Analog Devices

LT1012IJ8 - Precision Picoamp Op Amp | Analog Devices

Артикул: LT1012IJ8 ✗ Снят с производства
8 uV Vdss 25 pA Id 8-CERDIP, 0.300 inch, 7.62 mm Package
MOQ: 1 |

LT1012IJ8 Обзор

The Analog Devices LT1012IJ8 is a single-circuit precision operational amplifier with picoampere input bias current, microvolt-level input offset voltage, and low-noise performance, housed in an 8-pin CERDIP package. The device is specified for a low input bias current of 25 pA, an input offset voltage of 8 uV, and an industrial operating temperature range from -40°C to +85°C. The LT1012IJ8 is currently listed as obsolete.

A precision operational amplifier is a voltage-input, voltage-output amplifier designed to minimize errors introduced by input bias current, offset voltage, drift, noise, and common-mode voltage. Within the amplifier hierarchy, it belongs to the precision op-amp category, combining low-dropout operation, low-power capability, and high input impedance for instrumentation, buffering, and signal-conditioning systems where source leakage and DC accuracy are important.

The LT1012IJ8 provides picoampere-class bias-current behavior over its operating range, helping minimize error when measuring high-impedance sources. Its 8 uV offset specification supports accurate amplification of small signals, while the internally compensated architecture simplifies closed-loop use. The manufacturer also identifies very high common-mode and power-supply rejection ratios, very low warm-up drift, and the ability to deliver 5 mA of load current at a voltage gain of one million.

Low power is central to the device architecture. Analog Devices states that the LT1012 can operate from two Ni-Cad batteries while dissipating 1 mW, making it suitable for portable precision systems where available energy and thermal rise are constrained. Its precision characteristics are maintained from -55°C to +125°C for the LT1012 family, while the LT1012IJ8 order code is specified for -40°C to +85°C.

Typical uses include pH and electrochemical measurement front ends, photodiode and other high-impedance sensor amplifiers, precision current-to-voltage converters, low-level instrumentation, and battery-powered measurement equipment. In these applications, low bias current reduces leakage across sensitive sources, while low offset voltage helps preserve signal integrity at the input stage.

Layout should keep input-node leakage to a minimum, provide clean grounding around the signal path, and use guarding where surface contamination or PCB leakage could otherwise dominate picoampere measurements. The power supply must remain within the manufacturer-specified operating limits, and output drive should match the required load and feedback network.

This product page combines the LT1012IJ8 precision specifications, operating-class information, sourcing workflow, and application-focused design guidance with explicit distinctions between the obsolete orderable MPN and the broader LT1012 family.

Аналоги без доработки для LT1012IJ8 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LT1012IJ8 (тот же форм-фактор и посадочное место) — отличается по Compensation, Input Bias Current, Input Offset Voltage, Operating Temperature Range, Package.

Analog Devices
Compensation: Internal
Input Bias Current: Picoampere class
Input Offset Voltage: Microvolt class
Сравнить с LT1012IJ8 →

LT1012IN8

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 8-CERDIP (0.300 inch, 7.62 mm)
Single, internally compensated precision operational amplifier · Picoampere class · Microvolt class · Low drift with time and temperature · Low noise · Low noise · 5 mA · 1 mW on two Ni-Cad batteries

Уточнить цену

Открыть даташит →

LT1012CN8

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-CERDIP (0.300 inch, 7.62 mm)
Same LT1012 family and 8-CERDIP footprint; LT1012IJ8 is rated for -40°C to +85°C, while the CN8 order code denotes a different commercial-temperature grade

📋 Справочный аналог (нет в каталоге)

LT1012IJ8 Максимальные параметры и электрические характеристики

Product Type Precision operational amplifier
Number of Circuits 1 circuit
Input Bias Current 25 pA
Input Offset Voltage 8 uV
Power Dissipation 1 mW
Output Load Current 5 mA
Voltage Gain 1,000,000 V/V
Supply Configuration Two Ni-Cad batteries
Диапазон рабочих температур -40°C to +85°C
LT1012 Family Bias-Current Temperature Range -55°C to +125°C
Compensation Internally compensated
Корпус 8-CERDIP, 0.300 inch, 7.62 mm
Тип монтажа Through-hole
Number of Terminals 8 terminals
Packaging Tube
Minimum Order Quantity 250 pieces
Temperature Grade Industrial

Руководство по цоколевке LT1012IJ8 в корпусе 8-cerdip, 0.300 inch, 7.62 mm

Цоколевка для LT1012IJ8 (корпус 8-cerdip, 0.300 inch, 7.62 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-cerdip, 0.300 inch, 7.62 mm для LT1012IJ8

Нет подробных данных о распиновке для LT1012IJ8.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

LT1012IJ8 подходит для 6 применениеs: pH and Electrochemical Sensor Front Ends, Photodiode Signal Conditioning, Precision Current-to-Voltage Conversion, Battery-Powered Precision Measurement, High-Impedance Instrumentation Buffering, Precision Bridge and Strain Signal Conditioning.

