EPM5192GM883B-2 - 192-Macrocell UV PLD 45ns | Intel / Altera MAX 5000
Артикул: EPM5192GM883B-2 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $245 | $2.450,00 |
| 100 | $198 | $19.800,00 |
| 500 | $168 | $84.000,00 |
| 1.000 | $142 | $142.000,00 |
EPM5192GM883B-2 Обзор
A CPLD (Complex Programmable Logic Device) is a non-volatile, instantly-on digital logic device that combines multiple PLA-style macrocell blocks on a single chip with a programmable interconnect fabric. In the broader taxonomy, the CPLD sits below FPGAs in density, above discrete 74-series logic in integration, and is typically used for glue logic, bus interfacing, state-machine decoding, and boot-loader bridges where deterministic propagation delay and <100 ns pin-to-pin response matter more than raw gate count.
The defining features of the EPM5192GM883B-2 are its 192 macrocells (each containing a programmable AND/OR array and a flip-flop), 45 ns worst-case pin-to-pin propagation delay (-2 speed grade), 33.3 MHz maximum internal clock frequency, and 5 V nominal VCC. The 'GM883' suffix denotes a ceramic CPGA package rated to MIL-STD-883 environmental and reliability conditions, while the '-2' indicates the second (faster) speed bin. Together, these attributes place the part in the high-reliability / military temperature range targeting defense and aerospace programs.
Architecturally, the device organizes its 192 macrocells into multiple Logic Array Blocks (LABs) interconnected by a programmable switch matrix, with seven dedicated input pins feeding every LAB to minimize input skew. The 5 V CMOS process yields high noise margin and TTL-compatible I/O, which is essential when the part is used as a 5 V bus bridge in legacy mixed-voltage systems.
Typical applications include 5 V bus arbitration logic in VMEbus and MIL-STD-1553 backplanes, military and aerospace control subsystems, legacy peripheral glue for Motorola 68000 and Intel x86 CPU boards, deterministic state-machine controllers, and industrial control where UV-reprogrammability and JAN-qualified packaging are procurement requirements. The 45 ns tPD also makes it suitable for slow-but-deterministic address decoding where an FPGA would be overkill.
When designing with this part, note that the 'GM883' CPGA package requires a through-hole PGA socket (PGA-84) and a socket extraction tool; reflow soldering is not an option. Designers must also budget the UV-erase cycle (typically 30-60 minutes of 12,000 uW/cm² UV exposure at 253.7 nm) and provision a top-of-package quartz window in the production enclosure if in-system reprogramming is anticipated.
This page consolidates distributor pricing, drop-in equivalents, and application notes for the EPM5192GM883B-2 that go beyond the legacy MAX 5000 datasheet, helping engineers validate long-term availability and source military-grade alternates.
Аналоги без доработки для EPM5192GM883B-2 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EPM5192GM883B-2 (тот же форм-фактор и посадочное место) — отличается по Package, Device Type, Programming Method, Mounting Type, Propagation Delay (tPD).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EPM5192GM883B
✅ Прямая замена✓ В наличии
$142 / шт.
Открыть даташит →EPM5192GM/883B
✅ Прямая замена✓ В наличии
$118 / шт.
Открыть даташит →EPM5192GM-2/883B
✅ Прямая замена✓ В наличии
$195 / шт.
Открыть даташит →EPM5192GM-2
✅ Прямая замена✓ В наличии
$92 / шт.
Открыть даташит →EPM5192GM-1/883B
✅ Прямая замена✓ В наличии
$195 / шт.
Открыть даташит →EPM5192GM/883
✅ Прямая замена✓ В наличии
$125 / шт.
Открыть даташит →EPM5192GM
✅ Прямая замена✓ В наличии
$58 / шт.
