onsemi

LM324ADTBR2G - 3-32V Quad Op Amp | onsemi | TSSOP-14

Артикул: LM324ADTBR2G ✓ Активен
3 V to 32 V Vdss 14-pin TSSOP Package
MOQ: 1 |

LM324ADTBR2G Обзор

The onsemi LM324ADTBR2G is a general-purpose, single-supply quad operational amplifier with true differential inputs, a 3 V to 32 V supply range, 0.6 V/us slew rate, and 3 mV input-offset voltage. The four amplifiers are integrated in a 14-pin TSSOP package, providing a compact solution for low-cost signal conditioning, voltage amplification, filtering, and sensor-interface circuits.

An operational amplifier, commonly called an op amp, is an analog semiconductor that uses high-gain differential amplification to improve the voltage level applied to its input signal. The LM324 belongs to the general-purpose amplifier class within the broader operational-amplifier, analog IC, and semiconductor hierarchy. Its four independent channels can process separate signals or be connected together for filtering, gain, summing, and other analog functions.

The principal advantages of the LM324 family in single-supply systems include true differential inputs, operation from a supply as low as 3 V, and support for inputs that can approach ground potential. The integrated quad arrangement reduces component count and board area when a design needs several amplifiers. These characteristics make the device practical for cost-sensitive industrial control, instrumentation, audio, communications, and embedded-system analog front ends.

Each channel consists of a differential input stage, intermediate gain stages, a push-pull output stage, and internal biasing. The output stage can source and sink current while driving typical external loads, and the device is intended for general-purpose closed-loop operation. Because it is not a rail-to-rail precision amplifier, input and output limitations must be considered when signals approach either supply rail.

Typical applications include low-level sensor amplification, transducer conditioning, active filters, comparators with hysteresis, audio preamplification, current-to-voltage conversion, and general instrumentation. In a four-channel design, the same package can implement independent amplifier blocks or a higher-order filter. Supply bypassing remains essential because four amplifiers operating in one package can share the same rail and package-level thermal environment.

For a new design, confirm input common-mode range, output swing, output-current capability, noise, offset, and stability requirements against the manufacturer datasheet before assigning gain. A 0.1 uF bypass capacitor close to the supply pins is a common starting point, while the datasheet should determine the final capacitance and compensation network for each feedback configuration.

This product page combines the exact LM324ADTBR2G order information with verified manufacturer and distributor references, same-footprint alternatives, technical comparisons, and practical analog-design guidance. The comparisons also distinguish exact drop-in options from broader functional equivalents so engineers can protect PCB compatibility while reviewing speed, offset, supply, and temperature requirements.

Аналоги без доработки для LM324ADTBR2G — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM324ADTBR2G (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Slew Rate, Input Offset Voltage, Package, Input Type.

onsemi
Amplifier Type: General Purpose
Slew Rate: 0.6 V/µs
Сравнить с LM324ADTBR2G →
onsemi
Amplifier Type: General-purpose operational amplifier
Input Type: True differential input
Сравнить с LM324ADTBR2G →
STMicroelectronics
Amplifier Type: Standard (General Purpose) Operational Amplifier
Slew Rate: 0.4 V/µs typical
Сравнить с LM324ADTBR2G →
Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Input Offset Voltage: Plus or minus 2 mV maximum for BA versions at 25 C
Package: 14-pin SOIC
Сравнить с LM324ADTBR2G →
STMicroelectronics
Amplifier Type: General Purpose
Slew Rate: 0.4 V/µs typical
Input Offset Voltage: 2 mV typical
Сравнить с LM324ADTBR2G →

LM324ADTBR2

✅ Прямая замена
onsemi
📦 14-TSSOP
General-purpose operational amplifier · 4 circuits · True differential input · 3 V to 26 V · 32 V · ±16 V · 3 mV · 0.6 V/us

Уточнить цену

Открыть даташит →

LM324ADT

✅ Прямая замена ⚠️ Характеристики не проверены
📦 14-TSSOP
Same LM324ADT family and 14-TSSOP footprint; core electrical ratings show 0% difference, with only the order-code completion differing.

