Microchip Technology

MCP3422A6-E/MC - 18-Bit Dual-Channel ADC | Microchip

Артикул: MCP3422A6-E/MC ✓ Активен
2.048 V Vdss 8-DFN, 2 x 3 mm Package
MOQ: 1 |

MCP3422A6-E/MC Обзор

The Microchip Technology MCP3422A6-E/MC is an 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, conversion rates up to 240 samples per second, and an 8-pin DFN package measuring 2 x 3 mm. It uses a two-wire I2C interface and an onboard 2.048 V precision reference, providing a differential input range of plus or minus 2.048 V.

An analog-to-digital converter, or ADC, converts continuous analog voltage into a numerical value for measurement, control, logging, or display. A delta-sigma ADC is a voltage-to-digital converter category that uses continuous-time sampling and digital filtering to provide high resolution and good noise performance. In the broader semiconductor hierarchy, the MCP3422A6-E/MC belongs to the ADC/DAC class of data-converter integrated circuits and ultimately to the wider semiconductor category.

Key features include resolution up to 18 bits, two differential measurement channels, an onboard 2.048 V reference, bipolar differential input capability, automatic calibration, and power-on reset. The A6 selection supports a maximum conversion rate of 240 SPS according to the manufacturer documentation. Its 2-wire interface supports communication with a host controller, while the compact 8-DFN package reduces board area in space-constrained measurement systems.

The device combines a low-noise, high-accuracy delta-sigma conversion stage with differential input capability. Differential measurement rejects common-mode voltage that appears simultaneously on both inputs, which is valuable when a sensor output is referenced to a ground or supply rail. The onboard reference simplifies designs that do not require an external precision reference, while the I2C interface enables configuration and digital result transfer over only two signal connections.

Typical uses include industrial pressure and temperature acquisition, portable instrumentation, laboratory measurement, process monitoring, and low-bandwidth sensor interfaces. Differential channels can monitor bridge sensors, current-sense signals, or two related voltages when the source can be arranged so both inputs remain within the supported measurement range.

When designing the circuit, treat the analog inputs, reference, and ground connections as sensitive signal paths. Keep input traces short, place the required input and bypass capacitors close to the device pins, and provide a clean return path between the analog source and the converter. Confirm the selected gain, conversion rate, and common-mode limits against the manufacturer datasheet before fixing the front-end amplifier network.

This product page consolidates the MCP3422 family architecture, verified electrical characteristics, drop-in family alternatives, application guidance, and PCB implementation notes into a design-focused reference for engineers evaluating the MCP3422A6-E/MC.

Аналоги без доработки для MCP3422A6-E/MC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MCP3422A6-E/MC (тот же форм-фактор и посадочное место) — отличается по Differential Input Range, Package, Maximum Conversion Rate, Resolution, Automotive Qualification.

Microchip Technology
Maximum Conversion Rate: 240 samples per second
Resolution: 18 bits
Microchip Technology
Differential Input Range: Plus or minus 2.048 V
Package: 8-VFDFN exposed pad, 2 mm x 3 mm
Maximum Conversion Rate: 240 samples per second
Microchip Technology
Differential Input Range: -2.048 V to +2.048 V
Package: 8-pin DFN (2 mm x 3 mm)
Resolution: 18 bits

MCP3422A4T-E/MC

✅ Прямая замена
📦 8-DFN (2 x 3 mm)
Same 8-DFN footprint and terminals; gain and conversion configuration differ from the A6 option

📋 Справочный аналог (нет в каталоге)

MCP3422A3-E/MC

✅ Прямая замена
Microchip Technology
📦 8-DFN (2 x 3 mm)
Delta-sigma ADC · 18 bits · 2 channels · Differential · I2C · 2.048 V · -2.048 V to +2.048 V · 2.7 V to 5.5 V

Уточнить цену

Открыть даташит →

MCP3422A2-E/MC

✅ Прямая замена
Microchip Technology
📦 8-DFN (2 x 3 mm)
Delta-sigma ADC · 18 bit · 2 differential channels · Differential inputs · 2.7 V to 5.5 V · 2.048 V · Plus or minus 2.048 V · 240 samples per second

Уточнить цену

Открыть даташит →

MCP3422A1-E/MC

✅ Прямая замена
Microchip Technology
📦 8-DFN (2 x 3 mm)
Delta-sigma ADC · 18 bits · 2 channels · Differential · 240 samples per second · 2.048 V · ±2.048 V · 2.7 V

