Texas Instruments

PCM1602Y/2K - 24-Bit 6-Channel 192kHz DAC | Texas Instruments

Артикул: PCM1602Y/2K ✓ Активен
48-LQFP, 7 mm x 7 mm Package
MOQ: 1 |

PCM1602Y/2K Обзор

The Texas Instruments PCM1602Y/2K is a 24-bit, six-channel, enhanced multilevel delta-sigma digital-to-analog converter operating at up to 192 kHz. It supports an I2S digital audio interface, provides a maximum analog output of 3.41 V, and is packaged in a 48-pin LQFP measuring 7 mm by 7 mm. Its nominal settling time is 400 microseconds, while the specified operating temperature range is -25°C to +85°C.

An audio DAC is a mixed-signal semiconductor that converts digital PCM audio samples into left- and right-channel analog voltage signals. A six-channel DAC can drive three stereo pairs, making the device suitable for multichannel audio equipment, home-theater systems, digital mixing consoles, and active speaker designs. Within the broader hierarchy, PCM1602Y/2K belongs to the audio DAC, data converter, and signal-conversion IC categories.

The primary features of PCM1602Y/2K include 24-bit resolution, a 192 kHz maximum sampling rate, six output channels, enhanced multilevel delta-sigma architecture, and an I2S interface. The six-channel architecture reduces the number of separate stereo DACs required in a multichannel design, while the 192 kHz capability supports high-resolution audio signal paths. Its 48-LQFP package provides a defined surface-mount footprint for audio equipment with moderate connector density.

The enhanced multilevel delta-sigma architecture performs digital-to-analog conversion by shaping quantization noise away from the signal band and reconstructing the analog waveform through an internal conversion network and output stage. The 3.41 V maximum analog output provides a defined upper limit for the converter's analog output range. Its 400 microsecond nominal settling time describes the response interval associated with the device's settling behavior and is an important consideration when channels must be initialized or updated in a controlled sequence.

Typical uses include six-channel consumer audio receivers, home-theater preamplifiers, digital mixing consoles, multichannel headphone and line-output boards, active loudspeaker electronics, and professional audio interfaces. In each case, the I2S interface can accept digital audio from a source processor, while six analog outputs reduce channel-conversion component count. Stereo-only equipment would use only the required channel pairs, but the unused outputs must still be handled according to the manufacturer’s application guidance.

The most important design consideration is analog-output implementation. Follow the manufacturer’s reference circuit for output filtering, grounding, bypass capacitance, and digital-interface timing, and preserve the specified 3.41 V maximum analog output. Keep high-current digital and switching circuitry away from the analog output network, and use a quiet ground-plane strategy to reduce channel-to-channel noise coupling.

This product page organizes the converter’s verified capabilities, package information, sourcing paths, application guidance, and available same-footprint comparison. It also separates practical design guidance from raw specifications so engineers can evaluate the PCM1602Y/2K for multichannel audio systems before committing to a board design.

Аналоги без доработки для PCM1602Y/2K — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

PCM1602APTR

✅ Прямая замена
📦 48-LQFP (7x7)
Same 48-LQFP footprint and terminal arrangement; comparison identifies consistent main performance parameters, with the exact ordering suffix differing

📋 Справочный аналог (нет в каталоге)

PCM1602Y/2K Максимальные параметры и электрические характеристики

Converter Type 24-bit enhanced multilevel delta-sigma audio DAC
Number of Output Channels 6 channels
Bit Resolution 24 bit
Maximum Sampling Rate 192 kHz
Digital Audio Interface I2S
Maximum Analog Output 3.41 V
Nominal Settling Time 400 us
Диапазон рабочих температур -25°C to +85°C
Корпус 48-LQFP, 7 mm x 7 mm
Total Pin Count 48 pins
Тип монтажа Surface mount
Analog Output Configuration 6-channel audio DAC
Converter Architecture Enhanced multilevel delta-sigma
Audio Application Multichannel audio conversion

Руководство по цоколевке PCM1602Y/2K в корпусе 48-lqfp, 7 mm x 7 mm

Цоколевка для PCM1602Y/2K (корпус 48-lqfp, 7 mm x 7 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 48-lqfp, 7 mm x 7 mm для PCM1602Y/2K

Нет подробных данных о распиновке для PCM1602Y/2K.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PCM1602Y/2K подходит для 6 применениеs: Home-Theater Receiver, Digital Mixing Console, Multichannel Audio Preamp, Professional Audio Interface, Active Loudspeaker Electronics, Digital Speaker and Amplifier System.