Открыть даташит →EPM5192GM883B-2 Максимальные параметры и электрические характеристики
| Family | MAX 5000 |
| Device Type | CPLD (Complex Programmable Logic Device), UV-erasable |
| Macrocells | 192 |
| Propagation Delay (tPD) | 45 ns (-2 speed grade) |
| Maximum Internal Clock Frequency | 33.3 MHz |
| Supply Voltage (VCC, nominal) | 5 V |
| Technology | 5 V CMOS |
| Dedicated Inputs | 7 |
| User I/O Pins | 64 |
| Корпус | 84-pin Ceramic Pin Grid Array (CPGA), code S-CPGA-P84 |
| Package Outline | 28.45 mm square (approx.) |
| Military Screening | MIL-STD-883 (per '883' suffix) |
| Тип монтажа | Through-hole PGA socket |
| Статус RoHS | non_compliant (ceramic CPGA with MIL-STD-883 screening) |
| JEDEC Package Code | S-CPGA-P84 |
Конфигурация выводов EPM5192GM883B-2
| Контакт 1 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 2 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 3 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 4 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 5 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 6 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 7 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 8 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 9 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 10 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 11 | GND — Ground reference |
| Контакт 12 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 13 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 14 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 15 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 16 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 17 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 18 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 19 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 20 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 21 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 22 | GND — Ground reference |
| Контакт 23 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 24 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 25 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 26 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 27 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 28 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 29 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 30 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 31 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 32 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 33 | GND — Ground reference |
| Контакт 34 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 35 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 36 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 37 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 38 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 39 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 40 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 41 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 42 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 43 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 44 | GND — Ground reference |
| Контакт 45 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 46 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 47 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 48 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 49 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 50 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 51 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 52 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 53 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 54 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 55 | GND — Ground reference |
| Контакт 56 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 57 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 58 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 59 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 60 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 61 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 62 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 63 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 64 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 65 | I/O — User I/O pin (macrocell-backed bidirectional) |
| Контакт 66 | GND — Ground reference |
| Контакт 67 | IN — Dedicated input pin (one of 7) |
| Контакт 68 | IN — Dedicated input pin (one of 7) |
| Контакт 69 | IN — Dedicated input pin (one of 7) |
| Контакт 70 | IN — Dedicated input pin (one of 7) |
| Контакт 71 | IN — Dedicated input pin (one of 7) |
| Контакт 72 | IN — Dedicated input pin (one of 7) |
| Контакт 73 | IN — Dedicated input pin (one of 7) |
| Контакт 74 | VCC — 5 V supply voltage |
| Контакт 75 | OE — Output enable (global, programmable polarity) |
| Контакт 76 | CLK — Global clock input |
| Контакт 77 | CLR — Global clear (programmable polarity) |
| Контакт 78 | NC — Not connected (per datasheet) |
| Контакт 79 | NC — Not connected (per datasheet) |
| Контакт 80 | NC — Not connected (per datasheet) |
| Контакт 81 | NC — Not connected (per datasheet) |
| Контакт 82 | NC — Not connected (per datasheet) |
| Контакт 83 | NC — Not connected (per datasheet) |
| Контакт 84 | NC — Not connected (per datasheet) |
Типичное применение
EPM5192GM883B-2 подходит для 6 применениеs: VMEbus Address-Decoding Logic, MIL-STD-1553 Interface Glue Logic, Motorola 68000 Bus Arbitration Logic, Industrial PLC State-Machine Controllers, Legacy Avionics Display Drivers, Test & Measurement Instrument Front Panels.
VMEbus Address-Decoding Logic
The EPM5192GM883B-2's 192 macrocells and 45 ns tPD make it a strong fit for VMEbus backplane address decoding in legacy military and aerospace systems. Each macrocell provides a programmable AND/OR term and a flip-flop, so 16-bit to 32-bit address decode plus board-ID latches fit comfortably. Compared to discrete 22V10 PALs, the part replaces 4-6 devices with one, reducing board area and improving noise margin. The 5 V CMOS I/O is TTL-compatible with VMEbus drivers and receivers. Designers should budget 30 ns for address-to-decode latency, leaving margin for downstream bus transceivers.
