LM358BIDR - Dual 36V 1.2MHz Op Amp | Texas Instruments
MPN: LM358BIDR ✓ فعالLM358BIDR جائزہ
An operational amplifier is a high-gain analog building block that compares an input signal with a feedback network and drives its output toward the difference between those signals. The dual-amplifier hierarchy connects the LM358BIDR to operational amplifiers, analog amplifiers, linear amplifiers, and integrated circuits. Two independent channels in one package reduce board area while providing a common supply arrangement for industrial controls, instrumentation, sensor interfaces, and general-purpose embedded systems.
Key characteristics include two amplifier circuits, a 36 V maximum supply voltage, a 1.2 MHz gain-bandwidth product, and a 3 mV offset voltage. The 8-SOIC format supports automated surface-mount assembly and standard 1.27 mm pitch PCB layouts. Because the part is intended for broad analog applications, its useful performance depends on the selected feedback network, supply voltage, output load, input common-mode range, and required accuracy.
The LM358BIDR belongs to the LM358B family of industry-standard dual operational amplifiers. Its internally compensated architecture simplifies typical closed-loop amplifier and voltage-follower configurations. Designers should still verify input and output operating limits for the intended supply and signal ranges in the manufacturer datasheet, particularly when approaching the device's maximum rated supply voltage.
Typical applications include sensor signal conditioning, transducer amplification, analog filtering, comparator-style control loops, current-voltage conversion, audio preamplification, and general industrial signal conditioning. The dual-channel arrangement is particularly useful when a board needs two related analog channels without requiring a quad-amplifier package or two separate single-channel devices.
For PCB implementation, place input, output, feedback, and decoupling connections to minimize parasitic coupling and preserve signal integrity. Keep sensitive input traces away from high-current switching paths, use a local supply bypass capacitor, and route the ground return carefully to reduce offset and noise pickup. Confirm output-current capability and stability with the selected load before committing to the design.
This page organizes the exact LM358BIDR identity, package information, sourcing fields, replacement considerations, and application guidance into a practical engineering reference. It also distinguishes verified target-part characteristics from comparison fields that require an individual manufacturer datasheet review before a board redesign is approved.
کے لیے ڈراپ اِن متبادل LM358BIDR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM358BIDR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Amplifier Type, Maximum Supply Voltage, Gain-Bandwidth Product, Supply Voltage Range.
LM358BAIDR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2902NSR
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2902VDG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2902KNS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2902DTB
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM358BIDR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Number of Amplifier Channels | 2 channels |
| Product Type | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | 36 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Output Offset Voltage | 3 mV |
| پیکیج | 8-pin SOIC |
| Package Pin Count | 8 pins |
| ماؤنٹنگ اسٹائل | Surface mount |
| Amplifier Type | Standard general-purpose amplifier |
| Number of Circuits | 2 circuits |
LM358BIDR پن کنفیگریشن
| پن 1 | OUT1 — Amplifier 1 output |
| پن 2 | IN1- — Amplifier 1 inverting input |
| پن 3 | IN1+ — Amplifier 1 non-inverting input |
| پن 4 | V- — Negative supply or ground connection |
| پن 5 | IN2+ — Amplifier 2 non-inverting input |
| پن 6 | IN2- — Amplifier 2 inverting input |
| پن 7 | OUT2 — Amplifier 2 output |
| پن 8 | V+ — Positive supply connection |
عام استعمالات
LM358BIDR کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Transducer and Current-to-Voltage Conversion, Analog Active Filtering, Audio Preamplification and Buffering, Threshold Monitoring and Control Loops, Power-Supply Feedback and Monitoring.
Industrial Sensor Signal Conditioning
The LM358BIDR is well suited to amplifying weak sensor signals because it provides two general-purpose amplifier channels, 1.2 MHz gain-bandwidth performance, and a 36 V maximum supply rating. One channel can provide gain around a bridge, resistive sensor, or low-level transducer, while the second channel can buffer the result or form a comparator for threshold control. The 8-SOIC package simplifies replacement of a through-hole LM358 layout. Verify the input common-mode range, output swing, and noise requirements against the Texas Instruments manufacturer datasheet before selecting the gain and feedback values.
تجویز کردہ
Transducer and Current-to-Voltage Conversion
For current sensing, the LM358BIDR can form the transimpedance stage that converts a small current into a measurable voltage. Its 1.2 MHz gain-bandwidth product supports practical signal bandwidth for many industrial and instrumentation channels, while the two channels allow one amplifier to perform conversion and the other to provide filtering or gain. A 36 V maximum supply rating also provides useful headroom for industrial rails. The design must account for feedback capacitance, sensor capacitance, input bias current, output loading, and the amplifier's specified common-mode range.
