ICS501AMT - 200MHz PLL Clock Generator | Renesas Electronics
MPN: ICS501AMT ✓ فعالICS501AMT جائزہ
A PLL clock generator is an integrated clock and timing circuit that locks an internal oscillator to an external reference before multiplying or conditioning that reference into a higher-frequency output. In the broader semiconductor hierarchy, the ICS501AMT belongs to the clock-generator family, within clock and timing ICs and the broader power-management and semiconductor ecosystem. Its purpose is to provide a stable, high-frequency timing reference without requiring a complete external crystal-oscillator assembly for every application.
The primary features of the ICS501AMT include a maximum output frequency of 200 MHz, one clock circuit, a 1:1 input-to-output ratio, CMOS output compatibility, and support for either a crystal or an external clock. These characteristics suit designs that need a higher-frequency clock derived from a lower-frequency source. The 3 V to 3.6 V operating range also places the device in a supply class commonly used by compact digital, communications, and embedded systems.
Technically, the ICS501AMT uses phase-locked-loop clock multiplication to establish a high-quality clock output from its reference input. The architecture is intended to replace conventional discrete crystal-oscillator arrangements in suitable electronic systems. Because the device accepts either a crystal or clock input, the design can support different reference-generation methods, although the crystal frequency, loop stability, jitter, output-waveform requirements, and load conditions must be evaluated before committing to a specific implementation.
Typical applications include digital logic clocking, communications-module timing, embedded processing, interface timing, instrumentation, and general-purpose frequency multiplication. In each case, the device acts as the clock source for circuitry requiring a CMOS-compatible reference. Its surface-mount SOIC package supports automated assembly, while the tape-and-reel configuration is intended for high-volume production and pick-and-place manufacturing.
The principal design consideration is preserving a clean reference and a controlled board environment. Route the crystal or clock input with short, symmetric traces, maintain the recommended support network, and keep sensitive timing paths away from noisy switching circuitry. Confirm output loading, rise-time limits, and downstream clock requirements against the manufacturer datasheet before layout release. The 200 MHz maximum rating is a device limit, not a guarantee that every crystal or board implementation will produce acceptable jitter at that frequency.
This product page consolidates the device architecture, operating limits, package information, sourcing guidance, and engineering trade-offs needed to evaluate the ICS501AMT. It also distinguishes verified drop-in replacements from generic clock-generator alternatives, helping designers assess PCB compatibility, supply voltage, output frequency, and timing requirements before selecting a replacement.
کے لیے ڈراپ اِن متبادل ICS501AMT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںICS501AMT تفصیلات
| Device Type | 1 PLL clock generator |
| Maximum Output Frequency | 200 MHz |
| Supply Voltage Range | 3 V to 3.6 V |
| PLL | Yes |
| Input Type | Crystal or clock input |
| آؤٹ پٹ کی قسم | CMOS |
| Number of Circuits | 1 clock circuit |
| Input-to-Output Ratio | 1:1 |
| Differential Input | No |
| Differential Output | No |
| پیکیج | 8-SOIC, 0.154 inch wide, 3.90 mm body width |
| ماؤنٹنگ ٹائپ | Surface mount |
| Shipping Package | Tape and reel |
ICS501AMT tape and reel پن کنفیگریشن گائیڈ
ICS501AMT (tape and reel پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ICS501AMT.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ICS501AMT کے لیے موزوں ہے 6 ایپلیکیشنs: Digital Logic Clocking, Communications Module Timing, Embedded Processing Clock, Interface and Serializer Timing, Test and Measurement Instrumentation, Industrial Control System Timing.
Digital Logic Clocking
The ICS501AMT is appropriate for digital logic that needs a CMOS clock source capable of reaching 200 MHz from a lower-frequency crystal or reference clock. The device’s PLL architecture provides a practical way to obtain a high-frequency timing signal without implementing a complete discrete oscillator network. Place the reference network close to the input pins and route the output as a controlled transmission line when the clock reaches a high-speed domain. The engineer should confirm output jitter, edge rate, duty cycle, and fanout against the receiving logic before release.
Communications Module Timing
Communications modules often require a stable reference clock for serializers, transceivers, and digital control logic. The ICS501AMT supports crystal or clock excitation and provides a non-differential CMOS output, making it suitable for systems whose timing interface is single-ended. With a 3 V to 3.6 V operating range, it aligns with many compact communications subsystems. The critical design checks are reference accuracy, PLL jitter, output load, return loss at the operating frequency, and isolation from switching supplies and high-speed data paths.
