MCP3422A6-E/MC - 18-Bit Dual-Channel ADC | Microchip
MPN: MCP3422A6-E/MC ✓ 啟用中MCP3422A6-E/MC 概覽
An analog-to-digital converter, or ADC, converts continuous analog voltage into a numerical value for measurement, control, logging, or display. A delta-sigma ADC is a voltage-to-digital converter category that uses continuous-time sampling and digital filtering to provide high resolution and good noise performance. In the broader semiconductor hierarchy, the MCP3422A6-E/MC belongs to the ADC/DAC class of data-converter integrated circuits and ultimately to the wider semiconductor category.
Key features include resolution up to 18 bits, two differential measurement channels, an onboard 2.048 V reference, bipolar differential input capability, automatic calibration, and power-on reset. The A6 selection supports a maximum conversion rate of 240 SPS according to the manufacturer documentation. Its 2-wire interface supports communication with a host controller, while the compact 8-DFN package reduces board area in space-constrained measurement systems.
The device combines a low-noise, high-accuracy delta-sigma conversion stage with differential input capability. Differential measurement rejects common-mode voltage that appears simultaneously on both inputs, which is valuable when a sensor output is referenced to a ground or supply rail. The onboard reference simplifies designs that do not require an external precision reference, while the I2C interface enables configuration and digital result transfer over only two signal connections.
Typical uses include industrial pressure and temperature acquisition, portable instrumentation, laboratory measurement, process monitoring, and low-bandwidth sensor interfaces. Differential channels can monitor bridge sensors, current-sense signals, or two related voltages when the source can be arranged so both inputs remain within the supported measurement range.
When designing the circuit, treat the analog inputs, reference, and ground connections as sensitive signal paths. Keep input traces short, place the required input and bypass capacitors close to the device pins, and provide a clean return path between the analog source and the converter. Confirm the selected gain, conversion rate, and common-mode limits against the manufacturer datasheet before fixing the front-end amplifier network.
This product page consolidates the MCP3422 family architecture, verified electrical characteristics, drop-in family alternatives, application guidance, and PCB implementation notes into a design-focused reference for engineers evaluating the MCP3422A6-E/MC.
直接替換替代品,適用於 MCP3422A6-E/MC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MCP3422A6-E/MC (相同外形與佔位) — 差異在於 Differential Input Range, Package, Maximum Conversion Rate, Resolution, Automotive Qualification.
MCP3422A4T-E/MC
✅ 直接替換📋 參考替代品(不在目錄中)
MCP3422A3-E/MC
✅ 直接替換聯絡詢價
查看資料表 →MCP3422A2-E/MC
✅ 直接替換聯絡詢價
查看資料表 →MCP3422A1-E/MC
✅ 直接替換聯絡詢價
查看資料表 →MCP3422A5-E/MC
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3422A6-E/MC 最大額定值與電氣特性
| ADC Resolution | Up to 18 bits |
| Number of Analog Input Channels | 2 channels |
| Input Architecture | Differential inputs |
| Converter Type | Delta-sigma ADC |
| Maximum Conversion Rate | 240 SPS |
| Onboard Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Full-Scale Differential Range | 4.096 V |
| Digital Interface | I2C, 2-wire |
| Input Polarity | Bipolar differential input |
| Automatic Calibration | Supported |
| Power-On Reset | Supported |
| 工作溫度範圍 | -40°C to +125°C |
| 封裝 | 8-DFN, 2 x 3 mm |
| 腳位數 | 8 pins |
| 安裝類型 | Surface mount |
| Automotive Qualification | AEC-Q100 |
MCP3422A6-E/MC 8-dfn, 2 x 3 mm 腳位配置指南
MCP3422A6-E/MC(8-dfn, 2 x 3 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3422A6-E/MC.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3422A6-E/MC 適用於 6 應用s: Industrial Pressure Sensor Acquisition, Portable Environmental Monitoring, Precision Current-Sense Measurement, Laboratory Sensor Interface, Process Control Monitoring, Automotive Sensor Interface.
Industrial Pressure Sensor Acquisition
The MCP3422A6-E/MC suits low-speed industrial pressure measurements where an 18-bit conversion result and differential input stage are more valuable than high sample throughput. Its two differential channels can monitor a bridge sensor and a reference or status channel, while the 2.048 V onboard reference establishes a stable conversion scale. The 240 SPS maximum rate provides useful responsiveness without imposing the timing demands of a high-speed SAR ADC. In an industrial transmitter, place the converter close to the bridge excitation and sensing network, use a single low-noise ground path, and verify common-mode voltage and conversion latency against the selected gain.
推薦
Portable Environmental Monitoring
The MCP3422A6-E/MC is appropriate for compact environmental monitors that periodically measure slow temperature, humidity, gas, or light signals. Its two differential channels reduce the number of converters required when related sensor outputs can be measured sequentially, and the onboard 2.048 V reference simplifies the voltage chain. Because the device reaches 240 SPS, it can also track moderately changing signals rather than serving only as a static meter. For a battery-powered instrument, use the I2C interface to retain the device between samples when the manufacturer permits it, and account for pull-up current, sensor excitation duty cycle, and temperature drift during the power budget.
