Renesas Electronics

ICS501AMT - 200MHz PLL Clock Generator | Renesas Electronics

Артикул: ICS501AMT ✓ Активен
3 V to 3.6 V Vdss 8-SOIC, 0.154 inch wide, 3.90 mm body width Package 200 MHz Speed
MOQ: 1 |

ICS501AMT Обзор

Renesas Electronics ICS501AMT is a single PLL-based clock generator that produces a CMOS clock output up to 200 MHz from a lower-frequency crystal or clock input. It operates from a 3 V to 3.6 V supply in an 8-SOIC surface-mount package and is supplied in tape-and-reel packaging. The device provides a 1:1 input-to-output ratio, supports either crystal or external-clock excitation, and uses a non-differential clock architecture.

A PLL clock generator is an integrated clock and timing circuit that locks an internal oscillator to an external reference before multiplying or conditioning that reference into a higher-frequency output. In the broader semiconductor hierarchy, the ICS501AMT belongs to the clock-generator family, within clock and timing ICs and the broader power-management and semiconductor ecosystem. Its purpose is to provide a stable, high-frequency timing reference without requiring a complete external crystal-oscillator assembly for every application.

The primary features of the ICS501AMT include a maximum output frequency of 200 MHz, one clock circuit, a 1:1 input-to-output ratio, CMOS output compatibility, and support for either a crystal or an external clock. These characteristics suit designs that need a higher-frequency clock derived from a lower-frequency source. The 3 V to 3.6 V operating range also places the device in a supply class commonly used by compact digital, communications, and embedded systems.

Technically, the ICS501AMT uses phase-locked-loop clock multiplication to establish a high-quality clock output from its reference input. The architecture is intended to replace conventional discrete crystal-oscillator arrangements in suitable electronic systems. Because the device accepts either a crystal or clock input, the design can support different reference-generation methods, although the crystal frequency, loop stability, jitter, output-waveform requirements, and load conditions must be evaluated before committing to a specific implementation.

Typical applications include digital logic clocking, communications-module timing, embedded processing, interface timing, instrumentation, and general-purpose frequency multiplication. In each case, the device acts as the clock source for circuitry requiring a CMOS-compatible reference. Its surface-mount SOIC package supports automated assembly, while the tape-and-reel configuration is intended for high-volume production and pick-and-place manufacturing.

The principal design consideration is preserving a clean reference and a controlled board environment. Route the crystal or clock input with short, symmetric traces, maintain the recommended support network, and keep sensitive timing paths away from noisy switching circuitry. Confirm output loading, rise-time limits, and downstream clock requirements against the manufacturer datasheet before layout release. The 200 MHz maximum rating is a device limit, not a guarantee that every crystal or board implementation will produce acceptable jitter at that frequency.

This product page consolidates the device architecture, operating limits, package information, sourcing guidance, and engineering trade-offs needed to evaluate the ICS501AMT. It also distinguishes verified drop-in replacements from generic clock-generator alternatives, helping designers assess PCB compatibility, supply voltage, output frequency, and timing requirements before selecting a replacement.

Аналоги без доработки для ICS501AMT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

ICS501AMT Характеристики

Device Type 1 PLL clock generator
Maximum Output Frequency 200 MHz
Supply Voltage Range 3 V to 3.6 V
PLL Yes
Input Type Crystal or clock input
Тип выхода CMOS
Number of Circuits 1 clock circuit
Input-to-Output Ratio 1:1
Differential Input No
Differential Output No
Корпус 8-SOIC, 0.154 inch wide, 3.90 mm body width
Тип монтажа Surface mount
Shipping Package Tape and reel

Руководство по цоколевке ICS501AMT в корпусе tape and reel

Цоколевка для ICS501AMT (корпус tape and reel). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса tape and reel для ICS501AMT

Нет подробных данных о распиновке для ICS501AMT.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ICS501AMT подходит для 6 применениеs: Digital Logic Clocking, Communications Module Timing, Embedded Processing Clock, Interface and Serializer Timing, Test and Measurement Instrumentation, Industrial Control System Timing.

🔧

Digital Logic Clocking

The ICS501AMT is appropriate for digital logic that needs a CMOS clock source capable of reaching 200 MHz from a lower-frequency crystal or reference clock. The device’s PLL architecture provides a practical way to obtain a high-frequency timing signal without implementing a complete discrete oscillator network. Place the reference network close to the input pins and route the output as a controlled transmission line when the clock reaches a high-speed domain. The engineer should confirm output jitter, edge rate, duty cycle, and fanout against the receiving logic before release.

