MAX3232ECUP+ - 1Mbps RS-232 Transceiver | Analog Devices
MPN: MAX3232ECUP+ ✓ 啟用中MAX3232ECUP+ 概覽
A true RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 bipolar levels and converts incoming RS-232 signals back into CMOS-compatible logic. Within the interface hierarchy, the MAX3232ECUP+ belongs to the RS-232 transceiver class, which is part of the broader line-driver and line-receiver family within interface ICs. Its internal dual charge pump supports the voltage swings required for true RS-232 communication.
Key features include operation from 3.0 V to 5.5 V, data rates up to 1 Mbps, ±15 kV ESD protection, and a supply current as low as 10 nA. Two transmit channels and two receive channels support full-duplex serial links. The E suffix identifies the enhanced ESD-protected version, while the UP package code corresponds to the 20-pin TSSOP used by this ordering variant.
Technically, the device combines a dual charge-pump circuit with four small charge-pump capacitors, two line drivers, and two line receivers. The charge pump develops positive and negative voltage rails needed by the transmitter outputs, allowing true RS-232 operation from a single low-voltage supply. Receiver inputs provide the electrical boundary between the ±RS-232 signal environment and a host UART operating at CMOS logic levels.
Typical uses include industrial serial consoles, data-acquisition equipment, point-of-sale systems, instrumentation, and embedded control boards. The 1 Mbps capability is useful for links requiring faster transfers than conventional low-speed serial ports, while the 3.0 V minimum supply supports modern 3.3 V systems. For 5 V systems, the same part operates within its stated upper supply limit.
PCB design should place the charge-pump capacitors close to their associated pins and provide a continuous ground return from the interface connector. Keep RS-232 traces away from sensitive analog or high-speed digital nets, use appropriate surge and ESD protection for exposed cables, and validate the external charge-pump capacitor values against the manufacturer datasheet.
This product page combines the manufacturer specifications, package details, pricing channels, replacement analysis, and practical PCB guidance. It also distinguishes genuine same-footprint alternatives from functional substitutes, helping engineers shorten qualification and sourcing work without overlooking charge-pump, ESD, speed, or shutdown differences.
直接替換替代品,適用於 MAX3232ECUP+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3232ECUP+ (相同外形與佔位) — 差異在於 Package, ESD Protection, Product Type, Supply Voltage Range, Maximum Data Rate.
MAX3232ECDR
✅ 直接替換聯絡詢價
查看資料表 →MAX3232CDBR
✅ 直接替換聯絡詢價
查看資料表 →MAX3232CUE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3232EEUP+
✅ 直接替換聯絡詢價
查看資料表 →MAX3000EEUP+
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3232ECUP+ 規格
| Product Type | True RS-232 transceiver |
| Transceiver Configuration | 2 transmitters and 2 receivers |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| ESD Protection | ±15 kV |
| Low-Power Supply Current | Down to 10 nA |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Duplex Mode | Full duplex |
| Charge Pump | Dual charge-pump circuit |
| External Charge-Pump Capacitors | 4 capacitors |
| 封裝 | 20-pin TSSOP |
| 安裝類型 | Surface mount |
MAX3232ECUP+ 20-pin tssop 腳位配置指南
MAX3232ECUP+(20-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3232ECUP+.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3232ECUP+ 適用於 6 應用s: Industrial Serial Console, Data Acquisition Equipment, Point-of-Sale Terminal, Embedded Instrumentation, Laboratory Test Equipment, Low-Power Communication Module.
Industrial Serial Console
The MAX3232ECUP+ is suitable for an industrial console or service port because it combines two transmitters, two receivers, operation from 3.0 V to 5.5 V, and data rates up to 1 Mbps. Its true RS-232 interface lets a 3.3 V UART communicate directly with a conventional RS-232 connector while the internal dual charge pump supplies the required bipolar signaling levels. The ±15 kV ESD-protected version adds protection for cable-connected equipment exposed to electrostatic discharge. Use the manufacturer recommended charge-pump capacitors and keep the connector-side ground return continuous to reduce noise and surge-current paths.
推薦
Data Acquisition Equipment
The MAX3232ECUP+ can interface a controller or data-acquisition module to a legacy RS-232 instrument that requires true bipolar signaling. The 1 Mbps maximum data rate supports instrument control and burst transfers, while the dual-driver, dual-receiver arrangement allows full-duplex communication over two paths. Operating from 3.0 V to 5.5 V lets the same transceiver serve 3.3 V control hardware and 5 V peripheral equipment. Place the four charge-pump capacitors close to the device, separate the RS-232 routing from sensitive measurement channels, and validate the complete cable and grounding arrangement before field deployment.