Уточнить цену

Открыть даташит →

MCP3422A5-E/MC

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 8-DFN (2 x 3 mm)
Sigma-delta analog-to-digital converter · 18 bit · 2 inputs · 3.75 samples/s · 2.7 V to 5.5 V · I2C · Onboard voltage reference · 8-DFN, 2 mm x 3 mm

Уточнить цену

Открыть даташит →

MCP3422A6-E/MC Максимальные параметры и электрические характеристики

ADC Resolution Up to 18 bits
Number of Analog Input Channels 2 channels
Input Architecture Differential inputs
Converter Type Delta-sigma ADC
Maximum Conversion Rate 240 SPS
Onboard Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Full-Scale Differential Range 4.096 V
Digital Interface I2C, 2-wire
Input Polarity Bipolar differential input
Automatic Calibration Supported
Power-On Reset Supported
Диапазон рабочих температур -40°C to +125°C
Корпус 8-DFN, 2 x 3 mm
Число выводов 8 pins
Тип монтажа Surface mount
Automotive Qualification AEC-Q100

Руководство по цоколевке MCP3422A6-E/MC в корпусе 8-dfn, 2 x 3 mm

Цоколевка для MCP3422A6-E/MC (корпус 8-dfn, 2 x 3 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-dfn, 2 x 3 mm для MCP3422A6-E/MC

Нет подробных данных о распиновке для MCP3422A6-E/MC.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MCP3422A6-E/MC подходит для 6 применениеs: Industrial Pressure Sensor Acquisition, Portable Environmental Monitoring, Precision Current-Sense Measurement, Laboratory Sensor Interface, Process Control Monitoring, Automotive Sensor Interface.

🏭

Industrial Pressure Sensor Acquisition

The MCP3422A6-E/MC suits low-speed industrial pressure measurements where an 18-bit conversion result and differential input stage are more valuable than high sample throughput. Its two differential channels can monitor a bridge sensor and a reference or status channel, while the 2.048 V onboard reference establishes a stable conversion scale. The 240 SPS maximum rate provides useful responsiveness without imposing the timing demands of a high-speed SAR ADC. In an industrial transmitter, place the converter close to the bridge excitation and sensing network, use a single low-noise ground path, and verify common-mode voltage and conversion latency against the selected gain.

🧩

Portable Environmental Monitoring

The MCP3422A6-E/MC is appropriate for compact environmental monitors that periodically measure slow temperature, humidity, gas, or light signals. Its two differential channels reduce the number of converters required when related sensor outputs can be measured sequentially, and the onboard 2.048 V reference simplifies the voltage chain. Because the device reaches 240 SPS, it can also track moderately changing signals rather than serving only as a static meter. For a battery-powered instrument, use the I2C interface to retain the device between samples when the manufacturer permits it, and account for pull-up current, sensor excitation duty cycle, and temperature drift during the power budget.

⚡

Precision Current-Sense Measurement

The MCP3422A6-E/MC can acquire low-level shunt voltage when the shunt signal is arranged differentially and remains within the converter's supported common-mode and input range. The 18-bit nominal resolution can preserve small changes across a narrow measurement window, while differential inputs help reject supply or ground disturbance appearing equally on both leads. Two channels allow a current measurement and a complementary diagnostic input to be sampled through the same converter. The analog path should use a Kelvin connection where practical, keep the shunt amplifier close to the ADC, and validate gain error and offset calibration against the production temperature range.

🔧

Laboratory Sensor Interface

The MCP3422A6-E/MC gives laboratory-style sensor interfaces a compact converter with up to 18-bit resolution, differential input capability, and a maximum conversion rate of 240 SPS. It is useful for thermocouple bridges, strain-gauge conditioning, potentiometric probes, and slow laboratory signals that benefit from noise filtering rather than very high conversion frequency. The onboard reference allows a self-contained measurement channel, and the I2C interface simplifies connection to an embedded controller. For best repeatability, allow the analog front end to settle after configuration changes, perform calibration with the production hardware, and separate the reference and sensitive input returns from switching-node currents.

🏭

Process Control Monitoring

The MCP3422A6-E/MC can form a compact process-monitoring node for pressure, level, flow, or valve-position feedback. Two differential channels provide flexibility for pairing related measurements without requiring separate converter footprints, and the 240 SPS maximum rate is appropriate for many closed-loop variables that change over seconds rather than milliseconds. The I2C interface allows the controller to read results and reconfigure the converter over a short bus. System design should include input protection appropriate to the industrial environment, verify the common-mode range at every operating point, and use calibrated scaling from the 2.048 V reference to maintain measurement traceability.

