onsemi

LM2901DG - Quad Comparator, 3-36 V, 14-SOIC | onsemi

Артикул: LM2901DG ✓ Активен
3 V to 36 V Vdss 1 mA Id 14-SOIC Package
MOQ: 1 |

LM2901DG Обзор

The onsemi LM2901DG is a single-supply quad differential comparator with four general-purpose channels, a 3 V to 36 V supply range, open-collector CMOS/TTL-compatible outputs, and a 14-pin SOIC package. Each channel offers a typical response time of 1.3 us, making the device suitable for level detection, low-level sensing, and memory applications. The package supports both single and split-supply operation.

A comparator is an analog integrated circuit that compares two input voltages and changes its output state when one input becomes higher than the other. The LM2901 belongs to the comparator hierarchy within analog and mixed-signal semiconductors. Its four independent channels can evaluate separate thresholds, monitor multiple control signals, or implement sensing functions where a logic-compatible indication is preferable to a continuously amplified analog output.

Key features include a wide 3 V to 36 V single-supply operating range, dual-supply operation from ±1.5 V to ±18 V, and open-collector outputs compatible with CMOS and TTL. The maximum input bias current is 0.25 uA at 5 V, while typical low-level specifications include 25 nA input bias current, ±5 nA input offset current, and 130 mV low-output saturation voltage at 4 mA. These characteristics make the device appropriate for low-current threshold-detection circuits.

The four comparators share a common supply arrangement but operate independently, allowing separate reference and signal inputs for each channel. Open-collector outputs require an external pull-up resistor and can be wired for wired-AND behavior. The LM2901DG is identified as a CMOS, open-collector, TTL-compatible device, making it suitable for interfacing with both older TTL logic and CMOS control systems. Response time remains short enough for supervisory, sequencing, and discrete threshold applications.

Typical uses include industrial control-system threshold detection, automotive sensing interfaces, consumer equipment level supervision, and memory-device address or control comparisons. The 3 V minimum supply also permits operation from regulated 5 V rails, while the 36 V maximum supports higher-voltage industrial systems when suitable input protection is applied. Each open-collector output can directly drive a pull-up-connected digital input or relay driver stage.

For robust PCB design, place the pull-up resistor close to the output and maintain short, stable traces for sensitive threshold inputs. Account for input offset voltage when the decision point is critical, and prevent unused comparator inputs from floating. Confirm absolute maximum input and output ratings against the system rails before applying signals near the supply limits.

This page combines the LM2901DG operating envelope, drop-in comparison data, pin and package guidance, and application-oriented design notes. It also distinguishes the device from electrically similar quad comparators so engineers can assess supply range, output architecture, common-mode behavior, and timing before replacing an existing part.

Аналоги без доработки для LM2901DG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM2901DG (тот же форм-фактор и посадочное место) — отличается по Comparator Type, Operating Temperature Range, Package.

Texas Instruments
Comparator Type: Quad differential voltage comparator
Operating Temperature Range: -40 °C to +125 °C
Package: 14-pin SOIC
Сравнить с LM2901DG →

LM2901D

✅ Прямая замена
Texas Instruments
📦 14-SOIC
Quad differential voltage comparator · 4 channels · Single supply, 5 V to 36 V · ±1 V to ±18 V · 30 V · Open collector · 300 ns · 25 nA typical

Уточнить цену

Открыть даташит →

LM2901DT

✅ Прямая замена
📦 14-SOIC
Same LM2901-family quad-comparator role and 14-SOIC footprint; supply, common-mode, and timing limits require comparison.

📋 Справочный аналог (нет в каталоге)

LM2901A

✅ Прямая замена
📦 14-SOIC
Same general-purpose quad-comparator function and 14-SOIC package; input-offset and common-mode specifications may differ.

📋 Справочный аналог (нет в каталоге)

LM2901DG Максимальные параметры и электрические характеристики

Comparator Type General Purpose
Number of Comparators 4
Single-Supply Voltage Range 3 V to 36 V
Dual-Supply Voltage Range ±1.5 V to ±18 V
Response Time 1.3 us
Тип выхода Open Collector
Output Compatibility CMOS, TTL
Ток потребления 1 mA
Maximum Input Bias Current 0.25 uA at 5 V
Typical Low Input Bias Current 25 nA
Typical Input Offset Current ±5 nA
Typical Low Output Saturation Voltage 130 mV at 4 mA
Диапазон рабочих температур -40°C to +105°C
Корпус 14-SOIC
Тип монтажа Surface Mount

Руководство по цоколевке LM2901DG в корпусе 14-soic

Цоколевка для LM2901DG (корпус 14-soic). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 14-soic для LM2901DG

Нет подробных данных о распиновке для LM2901DG.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

LM2901DG подходит для 6 применениеs: Industrial Threshold Detection, Automotive Sensing Interface, Memory Control and Level Sensing, Power-Supply Supervision, Consumer Equipment Level Detection, Industrial Control Signal Conditioning.

