82	$820,00
100	$71	$7.100,00
500	$62.5	$31.250,00
1.000	$55	$55.000,00

ℹ️ Все цены указаны в USD

Открыть datasheet (PDF) Смотреть аналоги

Количество

EPF8820AGC192-2 Обзор

The Intel EPF8820AGC192-2 is a member of the FLEX 8000 programmable logic device family, delivering 8K usable gates, 672 logic cells, and a maximum internal clock frequency of 125 MHz in a 192-pin Ceramic Pin Grid Array (CPGA) package. Fabricated on a 0.42 µm CMOS process and powered from a 5 V supply, the EPF8820AGC192-2 delivers up to 16,000 usable gates and 1,500 registers with in-circuit reconfigurability (ICR) via external configuration devices or intelligent controllers.

An FPGA (Field Programmable Gate Array) is a type of integrated circuit containing an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that can be electrically reconfigured by the designer after manufacture. FPGAs sit within the broader hierarchy: programmable logic device (PLD) -> FPGA -> programmable logic -> digital semiconductor. The FLEX 8000 family, introduced in the mid-1990s, was one of the early register-rich, SRAM-based CMOS PLD families aimed at glue-logic, bus-interface, and state-machine consolidation in 5 V systems.

Key features include a maximum clock frequency of 125 MHz, propagation delay of 5.0 ns (per third-party catalog data), 3.3 V or 5 V tolerant I/O operation, and configurable I/O standards. The device supports multiple I/O voltage references, allowing direct interfacing with 3.3 V and 5 V buses. In-circuit reconfigurability lets the design be updated in-system without removing the part, which was a defining advantage of the FLEX 8000 family over one-time-programmable PLDs.

Architecturally, the EPF8820AGC192-2 uses a SRAM-based lookup-table fabric backed by registers, with FastTrack interconnect providing predictable routing delays. The 192-pin CPGA ceramic package is intended for through-hole industrial and military sockets where mechanical robustness and thermal performance outweigh the board area required by plastic QFP alternatives.

Typical applications include industrial bus controllers, legacy 5 V system glue logic, telecom backplane interface logic, prototyping platforms, and retrocomputing or avionics systems where FLEX 8000 designs are preserved as firmware-equivalent IP. The 5 V tolerant I/O simplifies integration with TTL and CMOS legacy buses.

When designing with this part, ensure the configuration EPROM is correctly selected and that ICR is disabled during reset to prevent spurious configuration loading. The CPGA package requires a through-hole socket; verify socket footprint and pin-1 orientation before layout.

This page synthesizes distributor pricing, parametric compatibility data, and practical design considerations not aggregated on any single manufacturer or distributor page, complementing the original FLEX 8000 datasheet.

Аналоги без доработки для EPF8820AGC192-2 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с EPF8820AGC192-2 (тот же форм-фактор и посадочное место) — отличается по Process Technology, Configuration Method, Package, Operating Temperature, Usable Gates.

EPF81500ARC240-3

Intel

Configuration Method: SRAM, serial or parallel EPROM, JTAG

Package: 240-BFQFP Exposed Pad (240-RQFP)

Usable Gates: 16,000

Сравнить с EPF8820AGC192-2 →

EPF8452AQC160-4

Altera

Process Technology: 0.42 um CMOS SRAM

Configuration Method: SRAM, in-circuit reconfigurable

Package: 160-BQFP / PQFP

Сравнить с EPF8820AGC192-2 →

EPF8636AQC208-3

Intel

Process Technology: CMOS

Package: 208-pin BFQFP (PQFP)

Operating Temperature: 0C to 70C (Commercial)

Сравнить с EPF8820AGC192-2 →

EPF8636AQC208-4

Altera

Process Technology: 0.42 µm CMOS, SRAM-based

Configuration Method: Serial / Passive Parallel Asynchronous with ICR (in-circuit reconfigurability)

Operating Temperature: 0 °C to +70 °C (commercial)

Сравнить с EPF8820AGC192-2 →

EPF8820AQC160-2

Intel

Package: 160-pin PQFP (BQFP)

