Texas Instruments

LM358BIDR - Dual 36V 1.2MHz Op Amp | Texas Instruments

Артикул: LM358BIDR ✓ Активен
36 V Vdss 8-pin SOIC Package
MOQ: 1 |

LM358BIDR Обзор

The Texas Instruments LM358BIDR is a dual general-purpose operational amplifier with two amplifier channels, a 36 V maximum supply rating, 1.2 MHz gain-bandwidth performance, and 3 mV output offset voltage. The device is offered in an 8-pin SOIC package, making it suitable for conventional surface-mount analog signal-conditioning boards. The LM358 name identifies an industry-standard dual-amplifier configuration commonly used for amplification, buffering, filtering, and voltage comparison.

An operational amplifier is a high-gain analog building block that compares an input signal with a feedback network and drives its output toward the difference between those signals. The dual-amplifier hierarchy connects the LM358BIDR to operational amplifiers, analog amplifiers, linear amplifiers, and integrated circuits. Two independent channels in one package reduce board area while providing a common supply arrangement for industrial controls, instrumentation, sensor interfaces, and general-purpose embedded systems.

Key characteristics include two amplifier circuits, a 36 V maximum supply voltage, a 1.2 MHz gain-bandwidth product, and a 3 mV offset voltage. The 8-SOIC format supports automated surface-mount assembly and standard 1.27 mm pitch PCB layouts. Because the part is intended for broad analog applications, its useful performance depends on the selected feedback network, supply voltage, output load, input common-mode range, and required accuracy.

The LM358BIDR belongs to the LM358B family of industry-standard dual operational amplifiers. Its internally compensated architecture simplifies typical closed-loop amplifier and voltage-follower configurations. Designers should still verify input and output operating limits for the intended supply and signal ranges in the manufacturer datasheet, particularly when approaching the device's maximum rated supply voltage.

Typical applications include sensor signal conditioning, transducer amplification, analog filtering, comparator-style control loops, current-voltage conversion, audio preamplification, and general industrial signal conditioning. The dual-channel arrangement is particularly useful when a board needs two related analog channels without requiring a quad-amplifier package or two separate single-channel devices.

For PCB implementation, place input, output, feedback, and decoupling connections to minimize parasitic coupling and preserve signal integrity. Keep sensitive input traces away from high-current switching paths, use a local supply bypass capacitor, and route the ground return carefully to reduce offset and noise pickup. Confirm output-current capability and stability with the selected load before committing to the design.

This page organizes the exact LM358BIDR identity, package information, sourcing fields, replacement considerations, and application guidance into a practical engineering reference. It also distinguishes verified target-part characteristics from comparison fields that require an individual manufacturer datasheet review before a board redesign is approved.

Аналоги без доработки для LM358BIDR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM358BIDR (тот же форм-фактор и посадочное место) — отличается по Package, Amplifier Type, Maximum Supply Voltage, Gain-Bandwidth Product, Supply Voltage Range.

onsemi
Package: 14-TSSOP
Supply Voltage Range: 3 V to 26 V
Сравнить с LM358BIDR →
Texas Instruments
Package: 14-SOIC, 0.209 inch, 5.30 mm width
Amplifier Type: Quad general-purpose operational amplifier
Maximum Supply Voltage: 26 V
Сравнить с LM358BIDR →
Texas Instruments
Package: 14-SO
Amplifier Type: General-purpose operational amplifier
Maximum Supply Voltage: 26 V
Сравнить с LM358BIDR →
onsemi
Package: 14-SOIC
Supply Voltage Range: 3 V to 32 V
Сравнить с LM358BIDR →
Texas Instruments
Package: 8-SOIC (0.154 inch, 3.90 mm width)
Amplifier Type: General Purpose
Maximum Supply Voltage: 16 V
Сравнить с LM358BIDR →
onsemi
Package: 8-SOIC, 3.90 mm width
Amplifier Type: General Purpose
Gain-Bandwidth Product: 1 MHz
Сравнить с LM358BIDR →
Texas Instruments
Package: 8-SOIC
Amplifier Type: General Purpose
Maximum Supply Voltage: 32 V
Сравнить с LM358BIDR →
Texas Instruments
Package: 8-SOIC, 3.90 mm width
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 700 kHz
Сравнить с LM358BIDR →
Texas Instruments
Package: 8-SOIC
Сравнить с LM358BIDR →
Texas Instruments
Package: 8-SOIC
Amplifier Type: General Purpose
Сравнить с LM358BIDR →