🏭

Industrial Threshold Detection

The LM2901DG fits industrial threshold-detection circuits because four independent channels can monitor separate signals within one 14-SOIC package. Its 3 V to 36 V single-supply range accommodates regulated 5 V control systems and higher-voltage industrial rails, while the typical 1.3 us response supports prompt supervision functions. Use each channel to compare a sensed voltage with a reference and drive an open-collector pull-up node. Account for input offset voltage when the switching threshold must remain precise, and apply external protection if field wiring can exceed the comparator input ratings.

🚗

Automotive Sensing Interface

The LM2901DG can translate low-level automotive sensor conditions into CMOS or TTL-compatible logic states using its open-collector outputs. The 3 V to 36 V supply range provides useful flexibility in 12 V vehicle electrical systems, and the four channels allow multiple thresholds to be evaluated independently. Pull-up the outputs to the logic rail used by a controller or indicator driver. Because automotive qualification status is not stated for this exact suffix, use the part only after confirming environmental, EMC, and quality requirements for the target vehicle program.

🖥️

Memory Control and Level Sensing

The LM2901DG is suited to memory-related level sensing because it provides four differential channels, low typical input bias current of 25 nA, and a typical response time of 1.3 us. Each comparator can evaluate a memory-control signal against a reference and produce an open-collector indication for the surrounding logic. The open-collector architecture permits wired-AND implementations when multiple channels share a pull-up. Place the pull-up close to the output and keep sensitive input traces away from switching nodes to reduce false threshold transitions.

⚡

Power-Supply Supervision

The LM2901DG can supervise multiple power rails or control signals by comparing each input against an accurate reference and driving an open-collector output. Its 3 V to 36 V supply operation covers both low-voltage digital rails and higher-voltage systems, and the four-channel arrangement reduces component count. Use a resistor divider when the monitored voltage exceeds the input range, and select a pull-up voltage compatible with the supervisory logic. The typical 1.3 us response is sufficient for non-critical power-state detection rather than fast overcurrent protection.

📱

Consumer Equipment Level Detection

The LM2901DG supports consumer-equipment level detection by providing four channels for comparing control voltages, sensor outputs, or interface signals against thresholds. Its low typical input bias current of 25 nA helps limit interference with high-impedance sensing circuits, while CMOS and TTL output compatibility simplifies connection to mixed logic families. The open-collector output requires a pull-up and can be used to combine multiple indications. Verify the input common-mode range at the chosen supply voltage and avoid leaving unused inputs floating.

🔧

Industrial Control Signal Conditioning

The LM2901DG can condition digital control signals by comparing a noisy or offset analog input with a reference and presenting an open-collector result to a controller. The 1.3 us typical response supports common sequencing and interlock functions, while the -40°C to +105°C rating suits industrial equipment. Add hysteresis with positive feedback when chatter near the threshold would be problematic. Keep reference components close to the relevant input pins and provide a defined pull-up rail for every output used by the controller.

