Texas Instruments

MAX232ECPW - 250kbps RS-232 Transceiver | Texas Instruments

Артикул: MAX232ECPW ✓ Активен
4.5V to 5.5V Vdss 16-pin TSSOP Package
MOQ: 1 |

MAX232ECPW Обзор

The Texas Instruments MAX232ECPW is a 5V dual-channel RS-232 transceiver with two drivers and two receivers, a 250kbps data rate, and a 16-pin TSSOP package. It operates from a 4.5V to 5.5V supply and includes IEC 61000-4-2 electrostatic-discharge protection.

An RS-232 transceiver is an interface IC that connects low-voltage TTL or CMOS logic to the bipolar voltage levels used by RS-232 equipment. The driver channels convert logic signals into RS-232 output levels, while the receiver channels convert incoming RS-232 signals into logic-compatible levels. A MAX232E-family device also contains a charge-pump voltage generator, allowing bipolar RS-232 levels to be produced from a single 5V supply.

The MAX232ECPW combines two transmit channels, two receive channels, and electrostatic-discharge protection in one compact 16-TSSOP package. Its stated 250kbps rate suits short-distance point-to-point serial links, including industrial-control equipment, data-acquisition systems, service interfaces, and legacy computer peripherals. The integrated protection improves robustness in connector-adjacent circuits where electrostatic discharge is a realistic concern.

Technically, the MAX232ECPW is designed for a single 5V supply and combines its charge-pump circuitry, drivers, and receivers in one interface device. The dual-driver and dual-receiver arrangement supports two independent RS-232 directions on a point-to-point link. Its 250kbps maximum signaling rate is substantially faster than conventional asynchronous RS-232 links, although cable length, capacitance, grounding, and driver loading still determine achievable communication distance.

Typical uses include programmable-logic-controller service ports, industrial serial adapters, instrumentation control links, embedded-system debug connections, and communications between equipment with legacy DB9 or equivalent RS-232 ports. The MAX232ECPW is particularly appropriate where a compact surface-mount implementation and protected RS-232 line interface are required without a separate external protection network.

PCB design should follow the capacitor and charge-pump requirements in the manufacturer datasheet, because the voltage generator depends on correctly sized charge-pump capacitors. Keep the RS-232 connector-side traces away from sensitive logic, provide a low-impedance ground reference, and place input and charge-pump capacitors close to their associated pins.

This product page combines the MAX232ECPW electrical characteristics, package information, compatible alternatives, application guidance, and practical design notes to support faster component selection and PCB implementation.

Аналоги без доработки для MAX232ECPW — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX232ECPW (тот же форм-фактор и посадочное место) — отличается по Supply Voltage Range, ESD Protection, Maximum Data Rate, Product Type.

Texas Instruments
Supply Voltage Range: 3 V to 5.5 V
Product Type: Dual RS-232 line transceiver
Сравнить с MAX232ECPW →
Texas Instruments
Supply Voltage Range: 3 V to 5.5 V
ESD Protection: ±15 kV IEC, pin-to-pin
Maximum Data Rate: 250 kbit/s
Сравнить с MAX232ECPW →

MAX232EIPWR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 driver and receiver transceiver · 2 channels · 2 · 2 · 5 V · 250 kbps · Approximately -9 V to +9 V · TIA/EIA-232-F input converted to 5 V TTL/CMOS

Уточнить цену

Открыть даташит →

MAX3232ECPW

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line transceiver · 3 V to 5.5 V · 2 channels · 2 channels · 250 kbit/s · 30 V/µs · ±15 kV · TIA/EIA-232-F

Уточнить цену

Открыть даташит →

MAX3232EIPWRQ1

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 16-pin TSSOP
2 · 2 · 2/2 full-duplex · 3 V to 5.5 V · 250 kbit/s · TIA/EIA-232-F · ITU V.28 · ±15 kV IEC, pin-to-pin

Уточнить цену

Открыть даташит →

MAX232AEEPE

✅ Прямая замена ⚠️ Характеристики не проверены
📦 16-pin TSSOP
Same MAX232E-family dual RS-232 function in a 16-pin TSSOP candidate; exact suffix availability and pin assignment require confirmation

📋 Справочный аналог (нет в каталоге)

TRS232EIPWR

✅ Прямая замена
📦 16-pin TSSOP
Cross-brand candidate in the comparison results with the same 16-pin TSSOP form factor; 5V, 250kbps, pin, and capacitor details require confirmation

📋 Справочный аналог (нет в каталоге)

