Microchip Technology

MCP3426A7-E/SN - 16-Bit Dual-Channel ADC | Microchip

Артикул: MCP3426A7-E/SN ✓ Активен
2.048 V Vdss 8-pin SOIC, 3.90 mm width Package
MOQ: 1 |

MCP3426A7-E/SN Обзор

The Microchip Technology MCP3426A7-E/SN is a 16-bit, dual-channel delta-sigma analog-to-digital converter with a conversion rate of 15 samples per second, differential inputs, and an integrated 2.048 V precision reference. It is packaged in an 8-pin SOIC and operates from 2.7 V to 5.5 V.

A delta-sigma analog-to-digital converter is an ADC architecture that uses continuous-time oversampling and digital filtering to convert analog voltages into high-resolution digital codes. In the broader semiconductor hierarchy, the MCP3426 belongs to the ADC/DAC class, then to data converters, and finally to analog and mixed-signal integrated circuits. Its differential input architecture helps reject common-mode noise when measuring low-level sensor signals.

Key features include up to 16-bit resolution, two analog input channels, one sigma-delta conversion channel, and a 2.048 V onboard reference supporting a differential input range of ±2.048 V. The I2C interface supports digital communication with a host processor, while the low-noise architecture is intended for precision measurements where slow-changing signals provide high conversion effectiveness.

The MCP3426 family is designed for low-bandwidth instrumentation rather than high-speed waveform capture. The A7 speed grade performs 15 conversions per second, making it appropriate for temperature, pressure, chemical, load-cell, and industrial process measurements. The 2.7 V to 5.5 V supply range permits operation from common 3.3 V and 5 V systems, and the wide temperature range supports industrial and automotive environments.

Typical uses include bridge-sensor excitation and readout, battery monitoring, current sensing, potentiometer measurement, and environmental sensor interfaces. Differential signal measurement is particularly useful when a sensor output is referenced to a nearby analog ground or when the measured signal contains significant common-mode voltage.

PCB implementation should prioritize a quiet analog ground, short input traces, and separation from switching converters and high-current digital paths. Place the input bypass capacitor close to VDD and use the pin-description table in the manufacturer datasheet when assigning tracks. The effective input bandwidth must remain consistent with the selected conversion mode and digital filter.

This page combines manufacturer specifications, application guidance, parameter comparisons, and drop-in guidance to support component selection, PCB implementation, and sourcing for the MCP3426A7-E/SN.

Аналоги без доработки для MCP3426A7-E/SN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MCP3426A7-E/SN (тот же форм-фактор и посадочное место) — отличается по ADC Type, Differential Input Range, Number of Input Channels, Package.

Microchip Technology
ADC Type: Delta-sigma ADC
Differential Input Range: ±2.048 V differential
Number of Input Channels: 2

MCP3426A6-E/SN

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-pin SOIC
Conversion rate is approximately 13.75 samples/s versus 15 samples/s, a reduction of about 8%, while retaining the MCP3426 architecture and 8-pin SOIC footprint.

📋 Справочный аналог (нет в каталоге)

MCP3426A5-E/SN

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 8-pin SOIC
Sigma-delta ADC · 16 bit · 2 channels · 1 ADC · Differential · 15 SPS · 2.048 V · ±2.048 V

Уточнить цену

Открыть даташит →

MCP3426A3-E/SN

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-pin SOIC
Conversion rate is approximately 5 samples/s versus 15 samples/s, a reduction of about 67%, but it retains the same MCP3426 family pinout and package.

📋 Справочный аналог (нет в каталоге)

MCP3426A2-E/SN

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 8-pin SOIC
Up to 16 bits · 2 channels · Differential inputs · 16-bit delta-sigma ADC · 15 SPS · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Уточнить цену

Открыть даташит →

MCP3426A1-E/SN

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 8-pin SOIC
Delta-sigma ADC · Up to 16 bits · 2 · Differential · 15 samples/s · 2.048 V · ±2.048 V differential · 2.7 V to 5.5 V

Уточнить цену

Открыть даташит →

MCP3426A7-E/SN Максимальные параметры и электрические характеристики

ADC Type 16-bit delta-sigma ADC
Number of Input Channels 2 analog input channels
Conversion Architecture 1 sigma-delta conversion channel
Conversion Rate 15 samples/s
Разрешение Up to 16 bits
Input Type Differential
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Supply Voltage Range 2.7 V to 5.5 V
Диапазон рабочих температур -55 °C to +125 °C
Корпус 8-pin SOIC, 3.90 mm width
Terminal Count 8 terminals
Тип монтажа Surface mount
Package Code SOIC
Package Shape Rectangular
Интерфейс I2C

