MC9S12XEQ512CAG - 16-Bit S12X MCU, 512KB Flash, 50MHz, 144-LQFP | NXP
Артикул: MC9S12XEQ512CAG ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $22.5 | $22,50 |
| 10 | $20.25 | $202,50 |
| 100 | $17.85 | $1.785,00 |
| 500 | $16.1 | $8.050,00 |
| 1.000 | $14.4 | $14.400,00 |
MC9S12XEQ512CAG Обзор
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals. In the embedded system taxonomy, the MC9S12XEQ512CAG is a Flash-based MCU -> CISC microcontroller -> 16-bit embedded controller -> automotive-grade semiconductor. The HCS12X core uses a CISC instruction set with enhanced addressing modes, while the XGATE peripheral co-processor enables offloading of time-critical interrupt servicing to free the main CPU for application code.
Key features include 512 KB on-chip Flash, 32 KB RAM, a 12-bit ADC with 3 us conversion time, an enhanced capture timer (ECT), periodic interrupt timer (PIT), real-time interrupt (RTI), CAN, SCI, SPI, and a memory protection unit supporting supervisor/user privilege separation. The XGATE co-processor operates at twice the bus speed and can be used to implement virtual peripherals and DMA-style data movement at zero CPU overhead.
The device supports multi-voltage I/O (5V or 3.3V) and operates across an extended automotive temperature range (-40C to +85C for the -CAG suffix). Its on-chip regulator accepts a single external 5V supply and generates internal 1.8V and 2.8V rails. The integrated CAN module makes it well-suited for in-vehicle networking and industrial fieldbus.
Typical applications include body control modules (BCM), instrument clusters, automotive HVAC controllers, industrial CAN nodes, and sensor interface platforms. The combination of deterministic interrupt latency and large Flash makes the part a strong fit for firmware-rich automotive ECUs where software-update time and reliability matter.
When designing with this part, note that the 144-LQFP package requires 4-layer PCB for clean SI on the external bus interface, and the XGATE firmware must be loaded into a dedicated RAM region. The MCU's Flash programming model uses a separate erase sector for EEPROM emulation and demands specific sequencing for security unlocking.
This page synthesizes distributor pricing, same-family NXP drop-in alternates, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для MC9S12XEQ512CAG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S12XEQ512CAG (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Supply Voltage, Core, ADC.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S12XEQ384CAG
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →MC9S12XDP512CAG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S12XEP768CAG
✅ Прямая замена✓ В наличии
$19.85 / шт.
Открыть даташит →MC9S12XDT512MAA
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →MC9S12A512CPVE
✅ Прямая замена✓ В наличии
$10.45 / шт.
Открыть даташит →MC9S12XEQ512CAG Максимальные параметры и электрические характеристики
| Core | HCS12X (16-bit CISC) |