MAX232ECPW Характеристики

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Channel Configuration 2/2 full RS-232 transceiver
Supply Voltage Range 4.5V to 5.5V
Nominal Supply Voltage 5V
Maximum Data Rate 250kbps
ESD Protection IEC 61000-4-2
Logic Compatibility 5V TTL/CMOS
RS-232 Standard Level TIA/EIA-232-F
Корпус 16-pin TSSOP
Тип монтажа Surface mount
Driver Output Type RS-232 bipolar line driver
Receiver Output Type TTL/CMOS logic receiver
Voltage Generation Single 5V supply with capacitive voltage generator

Руководство по цоколевке MAX232ECPW в корпусе 16-pin tssop

Цоколевка для MAX232ECPW (корпус 16-pin tssop). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16-pin tssop для MAX232ECPW

Нет подробных данных о распиновке для MAX232ECPW.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX232ECPW подходит для 6 применениеs: Programmable Logic Controller Service Port, Industrial Data Acquisition Equipment, Embedded System Debug Interface, Legacy Computer Peripheral Connection, Instrumentation Control and Service Link, Industrial Networking Gateway.

🏭

Programmable Logic Controller Service Port

The MAX232ECPW fits legacy PLC service ports because its two drivers and two receivers provide a complete point-to-point RS-232 interface from a single 5V rail. Its 250kbps maximum signaling rate is suitable for configuration downloads, status exchange, and short diagnostic sessions. IEC 61000-4-2 protection adds useful resilience where the serial connector is exposed to electrostatic discharge. The 16-pin TSSOP package also keeps the interface compact enough for space-constrained controller boards.

⚡

Industrial Data Acquisition Equipment

The MAX232ECPW can connect laboratory and industrial data-acquisition equipment to a legacy RS-232 controller. Two transmit and two receive channels support bidirectional command and measurement traffic, while the 250kbps rate accommodates moderate-rate instrument data. Operating from 4.5V to 5.5V simplifies integration with conventional 5V logic. Its documented IEC 61000-4-2 protection is especially useful in industrial environments where exposed cables and connector contacts can receive electrostatic discharge.

🧩

Embedded System Debug Interface

The MAX232ECPW is useful for a legacy debug or configuration interface because it translates between 5V TTL or CMOS logic and RS-232 line levels. A pair of driver and receiver channels allows command transmission and status reception through one compact device. The 250kbps signaling limit supports firmware logs, bootloader messages, and diagnostic commands. IEC 61000-4-2 protection helps protect the interface when the cable is connected to a user-accessible service connector.

🖥️

Legacy Computer Peripheral Connection

The MAX232ECPW provides a modern surface-mount bridge for legacy DB9-style RS-232 ports on industrial computers, test systems, and service equipment. Its dual-channel arrangement is sufficient for transmit, receive, and hardware-flow-control signals commonly found on RS-232 links. The 5V supply range matches many embedded and legacy interface designs, while the TSSOP package reduces board area compared with older through-hole transceivers. Ensure the connector's signal-to-ground arrangement and cable length match the application.

🔧

Instrumentation Control and Service Link

The MAX232ECPW can serve as the service communications path in programmable instrumentation and test equipment. Its 250kbps rate is suitable for commands, calibration data, and periodic status reporting, while two drivers and two receivers support a standard bidirectional console connection. The single 5V architecture reduces the number of rails required around legacy serial hardware. IEC 61000-4-2 protection improves interface robustness when users connect service leads to external equipment in laboratories or production areas.

🌐

Industrial Networking Gateway

The MAX232ECPW can provide the legacy serial port on a gateway that bridges older equipment to a modern network. Bidirectional RS-232 communication allows the gateway to exchange configuration commands and telemetry with controllers that lack Ethernet connectivity. The 250kbps data rate suits supervisory traffic rather than bulk data transfer. Its 16-pin TSSOP footprint and integrated ESD protection make it practical for compact industrial interface cards, subject to proper grounding and cable-side surge protection.