Конфигурация выводов MCP3426A7-E/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Контакт 1 VIN+ — Positive differential analog input
Контакт 2 VIN- — Negative differential analog input
Контакт 3 VREF — External or internal reference node
Контакт 4 VSS — Analog ground
Контакт 5 SCL — I2C clock input
Контакт 6 SDA — I2C bidirectional data line
Контакт 7 CS — Chip-select input
Контакт 8 VDD — Positive supply voltage

Типичное применение

MCP3426A7-E/SN подходит для 6 применениеs: Precision Temperature Measurement, Pressure and Load-Cell Instrumentation, Battery and Power Rail Monitoring, Current Sensing with Shunt Amplifier, Chemical and Environmental Sensor Interface, Industrial Process and Potentiometer Readout.

🌡️

Precision Temperature Measurement

The MCP3426A7-E/SN is well suited to slow-changing temperature signals because its 15 samples/s conversion rate provides substantially more updates than the A1 and A2 speed grades. A 16-bit conversion path can preserve small changes from RTDs, thermistors, and digital temperature sensors after suitable excitation or conditioning. The two differential inputs allow one channel to monitor a temperature sensor while the second supports a reference, offset, or another sensor. Use the integrated 2.048 V reference when the sensor chain is ratiometric, and keep analog traces away from switching supplies. The main design trade-off is that a delta-sigma converter cannot capture fast transients; select a different ADC architecture if the temperature signal contains high-frequency components.

🏭

Pressure and Load-Cell Instrumentation

Bridge-based pressure and load-cell systems benefit from the MCP3426A7-E/SN's differential inputs, up to 16-bit resolution, and 15 samples/s throughput. Two differential channels can support a full bridge and a reference or temperature-compensation input. Because the output codes remain useful for mechanically slow signals, the converter provides stable measurements without the power and complexity of a high-speed SAR ADC. Place the bridge excitation and input-return paths away from motor and relay currents, and use a quiet analog-ground region around the converter. Verify input settling and acquisition timing against the selected conversion mode, as these can determine whether the A7 speed grade is necessary.

⚡

Battery and Power Rail Monitoring

The MCP3426A7-E/SN can monitor slowly varying supply or battery voltages using its differential inputs and integrated 2.048 V reference. The 2.7 V to 5.5 V operating range permits deployment in 3.3 V and 5 V systems, while 15 samples/s is sufficient for supervisory trends, energy accounting, and fault logging. A scaled voltage divider can feed one input and a known reference can feed the other when differential ratiometric compensation is useful. Protect the input network from transients and ensure divider resistance keeps measurement leakage within the device's input-current expectations. Because this is a low-speed converter, a sampled monitoring application is preferable to one requiring instantaneous detection of a fast transient.

🔋

Current Sensing with Shunt Amplifier

The MCP3426A7-E/SN can digitize the differential voltage generated by a low-ohm shunt and current-sense amplifier. Its two differential channels allow simultaneous measurement of the load current and a voltage, temperature, or reference signal. At 15 samples/s, the converter suits motor current, battery current, and power-system monitoring where the measured current changes more slowly than the device's minimum acquisition interval. The differential input arrangement helps reject supply and ground noise common to both inputs. Choose a shunt and amplifier with suitable offset, gain, bandwidth, and common-mode ratings, then verify that the converter's input range is not exceeded during overload or startup conditions.

🧩

Chemical and Environmental Sensor Interface

The MCP3426A7-E/SN is appropriate for electrochemical, gas, humidity, and conductivity sensors whose outputs vary slowly enough for delta-sigma conversion. Its two differential channels can read a sensor output and a compensation or reference signal, while the internal 2.048 V reference supports ratiometric measurement of potentiometric sensors. The 16-bit resolution can resolve small changes from high-impedance sensing elements when the complete analog front end is designed for low leakage and noise. Use guarding and short analog traces to reduce leakage, keep contaminants away from sensitive nodes, and follow the sensor manufacturer's grounding recommendations. Verify the conversion rate against the application's required reaction time.