Сводка рекомендуемых товаров

LM2901D Texas Instruments Используется в: Industrial Threshold Detection, Automotive Sensing Interface, Memory Control and Level Sensing, Power-Supply Supervision, Consumer Equipment Level Detection LM2901DT LM2901-family comparison alternative Используется в: Industrial Threshold Detection, Memory Control and Level Sensing, Consumer Equipment Level Detection, Industrial Control Signal Conditioning LM2901A Alternative general-purpose quad comparator family Используется в: Automotive Sensing Interface, Power-Supply Supervision, Industrial Control Signal Conditioning
What is the operating voltage of the LM2901DG?
The LM2901DG operates from 3 V to 36 V with a single supply and from ±1.5 V to ±18 V with dual supplies. According to the onsemi LM2901DG datasheet, the 3 V lower limit supports regulated 5 V systems, while the 36 V upper limit provides additional headroom for industrial and automotive sensing circuits. Input and output absolute maximum ratings must still be checked against the actual system rails.
What does LM2901DG do and how many comparators are inside?
The LM2901DG contains four independent general-purpose differential comparators in one 14-pin SOIC package. Each channel compares two analog input voltages and controls an open-collector output. According to the onsemi LM2901DG datasheet, the device is intended for level detection, low-level sensing, and memory applications, allowing four related sensing or decision functions to share one package.
Is LM2901DG compatible with TTL and CMOS outputs?
Yes, the LM2901DG uses open-collector outputs compatible with CMOS and TTL. The onsemi LM2901DG datasheet identifies both output formats, and the listed saturation voltage is typically 130 mV at 4 mA. A pull-up resistor is required because the output transistor pulls the node low but does not actively drive it high, allowing the interface voltage to be selected from the receiving logic rail.
What is the response time of LM2901DG?
The LM2901DG has a typical response time of 1.3 us. According to the onsemi LM2901DG datasheet, this timing is suitable for level detection, low-level sensing, memory-control functions, and general supervisory circuits where a millisecond-scale response is unnecessary. Actual end-to-end delay also depends on the input overdrive, external pull-up resistance, load capacitance, and the logic device connected to the open-collector output.
Where can I download the LM2901DG datasheet PDF?
The LM2901DG datasheet PDF is available through the onsemi document link at https://www.alldatasheet.com/datasheet-pdf/pdf/513870/ONSEMI/LM2901DG.html. The manufacturer describes the part as a single-supply quad comparator, and the document contains the electrical characteristics, package information, and connection details needed for design review. Use the pin-description table when assigning PCB nets.
Where is the LM2901DG pinout located?
The LM2901DG pinout is shown in the manufacturer datasheet and describes a 14-pin SOIC quad comparator. Each of the four channels uses differential inputs, while every output requires an external pull-up resistor. Because a public pin list was not reproduced for this page, assign PCB tracks from the datasheet pin-description table rather than relying on package position alone.
What is the best drop-in replacement for LM2901DG?
The Texas Instruments LM2901D is a strong drop-in candidate because it is identified as a 14-SOIC open-collector quad comparator with the same LM2901 family function. The STMicroelectronics LM2901DT and 3PEAK LM2901A are also listed as relevant equivalents for review. Confirm supply range, common-mode limits, input offset, output timing, and pull-up requirements in each manufacturer datasheet before production substitution.
Can LM2901D replace LM2901DG without changing the PCB?
The LM2901D from Texas Instruments can generally be evaluated as a same-package replacement because it is described as a 14-SOIC open-collector quad comparator. However, functional family membership alone does not guarantee every operating parameter is identical. Confirm pin functions, supply limits, common-mode input range, input offset voltage, output-current capability, and propagation timing against the onsemi datasheet.
What can replace LM2901DG in a 14-SOIC design?
Possible replacements include the Texas Instruments LM2901D, STMicroelectronics LM2901DT, and 3PEAK LM2901A because each appears in cross-reference results for the LM2901 family and is associated with a 14-SOIC form. Treat this as a shortlist rather than an automatic substitution. Verify differential input polarity, open-collector output behavior, supply range, timing, and electrical limits for the specific channel and test conditions.
LM2901DG vs LM2901D — which is better for a 5 V control system?
Both devices use a 14-SOIC quad-comparator format and support open-collector outputs, making the LM2901D a practical alternative for a 5 V control system. The onsemi LM2901DG is specified for 3 V to 36 V single-supply operation and includes a 1.3 us typical response time. Choose based on verified common-mode limits, input offset, output timing, temperature coverage, qualification, and lifecycle requirements rather than package appearance alone.
When should I choose LM2901DG over another quad comparator?
Choose the LM2901DG when the design needs four general-purpose channels, a 3 V to 36 V single-supply range, open-collector CMOS/TTL-compatible outputs, and a typical 1.3 us response time. It is especially useful for level detection, low-level sensing, and memory applications. Select an alternative when it offers a required qualification, tighter offset specification, different output architecture, or better lifecycle assurance.
Is LM2901DG suitable for industrial threshold detection?
The LM2901DG is suitable for industrial threshold detection because it combines four channels with a 3 V to 36 V supply range and an operating temperature range of -40°C to +105°C. Its 25 nA typical input bias current supports low-leakage sensing, while the open-collector output permits a defined pull-up voltage. Add input clamping and surge protection when field wiring can exceed the device ratings.
Is LM2901DG in stock and what is its lead time?
Current inventory, minimum order quantity, and lead time should be requested through the Request a Quote form on this page. The distributor product page identifies LM2901DG as orderable, but it does not establish a guaranteed stock position for the requested quantity. The form is the appropriate route for date-specific availability, production scheduling, and package quantity confirmation.
Where can I buy LM2901DG online?
Use the Request a Quote form on this page to request LM2901DG availability, commercial terms, and a production lead time for the required quantity. The onsemi LM2901DG is cataloged in a 14-SOIC package and is identified by the manufacturer as an active general-purpose quad comparator. Quote requests help confirm current lifecycle, exact suffix, delivery format, and quantity allocation.
What is the price of LM2901DG?
Use the Request a Quote form on this page for a current LM2901DG quote covering the required quantity and delivery format. Pricing for a catalog component can vary with order volume, package, and market conditions, so a static unit figure is not used here. The same form can also establish current availability, lead time, and supporting documentation.
What are the key specifications of LM2901DG that engineers should know?
The LM2901DG is a four-channel general-purpose comparator with a 3 V to 36 V single-supply range, ±1.5 V to ±18 V dual-supply capability, open-collector CMOS/TTL outputs, and a typical 1.3 us response time. Additional design-critical values include 25 nA typical input bias current, ±5 nA typical input offset current, 130 mV typical saturation voltage at 4 mA, and a -40°C to +105°C operating range.
What is the best Texas Instruments equivalent for LM2901DG?
The Texas Instruments LM2901D is the leading Texas Instruments equivalent identified for the LM2901DG because both are open-collector general-purpose quad comparators offered in a 14-SOIC package. This makes it the most practical board-level candidate to evaluate. Production use still requires a datasheet-level review of supply range, common-mode operation, input offset, output saturation, response timing, and temperature limits.