推薦
Precision Current-Sense Measurement
The MCP3422A6-E/MC can acquire low-level shunt voltage when the shunt signal is arranged differentially and remains within the converter's supported common-mode and input range. The 18-bit nominal resolution can preserve small changes across a narrow measurement window, while differential inputs help reject supply or ground disturbance appearing equally on both leads. Two channels allow a current measurement and a complementary diagnostic input to be sampled through the same converter. The analog path should use a Kelvin connection where practical, keep the shunt amplifier close to the ADC, and validate gain error and offset calibration against the production temperature range.
推薦
Laboratory Sensor Interface
The MCP3422A6-E/MC gives laboratory-style sensor interfaces a compact converter with up to 18-bit resolution, differential input capability, and a maximum conversion rate of 240 SPS. It is useful for thermocouple bridges, strain-gauge conditioning, potentiometric probes, and slow laboratory signals that benefit from noise filtering rather than very high conversion frequency. The onboard reference allows a self-contained measurement channel, and the I2C interface simplifies connection to an embedded controller. For best repeatability, allow the analog front end to settle after configuration changes, perform calibration with the production hardware, and separate the reference and sensitive input returns from switching-node currents.
推薦
Process Control Monitoring
The MCP3422A6-E/MC can form a compact process-monitoring node for pressure, level, flow, or valve-position feedback. Two differential channels provide flexibility for pairing related measurements without requiring separate converter footprints, and the 240 SPS maximum rate is appropriate for many closed-loop variables that change over seconds rather than milliseconds. The I2C interface allows the controller to read results and reconfigure the converter over a short bus. System design should include input protection appropriate to the industrial environment, verify the common-mode range at every operating point, and use calibrated scaling from the 2.048 V reference to maintain measurement traceability.
推薦
Automotive Sensor Interface
The MCP3422A6-E/MC is identified as an AEC-Q100-qualified option and can support low-speed automotive sensing functions where two differential channels and high nominal resolution are useful. Potential uses include pressure, position, temperature, and mixed analog monitoring when the associated signal chain operates within the device limits. The 2 x 3 mm 8-DFN package supports compact sensor modules, while the 2.048 V reference and I2C interface simplify digital integration. Automotive implementation still requires careful handling of transient voltage, ground offsets, EMI, and temperature. Confirm the exact qualification status, electrical limits, and ordering configuration in the manufacturer documents before production release.
推薦
推薦產品摘要
工程參考資料,適用於 MCP3422A6-E/MC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3422A4T-E/MC | MCP3422A3-E/MC | MCP3422A2-E/MC | MCP3422A1-E/MC |
|---|---|---|---|---|---|
| Package | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| ADC Resolution | Up to 18 bits | Up to 18 bits | Up to 18 bits | Up to 18 bits | Up to 18 bits |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Converter Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Onboard Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Digital Interface | I2C, 2-wire | I2C, 2-wire | I2C, 2-wire | I2C, 2-wire | I2C, 2-wire |
主要差異化特點
- Higher conversion-rate option within the same compact family (對比MCP3422A3-E/MC)
- Direct package-compatible family substitution (對比MCP3422A4T-E/MC)
- Compact differential measurement in a 2 x 3 mm footprint (對比MCP3422A6-E/MS)
設計說明
Place the MCP3422A6-E/MC close to the sensor or analog front end, and route VIN-, VIN+, and the analog ground return as short, quiet nets. The 2 x 3 mm 8-DFN footprint leaves little room for long escape traces, particularly for the exposed pad. Follow the manufacturer land-pattern and thermal-pad guidance exactly, including via placement and paste geometry. Differential pairs should be routed with consistent geometry where the board permits, and switching-regulator traces should remain on the opposite side of the board.
Treat the analog inputs as high-impedance nodes and prevent leakage through board contamination, long test pads, or adjacent high-impedance nets. The MCP3422 family performs differential conversion, so common-mode voltage and input settling must remain within the manufacturer limits for the selected gain. Use a low-leakage protection network when necessary and avoid placing relay contacts or moisture-sensitive contamination paths near the input pins. Confirm that any front-end amplifier can drive the ADC's sampling network during each conversion.
Provide the manufacturer's recommended local bypass capacitance at the supply pins and route it through a short return path to the device ground. The exact capacitance, ESR limits, and supply-voltage range must be taken from the MCP3422 manufacturer datasheet rather than inferred from other ADC families. Keep the I2C pull-up resistors close to the bus master when appropriate, and account for their static current as well as the ADC's active and idle currents in a low-power instrument.
Do not confuse the MC package suffix with the MS or SN ordering options; MCP3422A6-E/MS uses an 8-SOIC package and is not a footprint-compatible replacement for the 2 x 3 mm 8-DFN target. Likewise, changing between A1, A2, A3, A4T, A5, and A6 variants may alter gain, conversion speed, or timing even when the land pattern is unchanged. After any substitution, repeat offset and gain calibration and verify the converter configuration in firmware.
合規資訊
The MCP3422A6-E/MC is identified as AEC-Q100 qualified in the manufacturer-family technical listing. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current Microchip material declaration.