STMicroelectronics

LM358YPT - Dual 1.1MHz Low-Power Op Amp | STMicroelectronics

MPN: LM358YPT ✓ פעיל
9 mV Vdss TSSOP-8 Package
כמות הזמנה מינימלית: 1 |

LM358YPT סקירה

The STMicroelectronics LM358YPT is a low-power dual operational amplifier packaged in an 8-pin TSSOP. It provides two independent amplifier channels, a 1.1 MHz gain-bandwidth product, and a maximum input offset voltage of 9 mV. The device is identified as a standard general-purpose amplifier and is listed as RoHS compliant. Its dual-channel architecture makes it suitable for signal conditioning, sensor amplification, filtering, and other low-frequency analog circuits that require two amplifiers in one package.

An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. The LM358 belongs to the broader operational amplifier and amplifier IC hierarchy, where it occupies a general-purpose, low-power position rather than a precision or high-speed niche. Two independent amplifiers can process separate signals or be connected together for differential, gain, filtering, or feedback configurations, reducing component count and simplifying dual-signal analog front ends.

The principal operating characteristics include a 1.1 MHz gain-bandwidth product, a maximum offset voltage of 9 mV, two amplifier circuits, and an 8-TSSOP package. The low-power description makes the device relevant to battery-operated and low-voltage equipment, while its dual organization improves PCB utilization when both channels are required. RoHS compliance supports use in electronic assemblies whose material restrictions are part of the manufacturing process.

As a general-purpose amplifier, the LM358YPT is designed for conventional closed-loop analog applications rather than demanding precision, high-speed, or high-accuracy measurement channels. Designers should use the manufacturer datasheet for the complete electrical limits, input common-mode range, output swing, supply-current limits, compensation details, and recommended operating conditions. Those characteristics determine whether the amplifier maintains useful output swing and linear operation at the selected supply voltage.

Typical uses include conditioning resistive sensor signals, buffering higher-impedance circuit nodes, amplifying low-frequency communications signals, implementing active filters, and building dual-channel control or monitoring circuits. In each case, the 1.1 MHz bandwidth provides a practical ceiling for low-frequency gain and closed-loop response, while the offset specification must be considered when signal accuracy matters.

A key design consideration is input and output stability around the selected supply rails. Place bypass capacitance near the supply pins, route feedback components to minimize parasitic coupling, and confirm that the required output voltage remains inside the operating limits. The compact TSSOP package also requires careful assembly practices because its lead pitch limits soldering access.

This page combines the exact LM358YPT package and headline electrical characteristics with engineering-focused application guidance, drop-in comparison candidates, PCB considerations, and sourcing information. These details help engineers determine whether the device fits a general-purpose analog design before committing it to a production BOM.

חלופות תחליף ישיר עבור LM358YPT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM358YPT (אותו גורם צורה וטביעת רגל) — שונים ב Amplifier Type, Gain-Bandwidth Product.

Texas Instruments
Amplifier Type: General Purpose
Gain-Bandwidth Product: 700 kHz
השווה עם LM358YPT →

LM358APT

✅ Drop-In ⚠️ מפרטים לא מאומתים
STMicroelectronics
📦 TSSOP-8
Standard general-purpose operational amplifier · 2 channels · 2 circuits · 8-TSSOP · Surface mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM358YDT

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 TSSOP-8
Same dual 1.1 MHz LM358-family architecture and 8-TSSOP footprint; ordering-code temperature or marking details require verification, with nominal bandwidth difference of 0 MHz and nominal maximum-offset difference of 0 mV

📋 חלופה להתייחסות (לא בקטלוג)

LM358APWR

✅ Drop-In
📦 TSSOP-8
Same dual general-purpose LM358 architecture, 1.1 MHz bandwidth, and 9 mV nominal maximum offset in 8-TSSOP; temperature-grade details require verification

📋 חלופה להתייחסות (לא בקטלוג)

LM358PWRG3

✅ Drop-In
Texas Instruments
📦 TSSOP-8
General Purpose · 2 circuits · 700 kHz · 16 V · 8-TSSOP · 4.40 mm · 0.173 inch · Tape and Reel (TR)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM358PWRG3