📋 Справочный аналог (нет в каталоге)

LM324DT

✅ Прямая замена ⚠️ Характеристики не проверены
STMicroelectronics
📦 14-TSSOP
4 · 3 V to 32 V · ±1.5 V to ±16 V · 700 µA typical · 2 mV typical · 20 nA typical · 1.3 MHz typical · 0.4 V/µs typical

✗ Нет в наличии

$0.0827 / шт.

Открыть даташит →

LM324ADR2G

✅ Прямая замена ⚠️ Характеристики не проверены
onsemi
📦 14-TSSOP
General Purpose · 4 · 3 V to 32 V · ±1.5 V to ±16 V · 1 MHz · 0.6 V/µs · 3 mV

Уточнить цену

Открыть даташит →

LM324DR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 14-TSSOP
Quad general-purpose operational amplifier · 4 · Four independent high-gain frequency-compensated operational amplifiers · 3 V to 36 V for B versions · Plus or minus 2 mV maximum for BA versions at 25 C · 2 kV HBM for B, BA, and K versions · Internal RF and EMI filter for B and BA versions · Single supply or split supply

Уточнить цену

Открыть даташит →

LM324ADTBR2G Максимальные параметры и электрические характеристики

Amplifier Type General-purpose quad operational amplifier
Number of Channels 4 channels
Supply Voltage Range 3 V to 32 V
Supply Type Single supply
Input Type True differential inputs
Slew Rate 0.6 V/us
Input Offset Voltage 3 mV
Корпус 14-pin TSSOP
Тип монтажа Surface mount
Temperature Grade Commercial temperature grade

Руководство по цоколевке LM324ADTBR2G в корпусе 14-pin tssop

Цоколевка для LM324ADTBR2G (корпус 14-pin tssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 14-pin tssop для LM324ADTBR2G

Нет подробных данных о распиновке для LM324ADTBR2G.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

LM324ADTBR2G подходит для 6 применениеs: Sensor Signal Conditioning, Active Filtering, Audio Preamplification, Industrial Control and Instrumentation, Current-to-Voltage Conversion, Comparator and Threshold Detection.

📱

Sensor Signal Conditioning

The LM324ADTBR2G is well suited to conditioning low-level sensor signals because its four channels provide true differential inputs within one 14-pin TSSOP package. A typical circuit scales a sensor output with closed-loop feedback, applies offset adjustment, and feeds a downstream ADC. The 3 V minimum supply supports battery-powered systems, while the 3 mV input-offset specification must be included in the total error budget. Engineers should verify the sensor's common-mode range against the amplifier's input limits and keep the useful signal away from the supply rails. The 0.6 V/us slew rate also sets a practical limit on the amplitude and bandwidth of fast sensor transients, so slow sensor outputs provide the most favorable signal-to-error ratio.

🔧

Active Filtering

Each LM324ADTBR2G amplifier can implement an active low-pass, high-pass, or band-pass stage with external resistors and capacitors. Combining two channels in a second-order section helps achieve useful filtering without requiring four separate packages. The 3 V to 32 V single-supply range permits the same architecture in compact embedded equipment and higher-voltage industrial controls. Component tolerances, amplifier noise, input-offset voltage, and the finite 0.6 V/us slew rate determine practical filter performance. Place the feedback network close to the relevant amplifier pins to reduce parasitic pickup. For filters processing large signals at high frequency, calculate the required slew rate before placement because large feedback factors and high Q can increase output demand.

🎧

Audio Preamplification

The LM324ADTBR2G can provide gain for microphone, line-level, or other moderate-amplitude audio stages when broad bandwidth and low system cost matter more than precision. Its four independent channels allow a mixer or multi-channel preamplifier to be implemented in one compact TSSOP package. The 0.6 V/us slew rate becomes important for high-frequency and high-amplitude signals, so confirm the required output voltage slope against the intended peak waveform. Input-offset voltage contributes to channel-to-channel DC variation, making it unsuitable for demanding high-fidelity correction tasks. Place the input and feedback components close to the device and keep sensitive audio paths away from switching nodes and high-current digital return paths.

🏭

Industrial Control and Instrumentation

The LM324ADTBR2G's four-channel quad layout reduces component count in industrial control boards that need several low-cost analog functions. Typical uses include amplifier stages around sensors, error amplifiers, buffer stages, and active filters within 3 V to 32 V control rails. Differential inputs simplify interface design when the source has balanced outputs, while the integrated package reduces board area compared with four separate single amplifiers. Designers must account for the commercial temperature grade and verify operating limits for the final enclosure and ambient conditions. Adequate supply bypassing is particularly important because the four output stages share the same package, rail pins, and thermal environment. Use short feedback routes and a solid ground reference to maintain predictable behavior in control systems.