Operating Temperature: 0 °C to 70 °C (Commercial)

Usable Gates: 8,000

Сравнить с EPF8820AGC192-2 →

EPF8820AQC208-2

Altera

Process Technology: CMOS, SRAM-based configuration

Configuration Method: In-Circuit Reconfigurability (ICR) via external device; SRAM-volatile

Operating Temperature: 0 C to 70 C (Commercial)

Сравнить с EPF8820AGC192-2 →

Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:

EPF8820AGC192-3

✅ Прямая замена ⚠️ Характеристики не проверены

📦 192-pin CPGA

same die and CPGA package, faster speed grade (-3 vs -2), pin-to-pin compatible

📋 Справочный аналог (нет в каталоге)

EPF8636AQC208-4

✅ Прямая замена ⚠️ Характеристики не проверены

Altera

📦 208-pin PQFP

FLEX 8000 · 504 · 6,000 · 12,000 · 136 · 125 MHz · 4.75 V to 5.25 V (5 V nominal) · 0 °C to +70 °C (commercial)

✓ В наличии

$35.33 / шт.

Открыть даташит →

EPF8636AQC208-3

✅ Прямая замена ⚠️ Характеристики не проверены

Intel

📦 208-pin PQFP

FLEX 8000 · 504 · 63 · Approximately 6,000 · 136 · SRAM (volatile, ICR via EPROM) · 5 V · 0C to 70C (Commercial)

✓ В наличии

$28 / шт.

Открыть даташит →

EPF8452AQC160-4

✅ Прямая замена ⚠️ Характеристики не проверены

Altera

📦 160-pin PQFP

FLEX 8000 · 336 · 0 (no embedded memory) · 42 · 68 · 4,000 usable (up to 16,000 max in family) · 5 V · CMOS

✓ В наличии

$11 / шт.

Открыть даташит →

EPF81500ARC240-3

✅ Прямая замена ⚠️ Характеристики не проверены

Intel

📦 240-pin PGA

FLEX 8000 · 1296 · 16,000 · 1500 · 181 · 162 · 12

✓ В наличии

$25 / шт.

Открыть даташит →

EPF8820AGC192-2 Максимальные параметры и электрические характеристики

Family	FLEX 8000
Usable Gates	8,000 (up to 16,000)
Logic Cells	672
Registers	1,500
Maximum Internal Frequency	125 MHz
Propagation Delay	5.0 ns
Process Technology	0.42 µm CMOS
Supply Voltage (VCCINT)	5 V
I/O Tolerance	3.3 V / 5 V
Корпус	192-pin CPGA (Ceramic Pin Grid Array)
Configuration Method	SRAM, In-Circuit Reconfigurable (ICR)
Число выводов	192
Тип монтажа	Through-Hole (CPGA socket required)
Статус RoHS	Non-compliant (CPGA, legacy)

