LMK00804BQWRGTRQ1 - 1:4 LVCMOS Clock Buffer 350MHz | TI
Артикул: LMK00804BQWRGTRQ1 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $1.95 | $1,95 |
| 10 | $1.76 | $17,60 |
| 100 | $1.45 | $145,00 |
| 500 | $1.22 | $610,00 |
| 1.000 | $1.02 | $1.020,00 |
LMK00804BQWRGTRQ1 Обзор
A clock fan-out buffer is a timing-distribution IC in the clock tree hierarchy (clock buffer -> fan-out buffer -> timing IC -> power/timing subsystem). Its role is to replicate a reference clock to multiple loads while preserving signal integrity, adding minimal jitter, and optionally translating logic levels between voltage domains. Level translation lets a 1.8V processor clock domain safely drive 3.3V peripherals or vice versa without external translators.
Key features include a 350 MHz maximum input frequency, two selectable clock inputs with glitchless enable synchronization that eliminates runt or glitch pulses when the clock-enable pin changes state, four LVCMOS outputs at independently selectable 1.5V to 3.3V levels, and automotive qualification per AEC-Q100. The B-version silicon improves additive jitter performance over the original LMK00804, making it suitable for high-performance clock distribution in automotive and industrial systems.
Architecture-wise, the device integrates an input multiplexer, a synchronized enable block, and four matched LVCMOS output drivers in a single die. Power is supplied from 1.5V to 3.3V rails, and the exposed pad of the 16-VFQFN package provides low thermal impedance and ground return for low-noise operation. Output skew is tightly matched, preserving phase alignment across distributed clock loads.
Typical applications include automotive infotainment and ADAS processor clock distribution, industrial PLC and motor-drive clock trees, and networking/telecom line-card clock fan-out where a single reference must reach SoCs, FPGAs, Ethernet PHYs, and serializers.
Design tip: decouple the VDD pins with 0.1uF ceramics placed within 2 mm of the pins and solder the exposed pad to a solid ground plane to minimize output-to-output skew and additive jitter; select the output level via the VDDO pin per load requirements.
Аналоги без доработки для LMK00804BQWRGTRQ1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
LMK00804BQWRGTR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LMK00804BQWRGTTQ1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LMK00804BWRGTRQ1
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LMK00804BQWRGTRQ1 Характеристики
| Функция | 1-to-4 LVCMOS fan-out buffer and level translator |
| Maximum Input Frequency | 350 MHz |
| Количество выходов | 4 |
| Number of Inputs | 2 (selectable) |
| Input Type | Differential or single-ended (LVCMOS/LVTTL) |
| Тип выхода | LVCMOS |
| Output Level Options | 1.5 V, 1.8 V, 2.5 V, 3.3 V |
| Supply Voltage Range | 1.5 V to 3.3 V |
| Glitchless Enable | Yes (synchronized clock enable) |
| Qualification | AEC-Q100 automotive grade |
| Корпус | 16-VFQFN exposed pad (RGTR) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +125C (automotive) |
| Статус RoHS | Compliant |
Конфигурация выводов LMK00804BQWRGTRQ1
| Контакт 1 | VDD — Core power supply, 1.5V to 3.3V |
| Контакт 2 | CLKIN0 — Clock input 0 (single-ended or differential P) |
| Контакт 3 | CLKIN0_N — Differential complement input 0 (or GND for single-ended) |
| Контакт 4 | CLKIN1 — Clock input 1 (single-ended or differential P) |
| Контакт 5 | CLKIN1_N — Differential complement input 1 |
| Контакт 6 | CLK_SEL — Input select between CLKIN0 and CLKIN1 |
| Контакт 7 | CLK_EN — Synchronized clock enable, glitchless |
| Контакт 8 | GND — Ground |
| Контакт 9 | OUT0 — LVCMOS clock output 0 |
| Контакт 10 | OUT1 — LVCMOS clock output 1 |
| Контакт 11 | OUT2 — LVCMOS clock output 2 |
| Контакт 12 | OUT3 — LVCMOS clock output 3 |
| Контакт 13 | VDDO — Output driver supply, sets output level 1.5V-3.3V |
| Контакт 14 | VDDO — Output driver supply |
| Контакт 15 | NC — No connect [DATA_NEEDED: exact pin map] |
| Контакт 16 | PAD — Exposed thermal pad, connect to GND |
Типичное применение
LMK00804BQWRGTRQ1 подходит для 6 применениеs: Automotive Infotainment Clock Distribution, ADAS Sensor Hub Clocking, Industrial PLC and Motor Drive Control Cards, Networking and Telecom Line Cards, Test and Measurement Instrument Timing, Server and Storage Backplane Clock Fan-out.
Automotive Infotainment Clock Distribution
The LMK00804BQWRGTRQ1 distributes a single oscillator reference to SoCs, audio codecs, and display serializers in automotive infotainment head units. Its AEC-Q100 qualification and -40C to +125C range satisfy automotive environmental requirements, while the B-version die minimizes additive jitter so audio and video clocks remain clean. The glitchless synchronized enable lets the system gate clocks safely during power-mode transitions, and VDDO-based level translation bridges 1.8V processor domains to 3.3V peripheral rails up to 350 MHz without external translators.
