INA253A1IPW - 80V Bidirectional Current Sense Amp | TI
Артикул: INA253A1IPW ✓ АктивенINA253A1IPW Обзор
A current-sense amplifier is a specialized amplifier that measures the voltage across a current sensor and produces an output proportional to the sensed current. The INA253 belongs to the instrumentation-amplifier and current-sensing IC hierarchy, where its integrated shunt combines current measurement with low-inductance sensing. This integration simplifies the power path and supports bidirectional measurement, allowing positive and negative current to be represented around a common zero-current output level.
Key features include an 80 V common-mode input range, bidirectional current sensing, PWM rejection, zero-drift operation, and an integrated 2 mΩ shunt resistor. The A1 gain option provides a 50 V/V output ratio. The 20-pin TSSOP package provides a compact surface-mount format for industrial, automotive-adjacent, communications, and power-supply control systems where measured current must withstand substantial switching-node transients.
The integrated shunt is the defining technical feature. A low-inductance sensing element limits the voltage spikes that would otherwise appear when current changes rapidly. The PWM-rejection architecture reduces disturbance from switching waveforms, while the zero-drift input stage improves accuracy around zero current. Compared with a discrete shunt-and-amplifier implementation, the INA253 reduces board area and component count while retaining the gain and common-mode ratings needed for demanding power-conversion circuits.
Typical uses include DC-DC converter output-current monitoring, bidirectional motor-control current measurement, battery and power-path monitoring, and protection in industrial equipment. The 80 V common-mode capability is especially useful when the sensed conductor sits near a switching node. The integrated shunt also makes the device suitable for compact instrumentation where external Kelvin routing and discrete shunt placement would increase complexity.
For PCB design, keep the high-current path electrically short and place the amplifier and its decoupling capacitors close to the supply pins. Review the manufacturer datasheet's layout example for the recommended shunt and grounding arrangement. Confirm that the analog output remains within the input range of the receiving ADC, and account for amplifier output swing and system offset when defining trip thresholds.
This page combines the manufacturer's key INA253A1IPW specifications with same-package family alternatives, package details, application guidance, and selection considerations. It is intended to help engineers identify the correct gain and automotive options without overlooking common-mode rating, shunt integration, temperature range, or PCB-layout requirements.
Аналоги без доработки для INA253A1IPW — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с INA253A1IPW (тот же форм-фактор и посадочное место) — отличается по Gain, Operating Temperature Range, Common-Mode Voltage Range, Output Type, Package.
INA253A2IPW
✅ Прямая заменаУточнить цену
Открыть даташит →INA253A3IPW
✅ Прямая заменаУточнить цену
Открыть даташит →INA253A3QPWRQ1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
INA253A1IPW Максимальные параметры и электрические характеристики
| Product Type | Bidirectional precision current-sense amplifier |
| Common-Mode Voltage Range | -4 V to 80 V |
| Maximum Common-Mode Voltage | 80 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Integrated Shunt Resistance | 2 mΩ |
| Gain | 50 V/V |
| Current Direction | Bidirectional |
| Offset Drift | Zero-drift |
| PWM Rejection | Internal PWM-rejection filter |
| Тип выхода | Analog voltage output |
| Диапазон рабочих температур | -40°C to 125°C |
| Корпус | 20-pin TSSOP (PW) |
| Package Width | 4.40 mm |
| Тип монтажа | Surface mount |
| Number of Amplifier Circuits | 1 circuit |
Руководство по цоколевке INA253A1IPW в корпусе 4.40 mm
Цоколевка для INA253A1IPW (корпус 4.40 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для INA253A1IPW.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
INA253A1IPW подходит для 6 применениеs: DC-DC Converter Output Monitoring, Bidirectional Motor Control, Battery Pack Current Protection, Industrial Power-Supply Feedback, Motor Drive Bidirectional Control, Telecom Power Distribution Monitoring.
DC-DC Converter Output Monitoring
The INA253A1IPW is suitable for output-current feedback in isolated and non-isolated DC-DC converters because it combines an 80 V common-mode range with PWM rejection and an integrated 2 mΩ shunt. The device directly measures current in the power path and produces a proportional analog voltage for the controller or an external ADC. Its 50 V/V gain gives useful resolution without requiring the larger output swing associated with the 100 V/V A2 option. Because the shunt is integrated, the designer can shorten the high-current route and avoid a separate Kelvin connection to a discrete shunt. Thermal checks should include worst-case output current, and the analog output must remain below the selected converter's feedback or ADC input range.
Рекомендуется
Bidirectional Motor Control
The INA253A1IPW can measure forward and regenerative motor current because it supports bidirectional sensing around zero current. Its 80 V common-mode rating accommodates power-stage voltages encountered in industrial motor controllers, while the integrated low-inductance shunt helps preserve measurement accuracy during rapid current transitions. The 50 V/V output scaling is useful when feeding a motor-controller ADC with an input range that does not require the greater sensitivity of the A2 or A3 options. Designers should verify the controller's ground reference, common-mode limits, and ADC input range. Kelvin sensing, exposed-pad treatment, and shunt-path layout must follow the manufacturer guidance rather than relying on a generic current-sense layout.