LM358BAIDR

✅ Прямая замена
Texas Instruments
📦 8-SOIC
Dual operational amplifier · 2 circuits · 36 V · 1.2 MHz · 2 mV · -40°C to 85°C · 8-SOIC · Surface mount

Уточнить цену

Открыть даташит →

LM2902NSR

✅ Прямая замена
Texas Instruments
📦 8-SOIC
General-purpose operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV maximum · 14-SO · 14 pins · Surface mount

Уточнить цену

Открыть даташит →

LM2902VDG

✅ Прямая замена
onsemi
📦 8-SOIC
4 circuits · 4 channels · 3 V to 32 V · Single supply · True differential input · Quad operational amplifier · 14-SOIC · Surface mount

Уточнить цену

Открыть даташит →

LM2902KNS

✅ Прямая замена
Texas Instruments
📦 8-SOIC
Quad general-purpose operational amplifier · 4 circuits · 26 V · 3 V to 26 V · 1.2 MHz · 20 nA · 0.5 uA · 80 dB

Уточнить цену

Открыть даташит →

LM2902DTB

✅ Прямая замена
onsemi
📦 8-SOIC
Quad operational amplifier · onsemi · 3 V to 26 V · 4 circuits · 14-TSSOP · Surface mount · 1.2 MHz · 2 mV

Уточнить цену

Открыть даташит →

LM358BIDR Максимальные параметры и электрические характеристики

Number of Amplifier Channels 2 channels
Product Type Dual general-purpose operational amplifier
Maximum Supply Voltage 36 V
Gain-Bandwidth Product 1.2 MHz
Output Offset Voltage 3 mV
Корпус 8-pin SOIC
Package Pin Count 8 pins
Способ монтажа Surface mount
Amplifier Type Standard general-purpose amplifier
Number of Circuits 2 circuits

Конфигурация выводов LM358BIDR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Контакт 1 OUT1 — Amplifier 1 output
Контакт 2 IN1- — Amplifier 1 inverting input
Контакт 3 IN1+ — Amplifier 1 non-inverting input
Контакт 4 V- — Negative supply or ground connection
Контакт 5 IN2+ — Amplifier 2 non-inverting input
Контакт 6 IN2- — Amplifier 2 inverting input
Контакт 7 OUT2 — Amplifier 2 output
Контакт 8 V+ — Positive supply connection

Типичное применение

LM358BIDR подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Transducer and Current-to-Voltage Conversion, Analog Active Filtering, Audio Preamplification and Buffering, Threshold Monitoring and Control Loops, Power-Supply Feedback and Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM358BIDR is well suited to amplifying weak sensor signals because it provides two general-purpose amplifier channels, 1.2 MHz gain-bandwidth performance, and a 36 V maximum supply rating. One channel can provide gain around a bridge, resistive sensor, or low-level transducer, while the second channel can buffer the result or form a comparator for threshold control. The 8-SOIC package simplifies replacement of a through-hole LM358 layout. Verify the input common-mode range, output swing, and noise requirements against the Texas Instruments manufacturer datasheet before selecting the gain and feedback values.

⚡

Transducer and Current-to-Voltage Conversion

For current sensing, the LM358BIDR can form the transimpedance stage that converts a small current into a measurable voltage. Its 1.2 MHz gain-bandwidth product supports practical signal bandwidth for many industrial and instrumentation channels, while the two channels allow one amplifier to perform conversion and the other to provide filtering or gain. A 36 V maximum supply rating also provides useful headroom for industrial rails. The design must account for feedback capacitance, sensor capacitance, input bias current, output loading, and the amplifier's specified common-mode range.

🔧

Analog Active Filtering

The LM358BIDR can implement first- and higher-order analog filters where a discrete general-purpose dual amplifier is preferred. Two channels in an 8-SOIC package allow a Sallen-Key stage and buffer in one component, or two cascaded filter sections in a shared layout. Its 1.2 MHz gain-bandwidth product places an upper limit on the practical closed-loop bandwidth and component matching requirements, so resistor and capacitor tolerances should be evaluated together with the closed-loop noise gain. Keep the feedback network compact and validate the final response for stability and output swing.

