ISL8200MIRZ - 10A Current-Share DC/DC Power Module | Renesas
Артикул: ISL8200MIRZ ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $15.38 | $15,38 |
| 10 | $13.85 | $138,50 |
| 100 | $12.1 | $1.210,00 |
| 500 | $10.55 | $5.275,00 |
| 1.000 | $9.4 | $9.400,00 |
ISL8200MIRZ Обзор
**Background - What is a DC/DC Power Module?** A DC/DC power module is a complete switch-mode power supply (SMPS) miniaturized into a single IC-style package. Unlike a discrete buck converter, which requires the engineer to select and lay out external MOSFETs, an inductor, and compensation components, a power module embeds all these building blocks inside the device, leaving only input/output bulk capacitors and a feedback resistor divider external. Power modules belong to the broader category of point-of-load (PoL) converters, which sit on the PCB next to the load they power (FPGA core rail, ASIC, SoC). Within the SMPS family tree, a power module sits below the buck converter hierarchy: buck converter -> step-down regulator -> PoL converter -> power module -> integrated power management IC.
**Key features** of the ISL8200MIRZ include 10A continuous output current, current-share pin for parallel operation up to 60A (six modules), internal 4.5V/20V MOSFETs, internal inductor, internal feedback compensation, adjustable soft-start, power-good indicator, and over-current/over-voltage/thermal protection. The high level of integration eliminates the design and manufacturing risks associated with discrete buck implementations.
**Technical architecture**: The ISL8200MIRZ uses a voltage-mode PWM controller with internal loop compensation. The internal MOSFETs and inductor are co-packaged to minimize parasitic loop inductance, achieving high efficiency (typically >90% at 5V input to 3.3V output at moderate loads) and reduced EMI. The current-share bus allows multiple ISL8200M modules to operate in master-slave configuration with ±10% current matching.
**Typical applications** include datacom/telecom equipment (48V-to-PoL), FPGA/ASIC core and auxiliary rails, servers and storage area networks, and industrial point-of-load regulation. Designers favor it where PCB real estate is constrained or where rapid time-to-market outweighs the per-ampere cost of a discrete design.
**Design consideration**: Place input bulk capacitors within 5 mm of the module's VIN pins to minimize parasitic inductance, and use the exposed thermal pad for both thermal dissipation and the electrical ground return. The current-share pin must be tied together on all paralleled modules; floating it disables parallel operation.
**Unique value**: This page combines distributor pricing, EOL/last-time-buy status, same-family pin-compatible alternatives, and practical parallel-operation notes - information not consolidated on the manufacturer datasheet or distributor product pages.
Аналоги без доработки для ISL8200MIRZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ISL8200MIRZ (тот же форм-фактор и посадочное место) — отличается по Output Voltage Range, RoHS Status, Topology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ISL8200MIRZ-T
✅ Прямая замена✓ В наличии
$10.05 / шт.
Открыть даташит →ISL8200AM
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ISL8225MIRZ-T
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ISL8200MIRZ Максимальные параметры и электрические характеристики
| Топология | Non-Isolated PoL Module, Step-Down (Buck) |
| Количество выходов | 1 |
| Диапазон входного напряжения | 4.5 V to 20 V |
| Диапазон выходного напряжения | 0.6 V to 6 V (adjustable) |
| Output Current | 10 A continuous |
| Current Share | Yes - parallel up to 6 modules (60 A) |
| КПД | Up to ~95% (load/input dependent) |
| Integrated Components | PWM controller, MOSFETs, inductor, compensation |
| Выход Power Good | Yes |
| Плавный пуск | Adjustable (external capacitor) |
| Protection Features | OCP, OVP, OTP, UVLO |
| Рабочая температура | -40 C to +85 C (industrial) |
| Корпус | QFN-style thermally-enhanced surface mount |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant (per Renesas product page) |
Руководство по цоколевке ISL8200MIRZ в корпусе qfn-style thermally-enhanced surface mount
Цоколевка для ISL8200MIRZ (корпус qfn-style thermally-enhanced surface mount). Этот силовой прибор имеет выводы затвора, стока и истока. Для неполяризованных корпусов обратитесь к техническому описанию производителя для точной ориентации вывода 1 и деталей посадочного места. Типичные применения включают проектирование источников питания, управление двигателями и коммутацию нагрузки.
Нет подробных данных о распиновке для ISL8200MIRZ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ISL8200MIRZ подходит для 6 применениеs: FPGA Core and Auxiliary Rails, Datacom and Telecom Point-of-Load, Server and Storage ASIC Power, Industrial 12V Bus Systems, Parallel Operation for 60A+ Rails, Test and Measurement Instrumentation.
FPGA Core and Auxiliary Rails
The ISL8200MIRZ is well matched to powering FPGA core, auxiliary, and transceiver rails in datacom and telecom designs. The 10A continuous current and adjustable 0.6V-6V output range cover the typical FPGA rail set: 1.0V core, 1.8V auxiliary, 2.5V transceiver, and 3.3V I/O. The current-share pin enables multiple ISL8200M modules to be paralleled for high-current FPGA cores (>10A), achieving ±10% phase-to-phase current matching without external balancing ICs. Engineers favor this module when PCB real estate is constrained because the integrated inductor, MOSFETs, and compensation eliminate ~20 external components. Post-EOL, the ISL8200AM should be evaluated as an active successor.
Рекомендуется
Datacom and Telecom Point-of-Load
The ISL8200MIRZ was designed specifically for 12V intermediate bus architectures used in datacom and telecom equipment. Accepting 4.5V-20V input, it can be powered directly from a 12V bus or from a front-end 48V-to-12V intermediate bus converter. The 0.6V minimum output supports modern ASIC and SoC core rails, while the 10A capability handles single-rail loads up to ~60W. The high level of integration reduces EMI vs. discrete buck designs, simplifying CE/FCC compliance in dense rack-mount systems.
