Analog Devices

MAX3232ECUP+ - 1Mbps RS-232 Transceiver | Analog Devices

料号: MAX3232ECUP+ ✓ 量产中
3.0 V to 5.5 V Vdss Down to 10 nA Id 20-pin TSSOP Package
最小起订量: 1 |

MAX3232ECUP+ 概述

The Analog Devices MAX3232ECUP+ is a low-power, true RS-232 transceiver with two drivers and two receivers, a maximum data rate of 1 Mbps, and a 3.0 V to 5.5 V supply range. It is housed in a 20-pin TSSOP package and provides ±15 kV ESD protection on the serial-port connection pins according to the manufacturer product page.

A true RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 bipolar levels and converts incoming RS-232 signals back into CMOS-compatible logic. Within the interface hierarchy, the MAX3232ECUP+ belongs to the RS-232 transceiver class, which is part of the broader line-driver and line-receiver family within interface ICs. Its internal dual charge pump supports the voltage swings required for true RS-232 communication.

Key features include operation from 3.0 V to 5.5 V, data rates up to 1 Mbps, ±15 kV ESD protection, and a supply current as low as 10 nA. Two transmit channels and two receive channels support full-duplex serial links. The E suffix identifies the enhanced ESD-protected version, while the UP package code corresponds to the 20-pin TSSOP used by this ordering variant.

Technically, the device combines a dual charge-pump circuit with four small charge-pump capacitors, two line drivers, and two line receivers. The charge pump develops positive and negative voltage rails needed by the transmitter outputs, allowing true RS-232 operation from a single low-voltage supply. Receiver inputs provide the electrical boundary between the ±RS-232 signal environment and a host UART operating at CMOS logic levels.

Typical uses include industrial serial consoles, data-acquisition equipment, point-of-sale systems, instrumentation, and embedded control boards. The 1 Mbps capability is useful for links requiring faster transfers than conventional low-speed serial ports, while the 3.0 V minimum supply supports modern 3.3 V systems. For 5 V systems, the same part operates within its stated upper supply limit.

PCB design should place the charge-pump capacitors close to their associated pins and provide a continuous ground return from the interface connector. Keep RS-232 traces away from sensitive analog or high-speed digital nets, use appropriate surge and ESD protection for exposed cables, and validate the external charge-pump capacitor values against the manufacturer datasheet.

This product page combines the manufacturer specifications, package details, pricing channels, replacement analysis, and practical PCB guidance. It also distinguishes genuine same-footprint alternatives from functional substitutes, helping engineers shorten qualification and sourcing work without overlooking charge-pump, ESD, speed, or shutdown differences.

直接替换替代料: MAX3232ECUP+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MAX3232ECUP+ (相同外形与封装尺寸) ——差异在于 Package, ESD Protection, Product Type, Supply Voltage Range, Maximum Data Rate.

Texas Instruments
Package: 16-SSOP, 5.30 mm width
ESD Protection: +/-15 kV terminal-to-terminal
Product Type: RS-232 line driver/receiver transceiver
对比 MAX3232ECUP+ →
Maxim Integrated
Package: 16-pin TSSOP
对比 MAX3232ECUP+ →
Texas Instruments
Package: 16-pin SOIC
ESD Protection: ±15 kV IEC ESD protection
Product Type: Dual RS-232 line driver and receiver
对比 MAX3232ECUP+ →
Analog Devices
ESD Protection: ±15kV
Product Type: RS-232 transceiver
Supply Voltage Range: 3.0V to 5.5V
对比 MAX3232ECUP+ →

MAX3232ECDR

✅ 直接替换
Texas Instruments
📦 TSSOP-20
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

联系询价

查看数据手册 →

MAX3232CDBR

✅ 直接替换
Texas Instruments
📦 TSSOP-20
RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · 5 V logic · 300 uA · 0.1 uF

联系询价

查看数据手册 →

MAX3232CUE+

✅ 直接替换
Maxim Integrated
📦 TSSOP-20
2/2 RS-232 transceiver · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · TTL/CMOS · Dual · 4 capacitors, 0.1 µF each