Рекомендуется
Battery Pack Current Protection
The INA253A1IPW is applicable to battery charge, discharge, and regenerative-current monitoring where the current direction can change. Its integrated 2 mΩ shunt provides a defined sensing element without requiring a separate low-inductance resistor, while the -4 V to 80 V common-mode range covers many protected battery-system transients. Zero-drift operation improves resolution near the zero-current transition, and PWM rejection helps reject switching ripple from adjacent converters. The measured output can drive a protection controller or ADC for overcurrent and state-of-charge functions. Engineering checks should include the exact battery voltage range, worst-case shunt dissipation, transient behavior, and whether the output remains valid during hard charging or regenerative events.
Рекомендуется
Industrial Power-Supply Feedback
The INA253A1IPW fits industrial power-supply designs that require accurate load-current reporting alongside an 80 V common-mode input capability. The integrated shunt reduces the number of high-current PCB components, and the 50 V/V gain provides a practical scaling ratio for a controller or monitoring ADC. PWM rejection is particularly useful when the measured conductor is affected by nearby switching converters. For accurate system measurement, route the analog output away from switching nodes, maintain a quiet ground reference, and follow the manufacturer layout guidance. The power-path copper must also accommodate the current without excessive temperature rise, because the integrated shunt's dissipation is proportional to current squared.
Рекомендуется
Motor Drive Bidirectional Control
The INA253A1IPW supports closed-loop current control in motor-drive systems by measuring positive torque-producing current and negative regenerative current with one device. Its 80 V common-mode range is suitable for many low- and medium-voltage motor buses, while PWM rejection and the integrated low-inductance shunt improve the usefulness of the measurement in a switching environment. The 50 V/V gain option offers a balance between ADC resolution and available output headroom. Firmware and analog thresholds must be recalibrated when comparing it with the A2 or A3 gain options. Layout should prioritize short high-current connections, clean analog return paths, and adequate thermal performance at the highest continuous motor current.
Рекомендуется
Telecom Power Distribution Monitoring
The INA253A1IPW can monitor current in telecom and communications power-distribution modules where the measured rail may have a high common-mode voltage and the control electronics operate from 3.3 V or 5 V. Bidirectional measurement is useful for redundant, battery-backed, or actively regulated power paths in which current can reverse. The integrated 2 mΩ shunt and PWM rejection reduce external sensing complexity, and the 20-pin TSSOP supports compact controller boards. Confirm the maximum bus voltage including transients, the allowable current direction, and the system-specific ground-reference arrangement. The current output can feed an ADC such as the ADS8519IDB or a precision converter such as the ADS1262IPW when remote telemetry or fault detection is required.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для INA253A1IPW — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | INA253A2IPW | INA253A3IPW | INA253A3QPWRQ1 |
|---|---|---|---|---|
| Package | 20-pin TSSOP (PW) | 20-pin TSSOP (PW) - same | 20-pin TSSOP (PW) - same | 20-pin TSSOP (PW) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Gain | 50 V/V | 100 V/V | 200 V/V | 200 V/V |
| Maximum Common-Mode Voltage | 80 V | 80 V | 80 V | 80 V |
| Minimum Common-Mode Voltage | -4 V | -4 V | -4 V | -4 V |
| Integrated Shunt Resistance | 2 mΩ | 2 mΩ | 2 mΩ | 2 mΩ |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Operating Temperature Range | -40°C to 125°C | -40°C to 125°C | -40°C to 125°C | -40°C to 125°C |
| Bidirectional Sensing | Yes | Yes | Yes | Yes |
| PWM Rejection | Yes | Yes | Yes | Yes |
| Automotive Qualification | Not indicated by the INA253A1IPW ordering code | Not indicated by ordering code | Not indicated by ordering code | Automotive-qualified Q1 option |
Ключевые отличия
- Lower gain preserves analog output headroom (против INA253A2IPW)
- Greater sensitivity is available without changing the footprint (против INA253A3IPW)
- Standard-temperature gain option avoids unnecessary qualification changes (против INA253A3QPWRQ1)
Заметки по проектированию
Route the high-current conductor through the integrated shunt with minimal loop area and avoid adding unnecessary resistance or inductance in the power path. Place the amplifier supply bypass capacitor close to its supply and ground pins, and keep the analog output trace away from switching nodes. Use the manufacturer layout example to preserve the intended current-sensing geometry and prevent auxiliary copper from creating unintended parallel current paths.
Estimated: the integrated 2 mΩ shunt dissipates P = I²R. At a continuous 10 A, the calculated shunt loss is 0.2 W using I = 10 A and R = 2 mΩ; at 20 A, it is 0.8 W using I = 20 A and R = 2 mΩ. Verify junction and board temperature under the worst-case ambient, copper area, and neighboring heat sources. These calculations are engineering estimates rather than guaranteed manufacturer performance figures.
Keep the analog output path short and provide a quiet return for the amplifier. Filter only as required by the control-loop bandwidth, because excessive filtering can slow fault detection and distort transient-current information. Check that the output remains inside the ADC or controller input range at maximum expected current, including offset, gain error, and bidirectional excursions. Calibrate the system at operating temperature when near-zero-current accuracy is important.
Do not treat the 80 V common-mode rating as permission to exceed the device's supply or absolute-maximum ratings. Also do not select the A2 or A3 gain option as an automatic replacement for the A1: their output voltage is respectively twice and four times higher for the same current. Verify the pin configuration from the manufacturer datasheet, observe the specified decoupling, and confirm the exact A1 ordering option before PCB release.
Информация о соответствии
The INA253A1IPW ordering code does not include the Q1 automotive designation. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Texas Instruments for the exact orderable part.