Texas Instruments

INA253A1IPW - 80V Bidirectional Current Sense Amp | TI

MPN: INA253A1IPW ✓ Active
-4 V to 80 V Vdss Bidirectional Id 2 mΩ Rds(on) 20-pin TSSOP (PW) Package
MOQ: 1 |

INA253A1IPW Overview

The Texas Instruments INA253A1IPW is an 80 V bidirectional precision current-sense amplifier with PWM rejection and an integrated 2 mΩ precision, low-inductance shunt resistor, packaged in a 20-pin TSSOP. The device accepts a supply voltage of 2.7 V to 5.5 V and operates across a -40°C to 125°C temperature range. It converts the voltage developed across the integrated shunt into an amplified analog output that can be measured by an ADC, controller, or protection circuit.

A current-sense amplifier is a specialized amplifier that measures the voltage across a current sensor and produces an output proportional to the sensed current. The INA253 belongs to the instrumentation-amplifier and current-sensing IC hierarchy, where its integrated shunt combines current measurement with low-inductance sensing. This integration simplifies the power path and supports bidirectional measurement, allowing positive and negative current to be represented around a common zero-current output level.

Key features include an 80 V common-mode input range, bidirectional current sensing, PWM rejection, zero-drift operation, and an integrated 2 mΩ shunt resistor. The A1 gain option provides a 50 V/V output ratio. The 20-pin TSSOP package provides a compact surface-mount format for industrial, automotive-adjacent, communications, and power-supply control systems where measured current must withstand substantial switching-node transients.

The integrated shunt is the defining technical feature. A low-inductance sensing element limits the voltage spikes that would otherwise appear when current changes rapidly. The PWM-rejection architecture reduces disturbance from switching waveforms, while the zero-drift input stage improves accuracy around zero current. Compared with a discrete shunt-and-amplifier implementation, the INA253 reduces board area and component count while retaining the gain and common-mode ratings needed for demanding power-conversion circuits.

Typical uses include DC-DC converter output-current monitoring, bidirectional motor-control current measurement, battery and power-path monitoring, and protection in industrial equipment. The 80 V common-mode capability is especially useful when the sensed conductor sits near a switching node. The integrated shunt also makes the device suitable for compact instrumentation where external Kelvin routing and discrete shunt placement would increase complexity.

For PCB design, keep the high-current path electrically short and place the amplifier and its decoupling capacitors close to the supply pins. Review the manufacturer datasheet's layout example for the recommended shunt and grounding arrangement. Confirm that the analog output remains within the input range of the receiving ADC, and account for amplifier output swing and system offset when defining trip thresholds.

This page combines the manufacturer's key INA253A1IPW specifications with same-package family alternatives, package details, application guidance, and selection considerations. It is intended to help engineers identify the correct gain and automotive options without overlooking common-mode rating, shunt integration, temperature range, or PCB-layout requirements.

Drop-in alternatives for INA253A1IPW — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with INA253A1IPW (same form factor and footprint) — differing in Gain, Operating Temperature Range, Common-Mode Voltage Range, Output Type, Package.

Texas Instruments
Gain: 200 mV/V
Operating Temperature Range: -40 °C to +125 °C
Common-Mode Voltage Range: -4 V to +80 V
Compare with INA253A1IPW →
Texas Instruments
Gain: 400 mV/A
Operating Temperature Range: -40°C to +125°C
Common-Mode Voltage Range: -4 V to +80 V
Compare with INA253A1IPW →

INA253A2IPW

✅ Drop-In
Texas Instruments
📦 20-pin TSSOP (PW)
Bidirectional zero-drift current-shunt monitor · 2 mΩ · 200 mV/V · 2.7 V to 5.5 V · -4 V to +80 V · 350 kHz at -3 dB · 2.4 V/µs · 1.8 mA

Contact for price

View Datasheet →

INA253A3IPW

✅ Drop-In
Texas Instruments
📦 20-pin TSSOP (PW)
Bidirectional zero-drift current-shunt monitor with integrated shunt resistor · 1 circuit · 400 mV/A · -4 V to +80 V · 2 mΩ · Precision, low-inductive integrated resistor · Bidirectional

