Analog Devices

MAX3232ECUP+ - 1Mbps RS-232 Transceiver | Analog Devices

Артикул: MAX3232ECUP+ ✓ Активен
3.0 V to 5.5 V Vdss Down to 10 nA Id 20-pin TSSOP Package
MOQ: 1 |

MAX3232ECUP+ Обзор

The Analog Devices MAX3232ECUP+ is a low-power, true RS-232 transceiver with two drivers and two receivers, a maximum data rate of 1 Mbps, and a 3.0 V to 5.5 V supply range. It is housed in a 20-pin TSSOP package and provides ±15 kV ESD protection on the serial-port connection pins according to the manufacturer product page.

A true RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 bipolar levels and converts incoming RS-232 signals back into CMOS-compatible logic. Within the interface hierarchy, the MAX3232ECUP+ belongs to the RS-232 transceiver class, which is part of the broader line-driver and line-receiver family within interface ICs. Its internal dual charge pump supports the voltage swings required for true RS-232 communication.

Key features include operation from 3.0 V to 5.5 V, data rates up to 1 Mbps, ±15 kV ESD protection, and a supply current as low as 10 nA. Two transmit channels and two receive channels support full-duplex serial links. The E suffix identifies the enhanced ESD-protected version, while the UP package code corresponds to the 20-pin TSSOP used by this ordering variant.

Technically, the device combines a dual charge-pump circuit with four small charge-pump capacitors, two line drivers, and two line receivers. The charge pump develops positive and negative voltage rails needed by the transmitter outputs, allowing true RS-232 operation from a single low-voltage supply. Receiver inputs provide the electrical boundary between the ±RS-232 signal environment and a host UART operating at CMOS logic levels.

Typical uses include industrial serial consoles, data-acquisition equipment, point-of-sale systems, instrumentation, and embedded control boards. The 1 Mbps capability is useful for links requiring faster transfers than conventional low-speed serial ports, while the 3.0 V minimum supply supports modern 3.3 V systems. For 5 V systems, the same part operates within its stated upper supply limit.

PCB design should place the charge-pump capacitors close to their associated pins and provide a continuous ground return from the interface connector. Keep RS-232 traces away from sensitive analog or high-speed digital nets, use appropriate surge and ESD protection for exposed cables, and validate the external charge-pump capacitor values against the manufacturer datasheet.

This product page combines the manufacturer specifications, package details, pricing channels, replacement analysis, and practical PCB guidance. It also distinguishes genuine same-footprint alternatives from functional substitutes, helping engineers shorten qualification and sourcing work without overlooking charge-pump, ESD, speed, or shutdown differences.

Аналоги без доработки для MAX3232ECUP+ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX3232ECUP+ (тот же форм-фактор и посадочное место) — отличается по Package, ESD Protection, Product Type, Supply Voltage Range, Maximum Data Rate.

Texas Instruments
Package: 16-SSOP, 5.30 mm width
ESD Protection: +/-15 kV terminal-to-terminal
Product Type: RS-232 line driver/receiver transceiver
Сравнить с MAX3232ECUP+ →
Maxim Integrated
Package: 16-pin TSSOP
Сравнить с MAX3232ECUP+ →
Texas Instruments
Package: 16-pin SOIC
ESD Protection: ±15 kV IEC ESD protection
Product Type: Dual RS-232 line driver and receiver
Сравнить с MAX3232ECUP+ →
Analog Devices
ESD Protection: ±15kV
Product Type: RS-232 transceiver
Supply Voltage Range: 3.0V to 5.5V
Сравнить с MAX3232ECUP+ →

MAX3232ECDR

✅ Прямая замена
Texas Instruments
📦 TSSOP-20
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

Уточнить цену

Открыть даташит →

MAX3232CDBR

✅ Прямая замена
Texas Instruments
📦 TSSOP-20
RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · 5 V logic · 300 uA · 0.1 uF

Уточнить цену

Открыть даташит →

MAX3232CUE+

✅ Прямая замена
Maxim Integrated
📦 TSSOP-20
2/2 RS-232 transceiver · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · TTL/CMOS · Dual · 4 capacitors, 0.1 µF each

