onsemi

LM2901VD - 36V Quad Differential Comparator | onsemi

Артикул: LM2901VD ✓ Активен
3 V to 36 V Vdss 25 nA typical Id 14-pin SOIC Package
MOQ: 1 |

LM2901VD Обзор

The onsemi LM2901VD is a four-channel differential comparator designed for level detection, low-level sensing, and memory applications, with a 3 V to 36 V operating range and a typical input bias current of 25 nA. The device is packaged in a 14-pin SOIC and provides open-collector outputs suitable for wired logic interfaces. Each of the four independent comparators compares its non-inverting and inverting inputs and produces a logic-level indication of their relative voltages.

A differential comparator is an analog interface IC that converts the relationship between two input voltages into a digital output. In the broader semiconductor hierarchy, the LM2901VD belongs to the comparator family, which sits alongside amplifiers and other interface ICs. It is used where a system must establish whether a measured voltage is above or below a reference, such as in power-supply threshold detection, signal conditioning, and simple control systems.

Key features include single-supply or split-supply operation, a typical input bias current of 25 nA, and a typical input offset current of ±5.0 nA. The low input bias current reduces loading on high-impedance source circuits, which is useful when the comparator monitors a sensor or resistor-divider output. The wide 3 V to 36 V supply range supports industrial control systems, automotive equipment, consumer products, and embedded memory interfaces.

The open-collector output architecture requires an external pull-up resistor and permits the output to be pulled to a selected logic voltage. This feature enables connection to TTL-compatible systems and allows multiple comparator outputs to share a bus when suitable wired logic behavior is acceptable. The four independent channels can perform separate threshold, window, or sensing functions without sharing an internal signal path.

Typical applications include overvoltage and undervoltage detection, battery monitoring, industrial sensor interfaces, memory address decoding, automotive logic systems, and general-purpose control equipment. Because the output is open collector, designers should account for pull-up resistor selection, output rise time, bus capacitance, and the voltage and current ratings of the pull-up network.

The principal design consideration is common-mode and supply compatibility. Input and output conditions must remain within the limits stated in the manufacturer datasheet, and the external pull-up must not exceed the output transistor's voltage rating. The 14-pin SOIC footprint also requires adequate spacing between adjacent analog inputs to reduce noise coupling.

This page combines the manufacturer function description, package information, electrical highlights, verified sourcing links, drop-in comparison options, and practical circuit-design guidance to support faster component evaluation and PCB planning.

Аналоги без доработки для LM2901VD — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM2901VD (тот же форм-фактор и посадочное место) — отличается по Comparator Type, Logic Compatibility, Number of Channels, Supply Voltage Range.

Texas Instruments
Comparator Type: Quad differential voltage comparator
Logic Compatibility: TTL, CMOS, MOS, DTL, and ECL
Number of Channels: 4 channels
Сравнить с LM2901VD →

LM2901DG

✅ Прямая замена
onsemi
📦 SOIC-14
General Purpose · 4 · 3 V to 36 V · ±1.5 V to ±18 V · 1.3 us · Open Collector · CMOS, TTL · 1 mA

Уточнить цену

Открыть даташит →

NCV2901DR2G

✅ Прямая замена
📦 SOIC-14
Same four-channel open-collector comparator concept and 14-SOIC footprint; channel count and 36 V supply ceiling differ by 0%, with automotive or enhanced qualification requiring review.

📋 Справочный аналог (нет в каталоге)

LM2901D

✅ Прямая замена
Texas Instruments
📦 SOIC-14
Quad differential voltage comparator · 4 channels · Single supply, 5 V to 36 V · ±1 V to ±18 V · 30 V · Open collector · 300 ns · 25 nA typical

Уточнить цену

Открыть даташит →

LM2901V-Q1

✅ Прямая замена
📦 SOIC-14
Same four-channel 14-SOIC architecture and 36 V supply ceiling; channel count differs by 0%, with automotive qualification providing a distinct temperature-grade use case.

📋 Справочный аналог (нет в каталоге)

LM2901QDRQ1

✅ Прямая замена
📦 SOIC-14
Same four-channel 14-SOIC architecture and 36 V supply ceiling; channel count differs by 0%, while automotive qualification distinguishes it from the general-purpose target.

📋 Справочный аналог (нет в каталоге)

LM2901VD Максимальные параметры и электрические характеристики

Comparator Type 4-channel differential comparator
Supply Voltage Range 3 V to 36 V
Input Bias Current 25 nA typical
Input Offset Current ±5.0 nA typical
Тип выхода Open collector
Logic Compatibility TTL compatible
Supply Configuration Single or split supply
Number of Channels 4
Корпус 14-pin SOIC
Тип монтажа Surface mount
Primary Application Level detection, low-level sensing, and memory applications

Руководство по цоколевке LM2901VD в корпусе 14-pin soic

Цоколевка для LM2901VD (корпус 14-pin soic). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 14-pin soic для LM2901VD

Нет подробных данных о распиновке для LM2901VD.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

LM2901VD подходит для 6 применениеs: Industrial Overvoltage Detection, Battery Low-Level Sensing, Memory Address Decoding, High-Impedance Sensor Interfacing, Automotive Logic and Fault Monitoring, Consumer Equipment Level Control.

