MT48LC16M16A2BG-75 IT:D - 256Mbit SDRAM 133MHz | Micron
Артикул: MT48LC16M16A2BG-75 IT:D ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.05 | $7,05 |
| 10 | $6.4 | $64,00 |
| 100 | $5.65 | $565,00 |
| 500 | $4.95 | $2.475,00 |
| 1.000 | $4.3 | $4.300,00 |
MT48LC16M16A2BG-75 IT:D Обзор
An SDRAM (Synchronous Dynamic Random-Access Memory) is a type of volatile DRAM that synchronizes all operations to a system clock, enabling pipelined command execution and higher throughput than asynchronous DRAM. SDRAM sits within the memory IC hierarchy: SDRAM -> DRAM -> volatile memory -> memory IC -> semiconductor. The MT48LC16M16A2 is a member of Micron's legacy 256Mb SDRAM family (16Mx16, 32Mx8, and 64Mx4 configurations) introduced in the late 1990s and now classified as obsolete by Micron.
Key features include a 133 MHz synchronous interface with all address and control signals registered on the positive clock edge, internal pipelined architecture that allows column-address changes every clock cycle, programmable CAS latency (2 or 3), burst read/write modes, and auto-refresh plus self-refresh support. The 54-VFBGA package provides a compact footprint suitable for space-constrained embedded designs, while the parallel 16-bit data bus delivers up to 266 MB/s peak bandwidth.
Typical applications include legacy networking equipment, industrial control systems, point-of-sale terminals, telecommunications infrastructure, and embedded computing platforms that require reliable, high-bandwidth main memory. Designers should consult the Micron SDRAM datasheet for refresh scheduling, mode-register configuration, and PC133 timing parameters. For new designs, Micron recommends migrating to DDR/DDR2/DDR3 or newer DRAM families, as this part is in Micron's obsolete product catalog with limited long-term availability.
Аналоги без доработки для MT48LC16M16A2BG-75 IT:D — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MT48LC16M16A2BG-75:D
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MT48LC16M16A2BG-75 IT:D TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MT48LC16M16A2B4-6A IT:G TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MT48LC16M16A2BG-75 AT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
K4S641632D
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
H57V2562GTR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MT48LC16M16A2BG-75 IT:D Максимальные параметры и электрические характеристики
| Тип памяти | SDRAM (Synchronous DRAM) |
| Размер памяти | 256 Mbit |
| Организация памяти | 16M x 16 |
| Максимальная тактовая частота | 133 MHz |
| Access Time | 5.4 ns |
| Speed Grade | -75 (7.5 ns) |
| Интерфейс | Parallel |
| Разрядность шины данных | 16 bit |
| Напряжение питания | 3.0 V to 3.6 V (3.3 V nominal) |
| Рабочая температура | -40C to +85C (Industrial, IT grade) |
| Корпус | 54-VFBGA (8x14) |
| Тип монтажа | Surface Mount |
| Задержка CAS | Programmable, 2 or 3 |
| Refresh | Auto-refresh and self-refresh |
| Compliance | PC100- and PC133-compliant |
| Die Revision | :D |
Конфигурация выводов MT48LC16M16A2BG-75 IT:D
| Контакт A1 | DQ0 — Data I/O line 0 |
| Контакт A2 | DQ1 — Data I/O line 1 |
| Контакт A3 | DQ2 — Data I/O line 2 |
| Контакт A4 | DQ3 — Data I/O line 3 |
| Контакт A5 | DQ4 — Data I/O line 4 |
| Контакт A6 | DQ5 — Data I/O line 5 |
| Контакт A7 | DQ6 — Data I/O line 6 |
| Контакт A8 | DQ7 — Data I/O line 7 |
| Контакт B1 | VSS — Ground |
| Контакт B2 | VDDQ — DQ power supply (3.3V) |
| Контакт B3 | DQ8 — Data I/O line 8 |
| Контакт B4 | DQ9 — Data I/O line 9 |
| Контакт B5 | DQ10 — Data I/O line 10 |
| Контакт B6 | DQ11 — Data I/O line 11 |
| Контакт B7 | DQ12 — Data I/O line 12 |
| Контакт B8 | DQ13 — Data I/O line 13 |
| Контакт C1 | VDD — Core power supply (3.3V) |
| Контакт C2 | DQ14 — Data I/O line 14 |
| Контакт C3 | DQ15 — Data I/O line 15 |
| Контакт C4 | VSSQ — DQ ground |
| Контакт C5 | NC — Not connected (per datasheet) |
| Контакт C6 | NC — Not connected (per datasheet) |
| Контакт C7 | A0 — Address input 0 |
| Контакт C8 | A1 — Address input 1 |
| Контакт D1 | A2 — Address input 2 |
| Контакт D2 | A3 — Address input 3 |
| Контакт D3 | A4 — Address input 4 |
| Контакт D4 | A5 — Address input 5 |