Уточнить цену

Открыть даташит →

MAX3232EEUP+

✅ Прямая замена
Analog Devices
📦 TSSOP-20
RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · 1Mbps · ±15kV · Down to 10nA · True RS-232

Уточнить цену

Открыть даташит →

MAX3000EEUP+

✅ Прямая замена
📦 TSSOP-20
Same 20-pin TSSOP footprint, but MAX3000 is optimized for lower power and shutdown behavior rather than the MAX3232E 1 Mbps feature set

📋 Справочный аналог (нет в каталоге)

MAX3232ECUP+ Характеристики

Product Type True RS-232 transceiver
Transceiver Configuration 2 transmitters and 2 receivers
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Low-Power Supply Current Down to 10 nA
Number of Drivers 2
Number of Receivers 2
Duplex Mode Full duplex
Charge Pump Dual charge-pump circuit
External Charge-Pump Capacitors 4 capacitors
Корпус 20-pin TSSOP
Тип монтажа Surface mount

Руководство по цоколевке MAX3232ECUP+ в корпусе 20-pin tssop

Цоколевка для MAX3232ECUP+ (корпус 20-pin tssop). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 20-pin tssop для MAX3232ECUP+

Нет подробных данных о распиновке для MAX3232ECUP+.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX3232ECUP+ подходит для 6 применениеs: Industrial Serial Console, Data Acquisition Equipment, Point-of-Sale Terminal, Embedded Instrumentation, Laboratory Test Equipment, Low-Power Communication Module.

🏭

Industrial Serial Console

The MAX3232ECUP+ is suitable for an industrial console or service port because it combines two transmitters, two receivers, operation from 3.0 V to 5.5 V, and data rates up to 1 Mbps. Its true RS-232 interface lets a 3.3 V UART communicate directly with a conventional RS-232 connector while the internal dual charge pump supplies the required bipolar signaling levels. The ±15 kV ESD-protected version adds protection for cable-connected equipment exposed to electrostatic discharge. Use the manufacturer recommended charge-pump capacitors and keep the connector-side ground return continuous to reduce noise and surge-current paths.

📊

Data Acquisition Equipment

The MAX3232ECUP+ can interface a controller or data-acquisition module to a legacy RS-232 instrument that requires true bipolar signaling. The 1 Mbps maximum data rate supports instrument control and burst transfers, while the dual-driver, dual-receiver arrangement allows full-duplex communication over two paths. Operating from 3.0 V to 5.5 V lets the same transceiver serve 3.3 V control hardware and 5 V peripheral equipment. Place the four charge-pump capacitors close to the device, separate the RS-232 routing from sensitive measurement channels, and validate the complete cable and grounding arrangement before field deployment.

🖥️

Point-of-Sale Terminal

The MAX3232ECUP+ provides a compact interface between a point-of-sale controller and an RS-232 peripheral such as a printer, scanner, or customer display. Two receive channels can support a bidirectional control link, and two transmitter channels can serve separate peripheral connections when the system requires full-duplex traffic. Its 3.0 V to 5.5 V supply range supports common embedded logic levels, while operation up to 1 Mbps allows rapid transaction data transfer. The 20-pin TSSOP package keeps the interface compact, but exposed retail equipment requires careful cable protection, ground-return design, and ESD-conscious layout.

🔧

Embedded Instrumentation

The MAX3232ECUP+ fits embedded instrumentation that must communicate with a host over RS-232 while running from a 3.3 V system rail. The low-power capability, which can reach 10 nA under applicable shutdown conditions, is useful in portable or intermittently powered test equipment. The device's true RS-232 outputs and receivers eliminate the need for external level-shifting circuitry on a conventional serial link. Use the exact suffix data sheet to confirm the operating mode, and ensure the charge-pump network follows the prescribed capacitor values and placement to avoid output ripple or startup problems.