تجویز کردہ
Analog Active Filtering
The LM358BIDR can implement first- and higher-order analog filters where a discrete general-purpose dual amplifier is preferred. Two channels in an 8-SOIC package allow a Sallen-Key stage and buffer in one component, or two cascaded filter sections in a shared layout. Its 1.2 MHz gain-bandwidth product places an upper limit on the practical closed-loop bandwidth and component matching requirements, so resistor and capacitor tolerances should be evaluated together with the closed-loop noise gain. Keep the feedback network compact and validate the final response for stability and output swing.
تجویز کردہ
Audio Preamplification and Buffering
The LM358BIDR can serve as a two-channel audio preamplifier or line-level buffer in general-purpose audio modules. Its dual-channel structure avoids separate single-amplifier packages for stereo routing, and the 1.2 MHz gain-bandwidth product is suitable for many non-critical audio-control paths. Because this is a general-purpose amplifier rather than a specified low-noise audio device, the noise and distortion characteristics should be reviewed before using it in a high-fidelity signal chain. Add input filtering and maintain conservative closed-loop gain to avoid clipping the available output swing.
تجویز کردہ
Threshold Monitoring and Control Loops
A practical comparator-style application uses one LM358BIDR channel to compare a sensor voltage with a reference and the second channel for gain or filtering, creating a hysteretic monitoring and control function. The 36 V maximum supply rating accommodates many control-system rails, while the 8-SOIC format supports compact surface-mount assemblies. The comparator must remain inside the input common-mode range, and the output must remain within the specified swing and load limits. Add positive feedback for hysteresis where appropriate and place the reference network close to the relevant input pins.
تجویز کردہ
Power-Supply Feedback and Monitoring
The LM358BIDR can monitor a power rail or participate in a feedback-control loop around a power-conversion stage. One channel may amplify a divided output-voltage sample, while the other can compare that sample with a reference and provide an error or control signal. The device's 36 V maximum supply rating is relevant when the electronics operate from a higher-voltage rail, but the input common-mode range still determines how much of the monitored output can safely be divided and presented to the amplifier. Isolate the high-voltage node and provide suitable resistor ratings and filtering.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM358BIDR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LM358BAIDR | LM2902NSR | LM2902VDG | LM2902KNS | LM2902DTB |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Mounting Style | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
اہم امتیازی خصوصیات
- Established LM358B dual-amplifier identity (بمقابلہLM358BAIDR)
- Two general-purpose channels in an 8-SOIC package (بمقابلہLM2902NSR)
- Single-package channel consolidation (بمقابلہLM2902VDG)
- 36 V maximum supply rating (بمقابلہLM2902KNS)
ڈیزائن نوٹس
Place the local supply bypass capacitor adjacent to pins 8 and 4, and terminate the ground side through a low-impedance plane connection. Route pins 2, 3, 5, and 6 away from switching nodes and other high-current paths. Keep the feedback components close to their associated output and input pins so that parasitic capacitance does not degrade the intended closed-loop response or stability.
The LM358BIDR provides 1.2 MHz gain-bandwidth performance, so calculate the required closed-loop bandwidth against the actual noise gain rather than assuming the gain-bandwidth value is a complete bandwidth specification. Include amplifier input capacitance, source impedance, load capacitance, and feedback-component tolerances in the stability analysis. Simulate the final circuit when driving unusually high impedance, capacitive, or long external cables.
Do not equate the 36 V maximum supply rating with permission to operate every amplifier input at 36 V. The input common-mode range and output swing can be narrower than the supply limits. Confirm those boundaries in the Texas Instruments manufacturer datasheet, check tolerances on the actual power rail, and ensure external transients do not exceed the absolute maximum rating. This is particularly important in 24 V industrial systems.
Although the 8-SOIC package can dissipate heat effectively in many general-purpose analog applications, estimate the actual internal dissipation from the supply voltage, output voltage, load current, and quiescent current. Provide adequate copper around the package and avoid placing the device beside a heat source when the ambient temperature is high. Use the manufacturer thermal information for a board-specific junction-temperature calculation.
تعمیل کی معلومات
Compliance attributes were not explicitly stated for the exact LM358BIDR ordering code. Review the manufacturer product page and current material-compliance declarations for the production configuration.