| Co-processor | XGATE (RISC, 2x bus speed) |
| Bus Speed (Max) | 50 MHz |
| Program Flash | 512 KB (512K x 8) |
| RAM | 32 KB |
| ADC | 12-bit, 3 us conversion time |
| Operating Voltage | 1.8 V / 2.8 V / 5 V (multi-supply I/O) |
| Рабочая температура | -40 C to +85 C |
| Корпус | 144-LQFP (20 x 20 mm) |
| Тип монтажа | Surface Mount |
| Communication | CAN, SCI, SPI |
| Timers | ECT, PIT, RTI |
| Security | Memory Protection Unit (supervisor/user modes) |
| Уровень MSL | 3 (168 hours) |
| Статус RoHS | Compliant |
| Series | S12XE Family |
Конфигурация выводов MC9S12XEQ512CAG
| Контакт 1 | VDDR — Voltage regulator output (internal 2.8V) |
| Контакт 2 | VDD1 — Core voltage supply (1.8V internal) |
| Контакт 3 | VDDX — I/O voltage supply (3.3V or 5V) |
| Контакт 4 | VSS — Ground |
| Контакт 5 | RESET_b — Active-low reset input |
| Контакт 6 | MODC — Mode selection (background debug mode) |
| Контакт 7 | BKGD — Background debug and mode select |
| Контакт 8 | PAD0 — Port AD bit 0 (also ATD0.10A) |
| Контакт 9 | PAD1 — Port AD bit 1 |
| Контакт 10 | PAD2 — Port AD bit 2 |
| Контакт 11 | PAD3 — Port AD bit 3 |
| Контакт 12 | PAD4 — Port AD bit 4 |
| Контакт 13 | PAD5 — Port AD bit 5 |
| Контакт 14 | PAD6 — Port AD bit 6 |
| Контакт 15 | PAD7 — Port AD bit 7 |
| Контакт 16 | PAD8 — Port AD bit 8 |
| Контакт 17 | PAD9 — Port AD bit 9 |
| Контакт 18 | PAD10 — Port AD bit 10 |
| Контакт 19 | PAD11 — Port AD bit 11 |
| Контакт 20 | PAD12 — Port AD bit 12 |
| Контакт 21 | PAD13 — Port AD bit 13 |
| Контакт 22 | PAD14 — Port AD bit 14 |
| Контакт 23 | PAD15 — Port AD bit 15 |
| Контакт 24 | PAD16 — Port AD bit 16 |
| Контакт 25 | PAD17 — Port AD bit 17 |
| Контакт 26 | PAD18 — Port AD bit 18 |
| Контакт 27 | PAD19 — Port AD bit 19 |
| Контакт 28 | PAD20 — Port AD bit 20 |
| Контакт 29 | PAD21 — Port AD bit 21 |
| Контакт 30 | PAD22 — Port AD bit 22 |
| Контакт 31 | PAD23 — Port AD bit 23 |
| Контакт 32 | PAD24 — Port AD bit 24 |
| Контакт 33 | PAD25 — Port AD bit 25 |
| Контакт 34 | PAD26 — Port AD bit 26 |
| Контакт 35 | PAD27 — Port AD bit 27 |
| Контакт 36 | PAD28 — Port AD bit 28 |
| Контакт 37 | PAD29 — Port AD bit 29 |
| Контакт 38 | PAD30 — Port AD bit 30 |
| Контакт 39 | PAD31 — Port AD bit 31 |
| Контакт 40 | PA0 — Port A bit 0 (general I/O) |
| Контакт 41 | PA1 — Port A bit 1 |
| Контакт 42 | PA2 — Port A bit 2 |
| Контакт 43 | PA3 — Port A bit 3 |
| Контакт 44 | PA4 — Port A bit 4 |
| Контакт 45 | PA5 — Port A bit 5 |
| Контакт 46 | PA6 — Port A bit 6 |
| Контакт 47 | PA7 — Port A bit 7 |
| Контакт 48 | PB0 — Port B bit 0 |
| Контакт 49 | PB1 — Port B bit 1 |
| Контакт 50 | PB2 — Port B bit 2 |
| Контакт 51 | PB3 — Port B bit 3 |
| Контакт 52 | PB4 — Port B bit 4 |
| Контакт 53 | PB5 — Port B bit 5 |
| Контакт 54 | PB6 — Port B bit 6 |
| Контакт 55 | PB7 — Port B bit 7 |
| Контакт 56 | PC0 — Port C bit 0 |
| Контакт 57 | PC1 — Port C bit 1 |
| Контакт 58 | PC2 — Port C bit 2 |
| Контакт 59 | PC3 — Port C bit 3 |