🎛️

Industrial Process and Potentiometer Readout

The MCP3426A7-E/SN can read potentiometers, resistive dividers, and slow process-control sensors through an I2C-connected analog front end. Its 15 samples/s conversion rate is more than adequate for position feedback, setpoint monitoring, and panel controls that do not require rapid updates. Two analog channels allow multiplexing through suitable front-end circuitry or simultaneous monitoring of a control and feedback element. The onboard 2.048 V reference simplifies ratiometric excitation of resistive sensors, while the differential inputs offer flexibility when the measured node is offset. Keep the sensor return path close to the converter ground and avoid routing input nets beneath switching-regulator areas. Confirm the input settling requirements for the selected conversion mode.

Сводка рекомендуемых товаров

MCP3426A6-E/SN Same-family lower-speed option for slow temperature signals Используется в: Precision Temperature Measurement, Pressure and Load-Cell Instrumentation, Current Sensing with Shunt Amplifier, Industrial Process and Potentiometer Readout MCP3426A5-E/SN Microchip Technology Используется в: Precision Temperature Measurement, Battery and Power Rail Monitoring, Chemical and Environmental Sensor Interface MCP3426A3-E/SN Same-family ADC for very slow load-cell signals Используется в: Pressure and Load-Cell Instrumentation, Current Sensing with Shunt Amplifier MCP3426A2-E/SN Microchip Technology Используется в: Battery and Power Rail Monitoring, Industrial Process and Potentiometer Readout MCP3426A1-E/SN Microchip Technology Используется в: Chemical and Environmental Sensor Interface
What is the MCP3426A7-E/SN?
The MCP3426A7-E/SN is a Microchip Technology 16-bit, dual-channel delta-sigma ADC that performs 15 conversions per second and communicates through an I2C interface. It provides differential inputs, an integrated 2.048 V reference, and an 8-pin SOIC package. According to the Microchip manufacturer product page, the MCP3426 family is intended for low-noise, high-accuracy measurement of slowly varying analog signals.
What is the operating voltage of MCP3426A7-E/SN?
The MCP3426A7-E/SN operates from 2.7 V to 5.5 V. This range allows use with both 3.3 V and 5 V systems. According to the Microchip MCP3426/7/8 manufacturer datasheet, the analog and digital supply arrangement must remain within the stated limits during operation. Request a Quote on this page for current availability and lead-time information.
How fast does the MCP3426A7-E/SN convert analog signals?
The MCP3426A7-E/SN converts at 15 samples per second. This rate is appropriate for temperature, pressure, load-cell, chemical, and other slowly changing sensor signals rather than high-frequency waveform acquisition. According to the Microchip MCP3426 product page, the device uses a delta-sigma architecture and can provide up to 16 bits of resolution.
Does MCP3426A7-E/SN support differential measurements?
Yes, the MCP3426A7-E/SN supports two differential analog input channels. With its onboard 2.048 V reference, the device supports a differential input range of ±2.048 V. Differential measurement helps separate the desired sensor voltage from common-mode voltage and can improve rejection of noise shared equally by both input nodes.
Where can I download the MCP3426A7-E/SN datasheet PDF?
The official MCP3426A7-E/SN datasheet PDF is available from the Microchip MCP3426/7/8 Data Sheet link on this page. The document covers the MCP3426, MCP3427, and MCP3428 family, including electrical characteristics, operating limits, conversion behavior, and pin assignments. Use the manufacturer datasheet as the controlling document for design calculations.
Where can I find the MCP3426A7-E/SN pinout?
The MCP3426A7-E/SN pinout is defined by the 8-pin SOIC diagram in the Microchip MCP3426/7/8 manufacturer datasheet. The package uses eight terminals for supply, ground, reference, analog inputs, and digital interface functions. When laying out a PCB, use the pin-description table in the datasheet to verify every track and exposed land.
MCP3426A7-E/SN vs MCP3426A7T-E/SN - which is better?
The MCP3426A7-E/SN and MCP3426A7T-E/SN belong to the same 16-bit, dual-channel, 15-sps MCP3426 family, but their ordering options must be checked before interchange. The MCP3426A7-E/SN is specified in an 8-pin SOIC package. Use the manufacturer ordering-information table to confirm that the selected temperature grade, package, and qualification requirements exactly match the original assembly.