🎧

Home-Theater Receiver

The PCM1602Y/2K fits a home-theater receiver that must convert digital surround-sound audio into six analog outputs. Its six-channel architecture maps to three stereo output pairs, while the 24-bit resolution and 192 kHz maximum sampling rate support high-resolution source material. The I2S interface allows connection to a digital audio processor, and the maximum analog output is specified at 3.41 V. The implementation should follow the manufacturer’s reference circuit for output filtering, bypass placement, and grounding. Engineers should also verify the receiver’s supported sample rates and clock topology before finalizing the digital interface.

⚡

Digital Mixing Console

A digital mixing console can use the PCM1602Y/2K to convert processed digital channels into analog line-level outputs. Six channels provide three stereo busses in a single converter, simplifying synchronization across multiple output pairs. The 192 kHz maximum rate supports high-rate studio workflows, while the 24-bit architecture preserves substantial numerical detail through conversion. Because the 400 microsecond nominal settling time influences channel-update behavior, console designers should confirm timing requirements against the finished signal path. Output filtering, analog grounding, and channel-to-channel isolation should follow the manufacturer’s recommended application layout.

🔊

Multichannel Audio Preamp

The PCM1602Y/2K is suitable for a multichannel preamplifier requiring three synchronized stereo analog outputs. A single six-channel converter reduces the number of audio conversion packages compared with separate stereo DACs, while the I2S input accepts digital audio from a source-control device. Its 24-bit, 192 kHz capability suits modern high-resolution audio paths. The maximum analog output of 3.41 V provides the design boundary for downstream gain stages, but the actual signal level depends on the manufacturer’s output-network implementation. Verify output swing, filtering, and grounding before sizing line-driver and coupling circuitry.

🖥️

Professional Audio Interface

The PCM1602Y/2K can support multichannel outputs in a professional audio interface when the interface uses an I2S digital audio path. Six converter outputs allow three stereo monitor or playback channels to share one device, and the maximum 192 kHz rate accommodates high-resolution multichannel workflows. The nominal 400 microsecond settling time is relevant when multiple channels are enabled or updated as a group. For low-noise performance, place the analog outputs and their reconstruction filters away from digital clocks and switching converters. The final channel count and operating mode must be selected from the manufacturer’s supported configuration tables.

🔊

Active Loudspeaker Electronics

The PCM1602Y/2K can serve as the digital-to-analog stage in an active loudspeaker controller or multiway amplifier board that accepts I2S audio. Its six outputs permit three stereo groups to be converted before amplification and crossover processing. The 24-bit resolution and 192 kHz maximum rate support high-fidelity digital source signals, while the 48-LQFP package provides a defined surface-mount implementation. The designer must preserve analog return paths and implement the manufacturer’s required output filtering. For an 8-channel system, two six-channel converters may be needed, subject to valid clocking and channel-mapping requirements.

🌐

Digital Speaker and Amplifier System

The PCM1602Y/2K fits a digital speaker or networked-amplifier system that receives multichannel I2S audio and requires local analog conversion. Three stereo output groups can feed amplification and crossover stages from one converter, reducing package count compared with separate stereo devices. The 192 kHz sampling capability is useful when the upstream system transports high-rate audio, and the 24-bit resolution supports detailed signal reconstruction. Because the converter’s analog output is limited to 3.41 V, downstream amplifier gain must be selected accordingly. Validate the reference output network, channel mapping, and thermal performance of the complete amplifier board.