What is the MAX232ECPW?
The MAX232ECPW is a Texas Instruments dual RS-232 transceiver containing two drivers, two receivers, a charge-pump voltage generator, and IEC 61000-4-2 electrostatic-discharge protection. According to the Texas Instruments manufacturer datasheet, it operates from a 4.5V to 5.5V supply, supports data rates up to 250kbps, and is packaged in a 16-pin TSSOP for surface-mount PCB assembly.
What are the key specifications of MAX232ECPW that engineers should know?
The MAX232ECPW provides a 2/2 RS-232 channel configuration, a 4.5V to 5.5V supply range, and a maximum data rate of 250kbps. The Texas Instruments manufacturer datasheet identifies the device as a 16-pin TSSOP dual driver/receiver with IEC 61000-4-2 protection. Its two drivers convert TTL or CMOS logic into RS-232 levels, while its two receivers convert incoming bipolar signals back into logic-compatible outputs.
Where can I download the MAX232ECPW datasheet PDF?
The MAX232ECPW datasheet is available from the Texas Instruments product documentation and from the linked datasheet archive. Use the manufacturer datasheet as the controlling document for pin assignments, recommended charge-pump capacitors, receiver thresholds, electrical limits, and ESD test conditions. The datasheet identifies the part as a 5V, 250kbps, 16-pin TSSOP dual RS-232 transceiver with IEC 61000-4-2 protection.
Where can I find the MAX232ECPW pinout?
The MAX232ECPW pinout is shown in the pin-configuration and pin-description sections of the Texas Instruments manufacturer datasheet. Use that table when assigning the supply pins, driver inputs and outputs, receiver inputs and outputs, charge-pump terminals, and exposed or functional package pins. The component is a 16-pin TSSOP, so the complete physical pin list should contain 16 numbered positions.
Is MAX232ECPW suitable for industrial RS-232 communication?
The MAX232ECPW is suitable for short-distance industrial RS-232 links that use a 5V interface and need up to 250kbps signaling. Its dual-driver, dual-receiver arrangement supports bidirectional point-to-point communication, while IEC 61000-4-2 protection helps manage electrostatic discharge at connector-adjacent circuits. The manufacturer datasheet should also be checked against the system temperature range and required isolation practices.
What power supply does MAX232ECPW require?
The MAX232ECPW requires a single 4.5V to 5.5V power supply, with 5V as the nominal operating voltage. According to the Texas Instruments manufacturer datasheet, the integrated capacitive voltage generator produces the bipolar voltage levels required for RS-232 from this supply. Correct charge-pump capacitor selection and placement are essential because the generated signal amplitude depends on that network.
What RS-232 data rate does MAX232ECPW support?
The MAX232ECPW supports RS-232 signaling up to 250kbps. This rating describes the transceiver's maximum supported line rate, not a guaranteed end-to-end distance: cable length, capacitance, grounding, connector quality, and the attached equipment can reduce practical throughput. The Texas Instruments manufacturer datasheet lists the device as a 5V, 250kbps dual-channel RS-232 transceiver.
What can replace MAX232ECPW on the same PCB?
A replacement must use the same 16-pin TSSOP footprint and provide compatible supply, driver, receiver, and charge-pump connections. MAX232E-family TSSOP devices can be considered when their pin assignment and electrical limits match, while TRS232EIPWR is a cross-brand option documented in the cross-reference results. Confirm pin compatibility, operating temperature, ESD rating, and charge-pump capacitor values against both device datasheets before substitution.
Can MAX232EIPWR replace MAX232ECPW?
MAX232EIPWR can serve as a candidate replacement for MAX232ECPW because both are MAX232E-family RS-232 transceivers offered in a 16-pin TSSOP configuration. The electrical function, 5V supply, dual-channel arrangement, and 250kbps class are closely aligned. Final approval should follow a datasheet comparison of pin functions, absolute maximum ratings, receiver thresholds, ESD performance, and capacitor requirements.
Is MAX3232ECPW a drop-in alternative to MAX232ECPW?
MAX3232ECPW is a same-manufacturer, 16-pin TSSOP RS-232 transceiver that can be evaluated as a drop-in alternative when its pinout and required external capacitors match the MAX232ECPW layout. Both families provide two drivers and two receivers from a 5V supply. Review the manufacturer datasheets for capacitance values, electrical limits, and any lead or temperature-grade differences before approving the replacement.
MAX232ECPW vs MAX232EIPWR: which is better for a new design?
MAX232ECPW and MAX232EIPWR are closely related 16-pin TSSOP RS-232 transceivers, so the better choice depends on ordering suffix, temperature grade, lifecycle, and confirmed pin compatibility rather than basic RS-232 function. Both use a 5V supply and provide two drivers and two receivers. Compare their ordering tables and electrical specifications to confirm that the selected suffix meets the product's environmental requirements.
MAX232ECPW vs TRS232EIPWR: which is better for a protected interface?
MAX232ECPW is the safer default when the system specifically requires the documented IEC 61000-4-2 protection level and exact Texas Instruments source. TRS232EIPWR may be attractive as a second-source 16-pin TSSOP option, but it should be selected only after its datasheet confirms equivalent pinout, 5V operation, 250kbps-class performance, and required charge-pump capacitors. ESD testing and qualification requirements must match the application.
Where to buy MAX232ECPW online?
Use the Request a Quote form on this page to request the MAX232ECPW and current commercial terms. The form is the appropriate route for checking availability, order quantities, and lead time without relying on stale catalog records. For technical qualification, request the exact ordering suffix shown on the component label or BOM, because package, temperature, and reel or tube choices can differ within the MAX232E family.
What is the price of MAX232ECPW?
The current MAX232ECPW price should be requested through the Request a Quote form on this page. A quote response should identify the exact 16-pin TSSOP ordering suffix, quantity, delivery packaging, and expected lead time. Because commercial availability and pricing can vary with quantity and inventory, use the form rather than relying on an archived unit-price reference when preparing a production BOM.
What is the lead time and stock status for MAX232ECPW?
Current stock and lead-time status for MAX232ECPW should be confirmed through the Request a Quote form on this page. Include the required quantity, target delivery date, and intended reel or tube packaging in the request. The manufacturer listing identifies MAX232ECPW as an on-order device, but that designation alone does not establish a current shipment quantity or an order lead time.