| Контакт 60 | PC4 — Port C bit 4 |
| Контакт 61 | PC5 — Port C bit 5 |
| Контакт 62 | PC6 — Port C bit 6 |
| Контакт 63 | PC7 — Port C bit 7 |
| Контакт 64 | VSS — Ground |
| Контакт 65 | VDDX — I/O voltage supply |
| Контакт 66 | PE0 — Port E bit 0 (also IRQ interrupt) |
| Контакт 67 | PE1 — Port E bit 1 (also XIRQ interrupt) |
| Контакт 68 | PE2 — Port E bit 2 |
| Контакт 69 | PE3 — Port E bit 3 |
| Контакт 70 | PE4 — Port E bit 4 |
| Контакт 71 | PE5 — Port E bit 5 |
| Контакт 72 | PE6 — Port E bit 6 |
| Контакт 73 | PE7 — Port E bit 7 |
| Контакт 74 | PJ0 — Port J bit 0 (CAN0 TX) |
| Контакт 75 | PJ1 — Port J bit 1 (CAN0 RX) |
| Контакт 76 | PJ2 — Port J bit 2 |
| Контакт 77 | PJ3 — Port J bit 3 |
| Контакт 78 | PJ4 — Port J bit 4 |
| Контакт 79 | PJ5 — Port J bit 5 |
| Контакт 80 | PJ6 — Port J bit 6 |
| Контакт 81 | PJ7 — Port J bit 7 |
| Контакт 82 | PK0 — Port K bit 0 |
| Контакт 83 | PK1 — Port K bit 1 |
| Контакт 84 | PK2 — Port K bit 2 |
| Контакт 85 | PK3 — Port K bit 3 |
| Контакт 86 | PK4 — Port K bit 4 |
| Контакт 87 | PK5 — Port K bit 5 |
| Контакт 88 | PK6 — Port K bit 6 |
| Контакт 89 | PK7 — Port K bit 7 |
| Контакт 90 | PM0 — Port M bit 0 |
| Контакт 91 | PM1 — Port M bit 1 |
| Контакт 92 | PM2 — Port M bit 2 |
| Контакт 93 | PM3 — Port M bit 3 |
| Контакт 94 | PM4 — Port M bit 4 |
| Контакт 95 | PM5 — Port M bit 5 |
| Контакт 96 | PM6 — Port M bit 6 |
| Контакт 97 | PM7 — Port M bit 7 |
| Контакт 98 | PP0 — Port P bit 0 (PWM channel) |
| Контакт 99 | PP1 — Port P bit 1 (PWM channel) |
| Контакт 100 | PP2 — Port P bit 2 (PWM channel) |
| Контакт 101 | PP3 — Port P bit 3 (PWM channel) |
| Контакт 102 | PP4 — Port P bit 4 (PWM channel) |
| Контакт 103 | PP5 — Port P bit 5 (PWM channel) |
| Контакт 104 | PP6 — Port P bit 6 (PWM channel) |
| Контакт 105 | PP7 — Port P bit 7 (PWM channel) |
| Контакт 106 | PS0 — Port S bit 0 (SPI0 SCK) |
| Контакт 107 | PS1 — Port S bit 1 (SPI0 MOSI) |
| Контакт 108 | PS2 — Port S bit 2 (SPI0 MISO) |
| Контакт 109 | PS3 — Port S bit 3 (SPI0 SS) |
| Контакт 110 | PS4 — Port S bit 4 |
| Контакт 111 | PS5 — Port S bit 5 |
| Контакт 112 | PS6 — Port S bit 6 |
| Контакт 113 | PS7 — Port S bit 7 |
| Контакт 114 | PT0 — Port T bit 0 (ECT channel) |
| Контакт 115 | PT1 — Port T bit 1 (ECT channel) |
| Контакт 116 | PT2 — Port T bit 2 (ECT channel) |
| Контакт 117 | PT3 — Port T bit 3 (ECT channel) |
| Контакт 118 | PT4 — Port T bit 4 (ECT channel) |
| Контакт 119 | PT5 — Port T bit 5 (ECT channel) |
| Контакт 120 | PT6 — Port T bit 6 (ECT channel) |
| Контакт 121 | PT7 — Port T bit 7 (ECT channel) |
| Контакт 122 | VDDX — I/O voltage supply |
| Контакт 123 | VSS — Ground |
| Контакт 124 | CAN0TX — CAN 0 transmit output |
| Контакт 125 | CAN0RX — CAN 0 receive input |
| Контакт 126 | VDDX — I/O voltage supply |
| Контакт 127 | XCLKS — Clock select (low=loop controlled) |
| Контакт 128 | EXTAL — External clock/crystal input |
| Контакт 129 | XTAL — Crystal output |