Справочные инженерные данные для LM2901DG — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the LM2901DG for general-purpose threshold detection, low-level sensing, memory-related logic, and power supervision where four channels, open-collector outputs, and a 3 V to 36 V supply range are useful. Its typical 1.3 us response and CMOS/TTL-compatible outputs suit conventional control logic, while 25 nA typical input bias current helps when sensing high-impedance sources. Consider the Texas Instruments LM2901D as the first same-package alternative when a second-source quad comparator is needed. Review the STMicroelectronics LM2901DT and 3PEAK LM2901A when their qualifications or detailed electrical limits better match the application. In every case, compare common-mode range, differential input limits, offset, response timing, output saturation, temperature coverage, and pull-up requirements before approving a drop-in replacement.

Сравнение с аналогами

Параметр Этот товар LM2901D LM2901DT LM2901A
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Brand onsemi Texas Instruments STMicroelectronics 3PEAK
Number of Comparators 4 4 4 4

Ключевые отличия

  • Wide single-supply operating range (против LM2901D)
  • Four independent general-purpose channels (против LM2901DT)
  • Low typical input bias and offset currents (против LM2901A)

Заметки по проектированию

Place the pull-up resistor for each used open-collector output close to the corresponding output pin and receiver. This minimizes the trace that can pick up noise between the comparator and the logic input. Route differential comparison inputs as a compact pair, keep them away from switching-power nodes, and place the reference divider or source near the appropriate input to reduce susceptibility to common-mode interference.

Do not connect an open-collector output to a supply rail without a pull-up resistor; the output transistor only pulls the node toward ground. Select a resistor that satisfies the receiver's input-current requirement while keeping the comparator's sink current within its specified operating range. Also connect every unused comparator input to a defined valid potential because floating inputs can oscillate and create unwanted supply-current changes.

Use positive-feedback hysteresis when the compared signals cross slowly or noise could cause repeated output transitions near the threshold. Choose the resistor network to create a controlled hysteresis band without increasing input bias effects or violating differential input limits. For high-impedance sensors, the typical 25 nA input bias current and ±5 nA typical input offset current should be included in the error budget.

Decouple the supply pins locally with a high-frequency ceramic capacitor and a bulk capacitor appropriate for the switching rate and trace impedance. Keep the supply return path short because the four channels share the same supply network. Although the listed operating range extends to 36 V, design transients, inductive spikes, and input excursions separately because absolute maximum ratings and common-mode limits are not interchangeable with the normal operating range.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement was identified for the exact LM2901DG suffix. The comparator itself is an analog IC rather than an automotive-qualified product designation, so AEC-Q100 status requires separate qualification review.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LM2901DG datasheet LM2901DG pinout LM2901DG datasheet pdf LM2901DG equivalent LM2901DG replacement LM2901DG cross reference LM2901DG vs LM2901D LM2901DG footprint LM2901DG application circuit onsemi LM2901DG LM2901DG 14-SOIC comparator LM2901DG price LM2901DG stock

Связанные компоненты & термины

onsemi LM2901DG LM2901D LM2901DT LM2901A Texas Instruments STMicroelectronics 3PEAK quad comparator differential comparator analog comparator analog integrated circuit semiconductor open-collector output CMOS TTL 14-SOIC SOIC family surface mount single-supply operation dual-supply operation level detection low-level sensing memory applications input bias current input offset current response time RoHS REACH AEC-Q100
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