🏭

Industrial Overvoltage Detection

The LM2901VD is appropriate for industrial threshold monitoring because it combines four differential channels with a 3 V to 36 V supply range. Each comparator can compare a divided supply-voltage signal against a reference and indicate when the monitored rail crosses a defined limit. Its typical 25 nA input bias current reduces the measurement error introduced by high-value divider resistors. The open-collector outputs can drive a system fault input through a pull-up resistor, allowing the board to distinguish normal and overvoltage states without adding a separate analog-to-digital converter. Industrial designs should verify common-mode limits, output timing, pull-up values, and isolation between adjacent channels during component qualification.

🔋

Battery Low-Level Sensing

The LM2901VD can support battery low-level sensing in equipment operating from a wide supply range. Its four channels allow several battery thresholds, charger states, or divided cell voltages to be evaluated independently. The 25 nA typical input bias current is especially useful with resistive dividers because it minimizes loading of the sensed node. A comparator output can remain open during the detected state and be pulled high by an external resistor, allowing a low-power controller to recognize a fault without continuous conversion. The exact battery chemistry and operating voltages must remain within the comparator's common-mode and supply limits, and the pull-up network should be chosen to balance current consumption against switching speed.

🖥️

Memory Address Decoding

The LM2901VD is specifically suited to memory applications that require digital decisions from analog voltage relationships. Four independent comparator channels can evaluate multiple address, enable, or control lines and translate those conditions into open-collector logic states. The 14-pin SOIC keeps four channels in a compact surface-mount footprint, while the 3 V to 36 V supply capability permits operation from industrial and automotive-compatible rails. External pull-up resistors establish the inactive output level and may also support a wired-logic arrangement where appropriate. Because open-collector outputs rise through the pull-up network, propagation and rise time should be checked against the memory device's setup and hold requirements.

🧩

High-Impedance Sensor Interfacing

The LM2901VD is useful when a sensor produces a slowly changing voltage that must be converted into a logic event. Its typical input bias current of 25 nA limits the current drawn from a high-impedance source, helping preserve the intended sensor signal. Four channels can monitor several thresholds or provide a window function by comparing the sensed voltage with upper and lower references. The open-collector output can trigger an interrupt, alarm, or control input when the crossing occurs. Designers should minimize PCB leakage around the input nodes, use suitable reference sources, and confirm that the sensor's voltage range remains within the common-mode operating region specified by the manufacturer.

🚗

Automotive Logic and Fault Monitoring

The wide 3 V to 36 V operating range makes the LM2901VD family suitable for automotive-style electrical systems where a comparator must recognize voltage levels rather than measure them precisely. Four channels can support battery, actuator, sensor, and connectivity fault decisions. The typical 25 nA input bias current helps when monitoring high-impedance dividers, and open-collector outputs permit wired interface behavior when the system design supports it. For production automotive use, engineers should select a part with the required automotive qualification, validate transient and ESD requirements, and confirm that every input and output remains within the selected device's absolute-maximum ratings.

📱

Consumer Equipment Level Control

The LM2901VD can implement simple level decisions in consumer equipment, including power-good detection, battery status indication, input limiting, and mode switching. Four channels provide several threshold functions in one 14-pin SOIC without requiring a dedicated microcontroller ADC for every decision. The device accepts a 3 V to 36 V supply range, while its low typical input bias current reduces interference with divider-based sensing networks. Open-collector outputs are flexible for driving an enable, status LED, or logic input because the pull-up voltage can be selected independently. The design should account for the open-collector rise time, supply-current demand, common-mode limits, and the possibility that an adjacent switching node could couple noise into a high-impedance input.

