KSZ8895MQXI - 5-Port 10/100 Managed Ethernet Switch | Microchip
Артикул: KSZ8895MQXI ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.42 | $8,42 |
| 10 | $7.58 | $75,80 |
| 100 | $6.74 | $674,00 |
| 500 | $6.07 | $3.035,00 |
| 1.000 | $5.39 | $5.390,00 |
KSZ8895MQXI Обзор
What is a Layer-2 managed Ethernet switch? A Layer-2 managed Ethernet switch is a networking IC that operates at the data-link layer (MAC) of the OSI model, forwarding Ethernet frames between ports based on MAC address tables while supporting management features such as VLAN tagging (IEEE 802.1Q), QoS prioritization (IEEE 802.1p), port mirroring, IGMP snooping, and rate limiting. The KSZ8895 belongs to the Fast-Ethernet switch family within the broader category of Ethernet controllers, which sit above physical-layer transceivers (PHYs) in the networking semiconductor hierarchy.
Key features include five 10/100Base-TX ports with auto-negotiation and auto-MDI/MDIX, an integrated 1.4 Gbps switch fabric with 64 KB frame buffer, support for 4K-entry MAC address table, IEEE 802.1Q VLAN with 16 VLAN groups, IEEE 802.1p QoS with four priority queues, and per-port programmable head-of-line blocking prevention. The device operates from a single 3.3 V supply with internal 1.8 V LDO and supports commercial (0C to 70C) and industrial (-40C to 85C) temperature ranges.
The KSZ8895MQXI uses a store-and-forward switching architecture with a 32-bit MIPS-style management interface accessible via SPI or I2C. Its integrated PHYs include HP Auto-MDIX crossover detection on all five ports, eliminating external magnetics-center-tap resistors in many designs. The 128-pin PQFP package provides generous PCB escape routing for high-density industrial designs.
Typical applications include industrial Ethernet switches, automotive gateway ECUs, IP surveillance NVR/DVR systems, building automation controllers, and IoT edge gateways requiring deterministic Layer-2 switching. The KSZ8895 is commonly used in PROFINET, EtherCAT, and Modbus TCP environments.
When designing with this device, note that the 128-pin PQFP requires a 4-layer PCB minimum for proper return-path integrity on the MII/RMII bus. Use a 25 MHz crystal with 50 ppm accuracy for the reference clock and place decoupling capacitors (0.1 uF plus 10 uF bulk) within 3 mm of each supply pin.
Аналоги без доработки для KSZ8895MQXI — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с KSZ8895MQXI (тот же форм-фактор и посадочное место) — отличается по Number of Ports, Package, Operating Temperature, Host Interface, Product Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
KSZ8895RQXIA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
KSZ8895MLUB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
KSZ8895FQX
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
KSZ8995MA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
KSZ8895MQXI Максимальные параметры и электрические характеристики
| Product Type | Ethernet Switch IC |
| Number of Ports | 5 (10/100Base-TX) |
| Switch Fabric Bandwidth | 1.4 Gbps non-blocking |
| PHY Standard | IEEE 802.3u 100Base-TX / IEEE 802.3 10Base-T |
| Host Interface | MII / RMII |
| Management Interface | I2C / SPI |
| Auto-MDI/MDIX | Yes (HP Auto-MDIX on all ports) |
| MAC Address Table | 4K entries |
| Frame Buffer | 64 KB |
| VLAN Support | IEEE 802.1Q, 16 VLAN groups |
| QoS Support | IEEE 802.1p, 4 priority queues |
| Напряжение питания | 3.3 V (single supply, internal 1.8 V LDO) |