Рекомендуется
MIL-STD-1553 Interface Glue Logic
In MIL-STD-1553 databus terminals, the EPM5192GM883B-2 handles Manchester encoder/decoder glue, RT-address validation, and bus-controller arbitration. Its 5 V CMOS I/O interfaces directly to DDC's BUS-61553 and BUS-61554 protocol chips without level shifters, simplifying the analog/digital boundary. The 33.3 MHz maximum internal clock supports 1 MHz 1553 bit-rate logic with comfortable timing margin. The ceramic CPGA-84 MIL-STD-883 screening is mandatory for airborne LRUs (Line Replaceable Units) per MIL-HDBK-454. Designers must shield the package's quartz window from UV exposure if not using UV erasure.
Рекомендуется
Motorola 68000 Bus Arbitration Logic
Legacy Motorola 68000 and 68020 CPU boards rely on the EPM5192GM883B-2 for bus arbitration, DTACK generation, and interrupt priority encoding. Its 45 ns tPD is well within the 68000's 8 MHz bus cycle (125 ns period) and provides ample margin for the address-to-DTACK handshake. The seven dedicated inputs feed every LAB, so VPA, VPB, and address strobes can be routed with minimal skew. Compared to discrete 74LS148/74LS139 logic, the part replaces 6-8 SSI packages, reducing power consumption and improving reliability in industrial-control CPUs.
Рекомендуется
Industrial PLC State-Machine Controllers
The EPM5192GM883B-2 is well suited to industrial PLC ladder-logic replacement where deterministic state-machine behavior is required. Each macrocell's flip-flop supports one-hot or Gray-coded state bits, and the 192-cell capacity covers 16-24 state machines of moderate complexity. The 45 ns tPD enables 50 kHz scan rates typical of mid-range PLCs, while the 5 V supply aligns with legacy 24 V-to-5 V industrial backplanes. The MIL-STD-883 screening supports harsh-environment deployments such as mining, oil-and-gas, and rail signaling. Designers should add external watchdog logic for fault-tolerant operation.
Рекомендуется
Legacy Avionics Display Drivers
In legacy avionics such as MIL-STD-704 28 V cockpit displays, the EPM5192GM883B-2 generates timing waveforms, character ROM addressing, and CRT/LCD row-multiplex signals. Its 5 V CMOS I/O drives 74HC-series buffer gates directly, and the 64 user I/Os cover 8-character x 16-row displays with timing generation. The 45 ns propagation delay supports 70 Hz non-interlaced refresh with comfortable margin. The MIL-STD-883 ceramic package meets DO-160 environmental requirements for cockpit equipment. Designers should debounce mechanical switches with external RC networks, as the part has no internal Schmitt triggers on all inputs.
Рекомендуется
Test & Measurement Instrument Front Panels
The EPM5192GM883B-2 is a strong fit for test-and-measurement front-panel logic, including key-scan encoders, rotary-quadrature decoders, and range-relay drivers. Its 192 macrocells support 8-12 front-panel functions with knob/switch debouncing implemented in hardware, freeing the main processor from interrupt overhead. The 5 V supply simplifies integration with legacy ADC/DAC front-ends, and the 64 user I/Os handle 32-key keypads plus 16 indicator LEDs. The NRND status means new designs should plan for migration to MAX V 5M240ZE64, but legacy instruments in production can maintain spare-parts inventory through authorized distributors.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EPM5192GM883B-2 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EPM5192GM883B | EPM5192GM/883B | EPM5192GM-2/883B | EPM5192GM-2 | EPM5192GM-1/883B |
|---|---|---|---|---|---|---|
| Package | 84-pin CPGA (S-CPGA-P84) | 84-pin CPGA - same | 84-pin CPGA - same | 84-pin CPGA - same | 84-pin CPGA - same | 84-pin CPGA - same |
| Brand | Altera (now Intel) | Altera (now Intel) | Altera (now Intel) | Altera (now Intel) | Altera (now Intel) | Altera (now Intel) |
| Propagation Delay (tPD) | 45 ns (-2 grade) | 55 ns (-1 grade) | 55 ns | 45 ns (-2 grade) | 45 ns (-2 grade, no 883) | 55 ns (-1 grade) |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 |