| Контакт 130 | ECLK — ECLK free-running clock output |
| Контакт 131 | TEST — Test mode pin (tie to VSS for floating) |
| Контакт 132 | VDDR — Voltage regulator output |
| Контакт 133 | VSS — Ground |
| Контакт 134 | VDDPLL — PLL supply voltage |
| Контакт 135 | VSSPLL — PLL ground |
| Контакт 136 | PAD32 — Port AD bit 32 (ATD input) |
| Контакт 137 | PAD33 — Port AD bit 33 (ATD input) |
| Контакт 138 | PAD34 — Port AD bit 34 (ATD input) |
| Контакт 139 | PAD35 — Port AD bit 35 (ATD input) |
| Контакт 140 | PAD36 — Port AD bit 36 (ATD input) |
| Контакт 141 | PAD37 — Port AD bit 37 (ATD input) |
| Контакт 142 | PAD38 — Port AD bit 38 (ATD input) |
| Контакт 143 | PAD39 — Port AD bit 39 (ATD input) |
| Контакт 144 | PAD40 — Port AD bit 40 (ATD input) |
Типичное применение
MC9S12XEQ512CAG подходит для 6 применениеs: Automotive Body Control Module (BCM), Industrial CAN-Open Fieldbus Node, Automotive HVAC Climate Controller, Instrument Cluster Display Controller, Automotive Lighting ECU, Sensor Interface / Data Acquisition Module.
Automotive Body Control Module (BCM)
The MC9S12XEQ512CAG fits body control modules because it combines an on-chip CAN 2.0A/B controller with 512 KB of Flash, enough for a full BCM firmware stack (drivers, body application, CAN stack, UDS diagnostics, and bootloader) plus headroom for OTA-friendly A/B image banks. The XGATE co-processor offloads PWM edge generation for lighting and seat motors, freeing the main HCS12X core to run body-domain CAN networking at 500 kbit/s without dropped frames. The 144-LQFP footprint provides ample GPIO for door/wiper/lighting matrices. Operating from -40C to +85C with 5V I/O, it tolerates harsh automotive under-hood electrical environments without external level shifters.
Рекомендуется
Industrial CAN-Open Fieldbus Node
In industrial CAN-Open and DeviceNet nodes, the MC9S12XEQ512CAG's on-chip CAN and 32 KB RAM host a CAN-Open stack (CiA 401/402/406) plus PDO/SDO handlers without external memory. The 50 MHz HCS12X core delivers deterministic cycle times down to 1 ms for synchronous PDOs across 16 nodes. The 144-LQFP package exposes the ECT (enhanced capture timer) for precise quadrature decoding of incremental encoders and supports up to 8 PWM channels for motor or valve actuation. Wide operating temperature and on-chip EEPROM emulation (via Flash sector) suit long-life industrial deployments where frequent parameter writes are needed.
Рекомендуется
Automotive HVAC Climate Controller
HVAC climate controllers benefit from the MC9S12XEQ512CAG's combination of 12-bit ADC with 3 us conversion for NTC temperature sensor scanning, ECT for blower PWM generation, and SCI for HVAC panel keypad interface. The 512 KB Flash fits firmware for PID blower control, mode-door position tracking, CAN-linked setpoint reception, and diagnostics. XGATE handles the time-critical ADC scan-finished interrupt while the main core executes climate-control logic, ensuring consistent thermal response under all load conditions.