Рекомендуется
ADAS Sensor Hub Clocking
In ADAS domains, radar, camera, and lidar subsystems need phase-coherent clocks from one reference. The LMK00804BQWRGTRQ1 fans out a 25 MHz or 100 MHz reference to four loads with matched output skew, keeping the radar chirp and camera frame timing aligned. Its 350 MHz ceiling covers modern high-frequency references, and differential input acceptance lets it sit directly on an LVDS/LVPECL-derived single-ended tap. The 16-VFQFN exposed pad provides the solid ground return needed for low-jitter operation in electrically noisy vehicular environments.
Рекомендуется
Industrial PLC and Motor Drive Control Cards
Industrial controllers using C2000 MCUs and FPGAs require multiple copies of a system clock across isolation and interface circuitry. The LMK00804BQWRGTRQ1 fans out one reference to the MCU, FPGA, and communication PHYs, and its level translation drives 3.3V logic from a 1.8V oscillator or vice versa. Although automotive-qualified, its wide temperature range and robustness equally benefit factory-floor temperature swings. The glitchless enable is valuable when control cards hot-swap clock domains during firmware updates or redundant-controller failover.
Рекомендуется
Networking and Telecom Line Cards
Line cards must distribute a recovered or synthesized reference to Ethernet PHYs, retimers, and serializers. The LMK00804BQWRGTRQ1 provides four low-skew LVCMOS copies of a single reference, with the selectable dual input enabling automatic failover between a primary and backup reference clock. The 350 MHz input range covers 156.25 MHz and 322.26 MHz class references used in 10G/25G designs, and the level translator adapts 1.8V PHY outputs to 3.3V legacy loads, simplifying mixed-voltage board design.
Рекомендуется
Test and Measurement Instrument Timing
Bench instruments and automated test equipment distribute a master reference to ADCs, FPGAs, and trigger logic. The B-version LMK00804B low additive jitter preserves sample-clock purity for the precision ADCs in the signal chain, while matched output skew keeps multi-channel acquisition synchronized. The dual selectable input supports switching between an internal ovenized reference and an external 10 MHz input, and the glitchless enable avoids spurious trigger events when references change. Wide 1.5V-to-3.3V output levels interface directly with mixed-voltage measurement front ends.
Рекомендуется
Server and Storage Backplane Clock Fan-out
Server and storage systems replicate a baseboard reference across NVMe controllers, BMCs, and switch ASICs. The LMK00804BQWRGTRQ1 fans out one reference to four clock loads with minimal skew, and its selectable dual inputs support failover between a main clock generator and a hot-spare. The 16-VFQFN small footprint fits dense clock-tree routing zones on backplanes, and the 3.3V output level directly drives legacy PCI-style loads while 1.8V outputs serve modern silicon. RoHS-compliant construction suits high-volume datacenter hardware.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LMK00804BQWRGTRQ1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LMK00804BQWRGTR | LMK00804BQWRGTTQ1 | LMK00804BWRGTRQ1 |
|---|---|---|---|---|
| Package | 16-VFQFN exposed pad (RGTR) | 16-VFQFN exposed pad - same | 16-VFQFN exposed pad - same | 16-VFQFN exposed pad - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Output Configuration | 1:4 LVCMOS | 1:4 LVCMOS | 1:4 LVCMOS | 1:4 LVCMOS |
| Max Frequency | 350 MHz | 350 MHz | 350 MHz | 350 MHz |
| AEC-Q100 Qualified | Yes (-Q1) | No (industrial grade) | Yes (-Q1) | Yes (-Q1) |
| Level Translation | 1.5V-3.3V outputs | 1.5V-3.3V outputs | 1.5V-3.3V outputs | 1.5V-3.3V outputs |
| Glitchless Enable | Yes | Yes | Yes | Yes |
Ключевые отличия
- Automotive AEC-Q100 qualification (против LMK00804BQWRGTR)
- B-version die with improved jitter (против LMK00804-Q1 (original))
- Prototype-friendly small reel option (против LMK00804BQWRGTRQ1 (3000-reel))
Заметки по проектированию
Solder the exposed thermal pad of the 16-VFQFN package directly to a solid ground plane with a 3x3 via array. This pad is the primary ground return for the four LVCMOS output drivers; a poor pad connection raises ground bounce and degrades output-to-output skew and additive jitter. Keep output traces 50-ohm controlled impedance when driving long traces, and length-match outputs that feed phase-sensitive loads.
Decouple each VDD and VDDO pin with 0.1uF X7R ceramics placed within 2 mm of the pins, plus one 4.7uF bulk capacitor per supply rail. Use a dedicated low-noise LDO for VDDO when driving sensitive loads, since output switching current modulates VDDO directly; the output level equals VDDO. Avoid routing switching-regulator ripple under the clock traces.
For single-ended operation, terminate the unused differential complement (CLKINx_N) per the datasheet recommendation - floating it causes input-threshold chatter and glitched outputs. When using CLK_SEL between asynchronous inputs, expect momentary phase discontinuity; the glitchless enable only protects the CLK_EN gating, not input switching while running.
Информация о соответствии
AEC-Q100 qualified per TI product page (-Q1 suffix). RoHS and lead-free per DigiKey listing; REACH/halogen details not present in provided data.