Сводка рекомендуемых товаров

LM2901D Texas Instruments Используется в: Industrial Overvoltage Detection, Memory Address Decoding, Consumer Equipment Level Control LM2901QDRQ1 Automotive-qualified comparator family option Используется в: Industrial Overvoltage Detection, Automotive Logic and Fault Monitoring LM2901VD onsemi Используется в: Battery Low-Level Sensing, High-Impedance Sensor Interfacing LM2901DG onsemi Используется в: Battery Low-Level Sensing, Consumer Equipment Level Control NCV2901DR2G Same-family open-collector comparator option Используется в: Memory Address Decoding LM2901V-Q1 Temperature-qualified quad comparator candidate Используется в: High-Impedance Sensor Interfacing, Automotive Logic and Fault Monitoring
What is the operating voltage of LM2901VD?
The onsemi LM2901VD operates from 3 V to 36 V. According to the onsemi LM2901VD datasheet, this broad supply range supports single-supply and split-supply operation. The four internal comparators can therefore be used in low-voltage logic systems, industrial equipment, automotive electronics, and other applications where the input and output conditions remain within the ratings specified by the manufacturer.
What are the key specifications of LM2901VD that engineers should know?
The LM2901VD is a four-channel differential comparator with a 3 V to 36 V supply range, 25 nA typical input bias current, and ±5.0 nA typical input offset current. Its open-collector outputs require external pull-up resistors. According to the onsemi datasheet, the low input bias current reduces loading on high-impedance sensors and reference dividers while the four independent channels support multiple sensing or threshold functions.
Where can I download the LM2901VD datasheet PDF?
The LM2901VD datasheet is accessible through the onsemi-oriented PDF page listed on this page and through the direct DiGi Electronics PDF link in the data sources. The manufacturer datasheet defines the complete pinout, electrical limits, common-mode range, propagation characteristics, and recommended application conditions. Use the pin-description table and absolute-maximum ratings from that document when assigning PCB tracks and designing pull-up networks.
Where can I find the LM2901VD pinout?
The LM2901VD uses a 14-pin SOIC package, and its complete pin assignments are shown in the pin-description table of the onsemi datasheet. The external pull-up connections belong on the open-collector output pins, while the power and ground pins must follow the manufacturer's numbering. Use the pin-description table rather than inferring connections from a generic quad-comparator diagram, because numbering conventions differ among comparator families.
What can replace the LM2901VD?
The LM2901VD can be replaced by a pin-compatible 14-SOIC quad comparator only after checking input common-mode limits, output current, propagation delay, and supply operation against the original design. LM2901DG, NCV2901DR2G, Texas Instruments LM2901D, LM2901V-Q1, and LM2901QDRQ1 are identified comparison candidates. Each candidate uses the 14-SOIC format, but qualification, exact limits, and production suitability must be reviewed before substitution.
Is LM2901VD the same as LM2901D?
The LM2901VD and LM2901D are closely related quad differential comparators offered by onsemi and Texas Instruments, respectively, in a 14-SOIC format. Their manufacturer identities differ, so exact electrical limits, qualification, labeling, and procurement terms should be compared rather than assumed identical. The LM2901D is a candidate when its voltage range, timing, output ratings, and compliance documentation match the target circuit.
When should I choose LM2901VD over LM2901V-Q1?
Choose the LM2901VD for a general-purpose 14-SOIC comparator design when its onsemi specifications, qualification level, and sourcing requirements satisfy the application. Choose the LM2901V-Q1 when its automotive qualification and documented electrical differences better fit the end product. Both provide four comparator channels in a 14-SOIC footprint, but temperature grade, supply current, bias current, delay, and protection features can differ between manufacturers.
Is LM2901VD suitable for battery voltage detection?
The LM2901VD is suitable for many battery-threshold and low-level sensing applications because it offers a 3 V to 36 V supply range, four channels, and a typical input bias current of 25 nA. The actual battery chemistry and voltage range determine whether the operating limits provide enough margin. Designers should also confirm the common-mode input range and use the open-collector outputs with correctly sized pull-up resistors.
LM2901VD vs LM2901D: which is better for an industrial control board?
The LM2901VD is preferable when the board is designed around onsemi's LM2901 family specifications, procurement requirements, and exact qualification documentation. The LM2901D can be considered when its Texas Instruments specifications satisfy every operating limit and component-approval requirement. Both are 14-SOIC quad comparators, so the decision should emphasize common-mode range, supply current, response time, output ratings, lifecycle status, and automotive or industrial qualification.
What is the best Texas Instruments equivalent for LM2901VD?
The Texas Instruments LM2901D is the closest candidate identified for a 14-SOIC replacement because it is a quad differential comparator with an open-collector output in the same package family. Confirm its supply range, input common-mode limits, propagation delay, output current, and environmental qualification against the LM2901VD circuit. A footprint match alone does not establish that every operating condition is equivalent.
Why does the LM2901VD output require a pull-up resistor?
Each LM2901VD output uses an open-collector transistor that can pull the output low but cannot actively drive it high. An external pull-up resistor connects the output to the desired positive logic supply and completes the high-state circuit. Its value controls the sink current, output rise time, and bus loading, so the design should consider the maximum input voltage, capacitive loading, propagation behavior, and required logic levels.
Can LM2901VD be used for memory address decoding?
The LM2901VD is designed for memory applications as well as level detection and low-level sensing. Its four differential channels can compare address or control signals against reference voltages and produce logic decisions for memory-control functions. Because the outputs are open collector, the address-decoding implementation should include suitable pull-up resistors and account for the resulting rise time at the connected logic devices.
Where can I buy LM2901VD online?
Use the Request a Quote form on this page to ask about LM2901VD availability, current lead time, order quantity, and delivery requirements. The form lets the purchasing team confirm the exact 14-SOIC ordering code and provide current commercial terms without embedding a price that may quickly become outdated. Include the target quantity and required delivery date in the request.
What is the price of LM2901VD?
The current commercial price for LM2901VD should be obtained through the Request a Quote form on this page. Pricing can vary with quantity, package suffix, order breaks, delivery date, and component sourcing conditions. Include the required part number, annual usage, and purchase quantity so the quotation can reflect the correct configuration and current supply position.
Is LM2901VD in stock and what is its lead time?
Current stock and lead time for LM2901VD should be confirmed with the Request a Quote form on this page. The verified distributor listings identify the part and its commercial availability channels, but a real-time production allocation and shipment date can vary by quantity and order timing. State the required quantity, target delivery date, and acceptable packaging configuration in the request.

