LM2901DG - Quad Comparator, 3-36 V, 14-SOIC | onsemi
MPN: LM2901DG ✓ 啟用中LM2901DG 概覽
A comparator is an analog integrated circuit that compares two input voltages and changes its output state when one input becomes higher than the other. The LM2901 belongs to the comparator hierarchy within analog and mixed-signal semiconductors. Its four independent channels can evaluate separate thresholds, monitor multiple control signals, or implement sensing functions where a logic-compatible indication is preferable to a continuously amplified analog output.
Key features include a wide 3 V to 36 V single-supply operating range, dual-supply operation from ±1.5 V to ±18 V, and open-collector outputs compatible with CMOS and TTL. The maximum input bias current is 0.25 uA at 5 V, while typical low-level specifications include 25 nA input bias current, ±5 nA input offset current, and 130 mV low-output saturation voltage at 4 mA. These characteristics make the device appropriate for low-current threshold-detection circuits.
The four comparators share a common supply arrangement but operate independently, allowing separate reference and signal inputs for each channel. Open-collector outputs require an external pull-up resistor and can be wired for wired-AND behavior. The LM2901DG is identified as a CMOS, open-collector, TTL-compatible device, making it suitable for interfacing with both older TTL logic and CMOS control systems. Response time remains short enough for supervisory, sequencing, and discrete threshold applications.
Typical uses include industrial control-system threshold detection, automotive sensing interfaces, consumer equipment level supervision, and memory-device address or control comparisons. The 3 V minimum supply also permits operation from regulated 5 V rails, while the 36 V maximum supports higher-voltage industrial systems when suitable input protection is applied. Each open-collector output can directly drive a pull-up-connected digital input or relay driver stage.
For robust PCB design, place the pull-up resistor close to the output and maintain short, stable traces for sensitive threshold inputs. Account for input offset voltage when the decision point is critical, and prevent unused comparator inputs from floating. Confirm absolute maximum input and output ratings against the system rails before applying signals near the supply limits.
This page combines the LM2901DG operating envelope, drop-in comparison data, pin and package guidance, and application-oriented design notes. It also distinguishes the device from electrically similar quad comparators so engineers can assess supply range, output architecture, common-mode behavior, and timing before replacing an existing part.
直接替換替代品,適用於 LM2901DG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM2901DG (相同外形與佔位) — 差異在於 Comparator Type, Operating Temperature Range, Package.
LM2901D
✅ 直接替換聯絡詢價
查看資料表 →LM2901DT
✅ 直接替換📋 參考替代品(不在目錄中)
LM2901A
✅ 直接替換📋 參考替代品(不在目錄中)
LM2901DG 最大額定值與電氣特性
| Comparator Type | General Purpose |
| Number of Comparators | 4 |
| Single-Supply Voltage Range | 3 V to 36 V |
| Dual-Supply Voltage Range | ±1.5 V to ±18 V |
| Response Time | 1.3 us |
| 輸出類型 | Open Collector |
| Output Compatibility | CMOS, TTL |
| 供應電流 | 1 mA |
| Maximum Input Bias Current | 0.25 uA at 5 V |
| Typical Low Input Bias Current | 25 nA |
| Typical Input Offset Current | ±5 nA |
| Typical Low Output Saturation Voltage | 130 mV at 4 mA |
| 工作溫度範圍 | -40°C to +105°C |
| 封裝 | 14-SOIC |
| 安裝類型 | Surface Mount |
LM2901DG 14-soic 腳位配置指南
LM2901DG(14-soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM2901DG.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM2901DG 適用於 6 應用s: Industrial Threshold Detection, Automotive Sensing Interface, Memory Control and Level Sensing, Power-Supply Supervision, Consumer Equipment Level Detection, Industrial Control Signal Conditioning.
Industrial Threshold Detection
The LM2901DG fits industrial threshold-detection circuits because four independent channels can monitor separate signals within one 14-SOIC package. Its 3 V to 36 V single-supply range accommodates regulated 5 V control systems and higher-voltage industrial rails, while the typical 1.3 us response supports prompt supervision functions. Use each channel to compare a sensed voltage with a reference and drive an open-collector pull-up node. Account for input offset voltage when the switching threshold must remain precise, and apply external protection if field wiring can exceed the comparator input ratings.
