LT1012IJ8 - Precision Picoamp Op Amp | Analog Devices
部品番号: LT1012IJ8 ✗ 生産終了LT1012IJ8 概要
A precision operational amplifier is a voltage-input, voltage-output amplifier designed to minimize errors introduced by input bias current, offset voltage, drift, noise, and common-mode voltage. Within the amplifier hierarchy, it belongs to the precision op-amp category, combining low-dropout operation, low-power capability, and high input impedance for instrumentation, buffering, and signal-conditioning systems where source leakage and DC accuracy are important.
The LT1012IJ8 provides picoampere-class bias-current behavior over its operating range, helping minimize error when measuring high-impedance sources. Its 8 uV offset specification supports accurate amplification of small signals, while the internally compensated architecture simplifies closed-loop use. The manufacturer also identifies very high common-mode and power-supply rejection ratios, very low warm-up drift, and the ability to deliver 5 mA of load current at a voltage gain of one million.
Low power is central to the device architecture. Analog Devices states that the LT1012 can operate from two Ni-Cad batteries while dissipating 1 mW, making it suitable for portable precision systems where available energy and thermal rise are constrained. Its precision characteristics are maintained from -55°C to +125°C for the LT1012 family, while the LT1012IJ8 order code is specified for -40°C to +85°C.
Typical uses include pH and electrochemical measurement front ends, photodiode and other high-impedance sensor amplifiers, precision current-to-voltage converters, low-level instrumentation, and battery-powered measurement equipment. In these applications, low bias current reduces leakage across sensitive sources, while low offset voltage helps preserve signal integrity at the input stage.
Layout should keep input-node leakage to a minimum, provide clean grounding around the signal path, and use guarding where surface contamination or PCB leakage could otherwise dominate picoampere measurements. The power supply must remain within the manufacturer-specified operating limits, and output drive should match the required load and feedback network.
This product page combines the LT1012IJ8 precision specifications, operating-class information, sourcing workflow, and application-focused design guidance with explicit distinctions between the obsolete orderable MPN and the broader LT1012 family.
ドロップイン代替品: LT1012IJ8 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LT1012IJ8 (同一形状・フットプリント) — 相違点: Compensation, Input Bias Current, Input Offset Voltage, Operating Temperature Range, Package.
LT1012IN8
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →LT1012CN8
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LT1012IJ8 最大定格&電気的特性
| Product Type | Precision operational amplifier |
| Number of Circuits | 1 circuit |
| Input Bias Current | 25 pA |
| Input Offset Voltage | 8 uV |
| Power Dissipation | 1 mW |
| Output Load Current | 5 mA |
| Voltage Gain | 1,000,000 V/V |
| Supply Configuration | Two Ni-Cad batteries |
| 動作温度範囲 | -40°C to +85°C |
| LT1012 Family Bias-Current Temperature Range | -55°C to +125°C |
| Compensation | Internally compensated |
| パッケージ | 8-CERDIP, 0.300 inch, 7.62 mm |
| 実装タイプ | Through-hole |
| Number of Terminals | 8 terminals |
| Packaging | Tube |
| Minimum Order Quantity | 250 pieces |
| Temperature Grade | Industrial |
LT1012IJ8 8-cerdip, 0.300 inch, 7.62 mm ピン配置ガイド
LT1012IJ8 (8-cerdip, 0.300 inch, 7.62 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: LT1012IJ8.
詳細は データシート をご参照ください。
主な用途
LT1012IJ8 の用途: 6 件s: pH and Electrochemical Sensor Front Ends, Photodiode Signal Conditioning, Precision Current-to-Voltage Conversion, Battery-Powered Precision Measurement, High-Impedance Instrumentation Buffering, Precision Bridge and Strain Signal Conditioning.
pH and Electrochemical Sensor Front Ends
The LT1012IJ8 is appropriate for electrochemical sensors because its 25 pA input bias current limits the error introduced by high-impedance glass electrodes and related probes. The 8 uV input offset specification helps preserve accuracy when the sensor output is small and subjected to gain. Place the amplifier close to the sensor input, maintain a contamination-free PCB surface around the input node, and consider guarding if humidity or residue can create leakage paths. The low 1 mW power dissipation also supports compact battery-powered electrochemical instruments without requiring a high-output-current stage.
Photodiode Signal Conditioning
A photodiode connected to the LT1012IJ8 benefits from the amplifier's 25 pA input bias current, which is important when the diode has picoampere-to-nanoampere-level photocurrents. The low 8 uV offset voltage helps reduce errors in dark-current measurements and low-light signals, while internally compensated operation supports straightforward feedback-network design. Keep the photodiode and amplifier input path short, avoid leakage-producing contamination, and provide a stable reference. The 5 mA load-current capability and 1 mW dissipation make the device practical for compact optical instruments and portable light sensors.