📟

Laboratory Test Equipment

The MAX3232ECUP+ is appropriate for laboratory instruments that exchange commands and measurement data with a computer or controller over RS-232. The 1 Mbps capability supports faster command responses and data transfers, while ±15 kV ESD protection strengthens the interface against charged cables and operator-contact events. Two transmitters and two receivers provide enough channels for full-duplex instrument communication. In precision equipment, isolate the RS-232 traces from analog inputs, maintain a low-impedance ground reference, and follow the manufacturer layout to prevent charge-pump ripple from affecting measured signals.

🧩

Low-Power Communication Module

The MAX3232ECUP+ can provide an RS-232 connection for a low-power embedded module that occasionally communicates with a service port. Its supply range includes 3.3 V operation, and the low-power rating can extend to 10 nA when the relevant shutdown state is used. The true RS-232 interface remains compatible with legacy service equipment while avoiding external negative-supply circuitry. Qualification should include checking whether the selected MAX3232E ordering code offers the required shutdown and wake behavior. Keep the interface enabled only when needed, and verify startup timing across the full system power sequence.

What are the key specifications of MAX3232ECUP+ that engineers should know?
The MAX3232ECUP+ is a 3.0 V to 5.5 V true RS-232 transceiver with two transmitters, two receivers, operation up to 1 Mbps, and ±15 kV ESD protection. According to the Analog Devices MAX3232E product information, the device uses a dual charge pump and four small external charge-pump capacitors. It is offered in a 20-pin TSSOP package and can support full-duplex serial communication from a single 3.3 V or 5 V supply. The low-power operating current can fall to 10 nA, making the device suitable for both continuously powered equipment and low-duty-cycle links.
What is the operating voltage of MAX3232ECUP+?
The MAX3232ECUP+ operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232E product page, this range supports both 3.3 V and 5 V systems without requiring a separate negative supply at the IC. Its internal dual charge pump generates the positive and negative voltages required by the true RS-232 transmitter outputs. Keep the supply within the stated limits and follow the manufacturer datasheet for bypass-capacitor selection and power sequencing.
How fast can MAX3232ECUP+ transmit RS-232 data?
The MAX3232ECUP+ supports RS-232 data rates up to 1 Mbps. The Analog Devices MAX3232E product information identifies the device as a true RS-232 transceiver rated for operation up to 1 Mbps, with two drivers and two receivers. This speed is useful for data acquisition, embedded instrumentation, and industrial control links that need more throughput than a low-speed serial connection. Actual link performance also depends on cable length, termination, signal integrity, and the connected UART.
Where can I download the MAX3232ECUP+ datasheet PDF?
The MAX3232ECUP+ datasheet is available through the official Analog Devices MAX3232E product page at https://www.analog.com/en/products/max3232e.html. The manufacturer page provides the MAX3232E data sheet and supporting product information. Use the manufacturer document for the authoritative pin descriptions, electrical limits, recommended charge-pump capacitor values, and operating characteristics. The device is listed in production by the manufacturer, and the MAX3232E family is identified as a production product.
Where can I find the MAX3232ECUP+ pinout and TSSOP-20 connections?
Use the pin-description table and package drawing in the Analog Devices MAX3232E manufacturer datasheet for the MAX3232ECUP+ TSSOP-20 connections. The public part information identifies a 20-pin TSSOP package with a dual charge pump, two transmitters, and two receivers. Assign PCB nets directly from the datasheet pin table rather than inferring connections from a generic MAX3232 diagram, because package variants can expose the charge-pump and receiver pins differently. Keep the exposed connector-side return path and charge-pump capacitor connections consistent with the recommended layout.
Where to buy MAX3232ECUP+ online?
Use the Request a Quote form on this page to request MAX3232ECUP+ availability, pricing, and lead time. The form connects the request directly with XAIPART purchasing without relying on a static marketplace figure. The manufacturer lists the MAX3232E family as a production product, and the component is specifically identified as the MAX3232ECUP+ 20-pin TSSOP ordering option. Confirm the suffix, reel configuration, and quantity before releasing a purchase order.
What is the price of MAX3232ECUP+?
