LM358YPT - Dual 1.1MHz Low-Power Op Amp | STMicroelectronics
MPN: LM358YPT ✓ 啟用中LM358YPT 概覽
An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. The LM358 belongs to the broader operational amplifier and amplifier IC hierarchy, where it occupies a general-purpose, low-power position rather than a precision or high-speed niche. Two independent amplifiers can process separate signals or be connected together for differential, gain, filtering, or feedback configurations, reducing component count and simplifying dual-signal analog front ends.
The principal operating characteristics include a 1.1 MHz gain-bandwidth product, a maximum offset voltage of 9 mV, two amplifier circuits, and an 8-TSSOP package. The low-power description makes the device relevant to battery-operated and low-voltage equipment, while its dual organization improves PCB utilization when both channels are required. RoHS compliance supports use in electronic assemblies whose material restrictions are part of the manufacturing process.
As a general-purpose amplifier, the LM358YPT is designed for conventional closed-loop analog applications rather than demanding precision, high-speed, or high-accuracy measurement channels. Designers should use the manufacturer datasheet for the complete electrical limits, input common-mode range, output swing, supply-current limits, compensation details, and recommended operating conditions. Those characteristics determine whether the amplifier maintains useful output swing and linear operation at the selected supply voltage.
Typical uses include conditioning resistive sensor signals, buffering higher-impedance circuit nodes, amplifying low-frequency communications signals, implementing active filters, and building dual-channel control or monitoring circuits. In each case, the 1.1 MHz bandwidth provides a practical ceiling for low-frequency gain and closed-loop response, while the offset specification must be considered when signal accuracy matters.
A key design consideration is input and output stability around the selected supply rails. Place bypass capacitance near the supply pins, route feedback components to minimize parasitic coupling, and confirm that the required output voltage remains inside the operating limits. The compact TSSOP package also requires careful assembly practices because its lead pitch limits soldering access.
This page combines the exact LM358YPT package and headline electrical characteristics with engineering-focused application guidance, drop-in comparison candidates, PCB considerations, and sourcing information. These details help engineers determine whether the device fits a general-purpose analog design before committing it to a production BOM.
直接替換替代品,適用於 LM358YPT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM358YPT (相同外形與佔位) — 差異在於 Amplifier Type, Gain-Bandwidth Product.
LM358APT
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LM358YDT
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LM358APWR
✅ 直接替換📋 參考替代品(不在目錄中)
LM358PWRG3
✅ 直接替換聯絡詢價
查看資料表 →LM358PWRG3
✅ 直接替換聯絡詢價
查看資料表 →LM358YPT 最大額定值與電氣特性
| Amplifier Type | Low-power dual operational amplifier |
| Number of Amplifier Channels | 2 circuits |
| Gain-Bandwidth Product | 1.1 MHz |
| Maximum Input Offset Voltage | 9 mV |
| Package Type | TSSOP-8 |
| Package Designation | PDSO8 |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
LM358YPT pdso8 腳位配置指南
LM358YPT(pdso8 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM358YPT.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM358YPT 適用於 6 應用s: Resistive Sensor Signal Conditioning, Industrial Active Filtering, Audio Preamplifier Buffering, Communications Signal Conditioning, Battery-Powered Monitoring, Power-Supply Feedback and Monitoring.
Resistive Sensor Signal Conditioning
The LM358YPT fits resistive sensor conditioning because its two channels can provide excitation buffering and output amplification within one 8-TSSOP package. The 1.1 MHz gain-bandwidth product is more than adequate for common temperature, pressure, and position sensing signals, while the maximum input offset voltage of 9 mV defines the nominal DC-error boundary. Place the sensor and feedback network close to the amplifier pins to minimize parasitic pickup. Verify that the sensor excitation and amplifier output remain inside the manufacturer’s input and output limits. For bridge sensors, calculate the maximum offset contribution after circuit gain and include trimming or calibration when the required measurement resolution is tighter than the nominal 9 mV input-offset limit.
推薦
Industrial Active Filtering
The LM358YPT can implement active low-pass, high-pass, and notch stages where a 1.1 MHz gain-bandwidth product provides ample closed-loop bandwidth relative to low-frequency industrial signals. Its two channels support a two-stage filter or allow a second amplifier to drive another filter section. The dual package reduces board area, but TSSOP-8 requires careful soldering and component spacing. Select resistor and capacitor values against the desired cutoff and closed-loop gain, then confirm stability using the gain-bandwidth and phase-margin information in the STMicroelectronics datasheet. Add supply bypass capacitance close to the device and keep sensitive feedback nodes away from switching and digital return paths.