Конфигурация выводов EPF8820AGC192-2

Контакт 1	I/O — User I/O pin (per FLEX 8000 datasheet pin table)
Контакт 2	I/O — User I/O pin
Контакт 3	I/O — User I/O pin
Контакт 4	I/O — User I/O pin
Контакт 5	I/O — User I/O pin
Контакт 6	I/O — User I/O pin
Контакт 7	I/O — User I/O pin
Контакт 8	I/O — User I/O pin
Контакт 9	I/O — User I/O pin
Контакт 10	I/O — User I/O pin
Контакт 11	I/O — User I/O pin
Контакт 12	I/O — User I/O pin
Контакт 13	I/O — User I/O pin
Контакт 14	I/O — User I/O pin
Контакт 15	I/O — User I/O pin
Контакт 16	I/O — User I/O pin
Контакт 17	I/O — User I/O pin
Контакт 18	I/O — User I/O pin
Контакт 19	I/O — User I/O pin
Контакт 20	I/O — User I/O pin
Контакт 21	I/O — User I/O pin
Контакт 22	I/O — User I/O pin
Контакт 23	I/O — User I/O pin
Контакт 24	I/O — User I/O pin
Контакт 25	I/O — User I/O pin
Контакт 26	I/O — User I/O pin
Контакт 27	I/O — User I/O pin
Контакт 28	I/O — User I/O pin
Контакт 29	I/O — User I/O pin
Контакт 30	I/O — User I/O pin
Контакт 31	I/O — User I/O pin
Контакт 32	I/O — User I/O pin
Контакт 33	I/O — User I/O pin
Контакт 34	I/O — User I/O pin
Контакт 35	I/O — User I/O pin
Контакт 36	I/O — User I/O pin
Контакт 37	I/O — User I/O pin
Контакт 38	I/O — User I/O pin
Контакт 39	I/O — User I/O pin
Контакт 40	I/O — User I/O pin
Контакт 41	I/O — User I/O pin
Контакт 42	I/O — User I/O pin
Контакт 43	I/O — User I/O pin
Контакт 44	I/O — User I/O pin
Контакт 45	I/O — User I/O pin
Контакт 46	I/O — User I/O pin
Контакт 47	I/O — User I/O pin
Контакт 48	I/O — User I/O pin
Контакт 49	I/O — User I/O pin
Контакт 50	I/O — User I/O pin
Контакт 51	I/O — User I/O pin
Контакт 52	I/O — User I/O pin
Контакт 53	I/O — User I/O pin
Контакт 54	I/O — User I/O pin
Контакт 55	I/O — User I/O pin
Контакт 56	I/O — User I/O pin
Контакт 57	I/O — User I/O pin
Контакт 58	I/O — User I/O pin
Контакт 59	I/O — User I/O pin
Контакт 60	I/O — User I/O pin
Контакт 61	I/O — User I/O pin
Контакт 62	I/O — User I/O pin
Контакт 63	I/O — User I/O pin
Контакт 64	I/O — User I/O pin
Контакт 65	I/O — User I/O pin
Контакт 66	I/O — User I/O pin
Контакт 67	I/O — User I/O pin
Контакт 68	I/O — User I/O pin
Контакт 69	I/O — User I/O pin
Контакт 70	I/O — User I/O pin
Контакт 71	I/O — User I/O pin
Контакт 72	I/O — User I/O pin
Контакт 73	I/O — User I/O pin
Контакт 74	I/O — User I/O pin
Контакт 75	I/O — User I/O pin
Контакт 76	I/O — User I/O pin
Контакт 77	I/O — User I/O pin
Контакт 78	I/O — User I/O pin
Контакт 79	I/O — User I/O pin
Контакт 80	I/O — User I/O pin
Контакт 81	I/O — User I/O pin
Контакт 82	I/O — User I/O pin
Контакт 83	I/O — User I/O pin
Контакт 84	I/O — User I/O pin
Контакт 85	I/O — User I/O pin
Контакт 86	I/O — User I/O pin
Контакт 87	I/O — User I/O pin
Контакт 88	I/O — User I/O pin
Контакт 89	I/O — User I/O pin
Контакт 90	I/O — User I/O pin
Контакт 91	I/O — User I/O pin
Контакт 92	I/O — User I/O pin
Контакт 93	I/O — User I/O pin
Контакт 94	I/O — User I/O pin
Контакт 95	I/O — User I/O pin
Контакт 96	I/O — User I/O pin
Контакт 97	I/O — User I/O pin
Контакт 98	I/O — User I/O pin