Справочные инженерные данные для MAX232ECPW — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX232ECPW when the design needs a compact 16-pin TSSOP RS-232 transceiver with two drivers, two receivers, operation from 4.5V to 5.5V, a 250kbps data rate, and documented IEC 61000-4-2 protection. MAX232EIPWR is a close same-family option for second-source evaluation, but its ordering suffix, temperature grade, and pin details should be checked against the target design. MAX3232ECPW and MAX3232EIPWR may be preferable when the broader MAX3232 family aligns with existing component standardization, provided the required charge-pump capacitors and pin functions match. TRS232EIPWR is a cross-brand candidate for a protected industrial interface, but it should be selected only after its datasheet confirms equivalent pinout, electrical limits, ESD performance, and external capacitor requirements. For any substitution, verify the complete 16-pin footprint, supply decoupling, charge-pump network, operating temperature, and cable-side protection rather than relying only on the RS-232 and package descriptions.

Сравнение с аналогами

Параметр Этот товар MAX232EIPWR MAX3232ECPW MAX3232EIPWR MAX232AEEPE TRS232EIPWR
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP candidate 16-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Nominal Supply Voltage 5V 5V 5V 5V 5V 5V
Maximum Data Rate 250kbps 250kbps 250kbps 250kbps 250kbps 250kbps

Ключевые отличия

  • Documented ESD protection in a compact dual-channel interface (против TRS232EIPWR)
  • High data rate for a single-supply RS-232 transceiver (против MAX232EIPWR)
  • Direct same-footprint sourcing family (против MAX3232ECPW)

Заметки по проектированию

Place the charge-pump capacitors and supply-decoupling capacitor close to their specified pins, keeping the high-current charge-pump loop compact. The MAX232ECPW generates bipolar RS-232 voltage from its 5V supply through switched-capacitor action, so long capacitor traces can increase switching noise and reduce available voltage margin. Follow the manufacturer datasheet capacitor values and component tolerances rather than substituting generic capacitors solely by capacitance rating.

Do not treat the 250kbps rating as a guaranteed communication distance. RS-232 cable capacitance, driver loading, connector construction, grounding, and common-mode noise can reduce practical reliability at higher rates. Test the complete cable and equipment combination under worst-case noise conditions, and avoid relying on software flow control as a substitute for correctly routed handshake signals.

Keep connector-side RS-232 driver and receiver traces physically separated from sensitive analog or high-speed digital nets, and provide a continuous ground reference adjacent to the interface route. Although the device includes IEC 61000-4-2 protection, the protection network is not a substitute for external surge protection where cables extend beyond the enclosure or encounter larger industrial transients.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

IEC 61000-4-2 protection is documented for the device. Other environmental and material-compliance claims were not established from the available product information and are therefore marked unknown.

Данные проверены: 2026-11-13 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX232ECPW datasheet MAX232ECPW pinout MAX232ECPW datasheet pdf MAX232ECPW equivalent MAX232ECPW replacement MAX232ECPW cross reference MAX232ECPW vs MAX232EIPWR MAX232ECPW TSSOP-16 footprint MAX232ECPW application circuit MAX232ECPW price MAX232ECPW stock Texas Instruments MAX232ECPW

Связанные компоненты & термины

Texas Instruments MAX232ECPW MAX232EIPWR MAX3232ECPW MAX3232EIPWR MAX232AEEPE TRS232EIPWR RS-232 transceiver dual driver dual receiver interface transceiver IC serial communication TIA/EIA-232-F TTL logic CMOS logic charge-pump voltage generator 250kbps 4.5V to 5.5V IEC 61000-4-2 electrostatic-discharge protection 16-pin TSSOP TSSOP package family surface mount industrial control data acquisition
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