🎧

Audio Preamplification and Buffering

The LM358BIDR can serve as a two-channel audio preamplifier or line-level buffer in general-purpose audio modules. Its dual-channel structure avoids separate single-amplifier packages for stereo routing, and the 1.2 MHz gain-bandwidth product is suitable for many non-critical audio-control paths. Because this is a general-purpose amplifier rather than a specified low-noise audio device, the noise and distortion characteristics should be reviewed before using it in a high-fidelity signal chain. Add input filtering and maintain conservative closed-loop gain to avoid clipping the available output swing.

🧩

Threshold Monitoring and Control Loops

A practical comparator-style application uses one LM358BIDR channel to compare a sensor voltage with a reference and the second channel for gain or filtering, creating a hysteretic monitoring and control function. The 36 V maximum supply rating accommodates many control-system rails, while the 8-SOIC format supports compact surface-mount assemblies. The comparator must remain inside the input common-mode range, and the output must remain within the specified swing and load limits. Add positive feedback for hysteresis where appropriate and place the reference network close to the relevant input pins.

🔋

Power-Supply Feedback and Monitoring

The LM358BIDR can monitor a power rail or participate in a feedback-control loop around a power-conversion stage. One channel may amplify a divided output-voltage sample, while the other can compare that sample with a reference and provide an error or control signal. The device's 36 V maximum supply rating is relevant when the electronics operate from a higher-voltage rail, but the input common-mode range still determines how much of the monitored output can safely be divided and presented to the amplifier. Isolate the high-voltage node and provide suitable resistor ratings and filtering.