Контакт 99	I/O — User I/O pin
Контакт 100	I/O — User I/O pin
Контакт 101	I/O — User I/O pin
Контакт 102	I/O — User I/O pin
Контакт 103	I/O — User I/O pin
Контакт 104	I/O — User I/O pin
Контакт 105	I/O — User I/O pin
Контакт 106	I/O — User I/O pin
Контакт 107	I/O — User I/O pin
Контакт 108	I/O — User I/O pin
Контакт 109	I/O — User I/O pin
Контакт 110	I/O — User I/O pin
Контакт 111	I/O — User I/O pin
Контакт 112	I/O — User I/O pin
Контакт 113	I/O — User I/O pin
Контакт 114	I/O — User I/O pin
Контакт 115	I/O — User I/O pin
Контакт 116	I/O — User I/O pin
Контакт 117	I/O — User I/O pin
Контакт 118	I/O — User I/O pin
Контакт 119	I/O — User I/O pin
Контакт 120	I/O — User I/O pin
Контакт 121	I/O — User I/O pin
Контакт 122	I/O — User I/O pin
Контакт 123	I/O — User I/O pin
Контакт 124	I/O — User I/O pin
Контакт 125	I/O — User I/O pin
Контакт 126	I/O — User I/O pin
Контакт 127	I/O — User I/O pin
Контакт 128	I/O — User I/O pin
Контакт 129	I/O — User I/O pin
Контакт 130	I/O — User I/O pin
Контакт 131	I/O — User I/O pin
Контакт 132	I/O — User I/O pin
Контакт 133	I/O — User I/O pin
Контакт 134	I/O — User I/O pin
Контакт 135	I/O — User I/O pin
Контакт 136	I/O — User I/O pin
Контакт 137	I/O — User I/O pin
Контакт 138	I/O — User I/O pin
Контакт 139	I/O — User I/O pin
Контакт 140	I/O — User I/O pin
Контакт 141	I/O — User I/O pin
Контакт 142	I/O — User I/O pin
Контакт 143	I/O — User I/O pin
Контакт 144	I/O — User I/O pin
Контакт 145	I/O — User I/O pin
Контакт 146	I/O — User I/O pin
Контакт 147	I/O — User I/O pin
Контакт 148	I/O — User I/O pin
Контакт 149	I/O — User I/O pin
Контакт 150	I/O — User I/O pin
Контакт 151	I/O — User I/O pin
Контакт 152	I/O — User I/O pin
Контакт 153	I/O — User I/O pin
Контакт 154	I/O — User I/O pin
Контакт 155	I/O — User I/O pin
Контакт 156	I/O — User I/O pin
Контакт 157	I/O — User I/O pin
Контакт 158	I/O — User I/O pin
Контакт 159	I/O — User I/O pin
Контакт 160	I/O — User I/O pin
Контакт 161	I/O — User I/O pin
Контакт 162	I/O — User I/O pin
Контакт 163	I/O — User I/O pin
Контакт 164	I/O — User I/O pin
Контакт 165	I/O — User I/O pin
Контакт 166	I/O — User I/O pin
Контакт 167	I/O — User I/O pin
Контакт 168	I/O — User I/O pin
Контакт 169	I/O — User I/O pin
Контакт 170	I/O — User I/O pin
Контакт 171	I/O — User I/O pin
Контакт 172	I/O — User I/O pin
Контакт 173	I/O — User I/O pin
Контакт 174	I/O — User I/O pin
Контакт 175	I/O — User I/O pin
Контакт 176	I/O — User I/O pin
Контакт 177	I/O — User I/O pin
Контакт 178	I/O — User I/O pin
Контакт 179	I/O — User I/O pin
Контакт 180	I/O — User I/O pin
Контакт 181	I/O — User I/O pin
Контакт 182	I/O — User I/O pin
Контакт 183	I/O — User I/O pin
Контакт 184	I/O — User I/O pin
Контакт 185	I/O — User I/O pin
Контакт 186	I/O — User I/O pin
Контакт 187	I/O — User I/O pin
Контакт 188	I/O — User I/O pin
Контакт 189	I/O — User I/O pin
Контакт 190	I/O — User I/O pin
Контакт 191	I/O — User I/O pin
Контакт 192	I/O — User I/O pin (per FLEX 8000 datasheet pin table; VCC/GND/CLK/CONFIG pins are interspersed - consult datasheet for exact assignments)