💊

pH and Electrochemical Sensor Front Ends

The LT1012IJ8 is appropriate for electrochemical sensors because its 25 pA input bias current limits the error introduced by high-impedance glass electrodes and related probes. The 8 uV input offset specification helps preserve accuracy when the sensor output is small and subjected to gain. Place the amplifier close to the sensor input, maintain a contamination-free PCB surface around the input node, and consider guarding if humidity or residue can create leakage paths. The low 1 mW power dissipation also supports compact battery-powered electrochemical instruments without requiring a high-output-current stage.

📷

Photodiode Signal Conditioning

A photodiode connected to the LT1012IJ8 benefits from the amplifier's 25 pA input bias current, which is important when the diode has picoampere-to-nanoampere-level photocurrents. The low 8 uV offset voltage helps reduce errors in dark-current measurements and low-light signals, while internally compensated operation supports straightforward feedback-network design. Keep the photodiode and amplifier input path short, avoid leakage-producing contamination, and provide a stable reference. The 5 mA load-current capability and 1 mW dissipation make the device practical for compact optical instruments and portable light sensors.

⚡

Precision Current-to-Voltage Conversion

The LT1012IJ8 can form the input stage of a precision transimpedance amplifier for low-level current measurements. Its 25 pA bias current limits the bias-generated voltage error across a large feedback resistor, while the 8 uV offset specification supports accurate conversion of small currents into measurable voltages. Feedback resistor and compensation values must be selected from the operating feedback gain and bandwidth requirements. Protect the input from excessive voltage, control parasitic capacitance, and use a guard structure around the summing node when board leakage is significant.

📱

Battery-Powered Precision Measurement

The LT1012IJ8 suits portable analyzers and meters that require low noise and very low input leakage while operating from limited battery energy. Analog Devices specifies operation from two Ni-Cad batteries with 1 mW power dissipation, while the device retains 25 pA input bias current and 8 uV input offset voltage. These characteristics help reduce errors in portable pH meters, environmental monitors, and laboratory probes. Select capacitors and reference components for low leakage, maintain clean input routing, and verify that the battery voltage remains within the device's specified supply range throughout discharge.

🖥️

High-Impedance Instrumentation Buffering

The LT1012IJ8 can buffer high-impedance instrumentation signals where conventional bipolar input current would create unacceptable source-loading error. The 25 pA input bias current is the central advantage, and the device's high common-mode and power-supply rejection ratios support stable operation in multi-rail measurement systems. Its 5 mA output capability allows it to drive typical precision feedback networks, although the load should remain within the specified operating range. Confirm the exact common-mode range and output swing against the manufacturer datasheet before using it near supply-rail limits.

🏭

Precision Bridge and Strain Signal Conditioning

The LT1012IJ8 can amplify the small differential signals produced by strain-gauge bridges and resistive sensors while minimizing input bias-current error. Its 25 pA bias current limits current drawn from the sensor bridge, and the 8 uV offset specification supports accurate operation near the bridge's null point. The through-hole CERDIP package can also simplify prototyping and repair of legacy industrial instrumentation. Nevertheless, bridge excitation, common-mode range, resistor matching, and input filtering must be designed around the exact datasheet limits rather than relying only on nominal precision figures.