What are the key specifications of LM358BIDR that engineers should know?
The LM358BIDR is a dual general-purpose operational amplifier with two amplifier circuits, a 36 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and a 3 mV output offset voltage in an 8-pin SOIC package. According to the Texas Instruments manufacturer datasheet, the LM358B family is an industry-standard dual operational-amplifier platform. These characteristics make it suitable for general-purpose amplification, buffering, filtering, and voltage-comparison circuits where a through-hole-era dual amplifier has been converted to a surface-mount design.
Where can I download the LM358BIDR datasheet PDF?
The official LM358BIDR datasheet is available from Texas Instruments through the manufacturer product documentation link on this page. The document identifies the device as an industry-standard dual operational amplifier and provides the electrical characteristics, package drawing, pin configuration, and application information needed for a design review. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and confirm operating limits against the intended supply voltage before releasing the layout.
Where can I find the LM358BIDR pinout?
The LM358BIDR uses an 8-pin SOIC configuration with two operational-amplifier channels and a shared supply connection. Pin 1 is amplifier 1 output, pins 2 and 3 are the inverting and non-inverting inputs, pin 4 is ground, pins 5 and 6 are the second channel inputs, pin 7 is amplifier 2 output, and pin 8 is the positive supply. According to the Texas Instruments manufacturer datasheet, this numbering should be checked against the selected package drawing before PCB fabrication.
What can replace LM358BIDR?
The LM358BIDR can be replaced by a dual operational amplifier that uses the same 8-pin SOIC footprint, preserves the pin assignments, and satisfies the required supply, bandwidth, offset, common-mode, and output-load conditions. Candidates from the LM2902 family can be evaluated for dual general-purpose amplifier designs, while LM358B family members may suit changes in temperature grade or qualification requirements. Confirm every electrical limit in the candidate manufacturer's datasheet before treating it as a drop-in replacement.
Is LM358BIDR the same as LM2902NSR?
The LM358BIDR and LM2902NSR are both dual general-purpose operational amplifiers in 8-pin SOIC-style packages, but they should not be treated as automatically identical. The LM358BIDR is identified as a 36 V, 1.2 MHz, 3 mV-offset device, while the complete LM2902 electrical specification must be checked separately. Use the LM2902NSR when its supply range, input common-mode limits, offset, output drive, temperature range, and noise performance meet the circuit requirements.
LM358BIDR vs LM358BAIDR - which is better for industrial control?
Choose the LM358BIDR when its manufacturer-rated temperature interval and electrical limits match the industrial control enclosure; choose the LM358BAIDR when its additional grade or qualification attributes satisfy the project specification. Both parts are identified in the family as dual operational amplifiers in the same 8-pin SOIC format, and the LM358BIDR is specified for a 36 V maximum supply, 1.2 MHz bandwidth, and 3 mV offset. The deciding factors are the controlled-ambient temperature range and qualification requirements.
When should I choose LM358BIDR over another dual op amp?
Choose the LM358BIDR when a new board specifically requires the established LM358B 8-SOIC footprint, two general-purpose amplifier channels, operation from a supply rated up to 36 V, and approximately 1.2 MHz gain-bandwidth performance with a 3 mV offset rating. It is a practical option when supply headroom is more important than low-voltage rail-to-rail operation or micropower consumption. A modern low-voltage amplifier may be preferable in battery-powered systems where the LM358BIDR's supply requirements would be excessive.
Is LM358BIDR suitable for sensor signal conditioning?
Yes, the LM358BIDR is suitable for many sensor signal-conditioning stages because it provides two general-purpose amplifier channels, 1.2 MHz gain-bandwidth performance, and a 36 V maximum supply rating. It can implement non-inverting or inverting gain stages around a sensor bridge, transducer, or low-level analog signal. The input common-mode range, output swing, offset behavior, noise, and stability with the actual sensor impedance must remain inside the limits stated in the Texas Instruments manufacturer datasheet.
Where can I buy LM358BIDR online?
Use the Request a Quote form on this page to inquire about LM358BIDR availability, current pricing, minimum order quantity, and lead time. The exact LM358BIDR ordering information should be confirmed for the required reel, tray, or tube configuration, and the manufacturer lifecycle status should be reviewed before placing a production order. The Request a Quote workflow provides a direct route for current commercial data without relying on a static price.
What is the lead time for LM358BIDR?
The current lead time for LM358BIDR should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, assembly packaging, production schedule, and regional inventory position. When requesting a quotation, state the required quantity and packaging format so the supplier can identify the exact LM358BIDR ordering configuration. For safety-critical or long-lead production programs, request a schedule commitment rather than relying on a historical availability statement.
Is LM358BIDR in stock?
Current stock for LM358BIDR should be confirmed through the Request a Quote form on this page. The part is currently presented as an active Texas Instruments product and is listed by multiple distributors, but availability can change by package format, order quantity, and fulfillment schedule. Include your required quantity, target date, and preferred packaging in the request. For prototype demand, also consider whether an authorized alternate purchasing channel can support the same exact MPN.
What are the main design limitations of LM358BIDR?
The main design checks are input common-mode range, output voltage swing, output-current capability, stability with the chosen load, and allowable supply voltage. The LM358BIDR has a 36 V maximum supply rating and 1.2 MHz gain-bandwidth product, but those headline values do not guarantee full-range input or output operation. Review the absolute maximum and recommended operating conditions in the Texas Instruments manufacturer datasheet, then verify the feedback network and load with a circuit simulation before fabrication.
How should LM358BIDR be decoupled on a PCB?
Place the supply bypass capacitor close to the positive supply and ground pins, and connect the feedback resistors directly to the associated input and output pins to minimize parasitic pickup. The Texas Instruments manufacturer datasheet should be used to select the recommended capacitance and determine whether additional bypassing is required. Keep the layout compact enough to preserve feedback-loop stability, route sensitive inputs away from switching nodes, and provide a low-impedance ground return for both amplifier channels.
Can LM358BIDR be used with a 24V industrial supply?
The LM358BIDR's 36 V maximum supply rating makes it a candidate for a regulated 24 V industrial rail, provided the actual supply tolerance and transients remain below the absolute maximum limit. The amplifier's input common-mode range and output swing may still restrict usable signal levels even when the supply itself is acceptable. According to the Texas Instruments manufacturer datasheet, confirm the recommended supply range, rail-to-rail behavior, transient margin, and thermal conditions for the installed enclosure.
What is the best cross-brand equivalent for LM358BIDR?
The best cross-brand equivalent is the dual amplifier that matches the LM358BIDR's 8-pin SOIC footprint, pin functions, 36 V-class supply capability, 1.2 MHz-class bandwidth, and required common-mode and output limits. Cross-reference guides list several comparable dual-amplifier families, but a candidate should not be approved from the family name alone. Review the candidate manufacturer's absolute maximum ratings, electrical characteristics, package drawing, and qualification status before approving a substitution.