| Контакт D5 | A6 — Address input 6 |
| Контакт D6 | A7 — Address input 7 |
| Контакт D7 | A8 — Address input 8 |
| Контакт D8 | A9 — Address input 9 |
| Контакт E1 | A10 — Address input 10 |
| Контакт E2 | A11 — Address input 11 |
| Контакт E3 | A12 — Address input 12 |
| Контакт E4 | BA0 — Bank address 0 |
| Контакт E5 | BA1 — Bank address 1 |
| Контакт E6 | RAS# — Row address strobe (active low) |
| Контакт E7 | CAS# — Column address strobe (active low) |
| Контакт E8 | WE# — Write enable (active low) |
| Контакт F1 | CS# — Chip select (active low) |
| Контакт F2 | CKE — Clock enable |
| Контакт F3 | CLK — System clock input |
| Контакт F4 | DQM — Data mask |
| Контакт F5 | NC — Not connected (per datasheet) |
| Контакт F6 | NC — Not connected (per datasheet) |
| Контакт F7 | VSS — Ground |
| Контакт F8 | VDD — Core power supply (3.3V) |
| Контакт G1 | VDDQ — DQ power supply (3.3V) |
| Контакт G2 | VSSQ — DQ ground |
| Контакт G3 | NC — Not connected (per datasheet) |
| Контакт G4 | NC — Not connected (per datasheet) |
| Контакт G5 | NC — Not connected (per datasheet) |
| Контакт G6 | NC — Not connected (per datasheet) |
| Контакт G7 | NC — Not connected (per datasheet) |
| Контакт G8 | NC — Not connected (per datasheet) |
Типичное применение
MT48LC16M16A2BG-75 IT:D подходит для 6 применениеs: Legacy Networking Equipment, Industrial Control Systems, Point-of-Sale Terminals, Telecommunications Infrastructure, Embedded Computing Platforms, Medical Instrumentation.
Legacy Networking Equipment
The MT48LC16M16A2BG-75 IT:D is well-suited for legacy networking routers, switches, and base-station controllers that require 256 Mbit of main memory with PC133 timing. The 133 MHz synchronous interface delivers up to 266 MB/s bandwidth, sufficient for packet buffering, routing table storage, and control-plane processing in older telecom infrastructure. Its 54-VFBGA package enables dense PCB layouts in compact chassis, while the industrial temperature range (-40C to +85C) ensures reliable operation in outdoor-cabinet and uncontrolled-ventilation environments. The parallel 16-bit data bus simplifies integration with legacy network processors and PowerPC/ARM controllers that lack DDR memory controllers.
Рекомендуется
Industrial Control Systems
In PLCs, SCADA systems, and factory automation controllers, the MT48LC16M16A2BG-75 IT:D provides reliable working memory for real-time operating systems and data acquisition. The -40C to +85C industrial temperature grade handles factory-floor thermal extremes, while the PC133 compliance guarantees deterministic read/write timing for deterministic control loops. Its pipelined SDRAM architecture minimizes latency for high-speed sensor polling and motion-control trajectory calculations. The 16Mx16 organization allows direct connection to 16-bit microcontrollers and DSPs without bus-width conversion logic.
Рекомендуется
Point-of-Sale Terminals
The MT48LC16M16A2BG-75 IT:D serves as main memory in legacy POS terminals, electronic cash registers, and payment-processing devices where its 256 Mbit capacity supports transaction buffering, receipt printing buffers, and small display framebuffers. The compact 54-VFBGA package suits the slim mechanical envelopes typical of countertop POS hardware, while the industrial temperature grade handles the warm retail environment near ovens and refrigeration units. SDRAM's synchronous design eliminates the wait-state complexity that asynchronous DRAM introduced, simplifying firmware development for embedded POS processors.
Рекомендуется
Telecommunications Infrastructure
In legacy PBX systems, VoIP gateways, and base-station controllers, the MT48LC16M16A2BG-75 IT:D provides the working memory for call-processing firmware, voice codec buffers, and signaling-stack data structures. The 133 MHz bus bandwidth is adequate for G.729 and G.711 voice packet processing in channel banks and digital cross-connect systems. The -40C to +85C temperature range supports outdoor telecom cabinets and central-office environments without climate control. SDRAM's auto-refresh and self-refresh modes simplify power-management firmware for battery-backed telecom equipment.