✅ Drop-In
Texas Instruments
📦 TSSOP-8
General Purpose · 2 circuits · 700 kHz · 16 V · 8-TSSOP · 4.40 mm · 0.173 inch · Tape and Reel (TR)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM358YPT דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Low-power dual operational amplifier
Number of Amplifier Channels 2 circuits
Gain-Bandwidth Product 1.1 MHz
Maximum Input Offset Voltage 9 mV
Package Type TSSOP-8
Package Designation PDSO8
סוג הרכבה Surface mount
סטטוס RoHS Compliant

מדריך תצורת פינים של LM358YPT pdso8

תצורת פינים עבור LM358YPT (מארזת pdso8). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת pdso8 עבור LM358YPT

אין נתוני פריסת פינים מפורטים עבור LM358YPT.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LM358YPT מתאים עבור 6 יישוםs: Resistive Sensor Signal Conditioning, Industrial Active Filtering, Audio Preamplifier Buffering, Communications Signal Conditioning, Battery-Powered Monitoring, Power-Supply Feedback and Monitoring.

🧩

Resistive Sensor Signal Conditioning

The LM358YPT fits resistive sensor conditioning because its two channels can provide excitation buffering and output amplification within one 8-TSSOP package. The 1.1 MHz gain-bandwidth product is more than adequate for common temperature, pressure, and position sensing signals, while the maximum input offset voltage of 9 mV defines the nominal DC-error boundary. Place the sensor and feedback network close to the amplifier pins to minimize parasitic pickup. Verify that the sensor excitation and amplifier output remain inside the manufacturer’s input and output limits. For bridge sensors, calculate the maximum offset contribution after circuit gain and include trimming or calibration when the required measurement resolution is tighter than the nominal 9 mV input-offset limit.

🏭

Industrial Active Filtering

The LM358YPT can implement active low-pass, high-pass, and notch stages where a 1.1 MHz gain-bandwidth product provides ample closed-loop bandwidth relative to low-frequency industrial signals. Its two channels support a two-stage filter or allow a second amplifier to drive another filter section. The dual package reduces board area, but TSSOP-8 requires careful soldering and component spacing. Select resistor and capacitor values against the desired cutoff and closed-loop gain, then confirm stability using the gain-bandwidth and phase-margin information in the STMicroelectronics datasheet. Add supply bypass capacitance close to the device and keep sensitive feedback nodes away from switching and digital return paths.

🎧

Audio Preamplifier Buffering

The LM358YPT is appropriate for modest low-frequency audio preamplification or impedance buffering because its 1.1 MHz bandwidth exceeds the bandwidth required by most audio control paths. Two channels can amplify a stereo pair or form the two sides of a balanced signal chain. The maximum offset voltage of 9 mV can contribute to DC headroom consumption and signal clipping in low-voltage audio paths, so the output bias and coupling arrangement should be evaluated. Confirm the output swing at the chosen supply voltage. For applications requiring very low distortion, high output current, rail-to-rail output, or substantially lower offset, select a more appropriate audio amplifier rather than assuming the general-purpose LM358 performance is sufficient.

🌐

Communications Signal Conditioning

The LM358YPT can condition low-frequency communications and control signals when the signal bandwidth is well below the device’s 1.1 MHz gain-bandwidth product. The dual arrangement supports separate transmit or receive monitoring channels, or one channel can amplify while the other buffers a reference. Designers should check the input common-mode range and output swing because the usable linear region depends on the selected single or dual supply. Stable feedback resistor placement and short ground returns are especially important in systems containing switching regulators and digital clock edges. The 9 mV maximum input offset is also relevant when the conditioned signal represents a precision current or control reference rather than a broad-band waveform.

