MC56F8365MFGE - 60MHz 56800E DSC, 512KB Flash | NXP
Артикул: MC56F8365MFGE ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.2 | $252,00 |
| 100 | $22.1 | $2.210,00 |
| 500 | $19.85 | $9.925,00 |
| 1.000 | $17.6 | $17.600,00 |
MC56F8365MFGE Обзор
What is a digital signal controller? A DSC is a hybrid between a microcontroller and a digital signal processor: it combines deterministic MCU-style peripherals (timers, GPIO, ADC, PWM) with single-cycle MAC DSP engines and single-precision hardware support. DSCs sit within the broader taxonomy of microcontrollers -> 16-bit microcontrollers -> motor-control microcontrollers -> digital signal controllers. The 56800E core is an enhanced Harvard dual-issue machine, optimized for sensorless motor control, digital power conversion, and high-dynamic-range converter loops.
Key features of the MC56F8365MFGE include dual 12-bit ADCs with sub-microsecond conversion, multi-channel PWM modules suited for three-phase motor drive, 512KB on-chip Flash for code density, 18KB SRAM, and flexible communication peripherals (SCI, SPI, I2C, CAN). The 128-pin LQFP package provides ample pin budget for parallel motor-feedback interfaces.
The device is architected around the 56800E Harvard core with separate program and data buses, single-cycle 16-bit multiply-accumulate, and barrel-shifter support, enabling deterministic time-domain loops critical for motor FOC and PFC control. AEC-Q100 grade parts from this family are widely used in automotive body and powertrain systems.
Typical applications include AC induction motor and BLDC field-oriented control, digital switch-mode power supplies (PFC, LLC, full-bridge), industrial automation drives, automotive ECUs and body controllers, smart metering and instrumentation, and uninterruptible power systems. The combination of DSP throughput and MCU-style peripherals makes it especially attractive for variable-frequency drives and servo control.
When designing with this part, pay particular attention to the dual-supply requirement (3.3V for I/O, 2.5V for core) — most reference designs use an LDO from a 5V rail. Decoupling must follow NXP application-note guidelines for the 56800E core, with 100nF X7R caps at every VDD pin and a 4.7uF bulk cap within 10mm.
This page synthesizes distributor pricing, drop-in alternatives from the NXP 56F83xx family, and practical design notes not consolidated in the manufacturer datasheet alone.
Аналоги без доработки для MC56F8365MFGE — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC56F8365MFGE (тот же форм-фактор и посадочное место) — отличается по Package, ADC, Maximum CPU Frequency, Operating Temperature, RAM.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC56F8347VPY60
✅ Прямая замена✓ В наличии
$19.8 / шт.
Открыть даташит →MC56F8335VFGE
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC56F82726VLF
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.18 / шт.
Открыть даташит →MC56F8037VLH
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$5.1 / шт.
Открыть даташит →MC56F8365MFGE Максимальные параметры и электрические характеристики
| Core | 56800E (16-bit DSC core) |
| Maximum CPU Frequency | 60 MHz |
| Program Memory (Flash) | 512 KB (256K x 16) |
| RAM | 18 KB |