联系询价

查看数据手册 →

MAX3232EEUP+

✅ 直接替换
Analog Devices
📦 TSSOP-20
RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · 1Mbps · ±15kV · Down to 10nA · True RS-232

联系询价

查看数据手册 →

MAX3000EEUP+

✅ 直接替换
📦 TSSOP-20
Same 20-pin TSSOP footprint, but MAX3000 is optimized for lower power and shutdown behavior rather than the MAX3232E 1 Mbps feature set

📋 参考替代料(不在目录中)

MAX3232ECUP+ 规格参数

Product Type True RS-232 transceiver
Transceiver Configuration 2 transmitters and 2 receivers
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Low-Power Supply Current Down to 10 nA
Number of Drivers 2
Number of Receivers 2
Duplex Mode Full duplex
Charge Pump Dual charge-pump circuit
External Charge-Pump Capacitors 4 capacitors
封装 20-pin TSSOP
安装类型 Surface mount

MAX3232ECUP+ 20-pin tssop 引脚配置指南

MAX3232ECUP+(20-pin tssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX3232ECUP+ 的 20-pin tssop 封装引脚图

暂无详细引脚数据: MAX3232ECUP+.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX3232ECUP+ 适用于 6 应用s: Industrial Serial Console, Data Acquisition Equipment, Point-of-Sale Terminal, Embedded Instrumentation, Laboratory Test Equipment, Low-Power Communication Module.

🏭

Industrial Serial Console

The MAX3232ECUP+ is suitable for an industrial console or service port because it combines two transmitters, two receivers, operation from 3.0 V to 5.5 V, and data rates up to 1 Mbps. Its true RS-232 interface lets a 3.3 V UART communicate directly with a conventional RS-232 connector while the internal dual charge pump supplies the required bipolar signaling levels. The ±15 kV ESD-protected version adds protection for cable-connected equipment exposed to electrostatic discharge. Use the manufacturer recommended charge-pump capacitors and keep the connector-side ground return continuous to reduce noise and surge-current paths.

📊

Data Acquisition Equipment

The MAX3232ECUP+ can interface a controller or data-acquisition module to a legacy RS-232 instrument that requires true bipolar signaling. The 1 Mbps maximum data rate supports instrument control and burst transfers, while the dual-driver, dual-receiver arrangement allows full-duplex communication over two paths. Operating from 3.0 V to 5.5 V lets the same transceiver serve 3.3 V control hardware and 5 V peripheral equipment. Place the four charge-pump capacitors close to the device, separate the RS-232 routing from sensitive measurement channels, and validate the complete cable and grounding arrangement before field deployment.

🖥️

Point-of-Sale Terminal

The MAX3232ECUP+ provides a compact interface between a point-of-sale controller and an RS-232 peripheral such as a printer, scanner, or customer display. Two receive channels can support a bidirectional control link, and two transmitter channels can serve separate peripheral connections when the system requires full-duplex traffic. Its 3.0 V to 5.5 V supply range supports common embedded logic levels, while operation up to 1 Mbps allows rapid transaction data transfer. The 20-pin TSSOP package keeps the interface compact, but exposed retail equipment requires careful cable protection, ground-return design, and ESD-conscious layout.

🔧

Embedded Instrumentation

The MAX3232ECUP+ fits embedded instrumentation that must communicate with a host over RS-232 while running from a 3.3 V system rail. The low-power capability, which can reach 10 nA under applicable shutdown conditions, is useful in portable or intermittently powered test equipment. The device's true RS-232 outputs and receivers eliminate the need for external level-shifting circuitry on a conventional serial link. Use the exact suffix data sheet to confirm the operating mode, and ensure the charge-pump network follows the prescribed capacitor values and placement to avoid output ripple or startup problems.

📟

Laboratory Test Equipment

The MAX3232ECUP+ is appropriate for laboratory instruments that exchange commands and measurement data with a computer or controller over RS-232. The 1 Mbps capability supports faster command responses and data transfers, while ±15 kV ESD protection strengthens the interface against charged cables and operator-contact events. Two transmitters and two receivers provide enough channels for full-duplex instrument communication. In precision equipment, isolate the RS-232 traces from analog inputs, maintain a low-impedance ground reference, and follow the manufacturer layout to prevent charge-pump ripple from affecting measured signals.