🚗

Automotive Sensor Interface

The MCP3422A6-E/MC is identified as an AEC-Q100-qualified option and can support low-speed automotive sensing functions where two differential channels and high nominal resolution are useful. Potential uses include pressure, position, temperature, and mixed analog monitoring when the associated signal chain operates within the device limits. The 2 x 3 mm 8-DFN package supports compact sensor modules, while the 2.048 V reference and I2C interface simplify digital integration. Automotive implementation still requires careful handling of transient voltage, ground offsets, EMI, and temperature. Confirm the exact qualification status, electrical limits, and ordering configuration in the manufacturer documents before production release.

What are the key specifications of MCP3422A6-E/MC that engineers should know?
The MCP3422A6-E/MC is an 18-bit, dual-channel delta-sigma ADC with differential inputs, a 2.048 V onboard reference, and a 240 SPS maximum conversion rate. According to the Microchip Technology manufacturer datasheet, the device uses a two-wire I2C interface and accepts bipolar differential input signals. It is packaged in an 8-DFN package measuring 2 x 3 mm and is identified as AEC-Q100 qualified. These characteristics make it appropriate for precision low-bandwidth measurements where resolution, common-mode rejection, and compact size matter more than very high sampling speed.
What is the operating voltage of MCP3422A6-E/MC?
The operating supply voltage must be taken from the MCP3422 manufacturer datasheet before finalizing the circuit. The manufacturer documentation identifies the MCP3422A6-E/MC as a 2.7 V-class device in the family comparison information, while the exact minimum and maximum supply ratings are not reproduced on this page. Use the device data sheet for absolute maximum and recommended operating conditions, and size the bypass capacitors and level-shifting interface around the selected supply voltage.
Where can I download the MCP3422A6-E/MC datasheet PDF?
The official MCP3422A6-E/MC datasheet can be obtained through the Microchip Technology MCP3422 product page linked on this page. The manufacturer describes the MCP3422 family as a two-channel, low-noise, high-accuracy delta-sigma ADC with differential inputs, resolution up to 18 bits, a 2.048 V onboard reference, and an I2C interface. Download the current manufacturer document and verify the A6 gain, conversion-rate, electrical-characteristics, and package-drawing sections before releasing a PCB layout.
Where can I find the MCP3422A6-E/MC pinout and 8-DFN footprint?
Use the pin-description table and package drawing in the Microchip Technology MCP3422 manufacturer datasheet to assign the 8-DFN connections and land pattern. The target device is an 8-DFN package measuring 2 x 3 mm, so its exposed thermal or electrical pad requirements must be reviewed carefully. The MCP3422A6-E/MC is also available in other package or ordering configurations, making the exact suffix important when comparing pin drawings rather than relying only on the base device name.
What is the difference between MCP3422A6-E/MC and MCP3422A4T-E/MC?
The MCP3422A6-E/MC and MCP3422A4T-E/MC are members of the same MCP3422 conversion family and use the same 8-DFN form factor for the MC ordering option. The available comparison identifies their terminals and packages as consistent and characterizes them as complete replacements without circuit modification. Their principal distinction is the internal gain or conversion configuration represented by the A6 and A4T identifiers, so verify the exact gain, full-scale range, and conversion-rate requirements against the manufacturer datasheet before substitution.
MCP3422A6-E/MC vs MCP3422A3-E/MC — which is better for precision measurement?
The MCP3422A6-E/MC is preferable when the design needs the family's 240 SPS conversion-rate option, while the MCP3422A3-E/MC should be considered when its lower-speed configuration provides sufficient response time. Both are 18-bit, dual-channel MCP3422-family delta-sigma converters with differential inputs, a 2.048 V reference, and an 8-DFN MC package. Choose by matching gain, conversion latency, input bandwidth, and noise requirements to the sensor rather than by resolution alone, since both devices share the same nominal resolution.
When should I choose MCP3422A6-E/MC over MCP3422A2-E/MC?
Choose the MCP3422A6-E/MC when the measurement requires the A6 family's 240 SPS conversion capability or its associated gain configuration. The MCP3422A2-E/MC may be preferable for applications that do not need that conversion speed and can operate within the A2 gain and noise limits. Both devices provide 18-bit nominal resolution, two differential channels, an onboard 2.048 V reference, and an I2C interface. The correct choice depends on the sensor bandwidth, required latency, and allowable conversion error.