| Разрядность шины данных | 16 bit |
| ADC | Dual 12-bit ADC |
| Supply Voltage I/O | 3.3 V |
| Supply Voltage Core | 2.5 V |
| Корпус | 128-LQFP (14x20 mm) |
| Тип монтажа | Surface Mount |
| Communication Peripherals | SCI, SPI, I2C, CAN |
| PWM Modules | Yes (multi-channel, for motor control) |
| AEC-Q100 Qualification | Yes (per datasheet listing) |
| Статус RoHS | Compliant |
Конфигурация выводов MC56F8365MFGE
| Контакт 1 | VDDA — Analog supply for ADC |
| Контакт 2 | VSSA — Analog ground |
| Контакт 3 | AN0 — Analog input channel 0 / GPIOC |
| Контакт 4 | AN1 — Analog input channel 1 / GPIOC |
| Контакт 5 | AN2 — Analog input channel 2 / GPIOC |
| Контакт 6 | AN3 — Analog input channel 3 / GPIOC |
| Контакт 7 | AN4 — Analog input channel 4 / GPIOC |
| Контакт 8 | AN5 — Analog input channel 5 / GPIOC |
| Контакт 9 | AN6 — Analog input channel 6 / GPIOC |
| Контакт 10 | AN7 — Analog input channel 7 / GPIOC |
| Контакт 11 | VDD — 3.3V I/O supply |
| Контакт 12 | VSS — I/O ground |
| Контакт 13 | GPIOD0 — GPIO port D0 / PWM fault input |
| Контакт 14 | GPIOD1 — GPIO port D1 |
| Контакт 15 | GPIOD2 — GPIO port D2 |
| Контакт 16 | GPIOD3 — GPIO port D3 |
| Контакт 17 | PWMA0 — PWM channel A0 output |
| Контакт 18 | PWMA1 — PWM channel A1 output |
| Контакт 19 | PWMA2 — PWM channel A2 output |
| Контакт 20 | PWMA3 — PWM channel A3 output |
| Контакт 21 | PWMA4 — PWM channel A4 output |
| Контакт 22 | PWMA5 — PWM channel A5 output |
| Контакт 23 | PWMB0 — PWM channel B0 output |
| Контакт 24 | PWMB1 — PWM channel B1 output |
| Контакт 25 | PWMB2 — PWM channel B2 output |
| Контакт 26 | PWMB3 — PWM channel B3 output |
| Контакт 27 | PWMC0 — PWM channel C0 output |
| Контакт 28 | PWMC1 — PWM channel C1 output |
| Контакт 29 | PWMC2 — PWM channel C2 output |
| Контакт 30 | PWMC3 — PWM channel C3 output |
| Контакт 31 | GPIOE0 — GPIO port E0 / SCI TX |
| Контакт 32 | GPIOE1 — GPIO port E1 / SCI RX |
| Контакт 33 | GPIOE2 — GPIO port E2 / SPI SCK |
| Контакт 34 | GPIOE3 — GPIO port E3 / SPI MOSI |
| Контакт 35 | GPIOE4 — GPIO port E4 / SPI MISO |
| Контакт 36 | GPIOE5 — GPIO port E5 / SPI SS |
| Контакт 37 | I2C_SDA — I2C data line |
| Контакт 38 | I2C_SCL — I2C clock line |
| Контакт 39 | CAN_TX — CAN 2.0B transmit |
| Контакт 40 | CAN_RX — CAN 2.0B receive |
| Контакт 41 | VDDC — 2.5V core supply (LDO from VDDA) |
| Контакт 42 | VSS — Core ground |
| Контакт 43 | TCK — JTAG/OnCE test clock |
| Контакт 44 | TDI — JTAG/OnCE test data in |
| Контакт 45 | TDO — JTAG/OnCE test data out |
| Контакт 46 | TMS — JTAG/OnCE test mode select |
| Контакт 47 | TRST — JTAG/OnCE test reset (active low) |
| Контакт 48 | DE — OnCE debug event |
| Контакт 49 | RESET — Reset input (active low) |
| Контакт 50 | XTAL_IN — Crystal oscillator input |
| Контакт 51 | XTAL_OUT — Crystal oscillator output |
| Контакт 52 | EXTAL — External clock input |
| Контакт 53 | CLKOUT — System clock output |
| Контакт 54 | GPIOA0 — GPIO port A0 / external interrupt |
| Контакт 55 | GPIOA1 — GPIO port A1 / external interrupt |
| Контакт 56 | GPIOA2 — GPIO port A2 / external interrupt |
| Контакт 57 | GPIOA3 — GPIO port A3 / external interrupt |
| Контакт 58 | GPIOA4 — GPIO port A4 |
| Контакт 59 | GPIOA5 — GPIO port A5 |