🧩

Low-Power Communication Module

The MAX3232ECUP+ can provide an RS-232 connection for a low-power embedded module that occasionally communicates with a service port. Its supply range includes 3.3 V operation, and the low-power rating can extend to 10 nA when the relevant shutdown state is used. The true RS-232 interface remains compatible with legacy service equipment while avoiding external negative-supply circuitry. Qualification should include checking whether the selected MAX3232E ordering code offers the required shutdown and wake behavior. Keep the interface enabled only when needed, and verify startup timing across the full system power sequence.

What are the key specifications of MAX3232ECUP+ that engineers should know?
The MAX3232ECUP+ is a 3.0 V to 5.5 V true RS-232 transceiver with two transmitters, two receivers, operation up to 1 Mbps, and ±15 kV ESD protection. According to the Analog Devices MAX3232E product information, the device uses a dual charge pump and four small external charge-pump capacitors. It is offered in a 20-pin TSSOP package and can support full-duplex serial communication from a single 3.3 V or 5 V supply. The low-power operating current can fall to 10 nA, making the device suitable for both continuously powered equipment and low-duty-cycle links.
What is the operating voltage of MAX3232ECUP+?
The MAX3232ECUP+ operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232E product page, this range supports both 3.3 V and 5 V systems without requiring a separate negative supply at the IC. Its internal dual charge pump generates the positive and negative voltages required by the true RS-232 transmitter outputs. Keep the supply within the stated limits and follow the manufacturer datasheet for bypass-capacitor selection and power sequencing.
How fast can MAX3232ECUP+ transmit RS-232 data?
The MAX3232ECUP+ supports RS-232 data rates up to 1 Mbps. The Analog Devices MAX3232E product information identifies the device as a true RS-232 transceiver rated for operation up to 1 Mbps, with two drivers and two receivers. This speed is useful for data acquisition, embedded instrumentation, and industrial control links that need more throughput than a low-speed serial connection. Actual link performance also depends on cable length, termination, signal integrity, and the connected UART.
Where can I download the MAX3232ECUP+ datasheet PDF?
The MAX3232ECUP+ datasheet is available through the official Analog Devices MAX3232E product page at https://www.analog.com/en/products/max3232e.html. The manufacturer page provides the MAX3232E data sheet and supporting product information. Use the manufacturer document for the authoritative pin descriptions, electrical limits, recommended charge-pump capacitor values, and operating characteristics. The device is listed in production by the manufacturer, and the MAX3232E family is identified as a production product.
Where can I find the MAX3232ECUP+ pinout and TSSOP-20 connections?
Use the pin-description table and package drawing in the Analog Devices MAX3232E manufacturer datasheet for the MAX3232ECUP+ TSSOP-20 connections. The public part information identifies a 20-pin TSSOP package with a dual charge pump, two transmitters, and two receivers. Assign PCB nets directly from the datasheet pin table rather than inferring connections from a generic MAX3232 diagram, because package variants can expose the charge-pump and receiver pins differently. Keep the exposed connector-side return path and charge-pump capacitor connections consistent with the recommended layout.
Where to buy MAX3232ECUP+ online?
Use the Request a Quote form on this page to request MAX3232ECUP+ availability, pricing, and lead time. The form connects the request directly with XAIPART purchasing without relying on a static marketplace figure. The manufacturer lists the MAX3232E family as a production product, and the component is specifically identified as the MAX3232ECUP+ 20-pin TSSOP ordering option. Confirm the suffix, reel configuration, and quantity before releasing a purchase order.
What is the price of MAX3232ECUP+?
The current unit price for MAX3232ECUP+ is generated through the Request a Quote form on this page. This page does not present a static price figure because commercial terms, quantity, and availability can change independently of the technical data. Submit the required quantity and target package or reel details with the quote request so purchasing can return an accurate offer for the exact MAX3232ECUP+ ordering code.
What is the lead time for MAX3232ECUP+?
