MSP430F6725IPZ - 25MHz Metering MCU | Texas Instruments
MPN: MSP430F6725IPZ ✓ 啟用中MSP430F6725IPZ 概覽
A mixed-signal microcontroller is an integrated circuit that combines a digital processor with analog measurement and interface functions. Within the product hierarchy, the MSP430F6725 belongs to the MSP430 mixed-signal MCU family and is purpose-built for metering systems. Its Sigma-Delta ADC channels, LCD support, and RTC reduce the external component count required for energy-measurement instruments, while the MSP430 architecture provides deterministic low-power operation.
Principal device characteristics include 25 MHz maximum clock operation, 128 KB of programmable Flash, 4 KB of RAM, and two 24-bit Sigma-Delta ADCs with integrated analog-to-digital converters for high-resolution measurement. The LCD interface supports segmented display products, while the real-time clock provides timekeeping for energy meters, industrial counters, and low-duty-cycle sensing nodes. A 100-pin LQFP package provides the analog, display, communications, and general-purpose signal connections required by multi-function metering designs.
The MSP430 CPUXV2 uses a 16-bit RISC architecture with 16-bit registers and constant generators. Its mixed-signal architecture places precision analog conversion close to the digital control logic, supporting measurement systems that must acquire low-frequency analog signals while maintaining predictable response and power consumption. The five low-power operating modes associated with the MSP430 platform help balance measurement duty cycle against standby current in battery-assisted or energy-limited instruments.
Typical uses include single-phase electricity meters, utility load-monitoring terminals, industrial energy meters, solar and power-distribution monitoring equipment, and LCD-based sensor nodes. The integrated LCD interface is particularly useful in compact instruments that display consumption values locally, while the two ADC channels support current-voltage signal acquisition when paired with suitable external sensing and conditioning networks.
PCB design should treat analog inputs, digital interfaces, and LCD outputs as separate functional groups, while keeping the MCU supply decoupling and reference connections close to their associated pins. Because the LQFP package provides a large number of external connections, use the manufacturer pin-description table when assigning nets. Firmware must also account for the ADC settling, calibration, and gain-correction requirements of precision metering systems.
This page consolidates the manufacturer device description, distributor availability information, package details, and family cross-references into one engineering reference. It also organizes practical design considerations, specification comparisons, and qualified same-footprint alternatives so engineers can evaluate the MSP430F6725IPZ before committing a PCB layout or production BOM.
直接替換替代品,適用於 MSP430F6725IPZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MSP430F6725IPZ (相同外形與佔位) — 差異在於 Display Support, Product Type, RAM, Real-Time Clock.
MSP430F6725AIPZR
✅ 直接替換📋 參考替代品(不在目錄中)
MSP430F6726IPZR
✅ 直接替換📋 參考替代品(不在目錄中)
MSP430F6723IPZ
✅ 直接替換聯絡詢價
查看資料表 →MSP430F6721IPZR
✅ 直接替換📋 參考替代品(不在目錄中)
MSP430F6724IPZR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MSP430F6725IPZ 最大額定值與電氣特性
| Product Type | Mixed-Signal Microcontroller / Single-Phase Metering SoC |
| CPU Architecture | 16-bit MSP430 RISC |
| CPU Core | MSP430 CPUXV2 |
| 最大時脈頻率 | 25 MHz |
| Flash Memory | 128 KB |
| RAM | 4 KB |
| ADC Type | Sigma-Delta |
| ADC Channel Count | 2 channels |
| Display Support | LCD interface |
| Real-Time Clock | Integrated RTC |
| Package Type | LQFP (PZ), 100 pins |
| Package Body Size | 14 mm x 14 mm |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| 安裝類型 | Surface mount |
| Low-Power Operating Modes | 5 modes |
MSP430F6725IPZ square 腳位配置指南
MSP430F6725IPZ(square 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MSP430F6725IPZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
MSP430F6725IPZ 適用於 6 應用s: Single-Phase Smart Electricity Meters, Industrial Energy-Monitoring Terminals, LCD Utility Metering Displays, Solar and Power-Distribution Monitoring, Low-Power Environmental Sensor Nodes, Precision Analog Control Platforms.
Single-Phase Smart Electricity Meters
The MSP430F6725IPZ fits single-phase smart meters because its two Sigma-Delta ADC channels can acquire current and voltage information while the 16-bit MSP430 CPUXV2 core handles metering calculations at up to 25 MHz. Its 128 KB of Flash provides space for algorithms, calibration tables, and communication firmware, while 4 KB of RAM supports working buffers. The integrated real-time clock supports time-of-use records and event logging. Use the LCD interface for local consumption display and retain external circuitry for signal conditioning, isolation, and safety-rated interface requirements.