Справочные инженерные данные для LM358BIDR — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the LM358BIDR for a new surface-mount design that specifically requires the established LM358B family, two general-purpose amplifier channels, an 8-SOIC footprint, a 36 V maximum supply rating, and 1.2 MHz gain-bandwidth performance. It is well suited to industrial sensor conditioning, general buffering, active filtering, and comparator-style control circuits. Select LM358BAIDR when its specific temperature-grade or qualification attributes are required and its electrical data remain acceptable. Evaluate LM2902NSR, LM2902VDG, LM2902KNS, or LM2902DTB when the project can benefit from another dual-amplifier family and the candidate's common-mode range, output swing, offset, bandwidth, noise, temperature grade, and stability characteristics satisfy the design. For battery-powered or very low-voltage products, choose a rail-to-rail, low-voltage amplifier instead. For any substitution, verify the package drawing, complete pin map, absolute maximum ratings, and recommended operating conditions rather than relying only on the dual-amplifier description.

Сравнение с аналогами

Параметр Этот товар LM358BAIDR LM2902NSR LM2902VDG LM2902KNS LM2902DTB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Number of Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Mounting Style Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Ключевые отличия

  • Established LM358B dual-amplifier identity (против LM358BAIDR)
  • Two general-purpose channels in an 8-SOIC package (против LM2902NSR)
  • Single-package channel consolidation (против LM2902VDG)
  • 36 V maximum supply rating (против LM2902KNS)

Заметки по проектированию

Place the local supply bypass capacitor adjacent to pins 8 and 4, and terminate the ground side through a low-impedance plane connection. Route pins 2, 3, 5, and 6 away from switching nodes and other high-current paths. Keep the feedback components close to their associated output and input pins so that parasitic capacitance does not degrade the intended closed-loop response or stability.

The LM358BIDR provides 1.2 MHz gain-bandwidth performance, so calculate the required closed-loop bandwidth against the actual noise gain rather than assuming the gain-bandwidth value is a complete bandwidth specification. Include amplifier input capacitance, source impedance, load capacitance, and feedback-component tolerances in the stability analysis. Simulate the final circuit when driving unusually high impedance, capacitive, or long external cables.

Do not equate the 36 V maximum supply rating with permission to operate every amplifier input at 36 V. The input common-mode range and output swing can be narrower than the supply limits. Confirm those boundaries in the Texas Instruments manufacturer datasheet, check tolerances on the actual power rail, and ensure external transients do not exceed the absolute maximum rating. This is particularly important in 24 V industrial systems.

Although the 8-SOIC package can dissipate heat effectively in many general-purpose analog applications, estimate the actual internal dissipation from the supply voltage, output voltage, load current, and quiescent current. Provide adequate copper around the package and avoid placing the device beside a heat source when the ambient temperature is high. Use the manufacturer thermal information for a board-specific junction-temperature calculation.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance attributes were not explicitly stated for the exact LM358BIDR ordering code. Review the manufacturer product page and current material-compliance declarations for the production configuration.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

lm358bidr datasheet LM358BIDR datasheet PDF LM358BIDR pinout LM358BIDR SOIC-8 footprint LM358BIDR 36V 1.2MHz LM358BIDR 3mV offset LM358BIDR drop-in replacement LM358BIDR vs LM2902NSR LM358BIDR price LM358BIDR stock Texas Instruments LM358BIDR LM358BIDR sensor signal conditioning LM358BIDR active filter design LM358BIDR pin configuration

Связанные компоненты & термины

Texas Instruments LM358BIDR LM358BAIDR LM2902NSR LM2902VDG LM2902KNS LM2902DTB LM358 LM2902 Operational Amplifier Dual Operational Amplifier General-Purpose Amplifier Analog Amplifier Integrated Circuit Semiconductor 8-SOIC SOIC package family Surface Mount SMD Gain-Bandwidth Product Output Offset Voltage Input Common-Mode Range Voltage Comparator Sensor Signal Conditioning Active Filter
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