推薦
Automotive Sensing Interface
The LM2901DG can translate low-level automotive sensor conditions into CMOS or TTL-compatible logic states using its open-collector outputs. The 3 V to 36 V supply range provides useful flexibility in 12 V vehicle electrical systems, and the four channels allow multiple thresholds to be evaluated independently. Pull-up the outputs to the logic rail used by a controller or indicator driver. Because automotive qualification status is not stated for this exact suffix, use the part only after confirming environmental, EMC, and quality requirements for the target vehicle program.
推薦
Memory Control and Level Sensing
The LM2901DG is suited to memory-related level sensing because it provides four differential channels, low typical input bias current of 25 nA, and a typical response time of 1.3 us. Each comparator can evaluate a memory-control signal against a reference and produce an open-collector indication for the surrounding logic. The open-collector architecture permits wired-AND implementations when multiple channels share a pull-up. Place the pull-up close to the output and keep sensitive input traces away from switching nodes to reduce false threshold transitions.
推薦
Power-Supply Supervision
The LM2901DG can supervise multiple power rails or control signals by comparing each input against an accurate reference and driving an open-collector output. Its 3 V to 36 V supply operation covers both low-voltage digital rails and higher-voltage systems, and the four-channel arrangement reduces component count. Use a resistor divider when the monitored voltage exceeds the input range, and select a pull-up voltage compatible with the supervisory logic. The typical 1.3 us response is sufficient for non-critical power-state detection rather than fast overcurrent protection.
推薦
Consumer Equipment Level Detection
The LM2901DG supports consumer-equipment level detection by providing four channels for comparing control voltages, sensor outputs, or interface signals against thresholds. Its low typical input bias current of 25 nA helps limit interference with high-impedance sensing circuits, while CMOS and TTL output compatibility simplifies connection to mixed logic families. The open-collector output requires a pull-up and can be used to combine multiple indications. Verify the input common-mode range at the chosen supply voltage and avoid leaving unused inputs floating.
推薦
Industrial Control Signal Conditioning
The LM2901DG can condition digital control signals by comparing a noisy or offset analog input with a reference and presenting an open-collector result to a controller. The 1.3 us typical response supports common sequencing and interlock functions, while the -40°C to +105°C rating suits industrial equipment. Add hysteresis with positive feedback when chatter near the threshold would be problematic. Keep reference components close to the relevant input pins and provide a defined pull-up rail for every output used by the controller.
推薦
推薦產品摘要
工程參考資料,適用於 LM2901DG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM2901D | LM2901DT | LM2901A |
|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | onsemi | Texas Instruments | STMicroelectronics | 3PEAK |
| Number of Comparators | 4 | 4 | 4 | 4 |
主要差異化特點
- Wide single-supply operating range (對比LM2901D)
- Four independent general-purpose channels (對比LM2901DT)
- Low typical input bias and offset currents (對比LM2901A)
設計說明
Place the pull-up resistor for each used open-collector output close to the corresponding output pin and receiver. This minimizes the trace that can pick up noise between the comparator and the logic input. Route differential comparison inputs as a compact pair, keep them away from switching-power nodes, and place the reference divider or source near the appropriate input to reduce susceptibility to common-mode interference.
Do not connect an open-collector output to a supply rail without a pull-up resistor; the output transistor only pulls the node toward ground. Select a resistor that satisfies the receiver's input-current requirement while keeping the comparator's sink current within its specified operating range. Also connect every unused comparator input to a defined valid potential because floating inputs can oscillate and create unwanted supply-current changes.
Use positive-feedback hysteresis when the compared signals cross slowly or noise could cause repeated output transitions near the threshold. Choose the resistor network to create a controlled hysteresis band without increasing input bias effects or violating differential input limits. For high-impedance sensors, the typical 25 nA input bias current and ±5 nA typical input offset current should be included in the error budget.
Decouple the supply pins locally with a high-frequency ceramic capacitor and a bulk capacitor appropriate for the switching rate and trace impedance. Keep the supply return path short because the four channels share the same supply network. Although the listed operating range extends to 36 V, design transients, inductive spikes, and input excursions separately because absolute maximum ratings and common-mode limits are not interchangeable with the normal operating range.
合規資訊
No definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement was identified for the exact LM2901DG suffix. The comparator itself is an analog IC rather than an automotive-qualified product designation, so AEC-Q100 status requires separate qualification review.