Справочные инженерные данные для LM2901VD — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the LM2901VD when the design needs four general-purpose differential comparators, a 3 V to 36 V operating range, low typical input bias current, and open-collector outputs in a 14-SOIC package. It is particularly suitable for level detection, low-level sensing, memory control, and threshold monitoring where pull-up resistors are acceptable. Consider LM2901DG when retaining the onsemi family is preferred and its exact qualification or ordering details fit the product. NCV2901DR2G is a candidate when its qualification and detailed limits better suit the application. Texas Instruments LM2901D is a cross-manufacturer option with the same four-channel 14-SOIC format, while LM2901V-Q1 and LM2901QDRQ1 are relevant when automotive qualification is required. In every substitution, verify the common-mode input range, absolute-maximum ratings, propagation delay, output current, temperature grade, and lifecycle status rather than relying on package compatibility alone.

Сравнение с аналогами

Параметр Этот товар LM2901DG NCV2901DR2G LM2901D LM2901V-Q1 LM2901QDRQ1
Brand onsemi onsemi onsemi Texas Instruments Texas Instruments Texas Instruments
Package SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14
Number of Channels 4 4 4 4 4 4

Ключевые отличия

  • Four independent channels in one 14-SOIC package (против LM2901D)
  • Low typical input bias current supports high-impedance sensing (против LM2901V-Q1)
  • Wide operating range supports industrial and vehicle electrical systems (против LM2901QDRQ1)

Заметки по проектированию

The LM2901VD has open-collector outputs, so every output used as a logic signal needs an external pull-up resistor. Select the pull-up supply to suit the connected logic family and confirm that its voltage does not exceed the output-pin rating. The resistor also establishes the rise time, so avoid making it unnecessarily large when long traces or loaded buses require fast transitions. Account for pull-up current when the output is held low.

Place each pull-up resistor close to the corresponding output pin to limit trace capacitance and ringing. Route the four input pairs away from switching nodes, relay contacts, inductors, and other high-energy paths. Because input bias current is typically 25 nA, even modest board contamination can influence a high-impedance input. Use a suitable board finish, keep high-impedance nodes compact, and provide a nearby ground return to reduce coupling.

Use the 3 V to 36 V operating range as a boundary rather than assuming the full interval is suitable for every input. Check the common-mode input range at each actual supply condition, including split-supply operation. Confirm absolute-maximum ratings for input and output pins, especially when pull-ups connect to a voltage above or below the comparator supply. Review input protection paths when transients or reverse connection are possible.

The 14-pin SOIC footprint provides four differential comparator channels in one compact package, but adjacent channels should be assigned according to their signal sensitivity. Keep sensitive inverting and non-inverting traces short and matched where signal integrity matters. Decouple the comparator supply close to its power pin with a local ceramic capacitor and provide an adequate return path. Verify the manufacturer's land pattern and pin numbering against the selected ordering code before fabrication.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer datasheet and product listings should be consulted for the exact package's RoHS, REACH, lead-free, halogen-free, automotive, and conflict-minerals declarations.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LM2901VD datasheet LM2901VD pinout LM2901VD datasheet pdf LM2901VD equivalent LM2901VD replacement LM2901VD cross reference LM2901VD vs LM2901D onsemi LM2901VD LM2901VD SOIC-14 comparator LM2901VD 36V comparator LM2901VD open collector output LM2901VD price LM2901VD stock LM2901VD application circuit

Связанные компоненты & термины

onsemi LM2901VD LM2901DG NCV2901DR2G Texas Instruments LM2901D LM2901V-Q1 LM2901QDRQ1 quad differential comparator comparator analog comparator interface IC semiconductor open-collector output differential input input bias current input offset current common-mode voltage split-supply operation single-supply operation level detection low-level sensing memory applications SOIC-14 surface-mount package
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