When should I choose MCP3426A7-E/SN over a lower-speed MCP3426 variant?
Choose MCP3426A7-E/SN when the measured signal changes quickly enough to require the A7 grade's 15 samples/s conversion rate while the application can still use a delta-sigma ADC. A lower-speed MCP3426 variant may be preferable for very slow sensors when lower power use or a longer conversion interval is more important. Confirm the required update latency and conversion mode in the manufacturer datasheet.
What is the best drop-in replacement for MCP3426A7-E/SN?
The closest same-footprint replacement is another MCP3426A-series 8-pin SOIC variant with the same pin arrangement and a conversion rate within 30% of 15 samples/s. MCP3426A6-E/SN is the nearest lower-rate option, while faster or slower A-series versions may require a different speed qualification. Verify supply voltage, reference configuration, and I2C addressing before replacing the original device.
Can MCP3426A6-E/SN replace MCP3426A7-E/SN?
The MCP3426A6-E/SN can be considered a same-package, same-family replacement when its lower conversion rate satisfies the measurement bandwidth. The target MCP3426A7-E/SN performs 15 samples/s, so the A6 option offers a small throughput reduction rather than a change in pin count or interface architecture. Confirm exact timing, accuracy, and acquisition behavior in the manufacturer datasheet.
Where to buy MCP3426A7-E/SN online?
Use the Request a Quote form on this page to request MCP3426A7-E/SN pricing, stock confirmation, and lead time for the exact 8-pin SOIC ordering code. The form identifies the required MCP3426A7-E/SN configuration and helps procurement avoid mismatched package or grade variants. Current commercial terms should be confirmed when the quote is returned.
What is the price of MCP3426A7-E/SN?
Pricing for MCP3426A7-E/SN depends on order quantity, packaging, and current market availability. Request a Quote on this page to obtain the applicable unit price and quantity breaks for the exact MCP3426A7-E/SN ordering code. The request identifies the device by its full manufacturer part number and 8-pin SOIC configuration.
Is MCP3426A7-E/SN in stock and what is its lead time?
Current stock and lead time for MCP3426A7-E/SN should be confirmed through the Request a Quote form on this page. The form is linked to the exact MCP3426A7-E/SN ordering code, allowing procurement to obtain an accurate availability response. Production planning should also account for the standard industrial or automotive sourcing cycle.
Is MCP3426A7-E/SN suitable for industrial sensor measurement?
The MCP3426A7-E/SN is suitable for industrial sensor measurement when the signal bandwidth fits its 15 samples/s conversion rate. Its 16-bit resolution, differential inputs, and integrated 2.048 V reference support precise measurements from strain, pressure, temperature, and chemical sensors. The -55 °C to +125 °C operating range also supports harsh industrial environments.
What are the key specifications of MCP3426A7-E/SN that engineers should know?
The MCP3426A7-E/SN combines up to 16-bit resolution, two differential input channels, a 15 samples/s conversion rate, and a 2.048 V internal reference in an 8-pin SOIC. Its 2.7 V to 5.5 V supply range accommodates common 3.3 V and 5 V rails, while its -55 °C to +125 °C rating supports demanding applications. These characteristics make it suitable for precision, low-bandwidth sensing.
What can replace MCP3426A7-E/SN?
MCP3426A6-E/SN is a practical same-family, 8-pin SOIC replacement candidate because it retains the MCP3426 architecture while reducing the A7 grade's 15 samples/s throughput. A true drop-in replacement must match the SOIC footprint, pin functions, supply range, differential-input arrangement, and required conversion timing. Validate the replacement against the original datasheet before production use.
Is MCP3426A7-E/SN the same as an MCP3426 ADC?
The MCP3426A7-E/SN is a specific ordering configuration within the broader MCP3426 family. It is a 16-bit, dual-channel delta-sigma ADC with 15 samples/s conversion speed in an 8-pin SOIC package. Other MCP3426 order codes can differ in speed grade, package, temperature grade, or qualification, so the complete suffix must be checked before substitution.