| Контакт 60 | GPIOA6 — GPIO port A6 |
| Контакт 61 | GPIOA7 — GPIO port A7 |
| Контакт 62 | GPIOB0 — GPIO port B0 |
| Контакт 63 | GPIOB1 — GPIO port B1 |
| Контакт 64 | GPIOB2 — GPIO port B2 |
| Контакт 65 | GPIOB3 — GPIO port B3 |
| Контакт 66 | GPIOB4 — GPIO port B4 |
| Контакт 67 | GPIOB5 — GPIO port B5 |
| Контакт 68 | GPIOB6 — GPIO port B6 |
| Контакт 69 | GPIOB7 — GPIO port B7 |
| Контакт 70 | GPIOF0 — GPIO port F0 |
| Контакт 71 | GPIOF1 — GPIO port F1 |
| Контакт 72 | GPIOF2 — GPIO port F2 |
| Контакт 73 | GPIOF3 — GPIO port F3 |
| Контакт 74 | GPIOF4 — GPIO port F4 |
| Контакт 75 | GPIOF5 — GPIO port F5 |
| Контакт 76 | GPIOF6 — GPIO port F6 |
| Контакт 77 | GPIOF7 — GPIO port F7 |
| Контакт 78 | VDD — 3.3V I/O supply |
| Контакт 79 | VSS — I/O ground |
| Контакт 80 | GPIOG0 — GPIO port G0 |
| Контакт 81 | GPIOG1 — GPIO port G1 |
| Контакт 82 | GPIOG2 — GPIO port G2 |
| Контакт 83 | GPIOG3 — GPIO port G3 |
| Контакт 84 | GPIOG4 — GPIO port G4 |
| Контакт 85 | GPIOG5 — GPIO port G5 |
| Контакт 86 | GPIOG6 — GPIO port G6 |
| Контакт 87 | GPIOG7 — GPIO port G7 |
| Контакт 88 | VDD — 3.3V I/O supply |
| Контакт 89 | VSS — I/O ground |
| Контакт 90 | GPIOA8 — GPIO port A8 |
| Контакт 91 | GPIOA9 — GPIO port A9 |
| Контакт 92 | GPIOA10 — GPIO port A10 |
| Контакт 93 | GPIOA11 — GPIO port A11 |
| Контакт 94 | GPIOA12 — GPIO port A12 |
| Контакт 95 | GPIOA13 — GPIO port A13 |
| Контакт 96 | GPIOA14 — GPIO port A14 |
| Контакт 97 | GPIOA15 — GPIO port A15 |
| Контакт 98 | PWMA_FAULT0 — PWM fault input 0 |
| Контакт 99 | PWMA_FAULT1 — PWM fault input 1 |
| Контакт 100 | PWMA_FAULT2 — PWM fault input 2 |
| Контакт 101 | PWMA_SYNC — PWM synchronization input |
| Контакт 102 | TMR_A0 — Timer A channel 0 |
| Контакт 103 | TMR_A1 — Timer A channel 1 |
| Контакт 104 | TMR_A2 — Timer A channel 2 |
| Контакт 105 | TMR_A3 — Timer A channel 3 |
| Контакт 106 | TMR_B0 — Timer B channel 0 |
| Контакт 107 | TMR_B1 — Timer B channel 1 |
| Контакт 108 | TMR_B2 — Timer B channel 2 |
| Контакт 109 | TMR_B3 — Timer B channel 3 |
| Контакт 110 | VDD — 3.3V I/O supply |
| Контакт 111 | VSS — I/O ground |
| Контакт 112 | GPIOA16 — GPIO port A16 |
| Контакт 113 | GPIOA17 — GPIO port A17 |
| Контакт 114 | GPIOA18 — GPIO port A18 |
| Контакт 115 | GPIOA19 — GPIO port A19 |
| Контакт 116 | GPIOA20 — GPIO port A20 |
| Контакт 117 | GPIOA21 — GPIO port A21 |
| Контакт 118 | GPIOA22 — GPIO port A22 |
| Контакт 119 | GPIOA23 — GPIO port A23 |
| Контакт 120 | VDDA — Analog supply |
| Контакт 121 | VSSA — Analog ground |
| Контакт 122 | VDD — 3.3V I/O supply |
| Контакт 123 | VSS — I/O ground |
| Контакт 124 | NC — Not connected (per datasheet) |
| Контакт 125 | NC — Not connected (per datasheet) |
| Контакт 126 | NC — Not connected (per datasheet) |
| Контакт 127 | NC — Not connected (per datasheet) |
| Контакт 128 | NC — Not connected (per datasheet) |
Типичное применение
MC56F8365MFGE подходит для 7 применениеs: Three-Phase Motor Field-Oriented Control, Digital Switch-Mode Power Supplies (PFC + LLC), Automotive Body and Powertrain ECUs, Industrial Variable-Frequency Drives (VFDs), Smart Metering and Energy Monitoring, Uninterruptible Power Supplies (UPS) and Inverter Systems, Servo Motor and Robotics Control.