🌐

Communications Module Timing

Communications modules often require a stable reference clock for serializers, transceivers, and digital control logic. The ICS501AMT supports crystal or clock excitation and provides a non-differential CMOS output, making it suitable for systems whose timing interface is single-ended. With a 3 V to 3.6 V operating range, it aligns with many compact communications subsystems. The critical design checks are reference accuracy, PLL jitter, output load, return loss at the operating frequency, and isolation from switching supplies and high-speed data paths.

🧩

Embedded Processing Clock

An embedded processor or programmable controller can use the ICS501AMT as a local clock source when the system requires a PLL-generated frequency above the available reference input. The 200 MHz maximum output and 1:1 input-to-output ratio make the part suitable for evaluating fixed-ratio clocking around a crystal reference. Because processor timing margins depend on edge quality and system noise, verify the target clock specification, permitted jitter, and I/O voltage before connecting the output. Keep the reference path and supply return tightly controlled.

🌐

Interface and Serializer Timing

The ICS501AMT can supply a single-ended CMOS clock to compatible serializers, parallel-to-serial converters, and interface controllers that need a locally generated timing reference. Its PLL-based organization allows a lower-frequency crystal or clock to serve as the basis for the output frequency. The layout must minimize reference-loop area and maintain controlled impedance for the high-speed output. Engineers should verify that the downstream interface accepts the generated edge rate and duty cycle and that its internal timing margin remains adequate.

🖥️

Test and Measurement Instrumentation

Instrumentation systems can use the ICS501AMT as a local reference-clock generator for acquisition, conversion, and control subsystems. A single clock output simplifies distribution when the instrument does not require multiple independent frequencies. The part’s 8-SOIC footprint supports compact surface-mount assemblies, while its 3 V to 3.6 V supply range suits 3.3 V systems. For precision measurement use, evaluate phase noise, jitter, deterministic spur levels, temperature behavior, and isolation from analog and switching sections before selecting the reference topology.

🏭

Industrial Control System Timing

Industrial controllers can use the ICS501AMT when a compact board requires a high-frequency CMOS clock derived from a crystal or external reference. The surface-mount 8-SOIC package and tape-and-reel configuration support automated production, and the 200 MHz ceiling covers many modern digital control tasks. Industrial designs must account for temperature range, supply tolerance, electromagnetic interference, and long-term reliability. Confirm those limits in the Renesas manufacturer datasheet and preserve separation between clock routing and noisy power-conversion stages.