Embedded Processing Clock
An embedded processor or programmable controller can use the ICS501AMT as a local clock source when the system requires a PLL-generated frequency above the available reference input. The 200 MHz maximum output and 1:1 input-to-output ratio make the part suitable for evaluating fixed-ratio clocking around a crystal reference. Because processor timing margins depend on edge quality and system noise, verify the target clock specification, permitted jitter, and I/O voltage before connecting the output. Keep the reference path and supply return tightly controlled.
Interface and Serializer Timing
The ICS501AMT can supply a single-ended CMOS clock to compatible serializers, parallel-to-serial converters, and interface controllers that need a locally generated timing reference. Its PLL-based organization allows a lower-frequency crystal or clock to serve as the basis for the output frequency. The layout must minimize reference-loop area and maintain controlled impedance for the high-speed output. Engineers should verify that the downstream interface accepts the generated edge rate and duty cycle and that its internal timing margin remains adequate.
Test and Measurement Instrumentation
Instrumentation systems can use the ICS501AMT as a local reference-clock generator for acquisition, conversion, and control subsystems. A single clock output simplifies distribution when the instrument does not require multiple independent frequencies. The part’s 8-SOIC footprint supports compact surface-mount assemblies, while its 3 V to 3.6 V supply range suits 3.3 V systems. For precision measurement use, evaluate phase noise, jitter, deterministic spur levels, temperature behavior, and isolation from analog and switching sections before selecting the reference topology.
Industrial Control System Timing
Industrial controllers can use the ICS501AMT when a compact board requires a high-frequency CMOS clock derived from a crystal or external reference. The surface-mount 8-SOIC package and tape-and-reel configuration support automated production, and the 200 MHz ceiling covers many modern digital control tasks. Industrial designs must account for temperature range, supply tolerance, electromagnetic interference, and long-term reliability. Confirm those limits in the Renesas manufacturer datasheet and preserve separation between clock routing and noisy power-conversion stages.
کے لیے انجینئرنگ ریفرنس ڈیٹا ICS501AMT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Brand | Renesas Electronics |
| Package | 8-SOIC, 0.154 inch wide, 3.90 mm body width |
| Device Type | PLL clock generator |
| Maximum Output Frequency | 200 MHz |
| Supply Voltage Range | 3 V to 3.6 V |
| Input Type | Crystal or clock input |
| Output Type | Non-differential CMOS |
| Number of Clock Circuits | 1 |
| Input-to-Output Ratio | 1:1 |
| Shipping Package | Tape and reel |
اہم امتیازی خصوصیات
- PLL-based clock generation in a compact 8-SOIC package (بمقابلہConventional discrete crystal-oscillator implementation)
- Supports two reference styles (بمقابلہCrystal-only oscillator implementation)
- Single-clock integration reduces external timing circuitry (بمقابلہSeparate oscillator plus distribution-buffer implementation)
ڈیزائن نوٹس
Keep the crystal or clock-input network and the ICS501AMT physically close together, and follow the Renesas manufacturer datasheet for crystal load capacitance and grounding. Use short, symmetric routes for the reference signal, provide a continuous ground plane, and keep the input away from switching nodes and high-current return paths. For the CMOS clock output, use a controlled-impedance route when required, avoid unnecessary stubs, and confirm downstream fanout and edge-rate limits.
Do not treat the 200 MHz maximum output rating as proof that every reference frequency will meet system timing requirements. The crystal choice, crystal load capacitance, PCB parasitics, supply noise, output loading, and reference jitter all influence real operation. Validate startup, frequency accuracy, output duty cycle, and downstream timing margin with the manufacturer’s recommended network before production release.
Decouple the 3 V to 3.6 V supply at the device using the capacitance and placement shown in the Renesas manufacturer datasheet. Keep the supply return path short and place bypass components close to the relevant power and ground pins. Avoid routing clock currents through noisy regulator outputs, and check the supply ripple at the device when the clock generator shares a board with switching converters, motor drivers, or high-current logic.
Order-code similarity does not establish drop-in compatibility. An alternative must match the 8-SOIC footprint and pin assignments, operate from the same 3 V to 3.6 V supply range, provide compatible CMOS output timing, and meet the required frequency, jitter, duty-cycle, and load conditions. Tape-and-reel packaging codes and family members with changed electrical functions should not be assumed to be interchangeable.
تعمیل کی معلومات
The exact regulatory declarations, temperature qualification, and lead-free construction details must be confirmed from the current Renesas documentation for the ICS501AMT order code.