| MIL-STD-883 Screening | Yes (per '883' suffix) | Yes | Yes | Yes | No (commercial) | Yes |
| Max Internal Clock Frequency | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz |
| User I/O Pins | 64 | 64 | 64 | 64 | 64 | 64 |
| Supply Voltage (VCC) | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Approx. Unit Cost (qty 100, USD, as of 2026-09-12) | 198.00 | 168.00 (lower; same speed-grade drop) | 165.00 (estimated, alternate P/N) | 198.00 (same speed; alternate P/N) | 98.00 (commercial screening, no 883) | 168.00 (slower -1 grade) |
Ключевые отличия
- MIL-STD-883 screening with -2 (faster) speed grade (против EPM5192GM883B)
- Same 192-macrocell die across all EPM5192GM variants (против EPM5192AQC100-15)
- 84-pin ceramic CPGA package for aerospace-grade thermal cycling (против EPM5192GC84-1)
Заметки по проектированию
The 84-pin CPGA (JESD-30 code S-CPGA-P84) package requires a through-hole PGA-84 socket (e.g., 3M Textool or equivalent) and a pin-extraction tool; surface-mount reflow is impossible. Reserve at least 50 mm x 50 mm of board area per device, including 5 mm perimeter for socket flange and tooling access. The PGA socket adds approximately 15 nH of lead inductance per pin, which may require 0.1 uF decoupling capacitors within 5 mm of each VCC/GND pair to suppress switching transients from the 5 V CMOS output stages.
The 'GM883' suffix guarantees MIL-STD-883 environmental and reliability screening, NOT extended temperature grade. Verify the full datasheet ordering code for the temperature range (typically -55C to +125C for MIL-883 Class B) before deployment in aerospace or downhole applications. JAN-traceable material requires a separate Certificate of Conformance (CoC) from the authorized distributor. Designers commonly confuse '883B' (MIL-STD-883 Class B screening) with 'JAN' (Joint Army-Navy qualified), which is a stricter specification that this part does NOT carry by default.
Estimated: at 33.3 MHz internal clock with all 192 macrocells toggling at 50% duty cycle into 50 pF loads, the EPM5192GM883B-2 dissipates approximately 1.2 W (calculated from 5 V x 240 mA typical Icc for fully loaded MAX 5000 family parts). The CPGA-84 package has theta-JA of approximately 30 C/W in still air, yielding a 36 C junction temperature rise above ambient at 25 C. Above 70 C ambient, derate the clock by 1% per Celsius or add a clip-on heatsink. Verify with the manufacturer's thermal characterization data for the specific screening level.
Place the PGA-84 socket footprint on a 2.54 mm grid with 0.46 mm plated through-holes, leaving at least 1 mm of annular ring for high-vibration environments. Route all 64 user I/Os and seven dedicated inputs on inner board layers to minimize crosstalk, and place a continuous ground plane on the layer immediately beneath the socket to provide low-impedance return paths. The MAX 5000 family is sensitive to VCC ripple above 50 mV peak-to-peak; add 10 uF tantalum plus 0.1 uF ceramic decoupling within 5 mm of each VCC pin cluster (pins 11, 22, 33, 44, 55, 66, 74 are typical VCC/GND assignments).
The EPM5192GM883B-2 is a 5 V CMOS device with TTL-compatible I/O, but its 45 ns edge rates (approximately 2-3 ns rise/fall at 50 pF load) generate harmonics above 100 MHz that can couple into adjacent analog traces. For mixed-signal boards, route analog signals at least 10 mm away from CPLD I/O traces and place a ground-guard trace between them. The seven dedicated inputs are not Schmitt-triggered; add external RC debouncing (10 kohm + 100 pF gives 1 us time constant) for mechanical-switch interfaces.
Информация о соответствии
Ceramic CPGA package with MIL-STD-883 screening contains lead-bearing solder terminations and is non-RoHS by design. The part is used in defense/aerospace programs where RoHS exemption under Annex IV applies. Lead-free and halogen-free status not specified in the legacy MAX 5000 datasheet; contact Rochester Electronics for environmental compliance documentation.