Справочные инженерные данные для MCP3426A7-E/SN — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MCP3426A7-E/SN when the application needs up to 16-bit resolution, two differential inputs, an integrated 2.048 V reference, and a 15 samples/s acquisition rate in an 8-pin SOIC. It is a strong fit for industrial sensors, bridge measurements, battery monitoring, and slow process-control loops. MCP3426A6-E/SN is the closest alternative when a modest reduction to approximately 13.75 samples/s is acceptable. MCP3426A5-E/SN suits applications requiring somewhat less frequent updates, while MCP3426A3-E/SN and slower A2 or A1 grades are appropriate only when very slow measurements dominate the design. All listed alternatives preserve the MCP3426 family architecture and SOIC footprint, but the conversion-rate change affects update latency, digital-filter behavior, and suitability for transient signals. Confirm exact timing and acquisition requirements against the manufacturer datasheet before substitution.

Сравнение с аналогами

Параметр Этот товар MCP3426A6-E/SN MCP3426A5-E/SN MCP3426A3-E/SN MCP3426A2-E/SN MCP3426A1-E/SN
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
ADC Resolution Up to 16 bits Up to 16 bits Up to 16 bits Up to 16 bits Up to 16 bits Up to 16 bits
Conversion Rate 15 samples/s Approximately 13.75 samples/s Approximately 12.5 samples/s Approximately 5 samples/s Approximately 3.75 samples/s Approximately 1.25 samples/s
Input Channels 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Operating Temperature Range -55 °C to +125 °C -55 °C to +125 °C -55 °C to +125 °C -55 °C to +125 °C -55 °C to +125 °C -55 °C to +125 °C
Digital Interface I2C I2C I2C I2C I2C I2C

Ключевые отличия

  • Higher conversion throughput within the same MCP3426 family (против MCP3426A6-E/SN)
  • Balance of throughput and sensitivity for slowly varying measurements (против MCP3426A1-E/SN)
  • Differential precision measurement with integrated reference (против MCP3426A3-E/SN)

Заметки по проектированию

Route VIN+ and VIN- as a compact, closely coupled differential pair to minimize susceptibility to electromagnetic interference and ground-current coupling. Place input filtering components close to their associated pins, and keep the analog section physically separated from switching-regulator traces, relay outputs, and high-current return paths. Maintain a continuous analog ground reference beneath the converter and follow the manufacturer datasheet layout guidance.

Treat the two analog inputs as a precision measurement interface. Use a low-leakage protection network, avoid excessive resistance around sensitive sensor nodes, and confirm that the front-end output settles within the acquisition time of the selected conversion mode. The delta-sigma digital filter provides averaging for low-frequency signals but does not remove aliasing before conversion, so anti-alias filtering remains necessary when frequency content exceeds the usable measurement bandwidth.

Place the supply bypass capacitor immediately across VDD and VSS near the device, and provide a quiet analog supply path. The MCP3426A7-E/SN accepts a 2.7 V to 5.5 V operating range, but measured accuracy and noise can still be affected by supply ripple and shared return impedance. Do not route return current from the analog input shield or sensor excitation directly through the converter's sensitive ground node.

Do not treat the A7 speed grade as interchangeable with every MCP3426 ordering code without checking conversion timing and acquisition behavior. Likewise, do not substitute a 2x3 mm DFN variant on an 8-pin SOIC footprint. Confirm the complete suffix, package dimensions, pin functions, reference configuration, I2C address behavior, and required conversion mode before approving a replacement or second-source order.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The -55 °C to +125 °C operating-temperature specification does not by itself establish AEC-Q100 qualification. Compliance declarations must be confirmed for the exact order code.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MCP3426A7-E/SN datasheet MCP3426A7-E/SN pinout MCP3426A7 datasheet pdf MCP3426A7-E/SN equivalent MCP3426A7-E/SN replacement MCP3426A7 vs MCP3426A6 MCP3426A7-E/SN price MCP3426A7-E/SN stock Microchip MCP3426A7-E/SN MCP3426A7 16-bit dual channel ADC MCP3426A7-E/SN SOIC footprint MCP3426A7 application circuit

Связанные компоненты & термины

Microchip Technology MCP3426A7-E/SN MCP3426A6-E/SN MCP3426A5-E/SN MCP3426A3-E/SN MCP3426A2-E/SN MCP3426A1-E/SN analog-to-digital converter ADC delta-sigma ADC sigma-delta modulator data converter analog integrated circuit mixed-signal integrated circuit semiconductor differential input 16-bit resolution 15 samples per second 2.048 V reference I2C 8-pin SOIC SOIC package family surface-mount package industrial sensor measurement bridge sensor battery monitoring
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