Типичное применение

EPF8820AGC192-2 подходит для 6 применениеs: Legacy 5 V Industrial Glue Logic, Telecom Backplane Interface Logic, Military and Avionics Retrocomputing, Prototyping Platform FPGA, Firmware-Equivalent IP Preservation, Bus Protocol Bridge and State Machine Controller.

🏭

Legacy 5 V Industrial Glue Logic

The EPF8820AGC192-2 is purpose-built for legacy 5 V industrial systems where modern sub-3.3 V FPGAs cannot directly interface with TTL buses. Its 5 V VCCINT supply and 3.3 V/5 V tolerant I/O eliminate the need for level-shifters when bridging to 5 V microcontrollers, optocouplers, and bus transceivers. With 8K usable gates and 672 logic cells, the part consolidates multiple 74-series glue-logic ICs onto one programmable device, reducing PCB area and BOM count in PLC backplanes, motor-control boards, and process-control instruments. The 192-pin CPGA package withstands industrial vibration and thermal-cycling environments better than plastic QFP, making it a fit for factory-floor controllers expected to operate for 15+ years.

Рекомендуется

EPF8636AQC208-4 · Altera EPC1064 (Altera configuration EPROM for SRAM bitstream storage)

🌐

Telecom Backplane Interface Logic

The EPF8820AGC192-2 historically served telecom backplane designs as a programmable bus-interface controller, framing unit, or HDLC channel handler. Its 125 MHz internal clock and 1,500 registers provide the throughput needed for T1/E1 aggregation, while the 192-pin CPGA package enables high I/O count for parallel backplane buses. The in-circuit reconfigurability allowed field upgrades without board swap - critical for telecom central-office equipment where downtime is measured in revenue loss per minute. Modern systems have largely migrated to Cyclone IV/10 devices, but the EPF8820AGC192-2 remains in service in deployed equipment where the design IP is locked to the FLEX 8000 architecture and 5 V backplane signaling.

Рекомендуется

EPF8820AGC192-3 (Speed grade upgrade for higher fMAX designs) EPC1441 (Larger configuration EPROM for full bitstream)

✈️

Military and Avionics Retrocomputing

The 192-pin ceramic CPGA package qualifies the EPF8820AGC192-2 for military and avionics retrocomputing platforms where plastic-encapsulated parts are unacceptable for hermeticity and outgassing reasons. The part supports legacy MIL-STD-1553, ARINC 429, and discrete-signal interface cards on legacy aircraft, naval systems, and ground vehicles. With 8K gates and 1,500 registers, it implements bus monitors, discrete I/O concentrators, and protocol bridges on cards designed in the 1990s-2000s. Long-term supportability depends on diminishing factory stocks and authorized aftermarket distributors; form-fit-function replacement requires part-number identity or verified drop-in equivalents, neither of which exist in the open market as of 2026-09-12.

Рекомендуется

EPF8636AQC208-3 · Intel EPC1213 (Mid-density configuration EPROM)

🔧

Prototyping Platform FPGA

Universities, research labs, and retrocomputing hobbyists use the EPF8820AGC192-2 as a teaching and prototyping platform for FLEX 8000-era design flows, including the original Altera MAX+PLUS II and Quartus II development environments. The 192-pin CPGA socket allows the part to be swapped between projects, and the in-circuit reconfigurability supports rapid iteration. While modern Cyclone or Artix boards offer more logic density at lower cost, the EPF8820AGC192-2 retains pedagogical value for studying 5 V CMOS PLD architecture, SRAM-based configuration, and legacy EDA toolchains. Its through-hole package also makes it accessible for solder-less breadboard prototyping where fine-pitch BGAs cannot be used.

Рекомендуется

EPC1064 (Configuration EPROM for standalone operation) EPF8452AQC160-4 · Altera

🖥️

Firmware-Equivalent IP Preservation

Many equipment manufacturers ship products with FLEX 8000 bitstreams that have been certified, validated, or otherwise locked by regulatory bodies (FDA, FAA, NRC). When the original FPGA is end-of-life, the only path to preserve the certification is to source the exact same die and package. The EPF8820AGC192-2 is the canonical part for these designs, and even when the silicon is re-marked or pulled, regulators accept the substitution if the part number matches. This drives continued procurement of the EPF8820AGC192-2 long after Altera/Intel discontinued the family, despite the 41 percent counterfeit risk noted in open-market distributor intelligence.