推薦
Point-of-Sale Terminal
The MAX3232ECUP+ provides a compact interface between a point-of-sale controller and an RS-232 peripheral such as a printer, scanner, or customer display. Two receive channels can support a bidirectional control link, and two transmitter channels can serve separate peripheral connections when the system requires full-duplex traffic. Its 3.0 V to 5.5 V supply range supports common embedded logic levels, while operation up to 1 Mbps allows rapid transaction data transfer. The 20-pin TSSOP package keeps the interface compact, but exposed retail equipment requires careful cable protection, ground-return design, and ESD-conscious layout.
推薦
Embedded Instrumentation
The MAX3232ECUP+ fits embedded instrumentation that must communicate with a host over RS-232 while running from a 3.3 V system rail. The low-power capability, which can reach 10 nA under applicable shutdown conditions, is useful in portable or intermittently powered test equipment. The device's true RS-232 outputs and receivers eliminate the need for external level-shifting circuitry on a conventional serial link. Use the exact suffix data sheet to confirm the operating mode, and ensure the charge-pump network follows the prescribed capacitor values and placement to avoid output ripple or startup problems.
推薦
Laboratory Test Equipment
The MAX3232ECUP+ is appropriate for laboratory instruments that exchange commands and measurement data with a computer or controller over RS-232. The 1 Mbps capability supports faster command responses and data transfers, while ±15 kV ESD protection strengthens the interface against charged cables and operator-contact events. Two transmitters and two receivers provide enough channels for full-duplex instrument communication. In precision equipment, isolate the RS-232 traces from analog inputs, maintain a low-impedance ground reference, and follow the manufacturer layout to prevent charge-pump ripple from affecting measured signals.
推薦
Low-Power Communication Module
The MAX3232ECUP+ can provide an RS-232 connection for a low-power embedded module that occasionally communicates with a service port. Its supply range includes 3.3 V operation, and the low-power rating can extend to 10 nA when the relevant shutdown state is used. The true RS-232 interface remains compatible with legacy service equipment while avoiding external negative-supply circuitry. Qualification should include checking whether the selected MAX3232E ordering code offers the required shutdown and wake behavior. Keep the interface enabled only when needed, and verify startup timing across the full system power sequence.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3232ECUP+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3232ECDR | MAX3232CDBR | MAX3232CUE+ | MAX3232EEUP+ | MAX3000EEUP+ |
|---|---|---|---|---|---|---|
| Package | TSSOP-20 | TSSOP-20 | TSSOP-20 | TSSOP-20 | TSSOP-20 | TSSOP-20 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
主要差異化特點
- Higher stated maximum data rate (對比MAX3232CDBR)
- Enhanced ESD protection in the selected suffix (對比MAX3232CUE+)
- Single 3.0 V to 5.5 V supply with true RS-232 signaling (對比MAX3000EEUP+)
設計說明
Place the four external charge-pump capacitors close to their corresponding MAX3232ECUP+ pins and use the values and tolerances specified by the Analog Devices datasheet. Ceramic capacitor effective capacitance can fall substantially with DC bias, so validate the effective value rather than relying only on the printed capacitance. Keep charge-pump current loops compact and provide a low-impedance ground reference near the device. This layout discipline reduces charge-pump ripple, startup variation, and emissions that could disturb nearby circuitry.
Route RS-232 driver and receiver nets away from sensitive analog inputs, clock signals, and high-speed digital traces wherever possible. Keep the connector-side ground return continuous and short so surge and ESD currents do not pass through sensitive system ground paths. Use controlled geometry for the cable interface and avoid long parallel runs with unrelated nets. Although the device provides ±15 kV ESD protection, that rating does not replace careful placement, grounding, or external surge-protection design for long or exposed cables.
Decouple the 3.0 V to 5.5 V supply with capacitors selected according to the manufacturer layout and stability guidance. Check the exact suffix data sheet before assigning the device's shutdown pins because shutdown topology and timing can vary across MAX3232E ordering codes. When power is switched intermittently, verify that the UART remains in a defined logic state during startup and shutdown. The low-power specification of down to 10 nA applies only under its defined conditions and should not be interpreted as the active operating current.
合規資訊
No definitive compliance declaration for the exact MAX3232ECUP+ ordering code appears in the retrieved manufacturer or distributor information. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product declaration before procurement.