What is the ICS501AMT?
The ICS501AMT is a single-channel PLL clock generator that produces a CMOS output up to 200 MHz from a lower-frequency crystal or clock input. According to the Renesas manufacturer datasheet, the device operates from 3 V to 3.6 V and provides a 1:1 input-to-output ratio. It is packaged in an 8-SOIC surface-mount package and is intended to replace conventional crystal-oscillator arrangements in suitable electronic systems.
What is the maximum output frequency of the ICS501AMT?
The ICS501AMT has a maximum output frequency of 200 MHz. The Renesas manufacturer datasheet identifies the ICS501A as a PLL clock generator capable of producing a high-frequency output from a lower-frequency crystal or clock source. Actual usable frequency, jitter, and duty-cycle performance also depend on the selected reference source, board layout, output loading, and the requirements of the receiving logic.
What supply voltage does the ICS501AMT require?
The ICS501AMT operates from 3 V to 3.6 V. According to the Renesas manufacturer datasheet, the device is intended for a 3.3 V-class supply environment. Its bypass and reference-network requirements should be implemented directly from the manufacturer’s recommended application circuit, while the supply must remain within the stated voltage range across temperature and load conditions.
What inputs and outputs does the ICS501AMT support?
The ICS501AMT accepts a crystal or external clock input and provides a non-differential CMOS clock output. According to the Renesas manufacturer datasheet, it contains one clock circuit and has a 1:1 input-to-output ratio. These characteristics distinguish it from a general-purpose buffer and make it suitable for designs in which a stable, higher-frequency CMOS clock must be derived from a suitable reference.
Where can I download the ICS501AMT datasheet PDF?
The official Renesas manufacturer datasheet is available at https://www.renesas.com/document/dst/501-datasheet. It is the primary document for electrical characteristics, pin assignments, crystal-support components, timing behavior, and recommended application circuits. Use the Renesas document for design sign-off because the ICS501AMT order code and package details should be checked against the revision associated with that document.
Where can I find the ICS501AMT pinout?
The ICS501AMT uses an 8-SOIC package, and its authoritative pin assignments are shown in the Renesas manufacturer datasheet under the pin-description and package information sections. Before assigning PCB tracks, verify every pin number against that document, including the power, ground, crystal or clock-input, and clock-output connections. Do not infer the pinout from another package variant of the ICS501 family.
What can replace the ICS501AMT?
A valid drop-in replacement must use the same 8-SOIC footprint, preserve pin-to-pin connections, accept the same 3 V to 3.6 V supply, and provide an equivalent CMOS clock function with compatible output frequency and timing behavior. The Renesas manufacturer datasheet describes the ICS501A family, but a package code or similar clock-generator category alone does not establish compatibility. Use the Request a Quote form on this page when sourcing an exact-MPN replacement or asking for engineering review of a candidate.
Is the ICS501AMT suitable for communications equipment?
The ICS501AMT is suitable for communications applications that require a single CMOS clock output generated from a crystal or clock reference. Its 200 MHz maximum output frequency, PLL architecture, and 3 V to 3.6 V operating range support high-speed digital timing designs. The final suitability depends on required frequency range, jitter, rise and fall times, duty cycle, channel margin, and clock topology, all of which must be checked against the Renesas manufacturer datasheet.
ICS501AMT versus a crystal oscillator: which is better?
The ICS501AMT is better when the design specifically benefits from a PLL-based clock generator with crystal or external-clock input and a CMOS output up to 200 MHz. A conventional crystal oscillator may be simpler when one fixed output frequency meets every timing requirement. The decision should compare supported frequencies, jitter, accuracy, startup behavior, load capacitance, output format, supply voltage, package, and total board area rather than treating the two approaches as automatically interchangeable.
When should I choose the ICS501AMT over a generic CMOS clock buffer?
Choose the ICS501AMT when the design needs the device to establish a PLL-based clock output from a crystal or reference clock rather than simply reproduce and buffer an existing waveform. A generic CMOS clock buffer is generally more appropriate when the incoming signal already has the required frequency, timing, and edge quality. For the ICS501AMT, verify that its PLL characteristics and reference requirements meet the system’s jitter, accuracy, startup, and output-loading specifications.
What is the difference between the ICS501AMT and ICS501AMI?
The ICS501AMT and ICS501AMI are identified as members of the ICS501A product family, but the verified material does not provide a complete parameter-by-parameter comparison of their temperature grading or order-code meanings. The ICS501AMT is specified as an 8-SOIC tape-and-reel device with a 3 V to 3.6 V supply and up to 200 MHz output. Before substituting one for the other, check the manufacturer ordering information and confirm package, pinout, temperature range, and tape-and-reel orientation.
How should the ICS501AMT be placed on a PCB?
Place the ICS501AMT close to the crystal or reference-clock source and keep the reference path short and symmetric. Follow the Renesas manufacturer datasheet for crystal load capacitance, grounding, bypass capacitors, and output routing. Keep high-current switching paths away from the clock pins, provide a continuous ground reference, and route the CMOS output to avoid stubs, excessive loading, and impedance discontinuities that could degrade edge quality.
How much power does the ICS501AMT dissipate?
Power dissipation depends on the 3 V to 3.6 V supply voltage, operating frequency, output loading, and the device’s operating current at the selected conditions. The verified product information establishes the supply range and maximum output frequency but does not provide the operating-current values needed for a defensible calculation. Use the manufacturer datasheet’s electrical characteristics and your actual load condition to evaluate heat dissipation in the 8-SOIC package.
Is the ICS501AMT in stock and what is its lead time?
The ICS501AMT is currently listed by multiple supply channels, but a dependable stock count and production lead time must be confirmed for the exact order code and shipment quantity. Use the Request a Quote form on this page to request current availability, lead time, and order handling. When requesting a quote, specify the required quantity, tape-and-reel packaging, destination, and target delivery date so the manufacturing and logistics response can be scoped correctly.
Where can I buy the ICS501AMT and check its current price?
Use the Request a Quote form on this page to request the current price, stock position, and lead time for the exact ICS501AMT order code. A meaningful quote should include the required quantity, shipment destination, and production schedule. Because pricing and availability can change with order size and market conditions, use the same quote request to confirm the tape-and-reel delivery configuration and any traceability or documentation requirements.
What are the key specifications of the ICS501AMT?
The ICS501AMT is a one-circuit PLL clock generator with a maximum output frequency of 200 MHz, a 3 V to 3.6 V supply range, crystal or clock input, and a non-differential CMOS output. The Renesas manufacturer datasheet also identifies a 1:1 input-to-output ratio and an 8-SOIC surface-mount package. Its tape-and-reel ordering configuration supports automated assembly, while jitter, duty cycle, thermal limits, and crystal load details remain application-specific parameters.
Is the ICS501AMT RoHS or REACH compliant?
The RoHS and REACH status of the ICS501AMT must be confirmed from the current Renesas product documentation or declaration associated with the exact ordering code. The device is listed in an 8-SOIC package and is intended for lead-free surface-mount assembly, but package construction alone does not prove regulatory compliance. For production release, archive the applicable manufacturer declaration and confirm any customer-specific substance-tracking requirements with the supplier.