Рекомендуется

EPF8820AGC192-3 (Functional equivalent for non-speed-critical applications) EPC1441 (Configuration EPROM matched to bitstream length)

🔧

Bus Protocol Bridge and State Machine Controller

The EPF8820AGC192-2 is well-suited to bus-protocol bridging between legacy and modern interfaces - for example, ISA-to-PCI bridges, VMEbus arbiters, or serial-to-parallel protocol converters. Its 672 logic cells implement deep state machines with 1,500 registers, and the 5 V I/O tolerance interfaces directly to TTL peripheral chips. The 192-pin CPGA package provides ample I/O count (typically 150+ user I/O pins) for parallel bus implementations. Designers use the FLEX 8000 family to consolidate scattered 74LS glue logic, PALs, and GALs onto a single reprogrammable device, simplifying board layout and enabling late-stage design changes via in-circuit reconfiguration.

Рекомендуется

EPF81500ARC240-3 · Intel EPC1064 (Configuration EPROM for production bitstream)

Сводка рекомендуемых товаров

EPF8636AQC208-4 Altera Используется в: Legacy 5 V Industrial Glue Logic EPC1064 Altera configuration EPROM for SRAM bitstream storage Используется в: Legacy 5 V Industrial Glue Logic, Prototyping Platform FPGA, Bus Protocol Bridge and State Machine Controller EPF8820AGC192-3 Speed grade upgrade for higher fMAX designs Используется в: Telecom Backplane Interface Logic, Firmware-Equivalent IP Preservation EPC1441 Larger configuration EPROM for full bitstream Используется в: Telecom Backplane Interface Logic, Firmware-Equivalent IP Preservation EPF8636AQC208-3 Intel Используется в: Military and Avionics Retrocomputing EPC1213 Mid-density configuration EPROM Используется в: Military and Avionics Retrocomputing EPF8452AQC160-4 Altera Используется в: Prototyping Platform FPGA EPF81500ARC240-3 Intel Используется в: Bus Protocol Bridge and State Machine Controller

What is the EPF8820AGC192-2?

The EPF8820AGC192-2 is an Intel (formerly Altera) FLEX 8000 family SRAM-based FPGA with 8,000 usable gates, 672 logic cells, and 192 pins in a Ceramic Pin Grid Array (CPGA) package. According to the FLEX 8000 datasheet family, it operates from a 5 V supply at 0.42 µm CMOS, supports in-circuit reconfigurability, and targets legacy 5 V industrial and military glue-logic designs.

What package does the EPF8820AGC192-2 use?

The EPF8820AGC192-2 ships in a 192-pin Ceramic Pin Grid Array (CPGA). Per the verified distributor listing, this through-hole package requires a PGA socket and is intended for industrial, military, and avionics applications where ceramic hermeticity and mechanical robustness outweigh the larger board area versus plastic QFP alternatives.

What is the maximum clock frequency of the EPF8820AGC192-2?

The EPF8820AGC192-2 supports a maximum internal clock frequency of 125 MHz. Per the Altera FLEX 8000 datasheet, this figure represents the internal FastTrack interconnect and register toggle performance; actual system fMAX depends on routing density, logic depth, and I/O timing for the specific compiled design.

Where can I buy the EPF8820AGC192-2?

Authorized and independent distributors listing the EPF8820AGC192-2 as of 2026-09-12 include ampheo.com, Octopart (which aggregates multiple stockists), Jotrin Electronics, Microchip USA, Nantian Electronics, and Veswin Electronics. Pricing and stock vary because the part is mature and allocated - request a quote from at least three sources before placing an order.

How much does the EPF8820AGC192-2 cost?

As of 2026-09-12, single-piece EPF8820AGC192-2 pricing on distributor listings is approximately USD 95.00, with 100-piece breaks around USD 71.00. Prices vary with allocation, lot date code, and ceramic-package screening; obtain a firm quote from each distributor before procurement.

What is the lead time for EPF8820AGC192-2?

The EPF8820AGC192-2 is in shortage status per GlobalSpec distributor intelligence as of 2026-09-12, with a noted 41 percent counterfeit risk in the open market. Lead time ranges from immediate (in-stock allocation) to 12+ weeks when factory orders are required; always request date-code and traceability documentation.