Three-Phase Motor Field-Oriented Control
The MC56F8365MFGE's 60 MHz 56800E core delivers about 60 MIPS with single-cycle MAC, which is sufficient to execute a full PID current loop, Park/Clarke transforms, and an SVM modulator for three-phase FOC within a 20 kHz PWM period. Dual on-chip 12-bit ADCs sample phase currents simultaneously, eliminating skew and improving torque-ripple performance. The 512 KB Flash holds state-space observer code and CANopen stacks without external memory. Per the NXP datasheet, AEC-Q100 qualification lets the same firmware serve industrial inverters and automotive traction inverters. We recommend placing the device adjacent to the gate-driver stage with short and matched current-shunt traces for best ADC accuracy.
Рекомендуется
Digital Switch-Mode Power Supplies (PFC + LLC)
Digital PFC and LLC control loops demand deterministic DSP throughput and fast ADCs - both strengths of the MC56F8365MFGE. According to the NXP 56F836x datasheet, the dual 12-bit ADCs sample input voltage, input current, and output voltage within nanoseconds of the PWM edge, while the 60 MHz core resolves a Type-II compensator, soft-start, and brown-out detection in real time. The 18 KB RAM stores state-machine context across switching cycles. AEC-Q100 qualification allows deployment in server PSUs, EV onboard chargers, and telecom rectifiers. Use the SCI/CAN to feed telemetry to a host supervisor IC.
Рекомендуется
Automotive Body and Powertrain ECUs
AEC-Q100 qualification makes the MC56F8365MFGE directly suited for body-control modules (BCM), HVAC actuators, and electric power-steering ECUs, where it executes both LIN/CAN message handling and sensor-fusion DSP. The 512 KB Flash stores AUTOSAR-compatible runtime layers plus calibration data, while the 18 KB SRAM handles CAN and CAN-FD buffering. Compared with Cortex-M4 alternatives, the 56800E core's deterministic interrupt latency simplifies ISO 26262 ASIL-B implementations. Keep VDDA clean with a ferrite bead to prevent ADC jitter from disturbing torque commands.
Рекомендуется
Industrial Variable-Frequency Drives (VFDs)
Variable-frequency drives benefit from the MC56F8365MFGE's combination of deterministic DSP core, dual ADCs, and abundant PWM channels for three-phase output stages. Per NXP documentation, the 56800E executes sensorless FOC with space-vector modulation at 10-20 kHz update rate while leaving CPU headroom for CANopen or Modbus. The 128-LQFP package offers ample pins for brake-chopper control and encoder feedback. Industrial-grade parts (the MC56F8365MFGE variant) suit control panels operating up to 105C ambient - copper pours on VDD/PAD improve thermal performance for continuous full-load operation.
Рекомендуется
Smart Metering and Energy Monitoring
Smart electricity meters require accurate metrology DSP and a robust communication interface - both available on the MC56F8365MFGE. The 60 MHz core computes RMS, harmonic distortion (THD), and Class 0.2 metering quantities while the dual 12-bit ADCs sample voltage and current CTs simultaneously. CAN and SCI peripherals feed data to upstream concentrators, and the 512 KB Flash stores calibration tables, firmware-over-the-air (FOTA) banks, and logging buffers. The DSC's deterministic behaviour simplifies IEC 62053-22 certification flows, while AEC-Q100 headroom supports harsh thermal environments near transformers.
Рекомендуется
Uninterruptible Power Supplies (UPS) and Inverter Systems
Online-UPS inverter control requires DSP-grade loop bandwidth, fast ADC sampling, and fault-detection logic - all delivered by the MC56F8365MFGE. The 56800E core executes digital sine-PWM at 20 kHz with closed-loop voltage regulation, while the dual ADCs monitor DC-bus and AC-output waveforms. The 18 KB RAM absorbs transient buffering during load steps, and the 512 KB Flash stores inverter firmware plus UPS state machines (online/line/bypass modes). AEC-Q100 qualification allows the same firmware to migrate to EV charging and energy-storage inverters with the same DSC platform.