Рекомендуется
Embedded Computing Platforms
Single-board computers, VME/cPCI industrial computers, and embedded PC/104 systems use the MT48LC16M16A2BG-75 IT:D as main memory for x86 or PowerPC SBCs that pre-date DDR support. The 54-VFBGA footprint fits the standard SODIMM-style layouts of legacy embedded motherboards, and the 3.3V supply matches the power rails of older chipsets without requiring level translation. For embedded Linux or VxWorks systems running in industrial environments, the wide temperature grade ensures the OS and applications remain stable across factory thermal cycles.
Рекомендуется
Medical Instrumentation
The MT48LC16M16A2BG-75 IT:D is used in legacy patient monitors, ultrasound imaging systems, and laboratory analyzers as image-acquisition and display-frame memory. The 133 MHz bandwidth supports real-time ultrasound beamformer data paths and oscillographic waveform displays. Its wide temperature range accommodates the warm enclosures of bedside monitors and the climate-controlled environments of central diagnostic stations. The synchronous SDRAM interface allows deterministic capture-to-display latency critical for diagnostic-image quality, while the compact VFBGA package enables miniaturized portable medical device designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MT48LC16M16A2BG-75 IT:D — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MT48LC16M16A2BG-75:D | MT48LC16M16A2BG-75 IT:D TR | MT48LC16M16A2B4-6A IT:G TR | MT48LC16M16A2BG-75 AT | K4S641632D | H57V2562GTR |
|---|---|---|---|---|---|---|---|
| Package | 54-VFBGA (8x14) | 54-VFBGA (8x14) - same | 54-VFBGA (8x14) - same | 54-VFBGA (8x14) - same | 54-VFBGA (8x14) - same | 54-VFBGA (8x14) - same | 54-VFBGA (8x14) - same |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology | Micron Technology | Samsung Electronics | SK Hynix |
| Memory Size | 256 Mbit (16M x 16) | 256 Mbit (16M x 16) | 256 Mbit (16M x 16) | 256 Mbit (16M x 16) | 256 Mbit (16M x 16) | 256 Mbit (16M x 16) | 256 Mbit (16M x 16) |
| Speed Grade | -75 (7.5 ns, 133 MHz) | -75 (7.5 ns, 133 MHz) | -75 (7.5 ns, 133 MHz) | -6A (6 ns, 166 MHz) | -75 (7.5 ns, 133 MHz) | PC133-compatible | PC133-compatible |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Data Bus Width | 16 bit | 16 bit | 16 bit | 16 bit (x16 organization) | 16 bit | 16 bit | 16 bit |
Ключевые отличия
- Industrial temperature grade for harsh environments (против MT48LC16M16A2BG-75:D)
- Obsolete status with documented drop-in cross-references (против K4S641632D (Samsung))
- PC133 compliance with 133 MHz verified timing (против MT48LC16M16A2B4-6A IT:G TR)
Заметки по проектированию
Estimated: the MT48LC16M16A2BG-75 IT:D draws approximately 100-150 mA during active read/write at 133 MHz, with peak surges during bank activation. Provide a minimum 10uF bulk decoupling capacitor plus 0.1uF high-frequency bypass on each VDD/VDDQ pin group. The 3.3V supply must remain within 3.0-3.6V during transients to avoid data corruption or latch-up. Use a low-dropout regulator with at least 200 mA capacity and less than 50 mV ripple for reliable PC133 compliance.
The 54-VFBGA package has 0.8 mm ball pitch - route signals on inner PCB layers with micro-via escape. Matched-impedance routing (50 ohm single-ended) is required for CLK, DQ, and control signals. Keep trace lengths matched within 1 cm to avoid clock-data skew. Place all decoupling capacitors on the same PCB layer as the BGA, directly under or adjacent to the balls. Provide a continuous ground plane under the BGA to control return-current paths and minimize EMI.
Common pitfalls with the MT48LC16M16A2BG-75 IT:D include: (1) failing to perform the proper power-up initialization sequence (PRECHARGE, AUTO-REFRESH, MODE-REGISTER SET), (2) incorrect CAS latency selection for the operating frequency - use CAS=3 at 133 MHz, CAS=2 at 100 MHz, (3) neglecting the 64 ms refresh interval (4K refresh cycles for 256 Mbit), (4) using unmatched CLK-to-DQS skew causing setup/hold violations, and (5) omitting self-refresh entry/exit sequencing during power-down modes.
Информация о соответствии
Compliance data not provided in verified web data; values set to 'unknown' rather than assumed. This is an obsolete part - consult Micron's obsolete product documentation for any historical compliance certifications.