Is MCP3422A6-E/MC suitable for industrial sensor acquisition?
Yes, the MCP3422A6-E/MC is suitable for many industrial sensor-acquisition designs requiring moderate speed and high resolution. It offers two differential channels, up to 18 bits of resolution, a 240 SPS maximum conversion rate, and an operating temperature range of -40°C to +125°C. Differential inputs help reject common-mode disturbance when sensing bridges or low-level transducers. The analog front end must still ensure that signal levels, common-mode voltage, noise, grounding, and bandwidth remain within the manufacturer limits.
What can replace MCP3422A6-E/MC without changing the PCB?
The closest verified replacements are pin-compatible MCP3422 family members in the 8-DFN MC package, including MCP3422A4T-E/MC, MCP3422A3-E/MC, MCP3422A2-E/MC, MCP3422A1-E/MC, and MCP3422A5-E/MC. The manufacturer-family comparison describes the A4T-E/MC as a complete replacement with consistent terminals and packages. Verify the gain, conversion rate, input range, and I2C behavior for every substitution because the ordering code identifies functional configuration differences even when the footprint is unchanged.
Is MCP3422A6-E/MC the same as MCP3422A4T-E/MC?
The MCP3422A6-E/MC and MCP3422A4T-E/MC are not identical in every functional parameter, but they are pin- and package-compatible options within the MCP3422 family when both use the MC package suffix. The manufacturer-family comparison identifies consistent terminals and packages and describes the A4T-E/MC as a complete replacement for the A6-E/MC. Firmware should still use the gain and conversion behavior appropriate to the selected ordering code, and analog calibration should be repeated after changing parts.
What is the best Microchip equivalent for MCP3422A6-E/MC?
The best Microchip equivalent depends on the required gain and conversion behavior, but MCP3422A4T-E/MC is the strongest directly documented candidate in the same 8-DFN MC package. The manufacturer-family comparison states that its terminals and packages are consistent and that replacement does not require modification of the existing circuit. Confirm the A6 and A4T gain definitions, conversion-rate limits, electrical limits, and I2C command behavior before approving it as an equivalent.
Is there a verified cross-brand drop-in replacement for MCP3422A6-E/MC?
No cross-brand drop-in replacement is established for the MCP3422A6-E/MC. A valid replacement must match the 8-DFN footprint and pin functions while preserving the 18-bit conversion performance, differential input behavior, 2.048 V reference, I2C interface, and required conversion rate. The available cross-reference results do not identify a qualified competitor with all those conditions. Use the Microchip MCP3422 family options for immediate PCB-compatible evaluation and request a detailed sourcing review for any proposed cross-brand substitution.
Where to buy MCP3422A6-E/MC online?
Use the Request a Quote form on this page to request MCP3422A6-E/MC availability, current commercial terms, and lead time. The part is an 8-DFN, 2 x 3 mm device from Microchip Technology, so the quote should identify the exact suffix MCP3422A6-E/MC rather than the broader MCP3422 family. Confirm the desired tube or other delivery format, production quantity, and required traceability when submitting the request.
What is the price of MCP3422A6-E/MC?
Use the Request a Quote form on this page for the current MCP3422A6-E/MC price and quantity schedule. Pricing can vary with order quantity, package or delivery format, traceability requirements, and market conditions, so the structured commercial panel should be treated as the current purchasing channel. Provide the annual and prototype quantities, assembly schedule, and requested package format in the quote request for the most useful response.
What is the lead time for MCP3422A6-E/MC?
Request the current MCP3422A6-E/MC lead time through the Request a Quote form on this page. Lead time depends on the selected delivery format, order quantity, and factory schedule rather than only on the ADC specifications. Include your required build dates and target monthly usage so the commercial response can distinguish prototype availability from production planning. Confirm the quoted MPN, package option, and traceability requirements before accepting the schedule.
How much power does MCP3422A6-E/MC consume?
The exact supply current depends on the operating mode, conversion rate, supply voltage, and selected gain configuration. According to the Microchip Technology manufacturer datasheet, the MCP3422A6-E/MC supports a maximum conversion rate of 240 SPS, so continuous conversion generally consumes more power than a design that initiates occasional samples. Use the manufacturer current-consumption table for both active and idle states, then include the I2C pull-up current and analog front-end consumption when estimating total system power.