The current unit price for MAX3232ECUP+ is generated through the Request a Quote form on this page. This page does not present a static price figure because commercial terms, quantity, and availability can change independently of the technical data. Submit the required quantity and target package or reel details with the quote request so purchasing can return an accurate offer for the exact MAX3232ECUP+ ordering code.
What is the lead time for MAX3232ECUP+?
Request the current MAX3232ECUP+ lead time using the Request a Quote form on this page. The manufacturer identifies the MAX3232E family as a production product, but a production status does not by itself establish a delivery interval for every quantity and package configuration. Include the required order quantity, shipment destination, and whether reel or cut-tape packaging is needed when requesting the quotation.
Is MAX3232ECUP+ in stock?
Current MAX3232ECUP+ stock should be confirmed through the Request a Quote form on this page. The manufacturer lists the MAX3232E family as a production product, while the exact suffix, package, quantity, and delivery schedule must still be matched to the purchasing request. Use the quote form rather than relying on a generic family-level availability statement, since another MAX3232 variant may have different orderable packaging or inventory status.
What can replace MAX3232ECUP+ as a drop-in part?
MAX3232ECDR, MAX3232CDBR, MAX3232CUE+, MAX3232EEUP+, and MAX3000EEUP+ are the closest same-footprint candidates identified for this part, but each has functional or electrical distinctions that must be checked. The MAX3232E variants share the 20-pin TSSOP format and true RS-232 transceiver function, while the MAX3000 family adds low-power features. Confirm the transmit and receive channel counts, data rate, ESD rating, shutdown behavior, and exact pin mapping in the manufacturer datasheet before substituting any candidate.
MAX3232ECUP+ vs MAX3232ECDR - which is better for an industrial serial link?
MAX3232ECUP+ is the preferred choice when the design specifically requires the 1 Mbps, ±15 kV ESD-protected MAX3232E configuration in a 20-pin TSSOP package. MAX3232ECDR is a same-brand, same-footprint alternative for footprint reuse, but the ordering variants must be checked for their specific data-rate and shutdown ratings. The Analog Devices MAX3232E family information confirms true RS-232 operation, 3.0 V to 5.5 V supply, and enhanced ESD protection. Select the exact suffix that meets all link-speed, power-management, and lifecycle requirements.
When should I choose MAX3232ECUP+ over MAX3232CDBR?
Choose MAX3232ECUP+ when the interface benefits from the enhanced MAX3232E feature set, including operation up to 1 Mbps and ±15 kV ESD protection. MAX3232CDBR is useful when its corresponding data rate, power-management, and ESD ratings satisfy the design and the existing PCB is already qualified around that variant. The MAX3232ECUP+ and MAX3232CDBR share the same 20-pin TSSOP format, but package compatibility alone does not establish that every operating limit is equivalent. Compare the manufacturer data sheets for the exact suffix and validate shutdown timing.
Is MAX3232EEUP+ the same as MAX3232ECUP+?
MAX3232EEUP+ is a close same-brand alternative, but it should not be treated as identical without checking the ordering-code functions. The Analog Devices MAX3232E family includes the enhanced ESD-protected MAX3232ECUP+, while the EEUP+ ordering code may identify a different configuration within the family. Both use the 20-pin TSSOP format, making them useful for footprint-focused review. Verify data rate, shutdown behavior, channel implementation, and every datasheet electrical limit before approving MAX3232EEUP+ as the replacement.
What is the best Analog Devices equivalent for MAX3232ECUP+?
MAX3232EEUP+ is the closest same-brand alternative for a TSSOP-20 footprint review, followed by MAX3232ECDR and MAX3232CUE+. The MAX3232ECUP+ itself is the enhanced 1 Mbps, ±15 kV ESD-protected configuration, so the best replacement depends on whether the original design uses shutdown, automatic shutdown, or a specific maximum data rate. Compare the exact suffix data sheets and confirm pin functions before production release. Packaging-code variants alone are not substantive alternatives and should not be used simply to change the reel marking.
Does MAX3232ECUP+ need external charge-pump capacitors?
Yes, the MAX3232ECUP+ uses four small external capacitors with its dual charge-pump circuit. According to the Analog Devices MAX3232E product information, the device combines two line drivers, two line receivers, and a dual charge pump that requires four small charge-pump capacitors. Select the capacitor values and tolerances specified by the manufacturer datasheet, account for the effective DC-bias derating of ceramic capacitors, and place each capacitor close to the corresponding pins. Follow the recommended layout to limit pump ripple and maintain reliable RS-232 output levels.