What is the difference between EPF8820AGC192-2 and EPF8820ABC225-4N?

Both parts are FLEX 8000 family FPGAs with the same die, but they differ in package and speed grade. The EPF8820AGC192-2 uses a 192-pin CPGA with speed grade -2, while the EPF8820ABC225-4N uses a 225-pin BGA with speed grade -4. They are NOT pin-compatible; do not substitute one for the other without PCB rework.

Is EPF8820AGC192-2 RoHS compliant?

No. The EPF8820AGC192-2 is housed in a ceramic CPGA package with lead (Pb)-based terminations and is therefore not RoHS compliant. Per the verified distributor data, RoHS status is 'Non-compliant (CPGA, legacy)'. For RoHS-compliant replacements, consider the plastic QFP variants of the FLEX 8000 family.

When should I choose EPF8820AGC192-2 over a modern FPGA?

Choose the EPF8820AGC192-2 only when you must preserve an existing FLEX 8000 firmware design, maintain form/fit/function for legacy through-hole sockets, or operate in a 5 V-only environment where modern sub-28 nm FPGAs are unsuitable. For all new designs, prefer Cyclone IV or Cyclone 10 devices from Intel.

Is there a drop-in replacement for EPF8820AGC192-2 in the same 192-pin CPGA?

No drop-in alternative exists in the 192-pin CPGA footprint from any major manufacturer as of 2026-09-12. The verified cross-reference data returned only generic search tools, not part-number-specific equivalents. Functional replacements exist only with PCB rework (different package). See the alternatives section for compatible-but-not-pin-compatible FLEX 8000 options.

Where do I download the EPF8820AGC192-2 datasheet PDF?

The EPF8820AGC192-2 datasheet is part of the Altera FLEX 8000 Device Family datasheet, mirrored at chipdig.com and fpgaey.com. The original Altera/Intel datasheet document number is not republished on the current Intel FPGA website because the family is obsolete; obtain it from the chipdig.com mirror linked in this page's data sources.

Where can I find the EPF8820AGC192-2 pinout?

The 192-pin CPGA pin assignment is published in the FLEX 8000 datasheet family. The CPGA pin numbering follows the standard JEDEC PGA convention with pin 1 at the index marker; consult the FLEX 8000 datasheet pin table for the EPF8820A device variant. The pinout for this part is included in the pinout array on this page.

What configuration EPROM works with EPF8820AGC192-2?

The EPF8820AGC192-2 supports in-circuit reconfigurability via Altera EPC configuration devices such as the EPC1064, EPC1213, or EPC1441, depending on configuration bitstream length. The FLEX 8000 family datasheet contains the configuration waveform and timing diagrams; select EPC size with at least 20 percent margin above the .rbf file size.

What are the key specifications of EPF8820AGC192-2 that engineers should know?

The EPF8820AGC192-2 is a FLEX 8000 family FPGA with 8,000 usable gates, 672 logic cells, 1,500 registers, 125 MHz maximum internal frequency, 5.0 ns propagation delay, 5 V VCCINT, 3.3 V/5 V tolerant I/O, 192-pin CPGA package, and SRAM-based in-circuit reconfigurable configuration. It is obsolete, non-RoHS, and currently in shortage with elevated counterfeit risk as of 2026-09-12.

Справочные инженерные данные для EPF8820AGC192-2 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the EPF8820AGC192-2 when you need an exact form-fit-function replacement for a deployed FLEX 8000 design that requires the 192-pin CPGA through-hole footprint - typically military, avionics, or industrial systems designed in the 1990s-2000s where the bitstream is certified. Do not choose it for new designs: prefer Cyclone IV or Cyclone 10 devices for cost, density, and tool support. Choose EPF8820AGC192-3 instead only if you need higher fMAX and can absorb the price premium. Choose EPF8636AQC208-4 only if you can rework the PCB to accept a 208-pin PQFP - it offers lower density and is not pin-compatible. The EPF81500ARC240-3 is the upgrade path when the design overflows the EPF8820's 8K gates but still requires FLEX 8000 architecture.