🔋

Battery-Powered Monitoring

The low-power dual operational amplifier architecture of the LM358YPT makes it suitable for battery-operated monitoring systems that need two buffered channels without allocating two separate packages. It can support threshold detection, current or voltage monitoring, and low-frequency sensor interfaces while operating from a compact mixed-signal board. The exact supply-current and common-mode limits must be checked against the battery operating range, because those parameters are not established by the catalog summary alone. Avoid placing the input signals outside the amplifier’s allowed range during battery transients. Use the exposed land area and copper routing to improve heat transfer if either channel operates continuously near its output-current limit, and verify the final battery lifetime using the manufacturer’s recommended operating conditions.

⚡

Power-Supply Feedback and Monitoring

The LM358YPT can form a low-frequency feedback or supervisory amplifier in power-management circuitry, provided the monitored voltage falls within the amplifier’s permitted input range. Two channels may compare a scaled supply rail against a reference or monitor input and output rails independently. Its 1.1 MHz bandwidth is ample for slow regulation loops and monitoring functions, but the 9 mV nominal maximum offset can affect threshold accuracy after gain. Account for input bias, resistor errors, and temperature drift in the error budget. Keep the amplifier away from high-dV/dt switching nodes, use Kelvin routing for sensitive feedback connections, and confirm that fault conditions cannot drive an input beyond the absolute maximum rating.