Request the current MAX3232ECUP+ lead time using the Request a Quote form on this page. The manufacturer identifies the MAX3232E family as a production product, but a production status does not by itself establish a delivery interval for every quantity and package configuration. Include the required order quantity, shipment destination, and whether reel or cut-tape packaging is needed when requesting the quotation.
Is MAX3232ECUP+ in stock?
Current MAX3232ECUP+ stock should be confirmed through the Request a Quote form on this page. The manufacturer lists the MAX3232E family as a production product, while the exact suffix, package, quantity, and delivery schedule must still be matched to the purchasing request. Use the quote form rather than relying on a generic family-level availability statement, since another MAX3232 variant may have different orderable packaging or inventory status.
What can replace MAX3232ECUP+ as a drop-in part?
MAX3232ECDR, MAX3232CDBR, MAX3232CUE+, MAX3232EEUP+, and MAX3000EEUP+ are the closest same-footprint candidates identified for this part, but each has functional or electrical distinctions that must be checked. The MAX3232E variants share the 20-pin TSSOP format and true RS-232 transceiver function, while the MAX3000 family adds low-power features. Confirm the transmit and receive channel counts, data rate, ESD rating, shutdown behavior, and exact pin mapping in the manufacturer datasheet before substituting any candidate.
MAX3232ECUP+ vs MAX3232ECDR - which is better for an industrial serial link?
MAX3232ECUP+ is the preferred choice when the design specifically requires the 1 Mbps, ±15 kV ESD-protected MAX3232E configuration in a 20-pin TSSOP package. MAX3232ECDR is a same-brand, same-footprint alternative for footprint reuse, but the ordering variants must be checked for their specific data-rate and shutdown ratings. The Analog Devices MAX3232E family information confirms true RS-232 operation, 3.0 V to 5.5 V supply, and enhanced ESD protection. Select the exact suffix that meets all link-speed, power-management, and lifecycle requirements.
When should I choose MAX3232ECUP+ over MAX3232CDBR?
Choose MAX3232ECUP+ when the interface benefits from the enhanced MAX3232E feature set, including operation up to 1 Mbps and ±15 kV ESD protection. MAX3232CDBR is useful when its corresponding data rate, power-management, and ESD ratings satisfy the design and the existing PCB is already qualified around that variant. The MAX3232ECUP+ and MAX3232CDBR share the same 20-pin TSSOP format, but package compatibility alone does not establish that every operating limit is equivalent. Compare the manufacturer data sheets for the exact suffix and validate shutdown timing.
Is MAX3232EEUP+ the same as MAX3232ECUP+?
MAX3232EEUP+ is a close same-brand alternative, but it should not be treated as identical without checking the ordering-code functions. The Analog Devices MAX3232E family includes the enhanced ESD-protected MAX3232ECUP+, while the EEUP+ ordering code may identify a different configuration within the family. Both use the 20-pin TSSOP format, making them useful for footprint-focused review. Verify data rate, shutdown behavior, channel implementation, and every datasheet electrical limit before approving MAX3232EEUP+ as the replacement.
What is the best Analog Devices equivalent for MAX3232ECUP+?
MAX3232EEUP+ is the closest same-brand alternative for a TSSOP-20 footprint review, followed by MAX3232ECDR and MAX3232CUE+. The MAX3232ECUP+ itself is the enhanced 1 Mbps, ±15 kV ESD-protected configuration, so the best replacement depends on whether the original design uses shutdown, automatic shutdown, or a specific maximum data rate. Compare the exact suffix data sheets and confirm pin functions before production release. Packaging-code variants alone are not substantive alternatives and should not be used simply to change the reel marking.
Does MAX3232ECUP+ need external charge-pump capacitors?
Yes, the MAX3232ECUP+ uses four small external capacitors with its dual charge-pump circuit. According to the Analog Devices MAX3232E product information, the device combines two line drivers, two line receivers, and a dual charge pump that requires four small charge-pump capacitors. Select the capacitor values and tolerances specified by the manufacturer datasheet, account for the effective DC-bias derating of ceramic capacitors, and place each capacitor close to the corresponding pins. Follow the recommended layout to limit pump ripple and maintain reliable RS-232 output levels.

