MSP430F6725IPZ - 25MHz Metering MCU | Texas Instruments
Артикул: MSP430F6725IPZ ✓ АктивенMSP430F6725IPZ Обзор
A mixed-signal microcontroller is an integrated circuit that combines a digital processor with analog measurement and interface functions. Within the product hierarchy, the MSP430F6725 belongs to the MSP430 mixed-signal MCU family and is purpose-built for metering systems. Its Sigma-Delta ADC channels, LCD support, and RTC reduce the external component count required for energy-measurement instruments, while the MSP430 architecture provides deterministic low-power operation.
Principal device characteristics include 25 MHz maximum clock operation, 128 KB of programmable Flash, 4 KB of RAM, and two 24-bit Sigma-Delta ADCs with integrated analog-to-digital converters for high-resolution measurement. The LCD interface supports segmented display products, while the real-time clock provides timekeeping for energy meters, industrial counters, and low-duty-cycle sensing nodes. A 100-pin LQFP package provides the analog, display, communications, and general-purpose signal connections required by multi-function metering designs.
The MSP430 CPUXV2 uses a 16-bit RISC architecture with 16-bit registers and constant generators. Its mixed-signal architecture places precision analog conversion close to the digital control logic, supporting measurement systems that must acquire low-frequency analog signals while maintaining predictable response and power consumption. The five low-power operating modes associated with the MSP430 platform help balance measurement duty cycle against standby current in battery-assisted or energy-limited instruments.
Typical uses include single-phase electricity meters, utility load-monitoring terminals, industrial energy meters, solar and power-distribution monitoring equipment, and LCD-based sensor nodes. The integrated LCD interface is particularly useful in compact instruments that display consumption values locally, while the two ADC channels support current-voltage signal acquisition when paired with suitable external sensing and conditioning networks.
PCB design should treat analog inputs, digital interfaces, and LCD outputs as separate functional groups, while keeping the MCU supply decoupling and reference connections close to their associated pins. Because the LQFP package provides a large number of external connections, use the manufacturer pin-description table when assigning nets. Firmware must also account for the ADC settling, calibration, and gain-correction requirements of precision metering systems.
This page consolidates the manufacturer device description, distributor availability information, package details, and family cross-references into one engineering reference. It also organizes practical design considerations, specification comparisons, and qualified same-footprint alternatives so engineers can evaluate the MSP430F6725IPZ before committing a PCB layout or production BOM.
Аналоги без доработки для MSP430F6725IPZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MSP430F6725IPZ (тот же форм-фактор и посадочное место) — отличается по Display Support, Product Type, RAM, Real-Time Clock.
MSP430F6725AIPZR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MSP430F6726IPZR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MSP430F6723IPZ
✅ Прямая заменаУточнить цену
Открыть даташит →MSP430F6721IPZR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MSP430F6724IPZR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MSP430F6725IPZ Максимальные параметры и электрические характеристики
| Product Type | Mixed-Signal Microcontroller / Single-Phase Metering SoC |
| CPU Architecture | 16-bit MSP430 RISC |
| CPU Core | MSP430 CPUXV2 |
| Максимальная тактовая частота | 25 MHz |
| Flash Memory | 128 KB |
| RAM | 4 KB |
| ADC Type | Sigma-Delta |
| ADC Channel Count | 2 channels |
| Display Support | LCD interface |
| Real-Time Clock | Integrated RTC |
| Package Type | LQFP (PZ), 100 pins |
| Package Body Size | 14 mm x 14 mm |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Тип монтажа | Surface mount |
| Low-Power Operating Modes | 5 modes |
Руководство по цоколевке MSP430F6725IPZ в корпусе square
Цоколевка для MSP430F6725IPZ (корпус square). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MSP430F6725IPZ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MSP430F6725IPZ подходит для 6 применениеs: Single-Phase Smart Electricity Meters, Industrial Energy-Monitoring Terminals, LCD Utility Metering Displays, Solar and Power-Distribution Monitoring, Low-Power Environmental Sensor Nodes, Precision Analog Control Platforms.
Single-Phase Smart Electricity Meters
The MSP430F6725IPZ fits single-phase smart meters because its two Sigma-Delta ADC channels can acquire current and voltage information while the 16-bit MSP430 CPUXV2 core handles metering calculations at up to 25 MHz. Its 128 KB of Flash provides space for algorithms, calibration tables, and communication firmware, while 4 KB of RAM supports working buffers. The integrated real-time clock supports time-of-use records and event logging. Use the LCD interface for local consumption display and retain external circuitry for signal conditioning, isolation, and safety-rated interface requirements.