⚡

Current-to-Voltage Conversion

A common application for the LM324ADTBR2G is converting a small sensor current into a measurable voltage by placing a feedback resistor at the inverting input. The quad device can handle several conversion or buffer channels in a compact instrument. The 3 mV input-offset specification translates into a corresponding error across the feedback resistance, so high-value resistors can amplify both offset error and thermal noise. Select resistor values that balance signal gain against offset error, bias current, and bandwidth. The 0.6 V/us slew rate is usually non-limiting for slow process-control signals, but it should be checked for fast transient measurements. Keep the current-conversion resistor and sensitive input node compact and away from high-current switching paths.

🔧

Comparator and Threshold Detection

The LM324ADTBR2G can be configured as an open-collector comparator by applying positive feedback for hysteresis and pulling the output up with an external resistor. This is useful for slow threshold detection, fault signaling, and basic control logic in single-supply systems. Four channels permit multiple independent thresholds without requiring four packages. Because the LM324 output stage is not designed for rail-to-rail saturated logic, the pull-up resistor and valid output-logic levels must be selected from the datasheet's output-swing graph. Input common-mode range and output-current capability also constrain the threshold circuit. Keep hysteresis components close to the amplifier and avoid excessive switching-node coupling that could cause repeated threshold crossings.

What are the key specifications of LM324ADTBR2G that engineers should know?
The LM324ADTBR2G is a four-channel, general-purpose operational amplifier optimized for single-supply operation from 3 V to 32 V. Key specifications include true differential inputs, 0.6 V/us slew rate, and 3 mV input-offset voltage. The device is packaged in a 14-pin TSSOP. According to the onsemi LM324 datasheet, the four amplifiers are intended for low-cost applications where economy and supply flexibility are more important than precision or rail-to-rail performance.
Where can I download the LM324ADTBR2G datasheet PDF?
The LM324ADTBR2G datasheet can be accessed through the ON Semiconductor LM324ADTBR2G datasheet link listed on this page. The document identifies the part as a single-supply quad operational amplifier and provides the electrical characteristics, application information, and package details. Use the manufacturer datasheet for authoritative pin assignments, recommended operating conditions, input/output limits, and test methods before finalizing a high-reliability design.
Where can I find the LM324ADTBR2G pinout?
The LM324ADTBR2G pinout is the 14-pin TSSOP pin arrangement defined by the onsemi datasheet. Because the exact numbered pin names are not printed on this product page, consult the pin-description table in the manufacturer datasheet before routing PCB tracks. Treat power, ground, input, output, and compensation connections as functional blocks only until the numbered diagram has been checked against the selected device suffix.
What is the supply voltage range of LM324ADTBR2G?
The LM324ADTBR2G operates from a 3 V to 32 V single supply. The manufacturer description specifically emphasizes operation from 3 V, while distributor specifications list the device as a 3 V to 32 V quad amplifier. This makes it suitable for low-voltage embedded systems as well as higher-voltage industrial analog circuits, provided the selected output and input operating regions remain within the datasheet limits.
What can replace the LM324ADTBR2G on the same PCB?
The closest documented same-footprint replacement is the onsemi LM324ADTBR2, which shares the LM324ADT ordering family and TSSOP-14 footprint. Additional LM324 family order codes may use the same electrical architecture, but each suffix must be checked for package dimensions, temperature grade, qualification status, and electrical limits. A true drop-in decision requires pin-to-pin verification rather than relying only on the generic LM324 name.
Is LM324ADTBR2G the same as LM324ADTBR2?
The LM324ADTBR2G is an onsemi LM324-series order code in a 14-pin TSSOP package, and the LM324ADTBR2 is the closely related order code shown in the cross-reference comparison. Their common family and package make the latter the primary same-footprint candidate, but production equivalence should be confirmed from the manufacturer ordering table for temperature range, qualification, marking, and lifecycle requirements.
What is the best onsemi equivalent for LM324ADTBR2G?