工程参考数据: MAX3232ECUP+ ——对比、设计指导和合规信息。

选型指南

Choose MAX3232ECUP+ when the design needs a 3.0 V to 5.5 V true RS-232 interface, operation up to 1 Mbps, and ±15 kV ESD protection in a 20-pin TSSOP footprint. MAX3232ECDR is the first same-brand alternative to evaluate for PCB reuse, provided its exact data-rate and shutdown limits meet the design. MAX3232CDBR and MAX3232CUE+ are appropriate only after checking their data rate, ESD rating, and power-management functions. MAX3232EEUP+ may suit a closely related configuration, but its ordering-code functions must be verified. MAX3000EEUP+ makes more sense when low-power behavior matters more than the MAX3232E 1 Mbps feature set. For all candidates, compare the manufacturer pin tables and electrical limits rather than relying on package similarity alone.

与替代料对比

参数 本产品 MAX3232ECDR MAX3232CDBR MAX3232CUE+ MAX3232EEUP+ MAX3000EEUP+
Package TSSOP-20 TSSOP-20 TSSOP-20 TSSOP-20 TSSOP-20 TSSOP-20
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices

关键差异点

  • Higher stated maximum data rate (对比 MAX3232CDBR)
  • Enhanced ESD protection in the selected suffix (对比 MAX3232CUE+)
  • Single 3.0 V to 5.5 V supply with true RS-232 signaling (对比 MAX3000EEUP+)

设计说明

Place the four external charge-pump capacitors close to their corresponding MAX3232ECUP+ pins and use the values and tolerances specified by the Analog Devices datasheet. Ceramic capacitor effective capacitance can fall substantially with DC bias, so validate the effective value rather than relying only on the printed capacitance. Keep charge-pump current loops compact and provide a low-impedance ground reference near the device. This layout discipline reduces charge-pump ripple, startup variation, and emissions that could disturb nearby circuitry.

Route RS-232 driver and receiver nets away from sensitive analog inputs, clock signals, and high-speed digital traces wherever possible. Keep the connector-side ground return continuous and short so surge and ESD currents do not pass through sensitive system ground paths. Use controlled geometry for the cable interface and avoid long parallel runs with unrelated nets. Although the device provides ±15 kV ESD protection, that rating does not replace careful placement, grounding, or external surge-protection design for long or exposed cables.

Decouple the 3.0 V to 5.5 V supply with capacitors selected according to the manufacturer layout and stability guidance. Check the exact suffix data sheet before assigning the device's shutdown pins because shutdown topology and timing can vary across MAX3232E ordering codes. When power is switched intermittently, verify that the UART remains in a defined logic state during startup and shutdown. The low-power specification of down to 10 nA applies only under its defined conditions and should not be interpreted as the active operating current.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No definitive compliance declaration for the exact MAX3232ECUP+ ordering code appears in the retrieved manufacturer or distributor information. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product declaration before procurement.

数据核验日期: 2026-11-17 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MAX3232ECUP+ datasheet MAX3232ECUP+ pinout MAX3232ECUP+ datasheet pdf MAX3232ECUP+ equivalent MAX3232ECUP+ replacement MAX3232ECUP+ cross reference MAX3232ECUP+ vs MAX3232ECDR MAX3232ECUP+ footprint MAX3232ECUP+ 1Mbps RS-232 MAX3232ECUP+ TSSOP-20 Analog Devices MAX3232ECUP+ MAX3232ECUP+ price MAX3232ECUP+ stock MAX3232ECUP+ industrial serial

相关元器件 & 术语

Analog Devices MAX3232ECUP+ MAX3232ECDR MAX3232CDBR MAX3232CUE+ MAX3232EEUP+ MAX3000EEUP+ RS-232 transceiver true RS-232 interface interface IC line driver line receiver dual charge pump UART full-duplex serial communication TSSOP-20 TSSOP package family surface-mount package ESD protection charge-pump capacitor industrial serial communication data acquisition point-of-sale terminal laboratory instrumentation 3.3 V logic
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情