Precision Current-to-Voltage Conversion
The LT1012IJ8 can form the input stage of a precision transimpedance amplifier for low-level current measurements. Its 25 pA bias current limits the bias-generated voltage error across a large feedback resistor, while the 8 uV offset specification supports accurate conversion of small currents into measurable voltages. Feedback resistor and compensation values must be selected from the operating feedback gain and bandwidth requirements. Protect the input from excessive voltage, control parasitic capacitance, and use a guard structure around the summing node when board leakage is significant.
Battery-Powered Precision Measurement
The LT1012IJ8 suits portable analyzers and meters that require low noise and very low input leakage while operating from limited battery energy. Analog Devices specifies operation from two Ni-Cad batteries with 1 mW power dissipation, while the device retains 25 pA input bias current and 8 uV input offset voltage. These characteristics help reduce errors in portable pH meters, environmental monitors, and laboratory probes. Select capacitors and reference components for low leakage, maintain clean input routing, and verify that the battery voltage remains within the device's specified supply range throughout discharge.
High-Impedance Instrumentation Buffering
The LT1012IJ8 can buffer high-impedance instrumentation signals where conventional bipolar input current would create unacceptable source-loading error. The 25 pA input bias current is the central advantage, and the device's high common-mode and power-supply rejection ratios support stable operation in multi-rail measurement systems. Its 5 mA output capability allows it to drive typical precision feedback networks, although the load should remain within the specified operating range. Confirm the exact common-mode range and output swing against the manufacturer datasheet before using it near supply-rail limits.
Precision Bridge and Strain Signal Conditioning
The LT1012IJ8 can amplify the small differential signals produced by strain-gauge bridges and resistive sensors while minimizing input bias-current error. Its 25 pA bias current limits current drawn from the sensor bridge, and the 8 uV offset specification supports accurate operation near the bridge's null point. The through-hole CERDIP package can also simplify prototyping and repair of legacy industrial instrumentation. Nevertheless, bridge excitation, common-mode range, resistor matching, and input filtering must be designed around the exact datasheet limits rather than relying only on nominal precision figures.
エンジニアリング参考データ: LT1012IJ8 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LT1012IN8 | LT1012CN8 |
|---|---|---|---|
| Package | 8-CERDIP (0.300 inch, 7.62 mm) | 8-CERDIP (0.300 inch, 7.62 mm) | 8-CERDIP (0.300 inch, 7.62 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Single-circuit precision operational amplifier | Single-circuit precision operational amplifier | Single-circuit precision operational amplifier |
| Compensation | Internally compensated | Internally compensated | Internally compensated |
主な差別化要因
- Very low input bias current for precision leakage-sensitive measurement (vs LT1012IN8)
- Microvolt input offset supports small-signal accuracy (vs LT1012CN8)
- Low 1 mW dissipation supports portable precision systems (vs LT1012IN8)
設計ノート
Keep the LT1012IJ8 input node physically short and isolate it from high-impedance leakage paths. The amplifier's 25 pA input bias current means that contaminated board surfaces, moisture, and flux residue can create errors comparable to the intended sensor current. Clean the PCB after assembly, avoid conformal-coating residue around the input, and use a driven guard around the sensitive node when the source impedance is very high.
Design the supply around the LT1012IJ8's low 1 mW dissipation figure while accounting for actual load and supply headroom. The family can operate from two Ni-Cad batteries, but battery discharge changes the available common-mode and output-swing range. Verify the exact supply-voltage limits in the manufacturer datasheet, use local bypass capacitance, and ensure that the output does not exceed the 5 mA load capability under worst-case feedback-network conditions.
For transimpedance or sensor-amplifier layouts, minimize parasitic capacitance at the summing node and place the feedback network close to the amplifier. Board leakage can be more important than the amplifier's 25 pA bias current, so route sensitive inputs away from power switches, inductors, and exposed connector contacts. If leakage is measured above the design target, apply guarding and compare the result with a clean test fixture before changing gain or filter values.
Do not select an LT1012 family suffix solely because it uses an 8-pin DIP-style package. LT1012IJ8 is specified from -40°C to +85°C, and an alternative temperature grade may have different operating or qualification requirements. Confirm the exact suffix, electrical limits, pin connections, lifecycle status, and packaging before approving a replacement in production or safety-related equipment.
コンプライアンス情報
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the LT1012IJ8 order code. AEC-Q100 is not applicable to this industrial-temperature precision operational amplifier.