MSP430F6725IPZ - 25MHz Metering MCU | Texas Instruments
MPN: MSP430F6725IPZ ✓ Hoạt độngMSP430F6725IPZ Tóm tắt
A mixed-signal microcontroller is an integrated circuit that combines a digital processor with analog measurement and interface functions. Within the product hierarchy, the MSP430F6725 belongs to the MSP430 mixed-signal MCU family and is purpose-built for metering systems. Its Sigma-Delta ADC channels, LCD support, and RTC reduce the external component count required for energy-measurement instruments, while the MSP430 architecture provides deterministic low-power operation.
Principal device characteristics include 25 MHz maximum clock operation, 128 KB of programmable Flash, 4 KB of RAM, and two 24-bit Sigma-Delta ADCs with integrated analog-to-digital converters for high-resolution measurement. The LCD interface supports segmented display products, while the real-time clock provides timekeeping for energy meters, industrial counters, and low-duty-cycle sensing nodes. A 100-pin LQFP package provides the analog, display, communications, and general-purpose signal connections required by multi-function metering designs.
The MSP430 CPUXV2 uses a 16-bit RISC architecture with 16-bit registers and constant generators. Its mixed-signal architecture places precision analog conversion close to the digital control logic, supporting measurement systems that must acquire low-frequency analog signals while maintaining predictable response and power consumption. The five low-power operating modes associated with the MSP430 platform help balance measurement duty cycle against standby current in battery-assisted or energy-limited instruments.
Typical uses include single-phase electricity meters, utility load-monitoring terminals, industrial energy meters, solar and power-distribution monitoring equipment, and LCD-based sensor nodes. The integrated LCD interface is particularly useful in compact instruments that display consumption values locally, while the two ADC channels support current-voltage signal acquisition when paired with suitable external sensing and conditioning networks.
PCB design should treat analog inputs, digital interfaces, and LCD outputs as separate functional groups, while keeping the MCU supply decoupling and reference connections close to their associated pins. Because the LQFP package provides a large number of external connections, use the manufacturer pin-description table when assigning nets. Firmware must also account for the ADC settling, calibration, and gain-correction requirements of precision metering systems.
This page consolidates the manufacturer device description, distributor availability information, package details, and family cross-references into one engineering reference. It also organizes practical design considerations, specification comparisons, and qualified same-footprint alternatives so engineers can evaluate the MSP430F6725IPZ before committing a PCB layout or production BOM.
Bộ thay thế dễ dàng lắp đặt cho MSP430F6725IPZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MSP430F6725IPZ (cùng hình factor và footprint) — khác nhau ở Display Support, Product Type, RAM, Real-Time Clock.
MSP430F6725AIPZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MSP430F6726IPZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MSP430F6723IPZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MSP430F6721IPZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MSP430F6724IPZR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MSP430F6725IPZ Tỷ lệ tối đa & tính chất điện
| Product Type | Mixed-Signal Microcontroller / Single-Phase Metering SoC |
| CPU Architecture | 16-bit MSP430 RISC |
| CPU Core | MSP430 CPUXV2 |
| Tần số xung maksimum | 25 MHz |
| Flash Memory | 128 KB |
| RAM | 4 KB |
| ADC Type | Sigma-Delta |
| ADC Channel Count | 2 channels |
| Display Support | LCD interface |
| Real-Time Clock | Integrated RTC |
| Package Type | LQFP (PZ), 100 pins |
| Package Body Size | 14 mm x 14 mm |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Kiểu lắp đặt | Surface mount |
| Low-Power Operating Modes | 5 modes |
Hướng dẫn cấu hình chân MSP430F6725IPZ square
Cấu hình chân cho MSP430F6725IPZ (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MSP430F6725IPZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MSP430F6725IPZ phù hợp cho 6 Áp dụngs: Single-Phase Smart Electricity Meters, Industrial Energy-Monitoring Terminals, LCD Utility Metering Displays, Solar and Power-Distribution Monitoring, Low-Power Environmental Sensor Nodes, Precision Analog Control Platforms.
Single-Phase Smart Electricity Meters
The MSP430F6725IPZ fits single-phase smart meters because its two Sigma-Delta ADC channels can acquire current and voltage information while the 16-bit MSP430 CPUXV2 core handles metering calculations at up to 25 MHz. Its 128 KB of Flash provides space for algorithms, calibration tables, and communication firmware, while 4 KB of RAM supports working buffers. The integrated real-time clock supports time-of-use records and event logging. Use the LCD interface for local consumption display and retain external circuitry for signal conditioning, isolation, and safety-rated interface requirements.