Contact for price

View Datasheet →

INA253A3QPWRQ1

✅ Drop-In
📦 20-pin TSSOP (PW)
Gain is 200 V/V instead of 50 V/V, a 300% increase in output scaling, while adding automotive qualification

📋 Reference alternative (not in catalog)

INA253A1IPW Maximum Ratings & Electrical Characteristics

Product Type Bidirectional precision current-sense amplifier
Common-Mode Voltage Range -4 V to 80 V
Maximum Common-Mode Voltage 80 V
Supply Voltage Range 2.7 V to 5.5 V
Integrated Shunt Resistance 2 mΩ
Gain 50 V/V
Current Direction Bidirectional
Offset Drift Zero-drift
PWM Rejection Internal PWM-rejection filter
Output Type Analog voltage output
Operating Temperature Range -40°C to 125°C
Package 20-pin TSSOP (PW)
Package Width 4.40 mm
Mounting Type Surface mount
Number of Amplifier Circuits 1 circuit

INA253A1IPW 4.40 mm Pin Configuration Guide

Pin configuration for INA253A1IPW (4.40 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

4.40 mm package pinout diagram for INA253A1IPW

No detailed pinout data available for INA253A1IPW.

Refer to the datasheet for full pin configuration.

Typical Applications

INA253A1IPW is suitable for 6 applications: DC-DC Converter Output Monitoring, Bidirectional Motor Control, Battery Pack Current Protection, Industrial Power-Supply Feedback, Motor Drive Bidirectional Control, Telecom Power Distribution Monitoring.

⚡

DC-DC Converter Output Monitoring

The INA253A1IPW is suitable for output-current feedback in isolated and non-isolated DC-DC converters because it combines an 80 V common-mode range with PWM rejection and an integrated 2 mΩ shunt. The device directly measures current in the power path and produces a proportional analog voltage for the controller or an external ADC. Its 50 V/V gain gives useful resolution without requiring the larger output swing associated with the 100 V/V A2 option. Because the shunt is integrated, the designer can shorten the high-current route and avoid a separate Kelvin connection to a discrete shunt. Thermal checks should include worst-case output current, and the analog output must remain below the selected converter's feedback or ADC input range.

🏭

Bidirectional Motor Control

The INA253A1IPW can measure forward and regenerative motor current because it supports bidirectional sensing around zero current. Its 80 V common-mode rating accommodates power-stage voltages encountered in industrial motor controllers, while the integrated low-inductance shunt helps preserve measurement accuracy during rapid current transitions. The 50 V/V output scaling is useful when feeding a motor-controller ADC with an input range that does not require the greater sensitivity of the A2 or A3 options. Designers should verify the controller's ground reference, common-mode limits, and ADC input range. Kelvin sensing, exposed-pad treatment, and shunt-path layout must follow the manufacturer guidance rather than relying on a generic current-sense layout.

🔋

Battery Pack Current Protection

The INA253A1IPW is applicable to battery charge, discharge, and regenerative-current monitoring where the current direction can change. Its integrated 2 mΩ shunt provides a defined sensing element without requiring a separate low-inductance resistor, while the -4 V to 80 V common-mode range covers many protected battery-system transients. Zero-drift operation improves resolution near the zero-current transition, and PWM rejection helps reject switching ripple from adjacent converters. The measured output can drive a protection controller or ADC for overcurrent and state-of-charge functions. Engineering checks should include the exact battery voltage range, worst-case shunt dissipation, transient behavior, and whether the output remains valid during hard charging or regenerative events.

🏭

Industrial Power-Supply Feedback

The INA253A1IPW fits industrial power-supply designs that require accurate load-current reporting alongside an 80 V common-mode input capability. The integrated shunt reduces the number of high-current PCB components, and the 50 V/V gain provides a practical scaling ratio for a controller or monitoring ADC. PWM rejection is particularly useful when the measured conductor is affected by nearby switching converters. For accurate system measurement, route the analog output away from switching nodes, maintain a quiet ground reference, and follow the manufacturer layout guidance. The power-path copper must also accommodate the current without excessive temperature rise, because the integrated shunt's dissipation is proportional to current squared.