Рекомендуется
Industrial Energy-Monitoring Terminals
The MSP430F6725IPZ is appropriate for industrial energy terminals that combine low-frequency analog measurement with local display and control functions. Its 25 MHz CPU provides deterministic execution for measurement sampling, filtering, and data preparation, while the MSP430 low-power architecture supports duty-cycled operation. The two Sigma-Delta ADCs support measurement channels with suitable external scaling and filtering, and the 100-pin LQFP provides access to LCD, communications, and control signals. Firmware can implement calibration, energy accumulation, event detection, and local diagnostics without relying on a separate display controller.
Рекомендуется
LCD Utility Metering Displays
The MSP430F6725IPZ can consolidate a metrology measurement engine and segmented LCD user interface in one component. Its integrated LCD interface reduces the need for a separate display driver, while the two Sigma-Delta ADCs support acquisition of current and voltage signals. The 128 KB Flash and 4 KB RAM are sufficient for display formatting, measurement tables, calibration coefficients, and user-interface state. In this design, refresh only when required to conserve power and avoid unnecessary LCD switching activity. Verify LCD segment mapping, drive-voltage requirements, and contrast timing against the device documentation.
Рекомендуется
Solar and Power-Distribution Monitoring
The MSP430F6725IPZ supports solar inverter, power-distribution, and energy-management monitors that must combine analog acquisition with embedded control. The 16-bit RISC core runs at up to 25 MHz, providing adequate throughput for filtering, calibration, and protocol handling. Two Sigma-Delta ADC channels can be used for synchronized or complementary measurements when paired with suitable external front ends. The integrated real-time clock allows timestamped operating records, while the 128 KB Flash accommodates application code and parameters. Low-power operating modes are valuable in remote installations where continuous radio activity is limited.
Рекомендуется
Low-Power Environmental Sensor Nodes
The MSP430F6725IPZ can serve as the control and measurement engine in low-duty-cycle industrial sensor nodes. Its mixed-signal architecture places two Sigma-Delta ADCs beside the 16-bit MSP430 CPU, allowing slow but high-resolution analog measurements without excessive external signal-chain complexity. The real-time clock supports scheduled sampling and time-stamped records, while 4 KB of RAM accommodates short measurement windows and communication buffers. Use the low-power modes between measurements and keep LCD updates disabled when no local display is required to reduce average energy use and preserve battery capacity.
Рекомендуется
Precision Analog Control Platforms
The MSP430F6725IPZ is suitable for compact control platforms that require deterministic ADC sampling, real-time calculation, and local human-machine feedback. Its 25 MHz 16-bit CPU can execute proportional-integral-derivative control loops, threshold logic, and sensor compensation, while the two Sigma-Delta channels provide measurement inputs. The 128 KB Flash supports firmware revisions and field data, and the LCD interface can communicate operating state. Because Sigma-Delta conversion timing and digital filtering affect control response, validate the complete acquisition and computation latency in the selected operating mode before closing the control loop.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MSP430F6725IPZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MSP430F6725AIPZR | MSP430F6726IPZR | MSP430F6723IPZ | MSP430F6721IPZR | MSP430F6724IPZR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm |
| CPU Architecture | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC |
Ключевые отличия
- Purpose-built metering integration (против MSP430F6721IPZR)
- Direct family configuration match (против MSP430F6725AIPZR)
- High-resolution mixed-signal conversion (против MSP430F6726IPZR)
Заметки по проектированию
Route the analog inputs and their reference networks as a compact, isolated group, and place the required bypass capacitors close to the associated device pins. The 100-pin LQFP has a 0.5 mm pitch, so use a stable land pattern, adequate solder-mask clearance, and inspection points on dense signal rows. Confirm every net against the manufacturer pin-description table before releasing artwork.
Sigma-Delta measurements can be sensitive to external noise, grounding, and digital activity near the analog pins. Keep switching or high-current routing away from measurement inputs, use a quiet analog ground strategy, and follow the application guidance in the manufacturer datasheet. Validate gain error, offset, and noise with the production analog network rather than relying only on simulation.
Design the supply network so the MCU receives clean voltage during LCD updates, ADC conversion, and communications activity. Place bulk and high-frequency decoupling according to the manufacturer recommendations and route supply and ground pins with low loop area. Because the exact operating voltage range was not confirmed for this ordering option, verify the electrical characteristics before selecting components for the supply rail.
Информация о соответствии
The industrial temperature grade and package characteristics are identified in the manufacturer and distributor product information. No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were confirmed for this ordering option.