推薦
Industrial Energy-Monitoring Terminals
The MSP430F6725IPZ is appropriate for industrial energy terminals that combine low-frequency analog measurement with local display and control functions. Its 25 MHz CPU provides deterministic execution for measurement sampling, filtering, and data preparation, while the MSP430 low-power architecture supports duty-cycled operation. The two Sigma-Delta ADCs support measurement channels with suitable external scaling and filtering, and the 100-pin LQFP provides access to LCD, communications, and control signals. Firmware can implement calibration, energy accumulation, event detection, and local diagnostics without relying on a separate display controller.
推薦
LCD Utility Metering Displays
The MSP430F6725IPZ can consolidate a metrology measurement engine and segmented LCD user interface in one component. Its integrated LCD interface reduces the need for a separate display driver, while the two Sigma-Delta ADCs support acquisition of current and voltage signals. The 128 KB Flash and 4 KB RAM are sufficient for display formatting, measurement tables, calibration coefficients, and user-interface state. In this design, refresh only when required to conserve power and avoid unnecessary LCD switching activity. Verify LCD segment mapping, drive-voltage requirements, and contrast timing against the device documentation.
推薦
Solar and Power-Distribution Monitoring
The MSP430F6725IPZ supports solar inverter, power-distribution, and energy-management monitors that must combine analog acquisition with embedded control. The 16-bit RISC core runs at up to 25 MHz, providing adequate throughput for filtering, calibration, and protocol handling. Two Sigma-Delta ADC channels can be used for synchronized or complementary measurements when paired with suitable external front ends. The integrated real-time clock allows timestamped operating records, while the 128 KB Flash accommodates application code and parameters. Low-power operating modes are valuable in remote installations where continuous radio activity is limited.
推薦
Low-Power Environmental Sensor Nodes
The MSP430F6725IPZ can serve as the control and measurement engine in low-duty-cycle industrial sensor nodes. Its mixed-signal architecture places two Sigma-Delta ADCs beside the 16-bit MSP430 CPU, allowing slow but high-resolution analog measurements without excessive external signal-chain complexity. The real-time clock supports scheduled sampling and time-stamped records, while 4 KB of RAM accommodates short measurement windows and communication buffers. Use the low-power modes between measurements and keep LCD updates disabled when no local display is required to reduce average energy use and preserve battery capacity.
推薦
Precision Analog Control Platforms
The MSP430F6725IPZ is suitable for compact control platforms that require deterministic ADC sampling, real-time calculation, and local human-machine feedback. Its 25 MHz 16-bit CPU can execute proportional-integral-derivative control loops, threshold logic, and sensor compensation, while the two Sigma-Delta channels provide measurement inputs. The 128 KB Flash supports firmware revisions and field data, and the LCD interface can communicate operating state. Because Sigma-Delta conversion timing and digital filtering affect control response, validate the complete acquisition and computation latency in the selected operating mode before closing the control loop.
推薦
推薦產品摘要
工程參考資料,適用於 MSP430F6725IPZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MSP430F6725AIPZR | MSP430F6726IPZR | MSP430F6723IPZ | MSP430F6721IPZR | MSP430F6724IPZR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm |
| CPU Architecture | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC |
主要差異化特點
- Purpose-built metering integration (對比MSP430F6721IPZR)
- Direct family configuration match (對比MSP430F6725AIPZR)
- High-resolution mixed-signal conversion (對比MSP430F6726IPZR)
設計說明
Route the analog inputs and their reference networks as a compact, isolated group, and place the required bypass capacitors close to the associated device pins. The 100-pin LQFP has a 0.5 mm pitch, so use a stable land pattern, adequate solder-mask clearance, and inspection points on dense signal rows. Confirm every net against the manufacturer pin-description table before releasing artwork.
Sigma-Delta measurements can be sensitive to external noise, grounding, and digital activity near the analog pins. Keep switching or high-current routing away from measurement inputs, use a quiet analog ground strategy, and follow the application guidance in the manufacturer datasheet. Validate gain error, offset, and noise with the production analog network rather than relying only on simulation.
Design the supply network so the MCU receives clean voltage during LCD updates, ADC conversion, and communications activity. Place bulk and high-frequency decoupling according to the manufacturer recommendations and route supply and ground pins with low loop area. Because the exact operating voltage range was not confirmed for this ordering option, verify the electrical characteristics before selecting components for the supply rail.
合規資訊
The industrial temperature grade and package characteristics are identified in the manufacturer and distributor product information. No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were confirmed for this ordering option.