🤖

Motor Drive Bidirectional Control

The INA253A1IPW supports closed-loop current control in motor-drive systems by measuring positive torque-producing current and negative regenerative current with one device. Its 80 V common-mode range is suitable for many low- and medium-voltage motor buses, while PWM rejection and the integrated low-inductance shunt improve the usefulness of the measurement in a switching environment. The 50 V/V gain option offers a balance between ADC resolution and available output headroom. Firmware and analog thresholds must be recalibrated when comparing it with the A2 or A3 gain options. Layout should prioritize short high-current connections, clean analog return paths, and adequate thermal performance at the highest continuous motor current.

🌐

Telecom Power Distribution Monitoring

The INA253A1IPW can monitor current in telecom and communications power-distribution modules where the measured rail may have a high common-mode voltage and the control electronics operate from 3.3 V or 5 V. Bidirectional measurement is useful for redundant, battery-backed, or actively regulated power paths in which current can reverse. The integrated 2 mΩ shunt and PWM rejection reduce external sensing complexity, and the 20-pin TSSOP supports compact controller boards. Confirm the maximum bus voltage including transients, the allowable current direction, and the system-specific ground-reference arrangement. The current output can feed an ADC such as the ADS8519IDB or a precision converter such as the ADS1262IPW when remote telemetry or fault detection is required.