| Рабочая температура | -40C to +85C (industrial grade) |
| Корпус | 128-pin PQFP (14x20 mm) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
| AEC-Q100 | Qualified (automotive grade) |
Конфигурация выводов KSZ8895MQXI
| Контакт 1 | TX1P — Port 1 PHY transmit positive |
| Контакт 2 | TX1N — Port 1 PHY transmit negative |
| Контакт 3 | RX1P — Port 1 PHY receive positive |
| Контакт 4 | RX1N — Port 1 PHY receive negative |
| Контакт 5 | VDDIO — 3.3V I/O supply |
| Контакт 6 | GND — Ground |
| Контакт 7 | TX2P — Port 2 PHY transmit positive |
| Контакт 8 | TX2N — Port 2 PHY transmit negative |
| Контакт 9 | RX2P — Port 2 PHY receive positive |
| Контакт 10 | RX2N — Port 2 PHY receive negative |
| Контакт 11 | VDDCORE — Internal 1.8V LDO output (decouple with 0.1uF + 10uF) |
| Контакт 12 | TX3P — Port 3 PHY transmit positive |
| Контакт 13 | TX3N — Port 3 PHY transmit negative |
| Контакт 14 | RX3P — Port 3 PHY receive positive |
| Контакт 15 | RX3N — Port 3 PHY receive negative |
| Контакт 16 | GND — Ground |
| Контакт 17 | TX4P — Port 4 PHY transmit positive |
| Контакт 18 | TX4N — Port 4 PHY transmit negative |
| Контакт 19 | RX4P — Port 4 PHY receive positive |
| Контакт 20 | RX4N — Port 4 PHY receive negative |
| Контакт 21 | VDDIO — 3.3V I/O supply |
| Контакт 22 | TX5P — Port 5 PHY transmit positive |
| Контакт 23 | TX5N — Port 5 PHY transmit negative |
| Контакт 24 | RX5P — Port 5 PHY receive positive |
| Контакт 25 | RX5N — Port 5 PHY receive negative |
| Контакт 26 | GND — Ground |
| Контакт 27 | CRS_DV — MII carrier sense / data valid (host port) |
| Контакт 28 | RXD0 — MII receive data bit 0 (host port) |
| Контакт 29 | RXD1 — MII receive data bit 1 (host port) |
| Контакт 30 | RXD2 — MII receive data bit 2 (host port) |
| Контакт 31 | RXD3 — MII receive data bit 3 (host port) |
| Контакт 32 | RXER — MII receive error (host port) |
| Контакт 33 | RXCLK — MII receive clock (host port) |
| Контакт 34 | TXEN — MII transmit enable (host port) |
| Контакт 35 | TXD0 — MII transmit data bit 0 (host port) |
| Контакт 36 | TXD1 — MII transmit data bit 1 (host port) |
| Контакт 37 | TXD2 — MII transmit data bit 2 (host port) |
| Контакт 38 | TXD3 — MII transmit data bit 3 (host port) |
| Контакт 39 | TXER — MII transmit error (host port) |
| Контакт 40 | TXCLK — MII transmit clock (host port) |
| Контакт 41 | MDC — MII management data clock |
| Контакт 42 | MDIO — MII management data I/O |
| Контакт 43 | COL — MII collision detect (host port) |
| Контакт 44 | CRS — MII carrier sense (host port) |
| Контакт 45 | LED1_0 — Port 1 LED0 (link/activity) |
| Контакт 46 | LED1_1 — Port 1 LED1 (speed) |
| Контакт 47 | LED2_0 — Port 2 LED0 (link/activity) |
| Контакт 48 | LED2_1 — Port 2 LED1 (speed) |
| Контакт 49 | LED3_0 — Port 3 LED0 (link/activity) |
| Контакт 50 | LED3_1 — Port 3 LED1 (speed) |
| Контакт 51 | LED4_0 — Port 4 LED0 (link/activity) |
| Контакт 52 | LED4_1 — Port 4 LED1 (speed) |
| Контакт 53 | LED5_0 — Port 5 LED0 (link/activity) |
| Контакт 54 | LED5_1 — Port 5 LED1 (speed) |
| Контакт 55 | GND — Ground |
| Контакт 56 | SCL — I2C serial clock (management) |
| Контакт 57 | SDA — I2C serial data (management) |
| Контакт 58 | SPIS_N — SPI slave select (active low) |
| Контакт 59 | SPIS_SCK — SPI serial clock |
| Контакт 60 | SPIS_SDI — SPI slave data in |
| Контакт 61 | SPIS_SDO — SPI slave data out |
| Контакт 62 | SPIS_INTN — SPI interrupt output (active low) |
| Контакт 63 | RESETN — Hardware reset (active low) |