Рекомендуется
Server and Storage ASIC Power
Server motherboards and RAID controllers demand compact, high-efficiency point-of-load regulation. The ISL8200MIRZ's 90-95% typical efficiency at 12V-to-3.3V conversion keeps thermal rise manageable in 1U/2U rack chassis, and the integrated inductor eliminates a tall through-hole component that would otherwise complicate airflow. The exposed thermal pad provides direct heatsinking to an inner PCB ground plane. Designers of new server boards should note the EOL status and plan migration to the ISL8200AM or a modern alternative PoL IC.
Рекомендуется
Industrial 12V Bus Systems
Industrial PLCs, motor controllers, and ruggedized embedded systems often use a 12V or 24V internal bus. The ISL8200MIRZ accepts up to 20V input, which fits directly off a regulated 12V rail but is below the typical 24V industrial bus voltage. For 24V industrial bus applications, a pre-regulator (24V-to-12V) is required before the ISL8200M. The -40C to +85C industrial temperature range supports harsh factory environments. After the April 2026 EOL, industrial customers should qualify the ISL8200AM or a non-pin-compatible alternative module.
Рекомендуется
Parallel Operation for 60A+ Rails
Up to six ISL8200MIRZ modules can be paralleled via the current-share pin to deliver 60A (or more) to a single high-current rail, making the module useful for ASICs, GPUs, and multi-core processors requiring >50W of core power. The ISHARE bus negotiates master/slave roles automatically, achieving ±10% current matching. Designers must tie the ISHARE pins of all paralleled modules together on the PCB and provide adequate input/output bulk capacitance to handle the combined inrush current at startup. This is a key differentiator vs. discrete PoL solutions which require an external current-share controller.
Рекомендуется
Test and Measurement Instrumentation
Bench-top test equipment, ATE systems, and laboratory instruments demand clean, low-noise rails for precision analog and mixed-signal subsystems. The ISL8200MIRZ provides a fixed-frequency PWM that produces predictable, repeatable EMI signatures, simplifying CE/FCC pre-compliance testing. The PGOOD output enables sequenced power-up of multi-rail instruments, while the adjustable soft-start controls inrush into downstream bulk capacitors. For new instrument designs after EOL, the ISL8200AM offers similar performance in active production status.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ISL8200MIRZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ISL8200MIRZ-T | ISL8200AM | ISL8225MIRZ-T |
|---|---|---|---|---|
| Brand | Renesas Electronics (formerly Intersil) | Renesas Electronics - same | Renesas Electronics - same | Renesas Electronics - same |
| Package | QFN-style thermally-enhanced SMD | QFN-style thermally-enhanced SMD - same | QFN-style thermally-enhanced SMD - same family | QFN-style thermally-enhanced SMD - same family |
| Lifecycle Status | Obsolete (EOL April 2026) | Obsolete (EOL April 2026) | Active (Renesas recommended successor) | Active (same family) |
| Pinout Compatibility | Reference design | Identical (same die) | Same family, verify pin-by-pin vs datasheet | Same family dual-output variant, different pinout - requires PCB review |
Ключевые отличия
- Same-die drop-in option still purchasable (против ISL8200MIRZ-T)
- Active lifecycle status in same family (против ISL8200AM)
- Fully integrated PoL module (controller + FETs + magnetics) (против Discrete buck converter designs)
Заметки по проектированию
The ISL8200MIRZ uses a thermally-enhanced QFN-style package with a bottom-side exposed thermal pad. The pad MUST be soldered to the PCB ground plane, and the ground plane should extend as a copper pour beneath the module with thermal vias to inner/outer copper layers. At 10A load with 12V-to-3.3V conversion (~87% efficiency), the module dissipates approximately 1.3W - well within the package rating with proper PCB layout. Skipping the thermal pad solder connection or omitting the copper pour can push junction temperature above the +125C limit at high ambient temperatures.
Place input bulk capacitors within 5mm of the module's VIN pins and output capacitors within 5mm of VOUT, using wide copper traces or pours to minimize parasitic inductance. A 22uF ceramic + 100uF polymer aluminum combination per module is a typical starting point; derate capacitance based on DC bias of the ceramic. The exposed thermal pad must be grounded and stitched with thermal vias (typically 0.3mm drill, 1mm pitch, 9-12 vias minimum).
Three common pitfalls when using the ISL8200MIRZ: (1) Floating the ISHARE pin disables parallel operation - when using a single module, tie ISHARE to a defined voltage per datasheet (do not leave NC); (2) Exceeding 20V input triggers permanent MOSFET damage - add a TVS or upstream fuse for 24V industrial bus applications; (3) Post-April 2026 EOL, verify part date code and chain-of-custody from independent distributors to avoid counterfeit or remarked parts.
The ISL8200MIRZ was discontinued by Renesas in April 2026 per industry reporting. No pin-compatible drop-in successor has been released. For new designs, Renesas recommends the ISL8200AM (active status, same 10A/6V/20V family). Cross-brand alternatives (TI TPSM, ADI LTM series) require complete PCB redesign due to different pinouts. Last-time-buy inventory may be available from independent distributors but should be qualified and date-coded before use in production designs.
Информация о соответствии
RoHS and REACH compliance per Renesas/Intersil product page. Not AEC-Q100 qualified - this is a commercial/industrial-grade power module, not an automotive part. Post-EOL, compliance certificates for new manufacturing lots are no longer issued; existing inventory retains the compliance status it was originally qualified under.