The best onsemi equivalent is the LM324ADTBR2 because it belongs to the same LM324ADT order family and is identified in a direct comparison with the LM324ADTBR2G. The candidate preserves the TSSOP-14 format and quad-amplifier architecture. Before substitution, verify the exact suffix-specific temperature grade and electrical characteristics in the manufacturer ordering information and datasheet.
When should I choose LM324ADTBR2G over another LM324 variant?
Choose the LM324ADTBR2G when the design specifically calls for the onsemi LM324ADTBR2G commercial-grade order code in a 14-pin TSSOP package and its documented 3 V to 32 V single-supply performance meets the application. Choose a different LM324 suffix when its temperature grade, qualification, package, or marking better matches the production requirements. The chip family alone does not make every suffix interchangeable without those checks.
Is LM324ADTBR2G suitable for sensor signal conditioning?
The LM324ADTBR2G is suitable for many low-level sensor-signal conditioning tasks because it provides four true-differential-input amplifiers in one 14-pin TSSOP package. Its 0.6 V/us slew rate and 3 mV input offset are consistent with general-purpose conditioning rather than high-precision instrumentation. Confirm the sensor output range, required noise performance, common-mode limits, and ADC input range before fixing the gain and filter values.
What is the slew rate of LM324ADTBR2G and does it limit audio signals?
The LM324ADTBR2G has a 0.6 V/us slew rate. That rating limits how quickly the output can follow large-amplitude, high-frequency signals and can cause visible or audible distortion when the demanded slope exceeds the device capability. For ordinary audio preamplification at moderate signal levels it may be adequate, but verify peak amplitude and highest frequency against the datasheet response and distortion information.
How should I decouple the LM324ADTBR2G power supply?
Place a high-frequency bypass capacitor close to the LM324ADTBR2G supply pins and route it using a short, low-inductance path to the device ground reference. Start with the manufacturer datasheet's recommended bypass value and layout, commonly beginning near 0.1 uF. Because all four channels share the same package and supply pins, local decoupling helps prevent output-stage current transients from disturbing the other channels.
Can LM324ADTBR2G operate from a 5 V supply?
Yes, a 5 V supply falls within the LM324ADTBR2G's documented 3 V to 32 V single-supply operating range. At 5 V, however, output swing and input common-mode limitations remain important because the LM324 is not a rail-to-rail input-and-output amplifier. Bias the signal around the usable common-mode region and confirm that the required output voltage remains inside the datasheet limits.
What are the main limitations of using LM324ADTBR2G in a precision circuit?
The LM324ADTBR2G is a general-purpose rather than precision amplifier, with a stated input-offset voltage of 3 mV and a 0.6 V/us slew rate. Input bias current, noise, common-mode range, output swing, and gain error must be checked for the actual gain and signal bandwidth. It works well for moderate-accuracy conditioning, but precision or fast-signal designs should compare the complete error budget against a suitable precision or rail-to-rail amplifier.
How do I obtain the current price and lead time for LM324ADTBR2G?
Use the Request a Quote form on this page to request the current LM324ADTBR2G price, stock position, minimum order quantity, and lead time. Quote-based purchasing avoids publishing a stale price or asserting inventory without confirmation. Include the required quantity, target package suffix, shipment destination, and production schedule so the commercial response can be matched to the exact part number.
Is LM324ADTBR2G in stock?
Current stock status should be confirmed through the Request a Quote form on this page rather than inferred from a distributor landing page. Submit the exact MPN, required quantity, and delivery requirements to receive a current availability and lead-time response. For production planning, also request the manufacturer lifecycle status and any dated change or discontinuation notices affecting future procurement.
Where should I buy LM324ADTBR2G online?
The purchasing route for the LM324ADTBR2G is the Request a Quote form on this page. It allows engineers to specify quantity, target market, packaging needs, and delivery expectations without relying on a potentially outdated price or inventory claim. Submit the complete MPN LM324ADTBR2G to avoid confusion with other LM324 suffixes that may use different packages or temperature grades.

