LM358YPT - Dual 1.1MHz Low-Power Op Amp | STMicroelectronics
Артикул: LM358YPT ✓ АктивенLM358YPT Обзор
An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. The LM358 belongs to the broader operational amplifier and amplifier IC hierarchy, where it occupies a general-purpose, low-power position rather than a precision or high-speed niche. Two independent amplifiers can process separate signals or be connected together for differential, gain, filtering, or feedback configurations, reducing component count and simplifying dual-signal analog front ends.
The principal operating characteristics include a 1.1 MHz gain-bandwidth product, a maximum offset voltage of 9 mV, two amplifier circuits, and an 8-TSSOP package. The low-power description makes the device relevant to battery-operated and low-voltage equipment, while its dual organization improves PCB utilization when both channels are required. RoHS compliance supports use in electronic assemblies whose material restrictions are part of the manufacturing process.
As a general-purpose amplifier, the LM358YPT is designed for conventional closed-loop analog applications rather than demanding precision, high-speed, or high-accuracy measurement channels. Designers should use the manufacturer datasheet for the complete electrical limits, input common-mode range, output swing, supply-current limits, compensation details, and recommended operating conditions. Those characteristics determine whether the amplifier maintains useful output swing and linear operation at the selected supply voltage.
Typical uses include conditioning resistive sensor signals, buffering higher-impedance circuit nodes, amplifying low-frequency communications signals, implementing active filters, and building dual-channel control or monitoring circuits. In each case, the 1.1 MHz bandwidth provides a practical ceiling for low-frequency gain and closed-loop response, while the offset specification must be considered when signal accuracy matters.
A key design consideration is input and output stability around the selected supply rails. Place bypass capacitance near the supply pins, route feedback components to minimize parasitic coupling, and confirm that the required output voltage remains inside the operating limits. The compact TSSOP package also requires careful assembly practices because its lead pitch limits soldering access.
This page combines the exact LM358YPT package and headline electrical characteristics with engineering-focused application guidance, drop-in comparison candidates, PCB considerations, and sourcing information. These details help engineers determine whether the device fits a general-purpose analog design before committing it to a production BOM.
Аналоги без доработки для LM358YPT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LM358YPT (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Gain-Bandwidth Product.
LM358APT
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →LM358YDT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LM358APWR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LM358PWRG3
✅ Прямая заменаУточнить цену
Открыть даташит →LM358PWRG3
✅ Прямая заменаУточнить цену
Открыть даташит →LM358YPT Максимальные параметры и электрические характеристики
| Amplifier Type | Low-power dual operational amplifier |
| Number of Amplifier Channels | 2 circuits |
| Gain-Bandwidth Product | 1.1 MHz |
| Maximum Input Offset Voltage | 9 mV |
| Package Type | TSSOP-8 |
| Package Designation | PDSO8 |
| Тип монтажа | Surface mount |
| Статус RoHS | Compliant |
Руководство по цоколевке LM358YPT в корпусе pdso8
Цоколевка для LM358YPT (корпус pdso8). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для LM358YPT.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LM358YPT подходит для 6 применениеs: Resistive Sensor Signal Conditioning, Industrial Active Filtering, Audio Preamplifier Buffering, Communications Signal Conditioning, Battery-Powered Monitoring, Power-Supply Feedback and Monitoring.
Resistive Sensor Signal Conditioning
The LM358YPT fits resistive sensor conditioning because its two channels can provide excitation buffering and output amplification within one 8-TSSOP package. The 1.1 MHz gain-bandwidth product is more than adequate for common temperature, pressure, and position sensing signals, while the maximum input offset voltage of 9 mV defines the nominal DC-error boundary. Place the sensor and feedback network close to the amplifier pins to minimize parasitic pickup. Verify that the sensor excitation and amplifier output remain inside the manufacturer’s input and output limits. For bridge sensors, calculate the maximum offset contribution after circuit gain and include trimming or calibration when the required measurement resolution is tighter than the nominal 9 mV input-offset limit.
Рекомендуется
Industrial Active Filtering
The LM358YPT can implement active low-pass, high-pass, and notch stages where a 1.1 MHz gain-bandwidth product provides ample closed-loop bandwidth relative to low-frequency industrial signals. Its two channels support a two-stage filter or allow a second amplifier to drive another filter section. The dual package reduces board area, but TSSOP-8 requires careful soldering and component spacing. Select resistor and capacitor values against the desired cutoff and closed-loop gain, then confirm stability using the gain-bandwidth and phase-margin information in the STMicroelectronics datasheet. Add supply bypass capacitance close to the device and keep sensitive feedback nodes away from switching and digital return paths.
