EPM5192GM-1/883B - 192-Cell UV PLD, 55ns, CPGA-84 Military | Intel
Артикул: EPM5192GM-1/883B ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $260 | $2.600,00 |
| 100 | $230 | $23.000,00 |
| 500 | $210 | $105.000,00 |
| 1.000 | $195 | $195.000,00 |
EPM5192GM-1/883B Обзор
A Programmable Logic Device (PLD) is a digital IC whose logic function is defined after manufacturing, allowing engineers to implement custom glue logic, state machines, and bus interfacing without fabricating a full ASIC. The MAX 5000 family sits in Altera's classic PLD hierarchy between the smaller MAX 3000 (EPM3xxx) and the larger MAX 7000 (EPM7xxx), targeting high-density designs that exceed simple SPLD (PAL/GAL) capacity. This product type hierarchy runs PLD -> programmable logic -> logic IC -> integrated circuit -> semiconductor, giving the part broad coverage in digital logic taxonomies.
Key features of the EPM5192GM-1/883B include 192 logic macrocells, a maximum pin-to-pin propagation delay of 55ns, and an erasable windowed ceramic package for prototype and reprogrammable production use. The /883B suffix indicates full MIL-STD-883B processing for high-reliability military and aerospace programs, with the operating temperature range extending across -55C to +125C. The CPGA-84 package provides robust mechanical and thermal performance for harsh-environment systems.
Technically, the device uses Altera's classic EEPROM/UV-CMOS MAX architecture with a programmable AND/OR array and dedicated macrocell flip-flops. The 55ns tPD places it in the medium-speed tier suitable for control logic, bus interfacing, and glue logic rather than high-speed datapath applications. The 192 macrocells and high I/O count make it one of the larger classic PLDs of its era.
Typical applications include military and aerospace digital control systems, industrial control logic, legacy avionics and radar signal processing interface logic, defense telemetry equipment, and MIL-spec replacement of obsolete 54xx TTL logic arrays. Engineers use it where high reliability, -55C to +125C operation, and high-density PLD logic are required.
Design considerations include the UV-erase window requiring a quartz-windowed package for reprogramming, which is slower than EEPROM-based modern PLDs. Designers must budget for the 55ns propagation delay when interfacing to faster buses. Use Altera's MAX+PLUS II development toolchain for design entry, fitting, and programming.
This page synthesizes distributor stock data, same-family Altera drop-in alternatives, and design guidance not consolidated in the original datasheet, giving procurement and engineering teams a single reference.
Аналоги без доработки для EPM5192GM-1/883B — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EPM5192GM-1/883B (тот же форм-фактор и посадочное место) — отличается по Package, Device Type, Mounting Type, Process Technology, Propagation Delay (tPD).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EPM5192GM/883B
✅ Прямая замена✓ В наличии
$118 / шт.
Открыть даташит →EPM5192GM-1
✅ Прямая замена✓ В наличии
$27.8 / шт.
Открыть даташит →EPM5192GI-1
✅ Прямая замена✓ В наличии
$165 / шт.
Открыть даташит →EPM5192GC-1
✅ Прямая замена✓ В наличии
$17.85 / шт.
Открыть даташит →EPM5192GC84-1
✅ Прямая замена✓ В наличии
$14.2 / шт.
Открыть даташит →EPM5192GI84
✅ Прямая замена✓ В наличии
$19.8 / шт.
Открыть даташит →EPM5192GM-1/883B Максимальные параметры и электрические характеристики
| Device Family | MAX 5000 |
| Product Type | UV-Erasable PLD (EPLD) |
| Logic Cells / Macrocells | 192 |
| Propagation Delay (tPD) | 55 ns |
| Technology | CMOS, UV-erasable |
| Корпус | CPGA-84 (Windowed Ceramic PGA) |
| Тип монтажа | Through-Hole (PGA) |
| Рабочая температура | -55C to +125C (Military) |
| Military Processing | MIL-STD-883B |
| Напряжение питания | 5 V |
| Programming Method | UV Erase + EPROM programming |
| Erase Method | UV light through quartz window |
| Уровень MSL | Not Applicable (through-hole ceramic) |
Руководство по цоколевке EPM5192GM-1/883B в корпусе cpga-84 (windowed ceramic pga)
Цоколевка для EPM5192GM-1/883B (корпус cpga-84 (windowed ceramic pga)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EPM5192GM-1/883B.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EPM5192GM-1/883B подходит для 6 применениеs: Military Avionics Control Logic, Defense Radar Signal Processing Interface, Industrial Control Logic Replacement, Legacy Aerospace Telemetry Systems, MIL-Spec 54xx TTL Replacement, Spacecraft Payload Interface Electronics.
Military Avionics Control Logic
The EPM5192GM-1/883B is well-suited to military avionics control logic where MIL-STD-883B processing and -55C to +125C operation are required. Its 192 macrocells and 55ns propagation delay handle state-machine sequencing, bus arbitration, and discrete I/O expansion in flight-control and mission-computer subsystems. The CPGA-84 ceramic package withstands vibration and thermal cycling typical of airborne platforms, while the UV-erasable window allows field re-programming during system upgrades.
Рекомендуется
Defense Radar Signal Processing Interface
In defense radar systems the EPM5192GM-1/883B implements high-density glue logic between data converters, DSP processors, and timing generators. Its 192 macrocells comfortably hold multi-channel FIFO control, handshaking logic, and interrupt steering required by modern AESA radar front-ends. The 55ns tPD is adequate for slow-control paths while MIL-STD-883B screening guarantees reliable operation across the radar's thermal envelope. Legacy radar programs continue to rely on this part for sustainment.