What is the operating voltage of INA253A1IPW?
The INA253A1IPW operates from a 2.7 V to 5.5 V supply. According to the Texas Instruments manufacturer datasheet, the low-voltage supply range allows the device to interface directly with 3.3 V and 5 V control systems, while the integrated shunt and analog output simplify current measurement. Its 80 V common-mode rating is independent of the low-voltage amplifier supply, so the measured power conductor can sit at a substantially higher voltage.
What are the key specifications of INA253A1IPW that engineers should know?
The INA253A1IPW is a bidirectional current-sense amplifier with an 80 V common-mode range, a 2 mΩ integrated shunt, a 50 V/V gain option, PWM rejection, and a 2.7 V to 5.5 V supply range. It is specified for -40°C to 125°C operation and comes in a 20-pin TSSOP package. These characteristics make it suitable for high-voltage switched-current paths where a compact, low-inductance sensing element is required.
Where can I download the INA253A1IPW datasheet PDF?
The official INA253A1IPW datasheet is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ina253.pdf. The manufacturer product page for the INA253 family is also available at https://www.ti.com/product/INA253. Use the datasheet's ordering, pin-configuration, electrical-characteristics, and application sections to confirm the A1 gain option, 20-pin PW package, decoupling requirements, and layout recommendations before releasing a PCB design.
Where is the INA253A1IPW pinout located?
The INA253A1IPW pin configuration is shown in the pin-configuration section of the Texas Instruments manufacturer datasheet at https://www.ti.com/lit/ds/symlink/ina253.pdf. The device uses the 20-pin PW TSSOP package. Use the diagram to assign supply, ground, reference, output, and shunt-related connections because this integrated-shunt architecture differs from a conventional discrete current-sense amplifier.
Can INA253A1IPW measure negative current?
Yes, the INA253A1IPW supports bidirectional current measurement. Its zero-drift architecture measures current in either direction around the zero-current output point, making it suitable for battery charging, regenerative power paths, and motor-control systems where current can reverse. According to the Texas Instruments manufacturer datasheet, the device combines this bidirectional capability with an 80 V common-mode range and integrated 2 mΩ shunt.
Why does the INA253A1IPW include an integrated shunt resistor?
The integrated 2 mΩ shunt gives the INA253A1IPW a defined, low-inductance current-sensing element in the same package as the amplifier. This can reduce the component count and board area required by a discrete shunt and instrumentation-amplifier arrangement. The low inductance also limits unwanted voltage spikes during rapidly changing currents, while the 50 V/V gain converts the shunt voltage into a measurable analog output.
What is the best drop-in replacement for INA253A1IPW?
The INA253A1IPWR is the closest mechanically identical Texas Instruments option, but it differs only in reel packing and therefore does not add meaningful engineering differentiation. A same-pinout functional alternative is the INA253A2IPW, although its 100 V/V gain is twice the A1 gain and requires output-range recalculation. Only three distinct same-package alternatives were identified, so no less-compatible cross-package or unrelated amplifier has been presented as a drop-in replacement.
Can INA253A2IPW replace INA253A1IPW?
The INA253A2IPW uses the same 20-pin TSSOP package and provides the same 80 V bidirectional current-sense function, but its gain is 100 V/V rather than the A1 option's 50 V/V. It can replace the A1 electrically only when twice the output scaling is acceptable, the analog output does not saturate, and downstream gain or alarm thresholds are recalibrated. It is a pin-compatible but not functionally identical substitution.
When should I choose INA253A1IPW over INA253A2IPW?
Choose the INA253A1IPW when a 50 V/V output range provides sufficient ADC resolution or analog headroom without excessive gain. Choose the INA253A2IPW when more sensitivity is needed because its 100 V/V gain doubles the output response to the same shunt current. Both devices support bidirectional measurement, an 80 V common-mode range, PWM rejection, and operation in a 20-pin TSSOP package.
Is INA253A1IPW suitable for motor-control and power-converter applications?
Yes, the INA253A1IPW is well suited to motor-control and power-converter current feedback because it combines an 80 V common-mode rating with PWM rejection and zero-drift operation. The integrated 2 mΩ shunt avoids the external shunt-routing complexity of many discrete solutions. Designers should still verify the peak output voltage, shunt dissipation, thermal performance, and PCB layout against their particular switching waveform.
What can replace INA253A1IPW?
A compatible replacement must use the 20-pin PW TSSOP footprint and preserve the bidirectional current-sense function. The INA253A2IPW and INA253A3IPW provide higher-gain alternatives in the same family, while INA253A3QPWRQ1 adds an automotive-qualified option. Replacement is not automatic because gain, qualification, and output scaling can differ; the ADC range and protection thresholds must be checked before substitution.
Is INA253A1IPW the same as INA253A3QPWRQ1?
No, although both use the INA253 current-sense-amplifier family and a 20-pin TSSOP footprint. The INA253A1IPW is the 50 V/V option, while INA253A3QPWRQ1 is a higher-gain automotive-qualified family option. The A1 and A3 output scaling differ, and the Q1 designation identifies automotive qualification. Confirm output range, qualification requirements, and functional behavior in the manufacturer documentation before interchange.
What is the best Texas Instruments equivalent for INA253A1IPW?
For an exact gain-and-function replacement within the identified alternatives, the INA253A1IPWR is the closest Texas Instruments ordering option because it preserves the A1 gain and PW package, differing only in packing format. The INA253A2IPW and INA253A3IPW are same-package alternatives with higher gains. No verified cross-manufacturer 20-pin TSSOP drop-in equivalent was identified, so a generic current-sense amplifier should not be assumed to fit without pinout and parameter validation.
Where can I buy INA253A1IPW and check current availability?
Use the Request a Quote form on this page to request the current INA253A1IPW price, stock status, lead time, and order quantity. The request gives the purchasing team the exact MPN and package code needed to confirm an authorized supply channel. Quote confirmation is preferable to relying on an inventory snapshot because component availability and production allocation can change quickly.
What is the price of INA253A1IPW?
The current INA253A1IPW price is obtained through the Request a Quote form on this page. The submitted request should identify the exact MPN, quantity, and desired packaging. Because distributor inventory and volume allocation can change, a quote provides the current commercial terms rather than a stale historical price. No fixed price should be inferred from the product page.
What is the lead time and stock status of INA253A1IPW?
Current stock and lead time for the INA253A1IPW should be confirmed through the Request a Quote form on this page. Include the required quantity, date code preference, and whether the 20-pin PW TSSOP package is acceptable for the assembly process. The purchasing response is the appropriate source for present allocation and delivery timing, since component availability can change after a catalog or search snapshot.

Engineering reference data for INA253A1IPW — comparison, design guidance, and compliance information.

Selection Guide

Choose the INA253A1IPW when you need bidirectional current sensing, an 80 V common-mode range, PWM rejection, and an integrated 2 mΩ shunt in a 20-pin TSSOP package. Its 50 V/V gain is the most conservative of the identified alternatives for preserving analog output headroom. Select the INA253A2IPW when twice the sensitivity is needed and the ADC input range can accommodate the larger signal. Select the INA253A3IPW when maximum gain is required, provided the output swing and precision at low current remain acceptable. Choose the INA253A3QPWRQ1 when the design requires automotive qualification and can accommodate its 200 V/V scaling. No cross-manufacturer drop-in alternative was identified with sufficient package and pinout confirmation, so a generic amplifier should not be treated as an interchangeable replacement without complete engineering validation.