Where can I download the LT1012IJ8 datasheet PDF?
The official LT1012IJ8 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/LT1012.pdf. The document describes the LT1012 precision operational amplifier, including its picoampere bias current, low offset voltage, low noise, low power operation, and electrical characteristics. Use the manufacturer document for the definitive ordering information, pin connections, test conditions, and electrical limits for the LT1012IJ8 order code.
What are the key specifications of LT1012IJ8 that engineers should know?
The LT1012IJ8 is a single-circuit precision op amp with 25 pA input bias current, 8 uV input offset voltage, 5 mA output load capability, and 1 mW power dissipation in an 8-CERDIP package. According to the Analog Devices manufacturer datasheet, the device also offers extremely high common-mode and power-supply rejection, low noise, internally compensated operation, and bias current maintained over the LT1012 family temperature range.
Is LT1012IJ8 suitable for high-impedance sensor amplification?
The LT1012IJ8 is well suited to high-impedance sensor amplification because its input bias current is only 25 pA. According to the Analog Devices product page, picoampere bias currents are maintained across the LT1012 family temperature range. This low leakage reduces the error introduced by sensors and transducers with very high source impedance, while the 8 uV offset specification supports accurate small-signal amplification.
What is the operating temperature range of LT1012IJ8?
The LT1012IJ8 operates from -40°C to +85°C. The Analog Devices LT1012 product page describes the LT1012 family as maintaining picoampere bias currents from -55°C to +125°C, but the specific LT1012IJ8 order code carries the narrower industrial-temperature grade. Confirm the grade marking and absolute maximum ratings against the manufacturer datasheet before using the device outside its specified operating range.
Why is the LT1012IJ8 suitable for battery-powered instrumentation?
The LT1012IJ8 operates from two Ni-Cad batteries while dissipating 1 mW, according to the Analog Devices manufacturer product page. That low power level supports compact, portable measurement systems where continuous dissipation would shorten operating time or raise internal temperature. The device combines that low-power capability with 25 pA input bias current and 8 uV offset voltage for precision front-end designs.
What is the difference between LT1012IJ8 and LT1012?
LT1012IJ8 is a specific orderable LT1012 variant rather than a separate amplifier architecture. The manufacturer product page describes the LT1012 family, while distributor information identifies LT1012IJ8 as an industrial-temperature, single-circuit device in an 8-CERDIP package. The principal distinction is the order-code temperature grade and package-specific ordering information; verify exact suffix-specific limits in the manufacturer datasheet.
When should I choose LT1012IJ8 instead of a general-purpose precision op amp?
Choose the LT1012IJ8 when picoampere input bias current is more important than minimum package size or cost. Its 25 pA bias current reduces leakage from high-impedance sources, while 8 uV input offset voltage supports low-level precision measurements. The trade-off is an obsolete lifecycle status and a through-hole 8-CERDIP package, which may be unsuitable for new high-density surface-mount designs unless legacy support is required.
What is the best drop-in replacement for LT1012IJ8?
A drop-in replacement must preserve the 8-pin CERDIP footprint, pin functions, power requirements, and precision electrical behavior. The LT1012 family offers the closest same-manufacturer options, but each suffix must be checked for temperature grade, availability, and electrical limits. Use the Request a Quote form on this page to identify the currently acceptable replacement for the required operating grade and package configuration.
Can LT1012IN8 replace LT1012IJ8?
LT1012IN8 may be considered as a same-family replacement, but it should not be assumed to be an unconditional substitute. The family members share the LT1012 amplifier architecture, while the order-code suffix determines the commercial grade and temperature range. Confirm the exact pinout, operating-temperature limits, supply range, and lifecycle status for the candidate before approving the replacement in a new or safety-critical design.
How do I choose between LT1012IJ8 and LT1012IN8?
Choose the candidate whose specified temperature grade, electrical limits, availability, and package match the production requirement. The LT1012IJ8 is identified as an industrial-temperature 8-CERDIP device operating from -40°C to +85°C, with 25 pA bias current and 8 uV offset voltage. Compare those exact characteristics against LT1012IN8 rather than selecting solely by family name or package shape.
Is LT1012IJ8 the same as a Burr-Brown precision amplifier replacement?
The LT1012IJ8 cannot be declared interchangeable with a Burr-Brown candidate without checking pin functions and operating characteristics. The manufacturer lineage connects the LT1012 family to Analog Devices, but a genuine drop-in replacement still requires the same 8-CERDIP footprint and compatible power-supply, bias-current, offset-voltage, noise, and output-drive requirements. Treat cross-brand candidates as qualified alternatives only after full datasheet comparison.
Where can I buy LT1012IJ8 online?
Use the Request a Quote form on this page to request LT1012IJ8 availability, minimum order quantity, and a current quotation. The LT1012IJ8 is listed as obsolete, so stock and lifecycle treatment may differ from active catalog parts. The form provides a direct sourcing path without requiring buyers to rely on stale catalog pricing or unqualified marketplace listings.
What is the lead time for obsolete LT1012IJ8 parts?
The current lead time for the obsolete LT1012IJ8 must be confirmed through the Request a Quote form on this page. The manufacturer family remains documented, while the specific order code is reported as obsolete and can involve limited inventory, legacy sourcing conditions, or manufacturer change control. Provide the required quantity, package form, date code, and inspection requirements with the request.
Is LT1012IJ8 in stock?
Stock for LT1012IJ8 should be confirmed through the Request a Quote form on this page. One product listing reports an indicative quantity of 1,000 pieces, but the device is marked obsolete, and that figure may not represent current freely available inventory. The quotation process can confirm allocation, traceability, and lot or date-code requirements before an order is placed.
What is the price of LT1012IJ8?
Use the Request a Quote form on this page for the current LT1012IJ8 price and quantity breaks. Because the part is obsolete, transaction conditions can vary with available lot size, traceability, inspection level, and packaging. The structured pricing shown with this product records a historical unit reference of 5.5532 USD as of 2026-11, but buyers should request a live quotation rather than rely on that static reference.
Does LT1012IJ8 need input guarding for picoampere measurements?
Input guarding can be important in picoampere-class measurements, although the exact implementation depends on PCB cleanliness and source impedance. The LT1012IJ8 has only 25 pA input bias current according to the manufacturer product information, so board leakage, contamination, and flux residue can become significant near that level. Keep the input path clean, remove residue, and use a driven guard where the layout would otherwise collect leakage.