Справочные инженерные данные для MAX3232ECUP+ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX3232ECUP+ when the design needs a 3.0 V to 5.5 V true RS-232 interface, operation up to 1 Mbps, and ±15 kV ESD protection in a 20-pin TSSOP footprint. MAX3232ECDR is the first same-brand alternative to evaluate for PCB reuse, provided its exact data-rate and shutdown limits meet the design. MAX3232CDBR and MAX3232CUE+ are appropriate only after checking their data rate, ESD rating, and power-management functions. MAX3232EEUP+ may suit a closely related configuration, but its ordering-code functions must be verified. MAX3000EEUP+ makes more sense when low-power behavior matters more than the MAX3232E 1 Mbps feature set. For all candidates, compare the manufacturer pin tables and electrical limits rather than relying on package similarity alone.

Сравнение с аналогами

Параметр Этот товар MAX3232ECDR MAX3232CDBR MAX3232CUE+ MAX3232EEUP+ MAX3000EEUP+
Package TSSOP-20 TSSOP-20 TSSOP-20 TSSOP-20 TSSOP-20 TSSOP-20
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices

Ключевые отличия

  • Higher stated maximum data rate (против MAX3232CDBR)
  • Enhanced ESD protection in the selected suffix (против MAX3232CUE+)
  • Single 3.0 V to 5.5 V supply with true RS-232 signaling (против MAX3000EEUP+)

Заметки по проектированию

Place the four external charge-pump capacitors close to their corresponding MAX3232ECUP+ pins and use the values and tolerances specified by the Analog Devices datasheet. Ceramic capacitor effective capacitance can fall substantially with DC bias, so validate the effective value rather than relying only on the printed capacitance. Keep charge-pump current loops compact and provide a low-impedance ground reference near the device. This layout discipline reduces charge-pump ripple, startup variation, and emissions that could disturb nearby circuitry.

Route RS-232 driver and receiver nets away from sensitive analog inputs, clock signals, and high-speed digital traces wherever possible. Keep the connector-side ground return continuous and short so surge and ESD currents do not pass through sensitive system ground paths. Use controlled geometry for the cable interface and avoid long parallel runs with unrelated nets. Although the device provides ±15 kV ESD protection, that rating does not replace careful placement, grounding, or external surge-protection design for long or exposed cables.

Decouple the 3.0 V to 5.5 V supply with capacitors selected according to the manufacturer layout and stability guidance. Check the exact suffix data sheet before assigning the device's shutdown pins because shutdown topology and timing can vary across MAX3232E ordering codes. When power is switched intermittently, verify that the UART remains in a defined logic state during startup and shutdown. The low-power specification of down to 10 nA applies only under its defined conditions and should not be interpreted as the active operating current.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No definitive compliance declaration for the exact MAX3232ECUP+ ordering code appears in the retrieved manufacturer or distributor information. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product declaration before procurement.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX3232ECUP+ datasheet MAX3232ECUP+ pinout MAX3232ECUP+ datasheet pdf MAX3232ECUP+ equivalent MAX3232ECUP+ replacement MAX3232ECUP+ cross reference MAX3232ECUP+ vs MAX3232ECDR MAX3232ECUP+ footprint MAX3232ECUP+ 1Mbps RS-232 MAX3232ECUP+ TSSOP-20 Analog Devices MAX3232ECUP+ MAX3232ECUP+ price MAX3232ECUP+ stock MAX3232ECUP+ industrial serial

Связанные компоненты & термины

Analog Devices MAX3232ECUP+ MAX3232ECDR MAX3232CDBR MAX3232CUE+ MAX3232EEUP+ MAX3000EEUP+ RS-232 transceiver true RS-232 interface interface IC line driver line receiver dual charge pump UART full-duplex serial communication TSSOP-20 TSSOP package family surface-mount package ESD protection charge-pump capacitor industrial serial communication data acquisition point-of-sale terminal laboratory instrumentation 3.3 V logic
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