What is the operating voltage range of LM358YPT?
The LM358YPT must be operated within the supply-voltage limits specified by STMicroelectronics for the LM358 family. According to the manufacturer datasheet, the device is a dual, low-power operational amplifier with two circuits, a 1.1 MHz gain-bandwidth product, and a maximum input offset voltage of 9 mV. The exact minimum and maximum supply voltages should be confirmed in the electrical-characteristics table before the part is used in a new design.
What are the key specifications of LM358YPT that engineers should know?
The LM358YPT is a low-power dual operational amplifier with two amplifier circuits, a 1.1 MHz gain-bandwidth product, and a maximum input offset voltage of 9 mV. It is packaged in an 8-pin TSSOP, identified as PDSO8, and is listed as RoHS compliant. According to the STMicroelectronics datasheet listing, these are the principal catalog characteristics; supply limits, input range, output swing, and current limits should be taken from the complete electrical-characteristics table.
Where can I download the LM358YPT datasheet PDF?
The LM358YPT datasheet PDF is available from the cited STMicroelectronics datasheet listing and the linked manufacturer-document copy on this page. The document describes the part as a low-power dual operational amplifier and provides the electrical characteristics, package information, and application guidance needed for design review. Use the PDF together with the ordering code LM358YPT so that the 8-TSSOP package and the exact YPT suffix are matched correctly.
Where can I find the LM358YPT pinout and pin diagram?
The LM358YPT uses an 8-pin TSSOP package, but a manufacturer-verified numbered pin table is not included in the available product records. Use the pin-description table and package drawing in the STMicroelectronics LM358YPT datasheet before assigning PCB tracks. For a dual op amp, confirm the two amplifier channels, supply pins, feedback connections, and any exposed-pad requirements directly from that diagram rather than relying on a generic LM358 image.
Is the LM358YPT suitable for low-frequency signal conditioning?
Yes, the LM358YPT is well suited to general-purpose low-frequency signal conditioning because it combines two amplifier channels with a 1.1 MHz gain-bandwidth product. According to the STMicroelectronics datasheet listing, the device is a low-power dual operational amplifier in 8-TSSOP. It can support sensor buffers, gain stages, active filters, and dual-signal conditioning, provided the closed-loop bandwidth, input range, output swing, and offset requirements remain acceptable.
What can replace the LM358YPT?
The LM358APT, LM358YDT, LM358APWR, and LM358PWR are pin-compatible LM358-family candidates for designs using the 8-TSSOP footprint, but the exact suffix, grade, temperature range, and production conditions must be checked before substitution. According to LM358 cross-reference documentation, several manufacturers offer pin-compatible counterparts; however, only candidates with the same pin arrangement and acceptable electrical limits should be treated as true drop-in replacements.
Is LM358YPT the same as LM358APWR?
The LM358YPT and LM358APWR are dual LM358-family operational amplifiers associated with the 8-TSSOP footprint, but their suffixes can encode different ordering, grade, or temperature information. Both are commonly described with a 1.1 MHz bandwidth and 9 mV maximum offset. According to LM358YPT and LM358APWR comparison documentation, verify the manufacturer ordering table for electrical limits, temperature range, and marking before treating one as a production replacement for the other.
LM358YPT vs LM358PWR - which is better for a new TSSOP design?
The LM358YPT is generally the appropriate choice when the STMicroelectronics 8-TSSOP ordering code and family characteristics match the design requirements; LM358PWR is the corresponding Texas Instruments catalog option to evaluate for a second-source strategy. Both belong to the dual general-purpose LM358 class with approximately 1.1 MHz bandwidth and 9 mV maximum offset. Choose based on verified supply range, temperature grade, qualification, lifecycle, and sourcing rather than bandwidth alone.
When should I choose LM358YPT over another dual LM358 alternative?
Choose LM358YPT when the design specifically requires STMicroelectronics’ LM358 family in the 8-TSSOP package and the datasheet limits satisfy the application. It is appropriate for dual low-frequency buffers, sensor interfaces, and filters where a 1.1 MHz bandwidth is sufficient. Before selecting another family member, confirm pin compatibility, supply range, temperature grade, offset limits, output swing, and documentation for the intended operating environment.
Can LM358YPT be used in a dual-stage amplifier circuit?
Yes, the LM358YPT contains two independent amplifier circuits, so each channel can form a separate gain stage. With a 1.1 MHz gain-bandwidth product, the stages are suited to low-frequency signals rather than wideband video or high-speed communications. According to the STMicroelectronics product description, the device is a low-power dual operational amplifier; confirm feedback-network stability, common-mode range, and output swing in the manufacturer datasheet.
What is the gain-bandwidth product of LM358YPT?
The LM358YPT has a gain-bandwidth product of 1.1 MHz, as stated in the STMicroelectronics LM358YPT datasheet listing. This figure relates closed-loop bandwidth to the configured noise gain: higher closed-loop gain generally leaves less usable bandwidth. The value is appropriate for low-frequency audio, sensor, filtering, and control functions, while it does not indicate high-speed video or RF performance.
How much input offset voltage does LM358YPT have?
The LM358YPT has a maximum input offset voltage of 9 mV, according to the STMicroelectronics datasheet listing. That figure is important in precision applications because the offset can appear as a DC error at the amplifier output after gain is applied. For sensor or bridge-amplifier designs, calculate the amplified error and include calibration, offset correction, or a more precise amplifier when the resulting accuracy is insufficient.
Where to buy LM358YPT online and what is its current availability?
The LM358YPT is offered for procurement through the Request a Quote form on this page, which routes the request for the exact STMicroelectronics 8-TSSOP ordering code. Current availability, production allocation, and delivery timing should be confirmed when the quote is prepared. The device is identified by distributors as a standard general-purpose dual amplifier in 8-TSSOP, but availability can change with regional and lot-level conditions.
What is the price of LM358YPT?
Use the Request a Quote form on this page for the current unit cost, volume breaks, and availability of LM358YPT. The quoted result should be tied to the exact STMicroelectronics ordering code and 8-TSSOP package, because grade, temperature, marking, and shipment quantity can affect commercial supply. A historical unit-price reference is retained for catalog context, while the quotation form supplies the actionable commercial response.
What is the lead time for LM358YPT?
The current lead time for LM358YPT should be requested through the Request a Quote form on this page. Submit the exact MPN, required quantity, package form, target date, and any approved manufacturer or grade constraints. Because the product is distributed as a standard 8-TSSOP dual amplifier, a quotation can confirm lot availability and manufacturing lead time without assuming that generic LM358 inventory will satisfy the full order.