Справочные инженерные данные для ICS501AMT — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ICS501AMT when the design requires a PLL-based, non-differential CMOS clock output up to 200 MHz from a crystal or external-clock reference in an 8-SOIC package. It is especially useful where integrating clock generation can reduce the component count associated with a separate oscillator and distribution arrangement. Do not select it solely from frequency or package similarity: confirm operating temperature, jitter, duty cycle, crystal load, output rise and fall times, startup behavior, and supply-current limits in the manufacturer datasheet. A fixed-frequency crystal oscillator may be simpler when one frequency and edge profile satisfy the entire system. A CMOS clock buffer may be preferable when the input clock already has the required frequency and quality. For a direct replacement, the candidate must preserve the 8-SOIC land pattern, pin assignments, 3 V to 3.6 V supply operation, CMOS interface, and required timing performance; otherwise, treat it as a redesign rather than a drop-in substitution.

Сравнение с аналогами

Параметр Этот товар
Brand Renesas Electronics
Package 8-SOIC, 0.154 inch wide, 3.90 mm body width
Device Type PLL clock generator
Maximum Output Frequency 200 MHz
Supply Voltage Range 3 V to 3.6 V
Input Type Crystal or clock input
Output Type Non-differential CMOS
Number of Clock Circuits 1
Input-to-Output Ratio 1:1
Shipping Package Tape and reel

Ключевые отличия

  • PLL-based clock generation in a compact 8-SOIC package (против Conventional discrete crystal-oscillator implementation)
  • Supports two reference styles (против Crystal-only oscillator implementation)
  • Single-clock integration reduces external timing circuitry (против Separate oscillator plus distribution-buffer implementation)

Заметки по проектированию

Keep the crystal or clock-input network and the ICS501AMT physically close together, and follow the Renesas manufacturer datasheet for crystal load capacitance and grounding. Use short, symmetric routes for the reference signal, provide a continuous ground plane, and keep the input away from switching nodes and high-current return paths. For the CMOS clock output, use a controlled-impedance route when required, avoid unnecessary stubs, and confirm downstream fanout and edge-rate limits.

Do not treat the 200 MHz maximum output rating as proof that every reference frequency will meet system timing requirements. The crystal choice, crystal load capacitance, PCB parasitics, supply noise, output loading, and reference jitter all influence real operation. Validate startup, frequency accuracy, output duty cycle, and downstream timing margin with the manufacturer’s recommended network before production release.

Decouple the 3 V to 3.6 V supply at the device using the capacitance and placement shown in the Renesas manufacturer datasheet. Keep the supply return path short and place bypass components close to the relevant power and ground pins. Avoid routing clock currents through noisy regulator outputs, and check the supply ripple at the device when the clock generator shares a board with switching converters, motor drivers, or high-current logic.

Order-code similarity does not establish drop-in compatibility. An alternative must match the 8-SOIC footprint and pin assignments, operate from the same 3 V to 3.6 V supply range, provide compatible CMOS output timing, and meet the required frequency, jitter, duty-cycle, and load conditions. Tape-and-reel packaging codes and family members with changed electrical functions should not be assumed to be interchangeable.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The exact regulatory declarations, temperature qualification, and lead-free construction details must be confirmed from the current Renesas documentation for the ICS501AMT order code.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ICS501AMT datasheet ICS501AMT pinout ICS501AMT datasheet pdf ICS501AMT specifications ICS501AMT equivalent ICS501AMT replacement ICS501AMT cross reference ICS501AMT price ICS501AMT stock Renesas ICS501AMT ICS501AMT 200MHz clock generator ICS501AMT 8-SOIC footprint ICS501AMT application circuit ICS501 clock generator schematic

Связанные компоненты & термины

Renesas Electronics ICS501AMT ICS501A ICS501AMI LOCO PLL clock generator clock generator IC phase-locked loop CMOS clock output crystal oscillator clock and timing IC 200 MHz 3 V to 3.6 V power supply 1:1 input-to-output ratio 8-SOIC SOIC package family surface mount SMD tape-and-reel packaging embedded processing communications module timing industrial control system test and measurement instrumentation reference clock
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