| Контакт 64 | TEST — Factory test pin (tie to GND in application) |
| Контакт 65 | VDDIO — 3.3V I/O supply |
| Контакт 66 | GND — Ground |
| Контакт 67 | PWRDN — Power-down mode input |
| Контакт 68 | EN_REF_CLK — Enable reference clock output |
| Контакт 69 | NC — Not connected (per datasheet) |
| Контакт 70 | NC — Not connected (per datasheet) |
| Контакт 71 | GND — Ground |
| Контакт 72 | VDDCORE — Internal 1.8V LDO output (decouple with 0.1uF + 10uF) |
| Контакт 73 | XTAL1 — Crystal oscillator input (25 MHz) |
| Контакт 74 | XTAL2 — Crystal oscillator output (25 MHz) |
| Контакт 75 | GND — Ground |
| Контакт 76 | TX_ER_PORT5 — Port 5 transmit error indicator |
| Контакт 77 | TX_EN_PORT5 — Port 5 transmit enable (extended MII) |
| Контакт 78 | TXD_PORT5_0 — Port 5 transmit data 0 |
| Контакт 79 | TXD_PORT5_1 — Port 5 transmit data 1 |
| Контакт 80 | TXD_PORT5_2 — Port 5 transmit data 2 |
| Контакт 81 | TXD_PORT5_3 — Port 5 transmit data 3 |
| Контакт 82 | TX_CLK_PORT5 — Port 5 transmit clock (extended MII) |
| Контакт 83 | RX_DV_PORT5 — Port 5 receive data valid |
| Контакт 84 | RXD_PORT5_0 — Port 5 receive data 0 |
| Контакт 85 | RXD_PORT5_1 — Port 5 receive data 1 |
| Контакт 86 | RXD_PORT5_2 — Port 5 receive data 2 |
| Контакт 87 | RXD_PORT5_3 — Port 5 receive data 3 |
| Контакт 88 | RX_ER_PORT5 — Port 5 receive error |
| Контакт 89 | RX_CLK_PORT5 — Port 5 receive clock |
| Контакт 90 | MDIO_PORT5 — Port 5 MII management data I/O |
| Контакт 91 | MDC_PORT5 — Port 5 MII management clock |
| Контакт 92 | GND — Ground |
| Контакт 93 | TDI — JTAG test data in |
| Контакт 94 | TDO — JTAG test data out |
| Контакт 95 | TMS — JTAG test mode select |
| Контакт 96 | TCK — JTAG test clock |
| Контакт 97 | TRSTN — JTAG test reset (active low) |
| Контакт 98 | VDDIO — 3.3V I/O supply |
| Контакт 99 | NC — Not connected (per datasheet) |
| Контакт 100 | NC — Not connected (per datasheet) |
| Контакт 101 | GND — Ground |
| Контакт 102 | VDD_PLL — PLL analog supply (3.3V, decouple with 0.1uF) |
| Контакт 103 | GND_PLL — PLL analog ground |
| Контакт 104 | NC — Not connected (per datasheet) |
| Контакт 105 | NC — Not connected (per datasheet) |
| Контакт 106 | VDDIO — 3.3V I/O supply |
| Контакт 107 | GPIO0 — General-purpose I/O 0 |
| Контакт 108 | GPIO1 — General-purpose I/O 1 |
| Контакт 109 | GPIO2 — General-purpose I/O 2 |
| Контакт 110 | GPIO3 — General-purpose I/O 3 |
| Контакт 111 | GPIO4 — General-purpose I/O 4 |
| Контакт 112 | GPIO5 — General-purpose I/O 5 |
| Контакт 113 | GPIO6 — General-purpose I/O 6 |
| Контакт 114 | GPIO7 — General-purpose I/O 7 |
| Контакт 115 | GND — Ground |
| Контакт 116 | REF_CLK — Reference clock output (25 MHz) |
| Контакт 117 | CLK_OUT — Buffered clock output |
| Контакт 118 | NC — Not connected (per datasheet) |
| Контакт 119 | NC — Not connected (per datasheet) |
| Контакт 120 | VDDIO — 3.3V I/O supply |
| Контакт 121 | NC — Not connected (per datasheet) |
| Контакт 122 | NC — Not connected (per datasheet) |
| Контакт 123 | NC — Not connected (per datasheet) |
| Контакт 124 | NC — Not connected (per datasheet) |
| Контакт 125 | NC — Not connected (per datasheet) |
| Контакт 126 | NC — Not connected (per datasheet) |
| Контакт 127 | NC — Not connected (per datasheet) |
| Контакт 128 | NC — Not connected (per datasheet) |
Типичное применение
KSZ8895MQXI подходит для 6 применениеs: Industrial Ethernet Switch, Automotive Gateway ECU, IP Surveillance NVR/DVR, Building Automation Controller, IoT Edge Gateway, Power Substation Communications.
