LM324ADTBR2G - 3-32V Quad Op Amp | onsemi | TSSOP-14
부품 번호: LM324ADTBR2G ✓ 활성LM324ADTBR2G 개요
An operational amplifier, commonly called an op amp, is an analog semiconductor that uses high-gain differential amplification to improve the voltage level applied to its input signal. The LM324 belongs to the general-purpose amplifier class within the broader operational-amplifier, analog IC, and semiconductor hierarchy. Its four independent channels can process separate signals or be connected together for filtering, gain, summing, and other analog functions.
The principal advantages of the LM324 family in single-supply systems include true differential inputs, operation from a supply as low as 3 V, and support for inputs that can approach ground potential. The integrated quad arrangement reduces component count and board area when a design needs several amplifiers. These characteristics make the device practical for cost-sensitive industrial control, instrumentation, audio, communications, and embedded-system analog front ends.
Each channel consists of a differential input stage, intermediate gain stages, a push-pull output stage, and internal biasing. The output stage can source and sink current while driving typical external loads, and the device is intended for general-purpose closed-loop operation. Because it is not a rail-to-rail precision amplifier, input and output limitations must be considered when signals approach either supply rail.
Typical applications include low-level sensor amplification, transducer conditioning, active filters, comparators with hysteresis, audio preamplification, current-to-voltage conversion, and general instrumentation. In a four-channel design, the same package can implement independent amplifier blocks or a higher-order filter. Supply bypassing remains essential because four amplifiers operating in one package can share the same rail and package-level thermal environment.
For a new design, confirm input common-mode range, output swing, output-current capability, noise, offset, and stability requirements against the manufacturer datasheet before assigning gain. A 0.1 uF bypass capacitor close to the supply pins is a common starting point, while the datasheet should determine the final capacitance and compensation network for each feedback configuration.
This product page combines the exact LM324ADTBR2G order information with verified manufacturer and distributor references, same-footprint alternatives, technical comparisons, and practical analog-design guidance. The comparisons also distinguish exact drop-in options from broader functional equivalents so engineers can protect PCB compatibility while reviewing speed, offset, supply, and temperature requirements.
드롭인 대체품: LM324ADTBR2G — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LM324ADTBR2G (동일 폼 팩터 및 풋프린트) — 차이점: Amplifier Type, Slew Rate, Input Offset Voltage, Package, Input Type.
LM324ADTBR2
✅ 드롭인가격 문의
데이터시트 보기 →LM324ADT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LM324DT
✅ 드롭인 ⚠️ 사양 미검증✗ 재고 없음
$0.0827 / 개
데이터시트 보기 →LM324ADR2G
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →LM324DR
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →LM324ADTBR2G 최대 정격 & 전기적 특성
| Amplifier Type | General-purpose quad operational amplifier |
| Number of Channels | 4 channels |
| Supply Voltage Range | 3 V to 32 V |
| Supply Type | Single supply |
| Input Type | True differential inputs |
| Slew Rate | 0.6 V/us |
| Input Offset Voltage | 3 mV |
| 패키지 | 14-pin TSSOP |
| 실장 유형 | Surface mount |
| Temperature Grade | Commercial temperature grade |
LM324ADTBR2G 14-pin tssop 핀 구성 가이드
LM324ADTBR2G(14-pin tssop 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LM324ADTBR2G.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LM324ADTBR2G 적합 용도: 6 애플리케이션s: Sensor Signal Conditioning, Active Filtering, Audio Preamplification, Industrial Control and Instrumentation, Current-to-Voltage Conversion, Comparator and Threshold Detection.
Sensor Signal Conditioning
The LM324ADTBR2G is well suited to conditioning low-level sensor signals because its four channels provide true differential inputs within one 14-pin TSSOP package. A typical circuit scales a sensor output with closed-loop feedback, applies offset adjustment, and feeds a downstream ADC. The 3 V minimum supply supports battery-powered systems, while the 3 mV input-offset specification must be included in the total error budget. Engineers should verify the sensor's common-mode range against the amplifier's input limits and keep the useful signal away from the supply rails. The 0.6 V/us slew rate also sets a practical limit on the amplitude and bandwidth of fast sensor transients, so slow sensor outputs provide the most favorable signal-to-error ratio.
추천
Active Filtering
Each LM324ADTBR2G amplifier can implement an active low-pass, high-pass, or band-pass stage with external resistors and capacitors. Combining two channels in a second-order section helps achieve useful filtering without requiring four separate packages. The 3 V to 32 V single-supply range permits the same architecture in compact embedded equipment and higher-voltage industrial controls. Component tolerances, amplifier noise, input-offset voltage, and the finite 0.6 V/us slew rate determine practical filter performance. Place the feedback network close to the relevant amplifier pins to reduce parasitic pickup. For filters processing large signals at high frequency, calculate the required slew rate before placement because large feedback factors and high Q can increase output demand.
