MAX3221ECPWE4 - 250kbps RS-232 Transceiver | Texas Instruments
Артикул: MAX3221ECPWE4 ✓ АктивенMAX3221ECPWE4 Обзор
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts received RS-232 levels back into CMOS-compatible logic. In the electronic hierarchy, a transceiver belongs to the interface IC and line-driver/receiver family, where it connects modern digital systems to the voltage, polarity, and noise-immunity characteristics of the RS-232 standard. The MAX3221ECPWE4 is intended for equipment that needs one bidirectional serial channel rather than the multiple channels available from larger transceivers.
Key features include a 3V to 5.5V operating range, operation up to 250kbps, and ±15kV IEC ESD protection. The low-voltage supply capability allows the device to operate directly from 3.3V or 5V system rails. A single channel reduces package size and power requirements when a design does not require multiple RS-232 ports. The integrated driver, receiver, and charge-pump circuitry also simplifies the external interface arrangement.
The MAX3221ECPWE4 combines one RS-232 driver and one receiver in a 16-terminal TSSOP package. Its receiver converts the incoming differential voltage on the RS-232 line into a CMOS-compatible output, while the driver converts a CMOS-compatible input into the electrical levels required by RS-232. The dual charge-pump circuit generates the positive and negative voltage levels used by the driver. According to the Texas Instruments MAX3221 datasheet, the device supports data rates up to 250kbps.
Typical applications include industrial serial interfaces, point-of-sale equipment, instrumentation, data acquisition systems, and embedded systems that require a single RS-232 port. The device is particularly suitable for compact controller boards operating from 3.3V or 5V rails. Because only one channel is included, systems needing several simultaneous RS-232 ports should use a multichannel transceiver instead.
When laying out a design, route the driver output and receiver input to their protected connector-side networks and keep sensitive logic traces away from the exposed RS-232 interface. Use the external components and connector arrangement shown in the manufacturer datasheet for charge-pump capacitors and interface protection. Confirm signal levels, grounding, cable length, and ESD requirements at the connector boundary.
This product record combines the exact ordering information, package details, electrical highlights, verified alternatives, and application guidance needed to evaluate the MAX3221ECPWE4. The comparison section distinguishes same-family and cross-brand drop-in options, while the design notes focus on signal routing, protection, and practical implementation decisions.
Аналоги без доработки для MAX3221ECPWE4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MAX3221ECPWE4 (тот же форм-фактор и посадочное место) — отличается по ESD Protection, Maximum Data Rate, Number of Drivers, Number of Receivers, Supply Voltage Range.
TRS3221ECPWR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX3221CPWE4
✅ Прямая заменаУточнить цену
Открыть даташит →MAX3221CPWRG4
✅ Прямая заменаУточнить цену
Открыть даташит →MAX3221EUE+
✅ Прямая заменаУточнить цену
Открыть даташит →SN65C3221EPWR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX3221ECPWE4 Характеристики
| Product Type | Single-channel RS-232 line driver/receiver |
| Number of Drivers | 1 driver |
| Number of Receivers | 1 receiver |
| Maximum Data Rate | 250kbps |
| Supply Voltage Range | 3V to 5.5V |
| ESD Protection | ±15kV IEC ESD protection |
| Корпус | 16-pin TSSOP |
| Terminal Count | 16 terminals |
| Тип монтажа | Surface mount |
| Temperature Grade | Commercial |
| Ток потребления | 1µA AutoShutdown supply current |
| Power-Saving Feature | AutoShutdown |
| Charge-Pump Circuit | Dual charge-pump circuit |
| Driver Input Logic Level | 0.8V driver and control low-level input voltage |
| Green Product Status | Green product with no Sb or Br |
| RoHS Compliance | Compliant |
Руководство по цоколевке MAX3221ECPWE4 в корпусе 16-pin tssop
Цоколевка для MAX3221ECPWE4 (корпус 16-pin tssop). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для MAX3221ECPWE4.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MAX3221ECPWE4 подходит для 6 применениеs: Industrial Serial Control Interfaces, Point-of-Sale and Retail Equipment, Data Acquisition and Instrumentation, Embedded Service and Maintenance Ports, Security and Access-Control Systems, Communication and Networking Equipment.
Industrial Serial Control Interfaces
The MAX3221ECPWE4 fits industrial controllers that require one RS-232 connection for configuration, testing, or legacy equipment. Its 3V-to-5.5V supply range supports both 3.3V and 5V controller rails, while the 250kbps rate covers conventional serial protocols used by data loggers and service interfaces. The single-driver, single-receiver arrangement minimizes board area compared with a multichannel transceiver. Use the manufacturer's recommended charge-pump capacitors and interface network, and route the RS-232 side toward the connector while separating it from sensitive analog or clock circuitry. The ±15kV IEC ESD protection improves interface resilience, although the completed product still requires appropriate grounding and cable practices.
Рекомендуется
Point-of-Sale and Retail Equipment
The MAX3221ECPWE4 is appropriate for point-of-sale terminals, receipt-printer interfaces, and compact retail peripherals that use a single RS-232 port. Its 16-pin TSSOP package and single-channel architecture conserve PCB area, while operation from 3.3V or 5V supports common embedded-controller platforms. A maximum data rate of 250kbps is sufficient for many peripheral protocols, and AutoShutdown can reduce current demand during inactive periods. Place the transceiver near the external connector, provide a stable common ground, and keep the charge-pump and driver traces away from display, keypad, and communication circuitry. Validate the logic thresholds and connector-side network for the specific peripheral before releasing production hardware.