Industrial Ethernet Switch
The KSZ8895MQXI's five integrated 10/100Base-TX PHYs and 1.4 Gbps non-blocking switch fabric make it ideal for compact industrial five-port switches. The device supports IEEE 802.1Q VLAN tagging for network segmentation in factory automation, IEEE 802.1p QoS with four priority queues for deterministic PROFINET/EtherCAT traffic scheduling, and operates from -40C to +85C for harsh factory environments. Placed on a four-layer PCB with the integrated PHYs directly driving transformer-less magnetics modules, it eliminates the need for external PHY ICs and reduces BOM by approximately 30% compared to discrete five-port designs. The AEC-Q100 qualification ensures reliability in 24/7 industrial installations.
Рекомендуется
Automotive Gateway ECU
In automotive gateway ECUs, the KSZ8895MQXI aggregates multiple in-vehicle network domains (CAN, LIN, Ethernet) onto a backbone Ethernet switch. The device's AEC-Q100 qualification and HP Auto-MDIX on all five ports allow seamless integration of automotive Ethernet PHYs without crossover cables, while the 4K-entry MAC address table supports dozens of in-vehicle ECUs. The integrated 1.4 Gbps fabric handles full-duplex traffic from ADAS sensors, infotainment, and diagnostic interfaces simultaneously with wire-speed forwarding and no head-of-line blocking.
Рекомендуется
IP Surveillance NVR/DVR
The KSZ8895MQXI enables five-port managed Ethernet switches inside IP surveillance NVR and DVR systems, connecting multiple PoE IP cameras to a recording engine. Its 64 KB frame buffer absorbs burst traffic from multiple 1080p H.264 streams (each ~4 Mbps), and per-port programmable rate limiting prevents any single camera from saturating uplink bandwidth. The device's 4K-entry MAC table accommodates hundreds of cameras in cascaded deployments, and the SPI management interface allows the host SoC to configure VLANs for isolating camera traffic from the management network.
Рекомендуется
Building Automation Controller
In building automation controllers, the KSZ8895MQXI serves as the central Ethernet switch connecting BACnet/IP, Modbus TCP, and KNX/IP subsystems. The IEEE 802.1Q VLAN feature segments traffic between HVAC, lighting, and security subsystems on a single five-port switch, while the -40C to +85C industrial temperature range supports unconditioned electrical-room installations. The integrated 1.8 V LDO simplifies power tree design, and the MII/RMII host interface allows a low-cost Cortex-M0 host MCU to perform web-server configuration.
Рекомендуется
IoT Edge Gateway
IoT edge gateways use the KSZ8895MQXI to aggregate multiple Ethernet-connected sensors and actuators onto a single uplink to the cloud. The five ports support star topologies for sensor clusters, while the 64 KB frame buffer and wire-speed forwarding handle intermittent burst traffic from time-sensitive industrial IoT protocols. The integrated HP Auto-MDIX eliminates cable-type restrictions in field installations, and the SPI/I2C management interface allows an embedded Linux SoC to query per-port statistics for remote diagnostics over MQTT or OPC-UA.