Comparison with Alternatives

Parameter This Product INA253A2IPW INA253A3IPW INA253A3QPWRQ1
Package 20-pin TSSOP (PW) 20-pin TSSOP (PW) - same 20-pin TSSOP (PW) - same 20-pin TSSOP (PW) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Gain 50 V/V 100 V/V 200 V/V 200 V/V
Maximum Common-Mode Voltage 80 V 80 V 80 V 80 V
Minimum Common-Mode Voltage -4 V -4 V -4 V -4 V
Integrated Shunt Resistance 2 mΩ 2 mΩ 2 mΩ 2 mΩ
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Operating Temperature Range -40°C to 125°C -40°C to 125°C -40°C to 125°C -40°C to 125°C
Bidirectional Sensing Yes Yes Yes Yes
PWM Rejection Yes Yes Yes Yes
Automotive Qualification Not indicated by the INA253A1IPW ordering code Not indicated by ordering code Not indicated by ordering code Automotive-qualified Q1 option

Key Differentiators

  • Lower gain preserves analog output headroom (vs INA253A2IPW)
  • Greater sensitivity is available without changing the footprint (vs INA253A3IPW)
  • Standard-temperature gain option avoids unnecessary qualification changes (vs INA253A3QPWRQ1)

Design Notes

Route the high-current conductor through the integrated shunt with minimal loop area and avoid adding unnecessary resistance or inductance in the power path. Place the amplifier supply bypass capacitor close to its supply and ground pins, and keep the analog output trace away from switching nodes. Use the manufacturer layout example to preserve the intended current-sensing geometry and prevent auxiliary copper from creating unintended parallel current paths.

Estimated: the integrated 2 mΩ shunt dissipates P = I²R. At a continuous 10 A, the calculated shunt loss is 0.2 W using I = 10 A and R = 2 mΩ; at 20 A, it is 0.8 W using I = 20 A and R = 2 mΩ. Verify junction and board temperature under the worst-case ambient, copper area, and neighboring heat sources. These calculations are engineering estimates rather than guaranteed manufacturer performance figures.

Keep the analog output path short and provide a quiet return for the amplifier. Filter only as required by the control-loop bandwidth, because excessive filtering can slow fault detection and distort transient-current information. Check that the output remains inside the ADC or controller input range at maximum expected current, including offset, gain error, and bidirectional excursions. Calibrate the system at operating temperature when near-zero-current accuracy is important.

Do not treat the 80 V common-mode rating as permission to exceed the device's supply or absolute-maximum ratings. Also do not select the A2 or A3 gain option as an automatic replacement for the A1: their output voltage is respectively twice and four times higher for the same current. Verify the pin configuration from the manufacturer datasheet, observe the specified decoupling, and confirm the exact A1 ordering option before PCB release.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The INA253A1IPW ordering code does not include the Q1 automotive designation. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Texas Instruments for the exact orderable part.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

INA253A1IPW datasheet INA253A1IPW datasheet pdf INA253A1IPW pinout INA253A1IPW equivalent INA253A1IPW replacement INA253A1IPW cross reference INA253A1IPW vs INA253A2IPW INA253A1IPW footprint INA253A1IPW price INA253A1IPW stock Texas Instruments INA253A1IPW INA253 80V bidirectional current sense INA253A1IPW motor current monitoring INA253A1IPW PWM rejection INA253A1IPW application circuit

Related Components & Terms

Texas Instruments INA253A1IPW INA253A2IPW INA253A3IPW INA253A3QPWRQ1 INA240A4DR ADS8519IDB ADS1262IPW current-sense amplifier bidirectional current sensing precision current measurement integrated shunt resistor low-inductance shunt common-mode voltage power-supply rejection ratio PWM rejection zero-drift amplifier 20-pin TSSOP PW package surface-mount package semiconductor DC-DC converter motor control battery management
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details