Рекомендуется
Data Acquisition and Instrumentation
The MAX3221ECPWE4 can provide a single RS-232 command channel for laboratory instruments, data loggers, and measurement equipment. Its 250kbps maximum data rate supports common serial-control and configuration traffic, while ±15kV IEC ESD protection is useful where an instrument may be connected to an external cable. The 3V-to-5.5V supply range allows use with either 3.3V or 5V signal-processing systems. Because this is a single-channel device, choose it when one control port is sufficient; use a multichannel transceiver when several instruments must be connected simultaneously. Follow the datasheet interface topology and verify ground behavior, cable length, and grounding strategy with the complete measurement system.
Рекомендуется
Embedded Service and Maintenance Ports
The MAX3221ECPWE4 is well suited to embedded equipment that exposes a maintenance or service port through RS-232. The 16-pin TSSOP package fits compact controller boards, and the 3V-to-5.5V supply range supports embedded processors operating at 3.3V or 5V. A 250kbps link provides adequate speed for configuration logs, diagnostic commands, and firmware-related service traffic. AutoShutdown helps reduce power use when the service port is not active, making the device suitable for intermittently connected interfaces. Keep the connector entry point isolated from sensitive internal nets, use a low-impedance ground strategy, and verify the receiver threshold against the logic system. Confirm all 16 terminal assignments before considering a same-package substitute.
Рекомендуется
Security and Access-Control Systems
The MAX3221ECPWE4 can serve as a wired RS-232 interface in access-control readers, door controllers, and alarm panels that need a single commissioning or diagnostic connection. Its 3V-to-5.5V operating range supports low-voltage embedded control platforms, and the 250kbps data rate is adequate for configuration and status traffic. The stated ±15kV IEC ESD protection adds valuable robustness when the port connects to an external cable. The single-channel configuration reduces board area in compact enclosures. In a finished security product, maintain a continuous signal ground, place the protection network at the connector boundary, and separate the RS-232 route from sensitive sensor wiring. Confirm the final cable and grounding strategy as part of system-level ESD validation.
Рекомендуется
Communication and Networking Equipment
The MAX3221ECPWE4 is useful in communication equipment that retains a single RS-232 management, diagnostic, or legacy interface. A 250kbps maximum rate is appropriate for configuration consoles and status links, while the 3V-to-5.5V supply range enables integration with modern 3.3V and 5V hardware. The 16-pin TSSOP package allows a compact implementation without adding the area of a multichannel transceiver. For exposed network equipment, place the transceiver near the serial connector, route the driver and receiver paths as a protected interface, and avoid crossing them with sensitive high-speed traces. Use the Texas Instruments application circuit and verify signal levels, common-mode voltage, grounding, and cable length before production release.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MAX3221ECPWE4 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TRS3221ECPWR | MAX3221CPWE4 | MAX3221CPWRG4 | MAX3221EUE+ | SN65C3221EPWR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Maxim Integrated | Texas Instruments |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Device Type | Single-channel RS-232 line driver/receiver | Single-channel RS-232 transceiver | Single-channel MAX3221-family transceiver | Single-channel MAX3221-family transceiver | Single-channel MAX3221-family transceiver | Single-channel RS-232 transceiver |
| Number of Drivers | 1 driver | 1 driver | 1 driver | 1 driver | 1 driver | 1 driver |
| Number of Receivers | 1 receiver | 1 receiver | 1 receiver | 1 receiver | 1 receiver | 1 receiver |
| Supply Voltage Range | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V |
Ключевые отличия
- Direct Texas Instruments pin-compatible replacement (против TRS3221ECPWR)
- Single-channel solution with integrated charge pump (против MAX3232CUE+T)
- Cross-reference match with the same principal protection rating (против SN65C3221EPWR)
Заметки по проектированию
Place the MAX3221ECPWE4 close to the RS-232 connector and route the driver and receiver nets directly toward the protected interface network. Keep charge-pump capacitor connections short and symmetrical, and avoid placing sensitive logic traces beneath or beside the interface section. This arrangement reduces transient-current paths through the logic ground and improves the effectiveness of the device's ±15kV IEC ESD protection.
Do not assume that identical TSSOP-16 packages guarantee interchangeable operation. Before substituting TRS3221ECPWR, MAX3221CPWE4, MAX3221CPWRG4, MAX3221EUE+, or SN65C3221EPWR, compare every pin name, enable threshold, receiver output state, charge-pump capacitor connection, and external-interface component value against the manufacturer datasheets. Pay particular attention to shutdown behavior and logic levels.
Decouple the MAX3221ECPWE4 supply pins with the capacitance and placement specified in the Texas Instruments application circuit. The 3V-to-5.5V supply range supports both 3.3V and 5V systems, but the charge-pump circuit requires clean local power to maintain stable driver output. Use a low-impedance ground connection and avoid sharing narrow return paths with switching regulators or motors.
Treat the RS-232 side as a high-voltage, surge-sensitive interface even though the logic side operates from 3.3V or 5V. Keep the connector return path continuous, terminate or bias unused receiver inputs according to the datasheet, and verify the external series and protection components. The 250kbps maximum rate does not remove the need for controlled impedance and a low-noise reference ground.
Информация о соответствии
The MAX3221 family is identified as a green product with no antimony or bromine. RoHS compliance is confirmed, while REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require manufacturer confirmation for the exact ordering code.