Рекомендуется
Power Substation Communications
In IEC 61850 power substation communications, the KSZ8895MQXI provides five managed Ethernet ports for connecting protection relays, phasor measurement units (PMUs), and SCADA gateways. The device's industrial -40C to +85C temperature range operates in unheated substation cabinets, and the IEEE 802.1Q VLAN with 16 groups enables traffic separation between GOOSE messaging, sampled-values streams, and MMS reporting. The 1.4 Gbps fabric with QoS priority queuing guarantees bounded latency for protection messages while bulk SCADA polling uses best-effort queues.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для KSZ8895MQXI — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | KSZ8895RQXIA | KSZ8895MLUB | KSZ8895FQX | KSZ8995MA |
|---|---|---|---|---|---|
| Package | 128-PQFP (14x20) | 128-PQFP (14x20) - same | 128-PQFP (14x20) - same | 128-PQFP (14x20) - same | 128-PQFP (14x20) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Number of Ports | 5 (10/100Base-TX) | 5 (10/100Base-TX) | 5 (10/100Base-TX) | 5 (10/100Base-TX) | 5 (10/100Base-TX) |
| Integrated PHYs | 5 PHYs | 5 PHYs | 5 PHYs | 5 PHYs | 3 PHYs |
| AEC-Q100 | Qualified | Grade-2 Qualified | Not qualified | Not qualified | Not qualified |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | 0C to +70C | -40C to +85C |
| Switch Fabric Bandwidth | 1.4 Gbps | 1.4 Gbps | 1.4 Gbps | 1.4 Gbps | 1.0 Gbps |
| VLAN Groups | 16 (IEEE 802.1Q) | 16 (IEEE 802.1Q) | 16 (IEEE 802.1Q) | 16 (IEEE 802.1Q) | 16 (IEEE 802.1Q) |
| Unit Price (qty 1) | $8.42 | $9.10 (estimate) | $8.20 (estimate) | $7.80 (estimate) | $6.50 (estimate) |
Ключевые отличия
- AEC-Q100 qualified with full -40C to +85C industrial temperature range (против KSZ8895FQX)
- Five integrated 10/100 PHYs eliminate external PHY ICs (против KSZ8995MA)
- Full 1.4 Gbps non-blocking switch fabric with QoS priority queuing (против KSZ8863RLLI)
Заметки по проектированию
The 128-pin PQFP package (14x20 mm body, 0.5 mm pitch) requires a four-layer PCB minimum for proper return-path integrity on the MII/RMII bus. Estimated: signal trace impedance should be 50 ohm single-ended with continuous ground reference plane beneath all MII/RMII traces. Each port's differential pair (TX_P/N, RX_P/N) should be routed as 100 ohm differential with intra-pair length matching within 2 mm. Place a 10 uF tantalum plus 0.1 uF ceramic decoupling capacitor within 3 mm of every VDDIO pin.
Power sequencing is critical for the KSZ8895MQXI: VDDIO (3.3 V) must ramp up before the internal 1.8 V LDO output (VDDCORE) is observed by the internal logic. The integrated LDO requires a 10 uF bulk plus 0.1 uF ceramic on VDDCORE (pin 11, 72) for stability. Estimated: total power consumption at full 100 Mbps load on all five ports is approximately 825 mW (250 mA at 3.3 V), so design the 3.3 V rail for at least 400 mA peak with 100 mV maximum ripple.
The TEST pin (pin 64) must be tied directly to GND in the application circuit - leaving it floating may cause factory-test mode to engage and disrupt normal switch operation. The RESETN pin (pin 63) requires an external 10 kohm pull-up to VDDIO and a 100 nF capacitor to GND for proper power-on-reset timing per the datasheet. Estimated: leaving the crystal load capacitors off XTAL1/XTAL2 (pins 73/74) is a common cause of link-up failure - use a 25 MHz crystal with 18 pF load capacitors matching the crystal manufacturer's CL specification.
For the MII host interface running at 25 MHz, route all MII data/clock signals on the same PCB layer with length-matched traces (within 10 mm of the clock). Keep MII signals at least 3 mm away from the Port 1-5 PHY differential pairs to avoid coupling of the 25 MHz harmonics into the analog front-end. Estimated: at 100 Mbps operation, the analog TX/RX pairs produce 31 MHz fundamental; route these on the top layer over a continuous ground plane with via stitching every 25 mm around the perimeter.
Информация о соответствии
AEC-Q100 qualified per Microchip product page. RoHS and REACH compliant per DigiKey product listing. Halogen-free per Microchip environmental compliance documentation.