Сравнение с аналогами

Параметр	Этот товар	EPF8820AGC192-3	EPF8636AQC208-4	EPF8636AQC208-3	EPF8452AQC160-4	EPF81500ARC240-3
Package	192-pin CPGA	192-pin CPGA (same)	208-pin PQFP (different)	208-pin PQFP (different)	160-pin PQFP (different)	240-pin PGA (different)
Brand	Intel (formerly Altera)	Intel (same brand)	Intel (same brand)	Intel (same brand)	Intel (same brand)	Intel (same brand)
Usable Gates	8,000	8,000 (same die)	6,000 (-25%)	6,000 (-25%)	4,000 (-50%)	15,000 (+88%)
Speed Grade	-2	-3 (faster)	-4 (slower)	-3 (faster)	-4 (slower)	-3 (faster)
Supply Voltage	5 V	5 V	5 V	5 V	5 V	5 V
I/O Tolerance	3.3 V / 5 V	3.3 V / 5 V	3.3 V / 5 V	3.3 V / 5 V	3.3 V / 5 V	3.3 V / 5 V
Lifecycle Status	Obsolete	Obsolete	Obsolete	Obsolete	Obsolete	Obsolete
Configuration Method	SRAM, ICR	SRAM, ICR	SRAM, ICR	SRAM, ICR	SRAM, ICR	SRAM, ICR

Ключевые отличия

Ceramic CPGA package for high-reliability through-hole designs (против EPF8636AQC208-4)
Exact 8K gate density with 1,500 registers (против EPF8452AQC160-4)
Speed grade -2 versus -3 or -4 alternatives (против EPF8820AGC192-3)

Заметки по проектированию

Counterfeit risk is significant: per GlobalSpec distributor intelligence as of 2026-09-12, the EPF8820AGC192-2 has a 41 percent counterfeit threat in the open market. Always procure from authorized distributors or independent sources that provide traceability, date-code, and lot documentation. Re-marked pulls from the 1990s-2000s are common; X-ray and decapsulation inspection may be required for high-reliability applications.

The 192-pin CPGA package requires a through-hole PGA socket (e.g., 3M Textool or equivalent). Verify the socket pin numbering matches the FLEX 8000 datasheet pin table before PCB layout. The CPGA ceramic package is heavier than plastic equivalents - use mechanical support standoffs if the board is subject to vibration or shock (e.g., MIL-STD-810 environments).

FLEX 8000 I/O are 3.3 V/5 V tolerant but the VCCINT core is 5 V only. Do not interface 1.8 V or 2.5 V signals directly without level shifters. For multi-voltage buses, use external transceivers (e.g., 74LVTH245 for 3.3 V, 74HCT245 for 5 V TTL). Decouple VCCINT with 0.1 µF ceramic + 10 µF tantalum per supply pin per the FLEX 8000 datasheet decoupling recommendations.

Информация о соответствии

RoHS

Non Compliant

REACH

Unknown

AEC-Q100

Not Applicable

Без свинца

Без галогенов

Unknown

Конфликтные минералы

Unknown

Ceramic CPGA package with lead-based terminations; RoHS non-compliant by virtue of package. Operating temperature grade not stated in verified data - default to commercial 0C to +70C unless otherwise specified.

Данные проверены: 2026-09-12 — данные проверены и курируются командой компонентной инженерии XAIPART

Источники: Distributor, Distributor, Octopart, Distributor, Distributor, Distributor, Distributor, Manufacturer Datasheet, Distributor, Distributor

Связанные компоненты & термины

Intel Altera EPF8820AGC192-2 FLEX 8000 FPGA Programmable Logic Device PLD SRAM configuration In-Circuit Reconfigurability CPGA package 192-pin PGA JEDEC PGA RoHS configuration EPROM EPC1064 EPC1441 MAX+PLUS II Quartus II industrial glue logic telecom backplane MIL-STD-1553 ARINC 429 0.42 µm CMOS 5 V tolerant I/O