Справочные инженерные данные для LM324ADTBR2G — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the LM324ADTBR2G when the exact onsemi order code, commercial-grade four-channel architecture, and 14-pin TSSOP footprint are required for a general-purpose analog design. Its 3 V to 32 V single-supply range suits both compact embedded systems and industrial instrumentation, while the 0.6 V/us slew rate and 3 mV input-offset specification make it appropriate for moderate-speed and moderate-accuracy signal conditioning rather than precision or rail-to-rail work. The LM324ADTBR2 is the closest same-family alternative when that exact order code is acceptable. LM324ADT, LM324DT, LM324ADR, and LM324DR are same-brand family candidates for footprint-compatible review. Before approving any substitution, compare the exact suffix's pinout, temperature range, qualification, package dimensions, electrical limits, and lifecycle status. Do not choose a broader functional equivalent without checking common-mode range, output swing, stability, and input-bias-current requirements.

Сравнение с аналогами

Параметр Этот товар LM324ADTBR2 LM324ADT LM324DT LM324ADR LM324DR
Brand onsemi onsemi onsemi onsemi onsemi onsemi
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Amplifier Configuration Quad Quad Quad Quad Quad Quad
Supply Voltage Range 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V
Supply Type Single supply Single supply Single supply Single supply Single supply Single supply
Slew Rate 0.6 V/us 0.6 V/us 0.6 V/us 0.6 V/us 0.6 V/us 0.6 V/us
Input Offset Voltage 3 mV 3 mV 3 mV 3 mV 3 mV 3 mV
Input Configuration True differential inputs True differential inputs True differential inputs True differential inputs True differential inputs True differential inputs

Ключевые отличия

  • Four integrated amplifiers in a compact package (против LM324ADTBR2)
  • Wide single-supply operating range (против LM324ADT)
  • General-purpose signal performance (против LM324DT)

Заметки по проектированию

Route the supply bypass capacitor directly to the LM324ADTBR2G power and ground pins, keeping the loop short and the return path independent of noisy output-current paths. The four amplifiers share the same package and supply pins, so local decoupling helps one channel's output transients avoid modulating the other three. Follow the datasheet's recommended capacitance and, when applicable, add bulk capacitance near the supply source for longer wiring or more demanding load steps.

Do not treat the LM324ADTBR2G as rail-to-rail. Check the input common-mode range and output swing before choosing the signal bias point or maximum output amplitude, especially at low supply voltages. Also include the 3 mV input-offset specification in the error budget and verify that the 0.6 V/us slew rate can support the intended signal amplitude and bandwidth. These checks prevent clipping, gain error, and slew-rate distortion that are not apparent from the package outline alone.

Keep high-impedance input nodes and feedback components compact, and place them away from switching-regulator outputs, inductors, relay contacts, and high-current return paths. Use a continuous ground plane and connect each analog stage to a low-impedance ground reference rather than allowing output currents to share narrow traces with sensitive inputs. For long external sensor wiring, add suitable input filtering and consider differential routing to reduce common-mode pickup.

When substituting another LM324 order code, verify the package drawing, lead pitch, pin numbering, temperature grade, and qualification requirements rather than relying on the family name. The alternatives listed for LM324ADTBR2G are same-brand LM324-family candidates, but an approved alternate still requires review of the manufacturer's ordering table and datasheet for the exact suffix. Confirm that the replacement supports the intended supply range, input bias conditions, output loading, and ambient temperature.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No explicit compliance declarations were identified in the manufacturer or distributor references for this exact order code. The device is a commercial-grade general-purpose amplifier, so AEC-Q100 qualification is not claimed.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LM324ADTBR2G datasheet LM324ADTBR2G pinout LM324ADTBR2G datasheet pdf LM324ADTBR2G equivalent LM324ADTBR2G replacement LM324ADTBR2G cross reference LM324ADTBR2G vs LM324ADTBR2 LM324ADTBR2G footprint onsemi LM324ADTBR2G LM324ADTBR2G price LM324ADTBR2G stock LM324ADTBR2G application circuit LM324 TSSOP-14 op amp LM324ADTBR2G supply voltage

Связанные компоненты & термины

onsemi LM324ADTBR2G LM324ADTBR2 LM324ADT LM324DT LM324ADR LM324DR operational amplifier op amp quad operational amplifier general-purpose amplifier true differential input single-supply amplifier analog integrated circuit semiconductor 14-TSSOP TSSOP family surface-mount package SMD input offset voltage slew rate signal conditioning active filter sensor interface audio preamplifier
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