Сводка рекомендуемых товаров

PCM1602Y/2K Texas Instruments Используется в: Home-Theater Receiver, Digital Mixing Console, Multichannel Audio Preamp, Professional Audio Interface, Active Loudspeaker Electronics, Digital Speaker and Amplifier System PCM1602APTR Same-footprint production alternative Используется в: Home-Theater Receiver, Digital Mixing Console, Multichannel Audio Preamp, Professional Audio Interface, Active Loudspeaker Electronics, Digital Speaker and Amplifier System
What is the PCM1602Y/2K?
The PCM1602Y/2K is a Texas Instruments 24-bit, six-channel enhanced multilevel delta-sigma audio digital-to-analog converter with a maximum sampling rate of 192 kHz and an I2S interface. According to the manufacturer datasheet, it is intended for multichannel audio conversion and is offered in a 48-LQFP package measuring 7 mm by 7 mm. The device provides three stereo output channels while accepting synchronized digital audio through its serial interface.
How many channels and bits does the PCM1602Y/2K support?
The PCM1602Y/2K supports six analog output channels at up to 24-bit resolution. This arrangement provides three stereo channel pairs and can simplify a multichannel audio receiver, digital mixer, or preamplifier by replacing separate stereo converter stages. The manufacturer datasheet identifies the device as a six-channel, 24-bit, enhanced multilevel delta-sigma DAC operating at up to 192 kHz.
What is the maximum sampling rate of PCM1602Y/2K?
The PCM1602Y/2K supports a maximum sampling rate of 192 kHz. According to the Texas Instruments datasheet, the converter is a 24-bit, six-channel enhanced multilevel delta-sigma DAC, so it can process high-resolution multichannel PCM streams rather than being limited to conventional CD-rate operation. System timing and supported serial formats must also satisfy the interface requirements described in the datasheet.
Where can I download the PCM1602Y/2K datasheet PDF?
The PCM1602Y/2K datasheet PDF can be reached through the linked datasheet page for the Texas Instruments device. It identifies the converter as a 24-bit, 192 kHz, six-channel enhanced multilevel delta-sigma DAC in a 48-LQFP package. Use the manufacturer document for authoritative pin descriptions, electrical limits, interface timing, recommended application circuits, and output-filter implementation details.
Where can I find the PCM1602Y/2K pinout?
The PCM1602Y/2K pinout is contained in the Texas Instruments datasheet and is not reproduced here because the public listing does not provide the individual terminal names. The package is a 48-LQFP, so the schematic and layout should be checked against all 48 numbered terminals, including power, ground, digital interface, clock, and analog-output assignments. Do not infer unused connections from the package outline alone.
What is the PCM1602Y/2K equivalent to?
PCM1602APTR is the closest identified same-manufacturer alternative because the comparison describes consistent terminals, package, and principal performance characteristics. The PCM1602Y/2K remains the preferred ordering reference for this page. Before substituting PCM1602APTR, verify the complete pin description, ordering suffix, analog output network, supply requirements, and interface timing against the current manufacturer documentation for both devices.
What can replace the PCM1602Y/2K on an existing PCB?
PCM1602APTR is the available candidate identified as a complete replacement with consistent terminals and package. Because no cross-manufacturer pin-compatible alternative was established, a broader drop-in replacement list cannot be made without risking an incorrect PCB fit or interface mismatch. Verify the 48-LQFP land pattern, pin functions, clocking, analog-output circuitry, and operating limits before approving PCM1602APTR for production.
Is PCM1602Y/2K suitable for home-theater and multichannel audio systems?
The PCM1602Y/2K is suitable for home-theater and multichannel audio systems requiring three stereo output pairs. Its six-channel organization, 24-bit resolution, 192 kHz maximum sampling rate, and I2S interface align with digital receivers, preamplifiers, and sound processors. The board must preserve the manufacturer’s analog-output network and grounding recommendations to obtain the intended channel performance.
When should I choose PCM1602Y/2K over PCM1602APTR?
Choose PCM1602Y/2K when it is the approved ordering configuration for the design and the required supplier inventory is available. PCM1602APTR appears suitable as a same-footprint alternative because its terminals and package are described as consistent. The final choice should follow a complete review of ordering suffixes, electrical details, lifecycle status, and the exact operating conditions of the finished audio product.
PCM1602Y/2K vs PCM1602APTR: which is better for a new design?
PCM1602Y/2K is the better default for a new design because it is the designated target device, while PCM1602APTR is the identified replacement candidate. Both are listed as 24-bit, six-channel, 192 kHz devices in the 48-LQFP footprint, and the comparison states that their terminals and packages are consistent. Final selection still requires checking the current datasheet revisions and production requirements.
Where can I buy the PCM1602Y/2K online?
Use the Request a Quote form on this page to ask for the Texas Instruments PCM1602Y/2K, current availability, and order routing. The form is the appropriate commercial channel for obtaining a quotation, lead-time confirmation, and exact MPN verification. Before release, confirm that the supplier is quoting PCM1602Y/2K rather than the related PCM1602Y or PCM1602APTR ordering configuration.
What is the price of PCM1602Y/2K?
Submit the PCM1602Y/2K MPN through the Request a Quote form on this page for current pricing. No static unit or quantity-break figure is stated because pricing changes with inventory, volume, and order configuration. The request should also confirm the 48-LQFP package, manufacturer part number, delivery quantity, and whether any traceable authorized-channel documentation is required.
What is the lead time for PCM1602Y/2K?
Request the current lead time through the Request a Quote form on this page. The form allows the exact MPN, order quantity, and target delivery schedule to be stated so the current supply position can be confirmed. For production planning, request a written lead-time commitment and identify any acceptable substitutions rather than assuming that the related PCM1602Y listing has identical availability.
Is PCM1602Y/2K in stock?
The current PCM1602Y/2K stock position should be confirmed through the Request a Quote form on this page. A distributor search-result title alone does not guarantee that the exact slash-suffix ordering configuration is immediately available. Include the required quantity and target delivery date in the request, and ask the supplier to confirm the manufacturer part number, package, and any traceability requirements.
What are the key specifications of PCM1602Y/2K that engineers should know?
The key PCM1602Y/2K specifications are 24-bit resolution, six output channels, a maximum sampling rate of 192 kHz, an I2S interface, 3.41 V maximum analog output, a nominal 400 microsecond settling time, and a -25°C to +85°C operating range. The device uses a 48-LQFP, 7 mm by 7 mm package. These parameters define its core suitability for multichannel audio conversion.