Рекомендуется
Instrument Cluster Display Controller
For instrument clusters driving TFT or segment LCD displays, the MC9S12XEQ512CAG provides the SPI throughput (up to 25 Mbit/s on S12X) to drive a TFT driver IC while running CAN-linked vehicle speed/RPM messages. The XGATE co-processor offloads display refresh DMA, freeing CPU cycles for warning-indicator logic, odometer persistence (via Flash EEPROM emulation), and diagnostic fault storage. 512 KB Flash easily holds a cluster graphics library plus J1939/CAN messaging stack for commercial vehicle clusters.
Рекомендуется
Automotive Lighting ECU
LED matrix and adaptive headlamp controllers use the MC9S12XEQ512CAG's ECT and XGATE for high-resolution PWM dimming while the main HCS12X core handles LIN/CAN messaging and fault diagnostics. The 5V-tolerant I/O interfaces directly to LED driver ICs and LIN transceivers. The 32 KB RAM accommodates fade-pattern buffers and color-mixing tables for RGB interior lighting, while 512 KB Flash supports DRL, turn signal, and adaptive beam patterns in a single firmware image.
Рекомендуется
Sensor Interface / Data Acquisition Module
Multi-channel sensor acquisition modules leverage the MC9S12XEQ512CAG's 12-bit ADC with 3 us conversion (suitable for ~300 kSPS aggregate sampling) and 144-LQFP GPIO count for parallel sensor interfacing. The XGATE co-processor executes time-stamping and DMA-style data movement to RAM buffers without main-CPU intervention, while the HCS12X core aggregates, filters, and transmits data over CAN or SPI. 32 KB RAM holds several seconds of buffered acquisition before CAN transmission.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S12XEQ512CAG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S12XEQ384CAG | MC9S12XDP512CAG | MC9S12XEP768CAG | MC9S12XDT512MAA | MC9S12A512CPVE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same |
| CPU Speed | 50 MHz | 50 MHz | 80 MHz | 50 MHz | 40 MHz | 25 MHz |
| Flash | 512 KB | 384 KB | 512 KB | 768 KB | 512 KB | 512 KB |
| RAM | 32 KB | 24 KB | 32 KB | 48 KB | 32 KB | 32 KB |
| Co-processor (XGATE) | Yes (RISC, 2x bus) | Yes | Yes | Yes | Yes | No (legacy S12A core) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C |
| Lifecycle / Series | Active / S12XE | Active / S12XE | Active / S12XD | Active / S12XE | Active / S12XD | Active / S12A (legacy) |
Ключевые отличия
- Larger Flash (512 KB) at same CPU speed vs lower-density sibling (против MC9S12XEQ384CAG)
- XGATE co-processor vs legacy S12A core (против MC9S12A512CPVE)
- Optimized 50 MHz CPU vs higher-throughput XDP variant (против MC9S12XDP512CAG)
Заметки по проектированию
Estimated: supply current at 50 MHz with all peripherals enabled is approximately 65 mA typical; with XGATE idle and main CPU halted it drops to ~25 mA. The internal voltage regulator requires a 100 nF decoupling capacitor close to VDDR/VDD1 pins and a 4.7 uF bulk cap on VDDRX. According to the NXP S12XE reference manual, the on-chip regulator must NOT be used to power external loads - isolate VDDR from external circuitry.
Estimated: the 144-LQFP (20x20 mm) package with 0.5 mm pitch demands a 4-layer stack-up with continuous ground plane under the IC for thermal dissipation and signal integrity. Place decoupling caps (100 nF X7R) within 3 mm of every VDDX/VSS pair. The EXTAL/XTAL crystal traces must be guarded by ground and kept under 10 mm length to minimize EMI radiation.
Do not leave the BKGD pin floating during reset - it must be either pulled high or driven by a programmer. According to the NXP S12XE reference manual, the XGATE co-processor firmware image is loaded into a dedicated RAM region at boot; failing to initialize the XGATE vector table causes silent XGATE interrupts. The TEST pin must be tied to VSS for normal operation - leaving it floating can latch the part into factory test mode.
Информация о соответствии
AEC-Q100 qualified for automotive applications per NXP product page. RoHS and REACH compliant. Halogen-free status not explicitly stated in the provided data.