Рекомендуется
Industrial Control Logic Replacement
For industrial control systems that must retain legacy form-fit-function, the EPM5192GM-1/883B offers 192 macrocells of programmable logic with a -55C to +125C operating range. It is used to replace obsolete 54xx TTL logic arrays, consolidating scattered gates into a single package. The CPGA-84 through-hole footprint is well-suited to ruggedized industrial backplanes and is compatible with conformal coating and potting processes.
Рекомендуется
Legacy Aerospace Telemetry Systems
Legacy aerospace telemetry units that must remain in service for decades benefit from the EPM5192GM-1/883B's MIL-STD-883B processing and proven MAX 5000 architecture. It handles data framing, command decoding, and serial-to-parallel conversion in telemetry front-ends. The UV window permits in-lab reprogramming as mission requirements evolve, while the ceramic package ensures long-term hermeticity. Sustainment programs frequently source this part as a like-for-like replacement of aging telemetry hardware.
Рекомендуется
MIL-Spec 54xx TTL Replacement
The EPM5192GM-1/883B is widely used as a MIL-spec replacement for racks of 54xx TTL logic on defense electronics cards. A single 192-macrocell PLD can replace dozens of discrete TTL packages, reducing board area, weight, and power while maintaining MIL-STD-883B screening. Designers can re-implement decoders, multiplexers, counters, and state machines in a single windowed ceramic device, simplifying logistics and obsolescence management on long-life programs.
Рекомендуется
Spacecraft Payload Interface Electronics
In spacecraft payload subsystems, the EPM5192GM-1/883B provides reliable high-density logic for instrument interfaces, command decoders, and telemetry gatherers. Its MIL-STD-883B processing and wide operating range make it attractive for upper-atmosphere and LEO missions where qualified parts lists are mandatory. The UV-erasable window allows ground re-programming during integration and test, while the ceramic PGA package offers excellent outgassing performance after bake-out.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EPM5192GM-1/883B — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EPM5192GM/883B | EPM5192GM-1 | EPM5192GI-1 | EPM5192GC-1 | EPM5192GC84-1 | EPM5192GI84 |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | CPGA-84 (Windowed Ceramic) | CPGA-84 - same | CPGA-84 - same | CPGA-84 - same | CPGA-84 - same | CPGA-84 - same | CPGA-84 - same |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 | 192 |
| Propagation Delay (tPD) | 55 ns | 55 ns | 55 ns | 55 ns | 55 ns | 55 ns | 55 ns |
| Temperature Grade | Military (-55C to +125C) | Military (-55C to +125C) | Commercial (0C to +70C) | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Industrial (-40C to +85C) |
| MIL-STD-883B Processing | Yes | Yes | No | No | No | No | No |
| Technology | CMOS UV-Erasable | CMOS UV-Erasable | CMOS UV-Erasable | CMOS UV-Erasable | CMOS UV-Erasable | CMOS UV-Erasable | CMOS UV-Erasable |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Ключевые отличия
- Full MIL-STD-883B military processing and -55C to +125C operating range (против EPM5192GM-1)
- 192 macrocells provide the highest logic density in the MAX 5000 family (против EPM5128GM/883B)
- Windowed ceramic PGA allows UV erasure and field reprogramming (против EPM5192GC84-1)
Заметки по проектированию
The CPGA-84 ceramic package provides robust thermal performance, but in a socketed or high-density board layout the designer must still verify junction temperature under worst-case DC and switching loads. With typical 5V CMOS power and 192 macrocells switching simultaneously, average supply current can rise to several hundred mA. Use thermal vias under the PGA footprint and ensure airflow across the package in sealed enclosures to keep Tj within the -55C to +125C military operating range. Estimated: at 250mA ICC and 5V, the package dissipates roughly 1.25W; consult the Altera MAX 5000 datasheet for thermal-resistance figures.
Because the EPM5192GM-1/883B uses a through-hole CPGA-84 socket or soldered pin-grid footprint, plan PCB layout for plated-through-hole pads with sufficient annular ring to survive thermal cycling and rework. Decoupling capacitors (0.1uF ceramic plus 10uF tantalum) must be placed within 5mm of each VCC/ground pin pair to suppress switching noise. The UV window requires sufficient board clearance above the package for the eraser lamp; avoid tall components directly above the device.
Do not assume the EPM5192GM-1/883B can be programmed in-circuit using modern Intel/Altera tools - it requires the legacy MAX+PLUS II toolchain and an Altera Logic Programmer card or compatible programmer. Verify the device is fully UV-erased before reprogramming; partial erasure can cause unpredictable logic. Also note that commercial-grade EPM5192GM-1 variants are NOT MIL-STD-883B screened and cannot substitute in qualified military designs.
Route all I/O signals on inner PCB layers where possible to minimize crosstalk on the PGA's outer pin rows, and keep high-speed outputs short and impedance-controlled. The MAX 5000 family's 55ns tPD is forgiving for slow control logic but cannot drive long unterminated traces at high toggle rates. Place series damping resistors on outputs driving long cables to reduce ringing in defense environments.
Информация о соответствии
Compliance data not provided in verified web data. RoHS/REACH/lead-free status marked unknown pending certificate retrieval from distributor. AEC-Q100 is not applicable (automotive-grade standard) - the part is MIL-STD-883B screened, which is a different qualification regime.