Справочные инженерные данные для MCP3422A6-E/MC — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MCP3422A6-E/MC for low-bandwidth precision measurements that need two differential channels, up to 18-bit nominal resolution, an onboard 2.048 V reference, and up to 240 SPS conversion speed. Select MCP3422A4T-E/MC when its documented gain and conversion configuration satisfies the measurement while retaining the same 8-DFN terminals. MCP3422A3-E/MC, MCP3422A2-E/MC, and MCP3422A1-E/MC remain useful family alternatives when their individual gain, timing, and noise characteristics are appropriate. Do not substitute MCP3422A6-E/MS into the MC board because MS uses an 8-SOIC package. For every alternative, verify supply limits, common-mode range, conversion timing, calibration behavior, and I2C configuration before production.

Сравнение с аналогами

Параметр Этот товар MCP3422A4T-E/MC MCP3422A3-E/MC MCP3422A2-E/MC MCP3422A1-E/MC
Package 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
ADC Resolution Up to 18 bits Up to 18 bits Up to 18 bits Up to 18 bits Up to 18 bits
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Converter Architecture Delta-sigma Delta-sigma Delta-sigma Delta-sigma Delta-sigma
Onboard Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Digital Interface I2C, 2-wire I2C, 2-wire I2C, 2-wire I2C, 2-wire I2C, 2-wire

Ключевые отличия

  • Higher conversion-rate option within the same compact family (против MCP3422A3-E/MC)
  • Direct package-compatible family substitution (против MCP3422A4T-E/MC)
  • Compact differential measurement in a 2 x 3 mm footprint (против MCP3422A6-E/MS)

Заметки по проектированию

Place the MCP3422A6-E/MC close to the sensor or analog front end, and route VIN-, VIN+, and the analog ground return as short, quiet nets. The 2 x 3 mm 8-DFN footprint leaves little room for long escape traces, particularly for the exposed pad. Follow the manufacturer land-pattern and thermal-pad guidance exactly, including via placement and paste geometry. Differential pairs should be routed with consistent geometry where the board permits, and switching-regulator traces should remain on the opposite side of the board.

Treat the analog inputs as high-impedance nodes and prevent leakage through board contamination, long test pads, or adjacent high-impedance nets. The MCP3422 family performs differential conversion, so common-mode voltage and input settling must remain within the manufacturer limits for the selected gain. Use a low-leakage protection network when necessary and avoid placing relay contacts or moisture-sensitive contamination paths near the input pins. Confirm that any front-end amplifier can drive the ADC's sampling network during each conversion.

Provide the manufacturer's recommended local bypass capacitance at the supply pins and route it through a short return path to the device ground. The exact capacitance, ESR limits, and supply-voltage range must be taken from the MCP3422 manufacturer datasheet rather than inferred from other ADC families. Keep the I2C pull-up resistors close to the bus master when appropriate, and account for their static current as well as the ADC's active and idle currents in a low-power instrument.

Do not confuse the MC package suffix with the MS or SN ordering options; MCP3422A6-E/MS uses an 8-SOIC package and is not a footprint-compatible replacement for the 2 x 3 mm 8-DFN target. Likewise, changing between A1, A2, A3, A4T, A5, and A6 variants may alter gain, conversion speed, or timing even when the land pattern is unchanged. After any substitution, repeat offset and gain calibration and verify the converter configuration in firmware.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The MCP3422A6-E/MC is identified as AEC-Q100 qualified in the manufacturer-family technical listing. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current Microchip material declaration.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MCP3422A6-E/MC MCP3422A6-E/MC datasheet MCP3422A6-E/MC pinout MCP3422A6-E/MC equivalent MCP3422A6-E/MC replacement MCP3422A6-E/MC vs MCP3422A4T-E/MC MCP3422A6-E/MC price MCP3422A6-E/MC stock Microchip MCP3422A6-E/MC MCP3422A6-E/MC 18-bit ADC MCP3422A6-E/MC 8-DFN footprint MCP3422A6-E/MC differential input application

Связанные компоненты & термины

Microchip Technology MCP3422A6-E/MC MCP3422 MCP3422A4T-E/MC MCP3422A3-E/MC MCP3422A2-E/MC MCP3422A1-E/MC MCP3422A5-E/MC analog-to-digital converter ADC delta-sigma ADC data-converter integrated circuit semiconductor differential input 18-bit resolution 2.048 V reference I2C interface two-wire interface 8-DFN package surface mount AEC-Q100 industrial sensor acquisition automotive sensor interface pressure sensor current-sense measurement
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