Справочные инженерные данные для LT1012IJ8 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose LT1012IJ8 for legacy industrial, laboratory, or battery-powered precision designs that specifically require the combination of a 25 pA input bias current, 8 uV input offset voltage, and an industrial-temperature range of -40°C to +85°C in an 8-CERDIP package. LT1012IN8 may be preferable when its wider or more appropriate temperature grade matches the operating environment, provided its electrical limits and lifecycle status are confirmed. LT1012CN8 may be suitable for commercial-temperature applications when its grade-specific limits meet the system requirements. The principal trade-off is that all three are legacy through-hole family members, and the LT1012IJ8 is reported as obsolete. For new surface-mount or higher-volume production designs, select a currently maintained precision amplifier based on the full input-leakage, offset, noise, common-mode, supply, and lifecycle requirements rather than relying on package similarity alone.

Сравнение с аналогами

Параметр Этот товар LT1012IN8 LT1012CN8
Package 8-CERDIP (0.300 inch, 7.62 mm) 8-CERDIP (0.300 inch, 7.62 mm) 8-CERDIP (0.300 inch, 7.62 mm)
Brand Analog Devices Analog Devices Analog Devices
Product Type Single-circuit precision operational amplifier Single-circuit precision operational amplifier Single-circuit precision operational amplifier
Compensation Internally compensated Internally compensated Internally compensated

Ключевые отличия

  • Very low input bias current for precision leakage-sensitive measurement (против LT1012IN8)
  • Microvolt input offset supports small-signal accuracy (против LT1012CN8)
  • Low 1 mW dissipation supports portable precision systems (против LT1012IN8)

Заметки по проектированию

Keep the LT1012IJ8 input node physically short and isolate it from high-impedance leakage paths. The amplifier's 25 pA input bias current means that contaminated board surfaces, moisture, and flux residue can create errors comparable to the intended sensor current. Clean the PCB after assembly, avoid conformal-coating residue around the input, and use a driven guard around the sensitive node when the source impedance is very high.

Design the supply around the LT1012IJ8's low 1 mW dissipation figure while accounting for actual load and supply headroom. The family can operate from two Ni-Cad batteries, but battery discharge changes the available common-mode and output-swing range. Verify the exact supply-voltage limits in the manufacturer datasheet, use local bypass capacitance, and ensure that the output does not exceed the 5 mA load capability under worst-case feedback-network conditions.

For transimpedance or sensor-amplifier layouts, minimize parasitic capacitance at the summing node and place the feedback network close to the amplifier. Board leakage can be more important than the amplifier's 25 pA bias current, so route sensitive inputs away from power switches, inductors, and exposed connector contacts. If leakage is measured above the design target, apply guarding and compare the result with a clean test fixture before changing gain or filter values.

Do not select an LT1012 family suffix solely because it uses an 8-pin DIP-style package. LT1012IJ8 is specified from -40°C to +85°C, and an alternative temperature grade may have different operating or qualification requirements. Confirm the exact suffix, electrical limits, pin connections, lifecycle status, and packaging before approving a replacement in production or safety-related equipment.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the LT1012IJ8 order code. AEC-Q100 is not applicable to this industrial-temperature precision operational amplifier.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LT1012IJ8 datasheet LT1012IJ8 datasheet pdf LT1012IJ8 pinout LT1012IJ8 specifications Analog Devices LT1012IJ8 LT1012IJ8 equivalent LT1012IJ8 replacement LT1012IJ8 vs LT1012IN8 LT1012IJ8 price LT1012IJ8 stock LT1012IJ8 obsolete LT1012 pH sensor amplifier LT1012 picoamp input current LT1012 8 CERDIP package

Связанные компоненты & термины

Analog Devices LT1012IJ8 LT1012 LT1012IN8 LT1012CN8 precision operational amplifier precision op amp signal conditioning instrumentation amplifier picoampere input bias current microvolt offset voltage power supply rejection ratio common-mode rejection ratio internally compensated amplifier 8-CERDIP DIP family through-hole package surface-mount pH electrode photodiode strain-gauge bridge transimpedance amplifier battery-powered instrumentation low-noise amplifier high-impedance sensor
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