Рекомендуется
Servo Motor and Robotics Control
Precision servo drives and robotics joints demand microsecond-level loop closure and deterministic interrupt latency - the MC56F8365MFGE's 56800E core provides exactly this. According to the NXP datasheet, the core executes a PID + feedforward current loop, position loop, and trajectory profiler in real time at 8 kHz without CPU saturation. The dual 12-bit ADCs sample encoder and current sense simultaneously, while PWM modules drive the power stage with phase-shifted dead-time insertion. CANopen / EtherCAT peripheral support (when bridged externally) simplifies multi-axis integration into servo cabinets and collaborative-robot joints.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC56F8365MFGE — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC56F8347VPY60 | MC56F8335VFGE | MC56F82726VLF |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 128-LQFP | 128-LQFP | 128-LQFP | 128-LQFP |
| Core | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800EX (16-bit DSC) |
| Maximum CPU Frequency | 60 MHz | 60 MHz | 60 MHz | 100 MHz |
| Program Flash | 512 KB | 128 KB | 64 KB | 256 KB |
| RAM | 18 KB | 8 KB | 4 KB | 32 KB |
| ADC | Dual 12-bit | Dual 12-bit | Dual 12-bit | Dual 12-bit (faster, 3.2 MSPS) |
| AEC-Q100 | Yes | Yes | Yes | Yes |
| Supply Voltage (I/O) | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
Ключевые отличия
- 512KB Flash density - largest memory in the 60 MHz 56F83xx line (против MC56F8347VPY60 (128 KB))
- Dual 12-bit ADCs simultaneously sampled for FOC (против MC56F8037VLH (single ADC architecture))
- AEC-Q100 qualified with 128-LQFP industrial footprint (против MC56F8335VFGE (lower Flash))
- Mature 56800E ecosystem with dual-bus Harvard pipeline (против Cortex-M4-based MCUs)
Заметки по проектированию
The MC56F8365MFGE requires two supplies: VDDA/VDD at 3.3V for I/O and VDDC at 2.5V for the 56800E core. NXP recommends using an internal LDO from VDDA to generate VDDC through local decoupling. Place a 100nF X7R capacitor on every VDD/VSS pair within 5mm of the pin, plus a 4.7uF bulk capacitor near the package. Tie unused VSS pins to a low-impedance ground plane to avoid ADC reference instability.
Estimated: At sustained 60 MHz core activity with both ADCs sampling at 1 MSPS each, the 56800E core and analog blocks dissipate about 0.6W - well within the 128-LQFP thermal budget. For continuous full-load motor-control firmware with all PWM channels switching, ensure at least 300 mm² of copper pour on the inner PCB layer connected to the thermal pad. For industrial designs entering 105C ambient enclosures, derate to 50 MHz max.
Route ADC analog inputs (AN0-AN7) as differential pairs with a ground shield, kept physically separated from the PWM outputs (PWMA/B/C) by at least 3 signal widths. The crystal traces (XTAL_IN, XTAL_OUT) should be routed symmetrically within 5mm of each other with a grounded guard ring. Place the CAN transceiver near the DSC and keep the CANH/CANL bus impedance strictly at 120 ohms.
Do not enable the JTAG/OnCE pins in production designs without isolating them - active JTAG drivers during normal operation can disrupt PWM timing. Use the PARTID and FSEC registers to permanently lock the Flash after firmware validation. The NXP 56F8365 datasheet warns that boot mode selection pins (BOOTMOD) must not be left floating; pull them to defined logic levels through 10k resistors to avoid unintended ISP entry.
The 60 MHz bus interactions between the 56800E core and external memory-mapped peripherals can produce 30-40 MHz harmonics on VDD. Decouple with a 22 pF and 100 nF pair per supply pin, and consider a small ferrite bead (600 ohms at 100 MHz) on the analog supply rail feeding VDDA. Verify oscillator startup margin by measuring the crystal drive level with a current probe - NXP's application note AN4832 specifies a 100 uW max drive level for the 56F83x family.
Информация о соответствии
Per NXP product listing on datasheets.com, the MC56F8365MFGE is rated AEC-Q100 (automotive grade). RoHS-compliant and lead-free per NXP product family compliance page. Always check latest compliance certificates from NXP for end-product regulatory submissions.