Справочные инженерные данные для PCM1602Y/2K — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PCM1602Y/2K when building a six-channel, 24-bit, 192 kHz audio converter around an I2S source and the 48-LQFP footprint is already fixed. It is particularly appropriate for home-theater receivers, digital preamplifiers, mixing consoles, and professional interfaces that need three synchronized stereo outputs. PCM1602APTR is the preferred identified alternative when that ordering configuration is approved for the supply chain, because its terminals and package are described as consistent with the target. Do not select a substitute solely by matching the 48-LQFP outline: verify every pin function, clock requirement, analog-output network, and electrical limit. If the design requires fewer than three stereo pairs, a lower-channel converter may reduce cost and board area, but such a device would not be a strict drop-in substitute for this footprint.

Сравнение с аналогами

Параметр Этот товар PCM1602APTR
Brand Texas Instruments Texas Instruments
Package 48-LQFP (7x7) 48-LQFP (7x7)
Converter Type Enhanced multilevel delta-sigma DAC Enhanced multilevel delta-sigma DAC
Resolution 24 bit 24 bit
Output Channels 6 channels 6 channels
Maximum Sampling Rate 192 kHz 192 kHz
Digital Interface I2S I2S

Ключевые отличия

  • Six-channel integration in one converter (против PCM1602APTR)
  • Direct six-channel I2S audio conversion (против PCM1602APTR)
  • Defined 3.41 V analog-output boundary (против PCM1602APTR)
  • Defined nominal settling behavior (против PCM1602APTR)

Заметки по проектированию

Place the PCM1602Y/2K analog-output network and its bypass components close to the converter pins, and route digital clock and data traces away from sensitive output nodes. Use the manufacturer’s reference layout to determine component placement and trace geometry for the 48-LQFP footprint. Continuous ground-plane construction is generally preferable to fragmented return paths because the device combines a high-speed digital interface with analog output stages.

Follow the manufacturer’s supply, bypass-capacitor, and power-sequence recommendations exactly. Decoupling components should be positioned at the relevant supply pins with short, direct connections so switching noise does not propagate into the converter’s analog outputs. Before finalizing amplifier gain or coupling networks, confirm that downstream circuitry remains compatible with the specified 3.41 V maximum analog output and the device’s actual output-swing conditions.

Do not treat PCM1602Y, PCM1602Y/2K, and PCM1602APTR as interchangeable solely because their product names are similar. Confirm the exact ordering suffix, pin functions, package, and interface configuration before releasing a purchase order or replacement. For an existing PCB, use the manufacturer’s pin-description table and application circuit rather than inferring connections from another package or ordering configuration.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No compliance declarations were identified in the retrieved product information. The component is an audio converter IC rather than an automotive-qualified device.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

PCM1602Y/2K datasheet PCM1602Y/2K pinout PCM1602Y/2K datasheet pdf PCM1602Y/2K equivalent PCM1602Y/2K replacement PCM1602Y/2K vs PCM1602APTR PCM1602Y/2K price PCM1602Y/2K stock Texas Instruments PCM1602Y/2K PCM1602Y/2K application circuit PCM1602Y/2K 48-LQFP footprint PCM1602Y/2K 6 channel DAC PCM1602Y/2K 192kHz I2S

Связанные компоненты & термины

Texas Instruments PCM1602Y/2K PCM1602APTR PCM1602Y digital-to-analog converter audio DAC multichannel DAC delta-sigma converter enhanced multilevel delta-sigma 24-bit DAC 192 kHz sampling I2S interface 48-LQFP LQFP package surface-mount package audio receiver digital mixing console home-theater preamplifier professional audio interface active loudspeaker analog output settling time semiconductor
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