Рекомендуется
Audio Preamplifier Buffering
The LM358YPT is appropriate for modest low-frequency audio preamplification or impedance buffering because its 1.1 MHz bandwidth exceeds the bandwidth required by most audio control paths. Two channels can amplify a stereo pair or form the two sides of a balanced signal chain. The maximum offset voltage of 9 mV can contribute to DC headroom consumption and signal clipping in low-voltage audio paths, so the output bias and coupling arrangement should be evaluated. Confirm the output swing at the chosen supply voltage. For applications requiring very low distortion, high output current, rail-to-rail output, or substantially lower offset, select a more appropriate audio amplifier rather than assuming the general-purpose LM358 performance is sufficient.
Рекомендуется
Communications Signal Conditioning
The LM358YPT can condition low-frequency communications and control signals when the signal bandwidth is well below the device’s 1.1 MHz gain-bandwidth product. The dual arrangement supports separate transmit or receive monitoring channels, or one channel can amplify while the other buffers a reference. Designers should check the input common-mode range and output swing because the usable linear region depends on the selected single or dual supply. Stable feedback resistor placement and short ground returns are especially important in systems containing switching regulators and digital clock edges. The 9 mV maximum input offset is also relevant when the conditioned signal represents a precision current or control reference rather than a broad-band waveform.
Рекомендуется
Battery-Powered Monitoring
The low-power dual operational amplifier architecture of the LM358YPT makes it suitable for battery-operated monitoring systems that need two buffered channels without allocating two separate packages. It can support threshold detection, current or voltage monitoring, and low-frequency sensor interfaces while operating from a compact mixed-signal board. The exact supply-current and common-mode limits must be checked against the battery operating range, because those parameters are not established by the catalog summary alone. Avoid placing the input signals outside the amplifier’s allowed range during battery transients. Use the exposed land area and copper routing to improve heat transfer if either channel operates continuously near its output-current limit, and verify the final battery lifetime using the manufacturer’s recommended operating conditions.
Рекомендуется
Power-Supply Feedback and Monitoring
The LM358YPT can form a low-frequency feedback or supervisory amplifier in power-management circuitry, provided the monitored voltage falls within the amplifier’s permitted input range. Two channels may compare a scaled supply rail against a reference or monitor input and output rails independently. Its 1.1 MHz bandwidth is ample for slow regulation loops and monitoring functions, but the 9 mV nominal maximum offset can affect threshold accuracy after gain. Account for input bias, resistor errors, and temperature drift in the error budget. Keep the amplifier away from high-dV/dt switching nodes, use Kelvin routing for sensitive feedback connections, and confirm that fault conditions cannot drive an input beyond the absolute maximum rating.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LM358YPT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LM358APT | LM358YDT | LM358APWR | LM358PWR |
|---|---|---|---|---|---|
| Package | TSSOP-8 | TSSOP-8 | TSSOP-8 | TSSOP-8 | TSSOP-8 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | Texas Instruments |
| Amplifier Channels | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Gain-Bandwidth Product | 1.1 MHz | 1.1 MHz | 1.1 MHz | 1.1 MHz | 1.1 MHz |
| Maximum Input Offset Voltage | 9 mV | 9 mV | 9 mV | 9 mV | 9 mV |
| Amplifier Type | Low-power dual operational amplifier | Low-power dual operational amplifier | Low-power dual operational amplifier | General-purpose dual operational amplifier | General-purpose dual operational amplifier |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Ключевые отличия
- Two low-power amplifiers in one compact package (против LM358APWR)
- STMicroelectronics ordering option for dual-channel analog designs (против LM358PWR)
- Matched nominal signal performance across LM358-family choices (против LM358APT)
Заметки по проектированию
Place input bypass capacitance and output decoupling directly beside the LM358YPT supply pins. Keep feedback resistors and their associated capacitors on the same side of the TSSOP-8 footprint, with the amplifier output routed away from the input and reference nodes. The 0.65 mm lead pitch limits assembly access, so reserve solderable clearance for the leads and avoid placing tall components beside the package.
Do not assume that a generic LM358 pin diagram applies without checking the exact STMicroelectronics package drawing. In a dual amplifier, an incorrect channel mapping can connect both feedback networks to one output and damage the device. Verify pin numbers, supply connections, and exposed-pad requirements against the LM358YPT datasheet before releasing artwork. Also confirm that input signals remain inside the permitted common-mode range during startup and fault conditions.
The 1.1 MHz gain-bandwidth product makes the LM358YPT appropriate mainly for low-frequency closed-loop operation. At higher closed-loop gain, usable bandwidth decreases, and excessive loop gain or poorly placed compensation components can reduce stability. Keep feedback loops compact, avoid long signal traces, and validate the final component values and board layout with an oscilloscope or network analysis before production.
Estimated: with a 12 V input, 5 V output, and 1 mA load, the LM358YPT dissipates approximately (12 V - 5 V) × 1 mA = 7 mW, excluding internal bias and output-current effects. Because the package is compact, use its exposed thermal land when required by the package drawing and avoid placing the device beside a heat source. Obtain the actual maximum supply, output-current, and thermal limits from the manufacturer datasheet.
Информация о соответствии
The LM358YPT product listing identifies the device as RoHS compliant. No REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification claim is established for this exact ordering code.