Được đề xuất
Industrial Energy-Monitoring Terminals
The MSP430F6725IPZ is appropriate for industrial energy terminals that combine low-frequency analog measurement with local display and control functions. Its 25 MHz CPU provides deterministic execution for measurement sampling, filtering, and data preparation, while the MSP430 low-power architecture supports duty-cycled operation. The two Sigma-Delta ADCs support measurement channels with suitable external scaling and filtering, and the 100-pin LQFP provides access to LCD, communications, and control signals. Firmware can implement calibration, energy accumulation, event detection, and local diagnostics without relying on a separate display controller.
Được đề xuất
LCD Utility Metering Displays
The MSP430F6725IPZ can consolidate a metrology measurement engine and segmented LCD user interface in one component. Its integrated LCD interface reduces the need for a separate display driver, while the two Sigma-Delta ADCs support acquisition of current and voltage signals. The 128 KB Flash and 4 KB RAM are sufficient for display formatting, measurement tables, calibration coefficients, and user-interface state. In this design, refresh only when required to conserve power and avoid unnecessary LCD switching activity. Verify LCD segment mapping, drive-voltage requirements, and contrast timing against the device documentation.
Được đề xuất
Solar and Power-Distribution Monitoring
The MSP430F6725IPZ supports solar inverter, power-distribution, and energy-management monitors that must combine analog acquisition with embedded control. The 16-bit RISC core runs at up to 25 MHz, providing adequate throughput for filtering, calibration, and protocol handling. Two Sigma-Delta ADC channels can be used for synchronized or complementary measurements when paired with suitable external front ends. The integrated real-time clock allows timestamped operating records, while the 128 KB Flash accommodates application code and parameters. Low-power operating modes are valuable in remote installations where continuous radio activity is limited.
Được đề xuất
Low-Power Environmental Sensor Nodes
The MSP430F6725IPZ can serve as the control and measurement engine in low-duty-cycle industrial sensor nodes. Its mixed-signal architecture places two Sigma-Delta ADCs beside the 16-bit MSP430 CPU, allowing slow but high-resolution analog measurements without excessive external signal-chain complexity. The real-time clock supports scheduled sampling and time-stamped records, while 4 KB of RAM accommodates short measurement windows and communication buffers. Use the low-power modes between measurements and keep LCD updates disabled when no local display is required to reduce average energy use and preserve battery capacity.
Được đề xuất
Precision Analog Control Platforms
The MSP430F6725IPZ is suitable for compact control platforms that require deterministic ADC sampling, real-time calculation, and local human-machine feedback. Its 25 MHz 16-bit CPU can execute proportional-integral-derivative control loops, threshold logic, and sensor compensation, while the two Sigma-Delta channels provide measurement inputs. The 128 KB Flash supports firmware revisions and field data, and the LCD interface can communicate operating state. Because Sigma-Delta conversion timing and digital filtering affect control response, validate the complete acquisition and computation latency in the selected operating mode before closing the control loop.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MSP430F6725IPZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MSP430F6725AIPZR | MSP430F6726IPZR | MSP430F6723IPZ | MSP430F6721IPZR | MSP430F6724IPZR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm | LQFP-100 (PZ), 14 mm x 14 mm |
| CPU Architecture | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC |
Bảo phân biệt quan trọng
- Purpose-built metering integration (vsMSP430F6721IPZR)
- Direct family configuration match (vsMSP430F6725AIPZR)
- High-resolution mixed-signal conversion (vsMSP430F6726IPZR)
Ghi chú thiết kế
Route the analog inputs and their reference networks as a compact, isolated group, and place the required bypass capacitors close to the associated device pins. The 100-pin LQFP has a 0.5 mm pitch, so use a stable land pattern, adequate solder-mask clearance, and inspection points on dense signal rows. Confirm every net against the manufacturer pin-description table before releasing artwork.
Sigma-Delta measurements can be sensitive to external noise, grounding, and digital activity near the analog pins. Keep switching or high-current routing away from measurement inputs, use a quiet analog ground strategy, and follow the application guidance in the manufacturer datasheet. Validate gain error, offset, and noise with the production analog network rather than relying only on simulation.
Design the supply network so the MCU receives clean voltage during LCD updates, ADC conversion, and communications activity. Place bulk and high-frequency decoupling according to the manufacturer recommendations and route supply and ground pins with low loop area. Because the exact operating voltage range was not confirmed for this ordering option, verify the electrical characteristics before selecting components for the supply rail.
Thông tin tuân thủ
The industrial temperature grade and package characteristics are identified in the manufacturer and distributor product information. No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were confirmed for this ordering option.