추천
Audio Preamplification
The LM324ADTBR2G can provide gain for microphone, line-level, or other moderate-amplitude audio stages when broad bandwidth and low system cost matter more than precision. Its four independent channels allow a mixer or multi-channel preamplifier to be implemented in one compact TSSOP package. The 0.6 V/us slew rate becomes important for high-frequency and high-amplitude signals, so confirm the required output voltage slope against the intended peak waveform. Input-offset voltage contributes to channel-to-channel DC variation, making it unsuitable for demanding high-fidelity correction tasks. Place the input and feedback components close to the device and keep sensitive audio paths away from switching nodes and high-current digital return paths.
추천
Industrial Control and Instrumentation
The LM324ADTBR2G's four-channel quad layout reduces component count in industrial control boards that need several low-cost analog functions. Typical uses include amplifier stages around sensors, error amplifiers, buffer stages, and active filters within 3 V to 32 V control rails. Differential inputs simplify interface design when the source has balanced outputs, while the integrated package reduces board area compared with four separate single amplifiers. Designers must account for the commercial temperature grade and verify operating limits for the final enclosure and ambient conditions. Adequate supply bypassing is particularly important because the four output stages share the same package, rail pins, and thermal environment. Use short feedback routes and a solid ground reference to maintain predictable behavior in control systems.
추천
Current-to-Voltage Conversion
A common application for the LM324ADTBR2G is converting a small sensor current into a measurable voltage by placing a feedback resistor at the inverting input. The quad device can handle several conversion or buffer channels in a compact instrument. The 3 mV input-offset specification translates into a corresponding error across the feedback resistance, so high-value resistors can amplify both offset error and thermal noise. Select resistor values that balance signal gain against offset error, bias current, and bandwidth. The 0.6 V/us slew rate is usually non-limiting for slow process-control signals, but it should be checked for fast transient measurements. Keep the current-conversion resistor and sensitive input node compact and away from high-current switching paths.
추천
Comparator and Threshold Detection
The LM324ADTBR2G can be configured as an open-collector comparator by applying positive feedback for hysteresis and pulling the output up with an external resistor. This is useful for slow threshold detection, fault signaling, and basic control logic in single-supply systems. Four channels permit multiple independent thresholds without requiring four packages. Because the LM324 output stage is not designed for rail-to-rail saturated logic, the pull-up resistor and valid output-logic levels must be selected from the datasheet's output-swing graph. Input common-mode range and output-current capability also constrain the threshold circuit. Keep hysteresis components close to the amplifier and avoid excessive switching-node coupling that could cause repeated threshold crossings.
추천
추천 제품 요약
엔지니어링 참조 데이터: LM324ADTBR2G — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LM324ADTBR2 | LM324ADT | LM324DT | LM324ADR | LM324DR |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | onsemi |
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP |
| Amplifier Configuration | Quad | Quad | Quad | Quad | Quad | Quad |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V |
| Supply Type | Single supply | Single supply | Single supply | Single supply | Single supply | Single supply |
| Slew Rate | 0.6 V/us | 0.6 V/us | 0.6 V/us | 0.6 V/us | 0.6 V/us | 0.6 V/us |
| Input Offset Voltage | 3 mV | 3 mV | 3 mV | 3 mV | 3 mV | 3 mV |
| Input Configuration | True differential inputs | True differential inputs | True differential inputs | True differential inputs | True differential inputs | True differential inputs |
주요 차별점
- Four integrated amplifiers in a compact package (vs LM324ADTBR2)
- Wide single-supply operating range (vs LM324ADT)
- General-purpose signal performance (vs LM324DT)
설계 노트
Route the supply bypass capacitor directly to the LM324ADTBR2G power and ground pins, keeping the loop short and the return path independent of noisy output-current paths. The four amplifiers share the same package and supply pins, so local decoupling helps one channel's output transients avoid modulating the other three. Follow the datasheet's recommended capacitance and, when applicable, add bulk capacitance near the supply source for longer wiring or more demanding load steps.
Do not treat the LM324ADTBR2G as rail-to-rail. Check the input common-mode range and output swing before choosing the signal bias point or maximum output amplitude, especially at low supply voltages. Also include the 3 mV input-offset specification in the error budget and verify that the 0.6 V/us slew rate can support the intended signal amplitude and bandwidth. These checks prevent clipping, gain error, and slew-rate distortion that are not apparent from the package outline alone.
Keep high-impedance input nodes and feedback components compact, and place them away from switching-regulator outputs, inductors, relay contacts, and high-current return paths. Use a continuous ground plane and connect each analog stage to a low-impedance ground reference rather than allowing output currents to share narrow traces with sensitive inputs. For long external sensor wiring, add suitable input filtering and consider differential routing to reduce common-mode pickup.
When substituting another LM324 order code, verify the package drawing, lead pitch, pin numbering, temperature grade, and qualification requirements rather than relying on the family name. The alternatives listed for LM324ADTBR2G are same-brand LM324-family candidates, but an approved alternate still requires review of the manufacturer's ordering table and datasheet for the exact suffix. Confirm that the replacement supports the intended supply range, input bias conditions, output loading, and ambient temperature.
규정 준수 정보
No explicit compliance declarations were identified in the manufacturer or distributor references for this exact order code. The device is a commercial-grade general-purpose amplifier, so AEC-Q100 qualification is not claimed.