推薦
Audio Preamplifier Buffering
The LM358YPT is appropriate for modest low-frequency audio preamplification or impedance buffering because its 1.1 MHz bandwidth exceeds the bandwidth required by most audio control paths. Two channels can amplify a stereo pair or form the two sides of a balanced signal chain. The maximum offset voltage of 9 mV can contribute to DC headroom consumption and signal clipping in low-voltage audio paths, so the output bias and coupling arrangement should be evaluated. Confirm the output swing at the chosen supply voltage. For applications requiring very low distortion, high output current, rail-to-rail output, or substantially lower offset, select a more appropriate audio amplifier rather than assuming the general-purpose LM358 performance is sufficient.
推薦
Communications Signal Conditioning
The LM358YPT can condition low-frequency communications and control signals when the signal bandwidth is well below the device’s 1.1 MHz gain-bandwidth product. The dual arrangement supports separate transmit or receive monitoring channels, or one channel can amplify while the other buffers a reference. Designers should check the input common-mode range and output swing because the usable linear region depends on the selected single or dual supply. Stable feedback resistor placement and short ground returns are especially important in systems containing switching regulators and digital clock edges. The 9 mV maximum input offset is also relevant when the conditioned signal represents a precision current or control reference rather than a broad-band waveform.
推薦
Battery-Powered Monitoring
The low-power dual operational amplifier architecture of the LM358YPT makes it suitable for battery-operated monitoring systems that need two buffered channels without allocating two separate packages. It can support threshold detection, current or voltage monitoring, and low-frequency sensor interfaces while operating from a compact mixed-signal board. The exact supply-current and common-mode limits must be checked against the battery operating range, because those parameters are not established by the catalog summary alone. Avoid placing the input signals outside the amplifier’s allowed range during battery transients. Use the exposed land area and copper routing to improve heat transfer if either channel operates continuously near its output-current limit, and verify the final battery lifetime using the manufacturer’s recommended operating conditions.
推薦
Power-Supply Feedback and Monitoring
The LM358YPT can form a low-frequency feedback or supervisory amplifier in power-management circuitry, provided the monitored voltage falls within the amplifier’s permitted input range. Two channels may compare a scaled supply rail against a reference or monitor input and output rails independently. Its 1.1 MHz bandwidth is ample for slow regulation loops and monitoring functions, but the 9 mV nominal maximum offset can affect threshold accuracy after gain. Account for input bias, resistor errors, and temperature drift in the error budget. Keep the amplifier away from high-dV/dt switching nodes, use Kelvin routing for sensitive feedback connections, and confirm that fault conditions cannot drive an input beyond the absolute maximum rating.
推薦
推薦產品摘要
工程參考資料,適用於 LM358YPT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM358APT | LM358YDT | LM358APWR | LM358PWR |
|---|---|---|---|---|---|
| Package | TSSOP-8 | TSSOP-8 | TSSOP-8 | TSSOP-8 | TSSOP-8 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | Texas Instruments |
| Amplifier Channels | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Gain-Bandwidth Product | 1.1 MHz | 1.1 MHz | 1.1 MHz | 1.1 MHz | 1.1 MHz |
| Maximum Input Offset Voltage | 9 mV | 9 mV | 9 mV | 9 mV | 9 mV |
| Amplifier Type | Low-power dual operational amplifier | Low-power dual operational amplifier | Low-power dual operational amplifier | General-purpose dual operational amplifier | General-purpose dual operational amplifier |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Two low-power amplifiers in one compact package (對比LM358APWR)
- STMicroelectronics ordering option for dual-channel analog designs (對比LM358PWR)
- Matched nominal signal performance across LM358-family choices (對比LM358APT)
設計說明
Place input bypass capacitance and output decoupling directly beside the LM358YPT supply pins. Keep feedback resistors and their associated capacitors on the same side of the TSSOP-8 footprint, with the amplifier output routed away from the input and reference nodes. The 0.65 mm lead pitch limits assembly access, so reserve solderable clearance for the leads and avoid placing tall components beside the package.
Do not assume that a generic LM358 pin diagram applies without checking the exact STMicroelectronics package drawing. In a dual amplifier, an incorrect channel mapping can connect both feedback networks to one output and damage the device. Verify pin numbers, supply connections, and exposed-pad requirements against the LM358YPT datasheet before releasing artwork. Also confirm that input signals remain inside the permitted common-mode range during startup and fault conditions.
The 1.1 MHz gain-bandwidth product makes the LM358YPT appropriate mainly for low-frequency closed-loop operation. At higher closed-loop gain, usable bandwidth decreases, and excessive loop gain or poorly placed compensation components can reduce stability. Keep feedback loops compact, avoid long signal traces, and validate the final component values and board layout with an oscilloscope or network analysis before production.
Estimated: with a 12 V input, 5 V output, and 1 mA load, the LM358YPT dissipates approximately (12 V - 5 V) × 1 mA = 7 mW, excluding internal bias and output-current effects. Because the package is compact, use its exposed thermal land when required by the package drawing and avoid placing the device beside a heat source. Obtain the actual maximum supply, output-current, and thermal limits from the manufacturer datasheet.
合規資訊
The LM358YPT product listing identifies the device as RoHS compliant. No REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification claim is established for this exact ordering code.