נתוני עזר הנדסיים עבור LM358YPT — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LM358YPT for a compact, general-purpose dual analog signal-conditioning design when the STMicroelectronics 8-TSSOP ordering code is approved and 1.1 MHz bandwidth is sufficient. It is appropriate for sensor buffers, low-frequency filters, monitoring circuits, and two-channel control paths, but the nominal 9 mV maximum input offset can be significant in precision designs. LM358APT and LM358YDT are useful same-manufacturer alternatives when their ordering, temperature, marking, or lifecycle details better match the production plan. LM358APWR and LM358PWR offer a Texas Instruments sourcing path with the same nominal dual-channel, 1.1 MHz, 9 mV-class TSSOP-8 architecture. Before approving any substitution, compare supply range, input common-mode limits, output swing, output current, temperature range, electrical grade, and package pin mapping. For rail-to-rail, micropower, precision-offset, high-output-current, or high-speed requirements, choose an amplifier family designed for those specifications rather than selecting solely by the LM358 name.

השוואה עם חלופות

פרמטר מוצר זה LM358APT LM358YDT LM358APWR LM358PWR
Package TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8
Brand STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments Texas Instruments
Amplifier Channels 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Gain-Bandwidth Product 1.1 MHz 1.1 MHz 1.1 MHz 1.1 MHz 1.1 MHz
Maximum Input Offset Voltage 9 mV 9 mV 9 mV 9 mV 9 mV
Amplifier Type Low-power dual operational amplifier Low-power dual operational amplifier Low-power dual operational amplifier General-purpose dual operational amplifier General-purpose dual operational amplifier
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

מבדילים עיקריים

  • Two low-power amplifiers in one compact package (לעומתLM358APWR)
  • STMicroelectronics ordering option for dual-channel analog designs (לעומתLM358PWR)
  • Matched nominal signal performance across LM358-family choices (לעומתLM358APT)

הערות תכנון

Place input bypass capacitance and output decoupling directly beside the LM358YPT supply pins. Keep feedback resistors and their associated capacitors on the same side of the TSSOP-8 footprint, with the amplifier output routed away from the input and reference nodes. The 0.65 mm lead pitch limits assembly access, so reserve solderable clearance for the leads and avoid placing tall components beside the package.

Do not assume that a generic LM358 pin diagram applies without checking the exact STMicroelectronics package drawing. In a dual amplifier, an incorrect channel mapping can connect both feedback networks to one output and damage the device. Verify pin numbers, supply connections, and exposed-pad requirements against the LM358YPT datasheet before releasing artwork. Also confirm that input signals remain inside the permitted common-mode range during startup and fault conditions.

The 1.1 MHz gain-bandwidth product makes the LM358YPT appropriate mainly for low-frequency closed-loop operation. At higher closed-loop gain, usable bandwidth decreases, and excessive loop gain or poorly placed compensation components can reduce stability. Keep feedback loops compact, avoid long signal traces, and validate the final component values and board layout with an oscilloscope or network analysis before production.

Estimated: with a 12 V input, 5 V output, and 1 mA load, the LM358YPT dissipates approximately (12 V - 5 V) × 1 mA = 7 mW, excluding internal bias and output-current effects. Because the package is compact, use its exposed thermal land when required by the package drawing and avoid placing the device beside a heat source. Obtain the actual maximum supply, output-current, and thermal limits from the manufacturer datasheet.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The LM358YPT product listing identifies the device as RoHS compliant. No REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification claim is established for this exact ordering code.

הנתונים אומתו בתאריך: 2026-11-13 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LM358YPT LM358YPT datasheet LM358YPT pinout LM358 pinout LM358 pin diagram LM358 pins LM358 price LM358YPT TSSOP-8 LM358YPT 1.1MHz LM358YPT equivalent LM358YPT replacement LM358YPT vs LM358APWR STMicroelectronics LM358YPT LM358YPT price LM358YPT stock

רכיבים ומונחים קשורים

STMicroelectronics LM358YPT LM358 LM358APT LM358YDT LM358APWR LM358PWR dual operational amplifier low-power operational amplifier general-purpose amplifier amplifier IC analog integrated circuit semiconductor gain-bandwidth product input offset voltage common-mode voltage range output swing voltage TSSOP-8 PDSO8 QFN family surface mount RoHS sensor signal conditioning active filter audio preamplifier
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר