Microchip Technology

PIC24FJ64GL302-I/ML - 32MHz Low-Power LCD MCU | Microchip

Артикул: PIC24FJ64GL302-I/ML ✓ Активен
Down to a few hundreds of nA Id 28-QFN (6x6 mm) Package 32 MHz Speed 64 KB ECC Flash Memory
MOQ: 1 |

PIC24FJ64GL302-I/ML Обзор

The Microchip Technology PIC24FJ64GL302-I/ML is a 16-bit PIC24-family low-power microcontroller operating at up to 32 MHz, with 64 KB of Flash memory, 8 KB of RAM, and an integrated segmented LCD controller in a 28-QFN 6x6 mm package. The device is positioned for compact battery-powered instruments, industrial panels, and display modules that require fast control performance alongside low-power operation.

A low-power microcontroller is a semiconductor device designed to execute embedded control functions while minimizing energy consumption during active and inactive operating states. The PIC24FJ64GL family combines a 16-bit RISC-based PIC24 core with core-independent peripherals, segmented LCD support, and XLP low-power features. This places the MCU within the hierarchy of embedded controller, microcontroller, low-power MCU, and power-management semiconductor.

Key features include 32 MHz operation, 16 MIPS instruction throughput, 64 KB of ECC Flash, 8 KB of SRAM, and a segmented LCD controller supporting up to 256 segments with eight commons and 32 segment outputs. Core-independent LCD animation supports alternating dual display, blinking, and blanking functions. The charge-pump contrast-management feature is particularly useful in battery-powered products where the LCD supply can vary as the cell discharges.

The PIC24 core provides a 16-bit architecture suitable for control loops and moderate arithmetic workloads, while core-independent peripherals allow selected functions to operate with reduced CPU involvement. The integrated LCD hardware reduces the need for an external display controller in glass-based instruments. Connectivity identified for this device includes I2C, SPI, and UART interfaces, while listed peripherals include the LCD controller, watchdog timer, PWM, and DMA.

Typical uses include segmented LCD thermometers, industrial measurement panels, compact energy meters, laboratory instruments, and handheld devices with monochrome or segmented displays. The -I/ML ordering designation identifies the temperature-grade and package configuration, and the 28-QFN 6x6 mm body supports compact board layouts. Exact pin assignments and exposed-pad requirements should be taken from the Microchip manufacturer datasheet.

When laying out the PCB, reserve the exposed pad and thermal-via structure specified for the 28-QFN package, and route sensitive LCD, oscillator, and communication signals away from high-current switching nodes. Confirm operating voltage, clock, programming, and peripheral requirements against the device documentation before releasing the firmware and PCB.

This page consolidates the exact ordering information, package characteristics, low-power LCD capabilities, sourcing workflow, and engineering trade-offs for engineers evaluating the PIC24FJ64GL302-I/ML in low-power display designs.

Аналоги без доработки для PIC24FJ64GL302-I/ML — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PIC24FJ64GL302-I/ML (тот же форм-фактор и посадочное место) — отличается по Package, Core Architecture, Timers, ADC, Communication.

Microchip Technology
Package: 28-pin QFN (6x6 mm)
Core Architecture: 16-bit MIPS (PIC24F)
Timers: Multiple 16-bit and 32-bit timers (per family spec)
Microchip Technology
Package: 28-pin QFN (6x6 mm) with exposed pad (ML)
Core Architecture: PIC24F 16-bit RISC modified Harvard
Timers: Five 16-bit timers
Microchip Technology
Core Architecture: PIC 16-bit modified Harvard
Timers: 16-bit timers, RTCC with 32.768 kHz crystal support
Communication: I2C, SPI, UART

PIC24FJ64GL302-E/ML

✅ Прямая замена
Microchip Technology
📦 28-QFN (6x6 mm)
PIC24FJ 'GL' (XLP) · PIC 16-bit modified Harvard · 32 MHz (16 MIPS) · 64 KB (64K x 8) · 8 KB · 2.0 V to 3.6 V · -40 °C to +125 °C (E-Temp) · 28-QFN (6x6 mm)

Уточнить цену

Открыть даташит →

PIC24FJ64GL301-I/ML

✅ Прямая замена ⚠️ Характеристики не проверены
📦 28-QFN (6x6 mm)
Same-brand low-power LCD family and 32 MHz architecture; LCD and peripheral feature set differs from GL302, with both variants identified around 64 KB Flash and 8 KB RAM

📋 Справочный аналог (нет в каталоге)

PIC24FJ64GL303-I/ML

✅ Прямая замена ⚠️ Характеристики не проверены
📦 28-QFN (6x6 mm)
Same-brand GL-series 32 MHz low-power LCD architecture and 28-QFN format; the GL303 peripheral mix differs while shared core, memory, and display functions require firmware and pin-level review

📋 Справочный аналог (нет в каталоге)

PIC24FJ64GA002-I/ML

✅ Прямая замена
Microchip Technology
📦 28-QFN (6x6 mm)
PIC24F 16-bit RISC modified Harvard · 64 KB (22K x 24 instruction words) · 8 KB · 32 MHz (16 MIPS) · 2.0 V to 3.6 V · -40C to +85C (Industrial, 'I') · 21 · 10-bit, 16-channel, 500 ksps

Уточнить цену

Открыть даташит →

PIC24FJ64GL300-I/ML

✅ Прямая замена ⚠️ Характеристики не проверены
📦 28-QFN (6x6 mm)
Same-brand 28-QFN PIC24FJ64GL low-power LCD platform with matching 32 MHz and 64 KB Flash positioning; RAM and specific peripheral assignments differ and must be checked against the target pinout

📋 Справочный аналог (нет в каталоге)

PIC24FJ64GL302-I/ML Максимальные параметры и электрические характеристики

Product Type 16-bit low-power microcontroller
CPU Family PIC24 16-bit RISC
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Flash Memory 64 KB ECC Flash
Program Memory Organization 64K x 8 words
Data RAM 8 KB
LCD Maximum Segment Count 256 segments
LCD Common Outputs 8 commons
LCD Segment Outputs 32 segments
Core-Independent LCD Animation Alternating dual display, blinking, and blanking
LCD Contrast Management Integrated charge pump
Serial Interfaces I2C, SPI, and UART
Listed Peripherals WDT, LCD, PWM, and DMA
Low-Power Technology XLP
Sleep Current Down to a few hundreds of nA
Корпус 28-QFN (6x6 mm)
Тип монтажа Surface mount

Руководство по цоколевке PIC24FJ64GL302-I/ML в корпусе 28-qfn (6x6 mm)

Цоколевка для PIC24FJ64GL302-I/ML (корпус 28-qfn (6x6 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 28-qfn (6x6 mm) для PIC24FJ64GL302-I/ML

Нет подробных данных о распиновке для PIC24FJ64GL302-I/ML.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PIC24FJ64GL302-I/ML подходит для 6 применениеs: Battery-Powered Thermometers, Industrial Measurement Panels, Energy and Utility Meters, Portable Test Instruments, Segmented Display Control Modules, Battery-Powered Sensor Nodes.

💊

Battery-Powered Thermometers

The PIC24FJ64GL302-I/ML fits compact thermometers that combine a segmented temperature display with low-power sensing. Its 32 MHz PIC24 core provides ample control performance, while the integrated segmented LCD controller can drive as many as 256 segments and an integrated charge pump manages display contrast as the battery voltage changes. Core-independent blinking, blanking, and alternating-display animation can reduce visual distractions without continuous CPU activity. The XLP architecture and sleep current down to a few hundreds of nA also support long battery life between measurements. A practical design uses the LCD controller directly for the glass display, a dedicated sensor interface for temperature conversion, and a low-duty-cycle wake/sleep sequence to minimize average power.

🏭

Industrial Measurement Panels

The PIC24FJ64GL302-I/ML is suitable for compact industrial meter and control panels requiring local feedback without a display controller. The 16-bit PIC24 core and 16 MIPS throughput can supervise measurements and control logic, while 64 KB of ECC Flash provides room for application code and 8 KB of RAM supports working buffers. The segmented LCD subsystem handles up to 256 segments, with eight commons and 32 segment outputs, reducing external display-driver complexity. UART or SPI connectivity can connect sensors, while PWM, DMA, and the watchdog timer support periodic control and reliable background operation. The -I/ML industrial ordering configuration is appropriate for equipment expected to operate across industrial temperature conditions when the complete electrical limits are confirmed in the manufacturer datasheet.

⚡

Energy and Utility Meters

The PIC24FJ64GL302-I/ML can serve as the controller in a segmented-display energy meter or utility instrument. Its 64 KB ECC Flash supports metering algorithms, calibration tables, and communications firmware, while the 8 KB RAM provides working space for sampled values and display state. The integrated LCD controller supports as many as 256 segments, and autonomous blinking or blanking can indicate operating states without continuous MCU intervention. I2C, SPI, and UART interfaces allow connection to current sensors, memory, or a communications module. Because meters are often battery or energy-harvesting powered, the XLP feature set and sleep current down to a few hundreds of nA are central to the architecture. Validate the LCD duty cycle and peripheral activity because those factors dominate practical system-level energy consumption.

🔧

Portable Test Instruments

The PIC24FJ64GL302-I/ML is useful in handheld meters and portable test instruments that combine a segmented display with low-power operation. The 32 MHz CPU provides fast control and arithmetic performance, and the 16-bit architecture is well suited to instrument control loops that would be constrained by an 8-bit MCU. The LCD controller reduces the need for a separate glass driver, while the charge pump maintains contrast under changing supply conditions. UART and SPI interfaces support probes, external memory, calibration equipment, or a host computer. Core-independent LCD animation can highlight measurement states or alerts while the processor performs acquisition and calculations. The 28-QFN 6x6 mm package also permits a compact handheld layout, although exposed-pad soldering and thermal management must follow the manufacturer package drawing.

📺

Segmented Display Control Modules

The PIC24FJ64GL302-I/ML can serve as the local controller in a reusable segmented-display module. Its integrated LCD engine supports up to 256 segments through eight commons and 32 segment outputs, while core-independent animation can perform alternating dual display, blinking, and blanking without requiring continuous CPU commands. A 32 MHz PIC24 core and 64 KB of ECC Flash leave substantial room for application logic, menu handling, and communications, while 8 KB of RAM supports display and control buffers. The I2C, SPI, and UART interfaces enable connection to sensors, host processors, and calibration equipment. Its XLP low-power capability is particularly advantageous for remote panels and battery-operated displays. Firmware should use the LCD peripheral's autonomous functions where possible to reduce wake-ups and extend service intervals.

🧩

Battery-Powered Sensor Nodes

The PIC24FJ64GL302-I/ML is appropriate for a local sensor node that periodically acquires data and presents status on a segmented LCD. I2C and SPI support common digital sensors and memories, UART provides a host or configuration link, and DMA can move data with limited processor involvement. The 8 KB RAM supports temporary acquisition and processing buffers, while 64 KB of ECC Flash accommodates protocol, filtering, and logging code. When the node must remain available for local status display, the LCD controller's autonomous animation reduces processor load. Alternatively, the display can be blanked during long sleep periods to lower energy use. The manufacturer's XLP power-management options and sleep current down to a few hundreds of nA help optimize duty-cycled operation, but sensor standby current and LCD segment loading must also be included in the final power budget.

Сводка рекомендуемых товаров

PIC24FJ64GL302-E/ML Microchip Technology Используется в: Battery-Powered Thermometers, Industrial Measurement Panels, Energy and Utility Meters, Segmented Display Control Modules PIC24FJ64GL301-I/ML Same-family low-power LCD controller Используется в: Battery-Powered Thermometers, Portable Test Instruments PIC24FJ64GA002-I/ML Microchip Technology Используется в: Industrial Measurement Panels, Battery-Powered Sensor Nodes PIC24FJ64GL303-I/ML Same-family low-power GL controller Используется в: Energy and Utility Meters, Segmented Display Control Modules PIC24FJ64GL300-I/ML Related 28-QFN GL controller Используется в: Portable Test Instruments, Battery-Powered Sensor Nodes
What are the key specifications of PIC24FJ64GL302-I/ML that engineers should know?
The PIC24FJ64GL302-I/ML combines a 16-bit PIC24 core, 32 MHz operation, 16 MIPS throughput, 64 KB of ECC Flash, and 8 KB of RAM in a 28-QFN 6x6 mm package. According to the Microchip manufacturer datasheet, it also integrates a segmented LCD controller supporting up to 256 segments, eight commons, and 32 segment outputs. Core-independent LCD animation, an integrated charge pump, I2C, SPI, UART, watchdog timer, PWM, DMA, and XLP low-power operation make it well suited to compact, battery-powered display products.
Where can I download the PIC24FJ64GL302-I/ML datasheet PDF?
The official PIC24FJ64GL302-I/ML documentation is available through Microchip's product page at https://www.microchip.com/en-us/product/PIC24FJ64GL302. Select the Documents & Datasheets section for the manufacturer datasheet, pin definitions, electrical characteristics, and package drawings. Use the exact -I/ML ordering code when reviewing grade and package information, because the base PIC24FJ64GL302 family is offered in multiple package and temperature configurations.
Where can I find the PIC24FJ64GL302-I/ML pinout and 28-QFN footprint?
The PIC24FJ64GL302-I/ML pinout is documented in the Microchip manufacturer datasheet under the 28-QFN package information. The verified device listing identifies a 28-QFN package with a 6x6 mm body. Before layout, verify every signal, exposed-pad connection, thermal-via pattern, and land geometry in the manufacturer's package drawing. The 28-pin QFN library representation is used here, but its final PCB footprint must follow the exact Microchip land-pattern guidance.
Is the PIC24FJ64GL302-I/ML suitable for battery-powered LCD instruments?
Yes, the PIC24FJ64GL302-I/ML is suitable for battery-powered LCD instruments because it combines XLP low-power operation, sleep current down to a few hundreds of nA, and an integrated segmented LCD controller. Its charge pump manages LCD contrast, while autonomous animation can alternate displays, blink, or blank segments without continuous CPU intervention. These features help conserve energy, but the final battery life still depends on display duty cycle, sensor activity, and the selected sleep configuration.
What can replace the PIC24FJ64GL302-I/ML on the same PCB?
The closest documented alternatives are same-package Microchip PIC24FJ64GL and PIC24FJ64GA devices configured in the 28-QFN 6x6 mm format. A suitable replacement must be checked for pin-to-pin compatibility, Flash and RAM capacity, LCD pin assignment, peripheral mapping, operating voltage, temperature grade, and programming compatibility. PIC24FJ64GL302-E/ML provides a web-listed temperature-grade alternative, while PIC24FJ64GL301-I/ML and PIC24FJ64GA002-I/ML provide related same-package options with feature-set differences that require firmware review.
What is the difference between PIC24FJ64GL302-I/ML and PIC24FJ64GL302-E/ML?
Both are PIC24FJ64GL302 variants in the 28-QFN 6x6 mm package, and both use the same 32 MHz, 64 KB Flash, 8 KB RAM, and integrated LCD platform. Their ordering suffixes identify different manufacturer temperature grades. The -I/ML configuration is the industrial-temperature option, while the -E/ML listing is identified as a -40°C to +125°C option. Confirm the operating-temperature limits and full electrical specifications in the manufacturer datasheet before substituting one for the other.
When should I choose PIC24FJ64GL302-I/ML over PIC24FJ64GA002-I/ML?
Choose the PIC24FJ64GL302-I/ML when autonomous segmented-LCD animation and charge-pump contrast management are central to the design. According to Microchip product information, the GL device supports alternating dual display, blinking, and blanking, and its sleep current can fall to a few hundreds of nA. PIC24FJ64GA002-I/ML also provides 64 KB Flash, 8 KB RAM, and a 28-pin package, but it is positioned around advanced peripherals rather than the GL family's dedicated LCD animation functions.
Is PIC24FJ64GL302-I/ML the same as PIC24FJ64GA002-I/ML?
No, the PIC24FJ64GL302-I/ML and PIC24FJ64GA002-I/ML are related but not identical devices. Both are listed with 64 KB Flash, 8 KB RAM, 32 MHz operation, and a 28-pin package, but the GL302 emphasizes segmented LCD animation, charge-pump contrast control, and XLP behavior. Treat the GA002 as a same-footprint redesign candidate rather than a guaranteed drop-in replacement, and verify LCD signal mapping, peripheral assignments, voltage limits, and firmware requirements.
What is the best Microchip equivalent for PIC24FJ64GL302-I/ML?
The best Microchip equivalent depends on which features must remain unchanged. PIC24FJ64GL302-E/ML is the closest feature-led alternative in the same 28-QFN package, while PIC24FJ64GL301-I/ML and PIC24FJ64GL303-I/ML are other members of the low-power LCD family. PIC24FJ64GA002-I/ML offers 64 KB Flash, 8 KB RAM, and 32 MHz performance in a comparable package, but its advanced-peripheral orientation makes it less direct. Verify pinout and firmware compatibility before selecting any replacement.
How much power does the PIC24FJ64GL302-I/ML consume in sleep mode?
Microchip describes the PIC24FJ64GL302-I/ML family as reaching sleep current down to a few hundreds of nA while retaining the complete RAM context. The actual current depends on the regulator configuration, peripherals left active, LCD state, and sleep-entry method. Use the manufacturer's power-measurement conditions when comparing designs, and include wake-up source configuration and LCD load in system-level energy calculations. No single sleep-current value should be applied without matching those operating conditions.
What peripherals does the PIC24FJ64GL302-I/ML provide for a low-power display product?
The PIC24FJ64GL302-I/ML provides a segmented LCD controller, watchdog timer, PWM, DMA, I2C, SPI, and UART interfaces. The LCD subsystem supports as many as 256 segments through eight commons and 32 segment outputs, with core-independent animation for alternating displays, blinking, and blanking. These resources support designs in which a sensor or communications interface updates slowly while the display remains active. Pin allocation and the availability of each peripheral on the 28-QFN package must be checked in the manufacturer datasheet.
Where can I buy PIC24FJ64GL302-I/ML and check its lead time?
Use the Request a Quote form on this page to ask for PIC24FJ64GL302-I/ML availability, current lead time, and order handling for the exact -I/ML ordering code. The exact device is listed by multiple authorized supply channels, but stock and lead time can vary by quantity and package configuration. State the required quantity, date code policy, and target delivery date in the request so the quotation reflects the appropriate production commitment.
What is the price of PIC24FJ64GL302-I/ML?
The current unit price for the exact PIC24FJ64GL302-I/ML is generated through the Request a Quote form on this page. Pricing depends on order quantity, inventory position, date code requirements, and shipment destination. Submit the required quantity and packaging preference for a current quotation rather than relying on a historical catalog amount, which may not reflect current availability or production conditions.
Is PIC24FJ64GL302-I/ML in stock and available for immediate shipment?
Current stock status for the exact PIC24FJ64GL302-I/ML should be confirmed through the Request a Quote form on this page. The manufacturer product page remains active, and distributor listings identify the exact ordering code, but neither listing alone guarantees the quantity and delivery date needed for a particular build. Include your scheduled assembly date and acceptable date-code window in the request to obtain a precise availability commitment.
How should the 28-QFN layout and LCD circuitry be implemented for PIC24FJ64GL302-I/ML?
Follow the Microchip manufacturer datasheet for the 28-QFN 6x6 mm land pattern, exposed-pad connection, and thermal-via arrangement. Place required bypass capacitors close to their power pins, route the LCD outputs directly toward the display connector or glass interface, and keep switching nodes and high-current paths away from sensitive analog and communication traces. Preserve the documented exposed-pad copper area for heat dissipation and use the package drawing as the controlling authority for manufacturing.

Справочные инженерные данные для PIC24FJ64GL302-I/ML — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the PIC24FJ64GL302-I/ML when a compact, low-power instrument needs a 16-bit 32 MHz controller with 64 KB of ECC Flash, 8 KB of RAM, and a dedicated segmented LCD subsystem. Its strongest advantage is the combination of LCD animation, charge-pump contrast management, and sleep current down to a few hundreds of nA. Consider PIC24FJ64GL302-E/ML when its documented temperature range better matches the product and the target is otherwise unchanged. PIC24FJ64GL301-I/ML and PIC24FJ64GL303-I/ML are sensible same-family redesign candidates when their specific peripheral sets satisfy the design, but pin mapping and firmware must be compared. PIC24FJ64GA002-I/ML retains the same broad 32 MHz, 64 KB, 8 KB, and 28-pin platform but is not a guaranteed drop-in replacement because its advanced-peripheral focus differs from the GL302's LCD animation features. For every candidate, verify the manufacturer pin table, LCD common and segment assignment, exposed pad, voltage range, programming configuration, and peripheral multiplexing before committing the PCB.

Сравнение с аналогами

Параметр Этот товар PIC24FJ64GL302-E/ML PIC24FJ64GL301-I/ML PIC24FJ64GL303-I/ML PIC24FJ64GA002-I/ML PIC24FJ64GL300-I/ML
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-QFN (6x6 mm) 28-QFN (6x6 mm) 28-QFN (6x6 mm) 28-QFN (6x6 mm) 28-QFN (6x6 mm) 28-QFN (6x6 mm)
CPU Architecture 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz

Ключевые отличия

  • Dedicated autonomous LCD animation in the GL302 (против PIC24FJ64GA002-I/ML)
  • Integrated charge-pump contrast management (против PIC24FJ64GA002-I/ML)
  • Low-power operating platform (против PIC24FJ64GA002-I/ML)
  • Close same-package temperature-grade configuration (против PIC24FJ64GL302-E/ML)

Заметки по проектированию

Implement the 28-QFN 6x6 mm footprint directly from the Microchip manufacturer package drawing, including the exposed thermal pad, annular ring, solder mask, and paste pattern. Use a thermal-via array beneath the exposed pad if the drawing specifies it, and avoid placing copper-conflicting features under the pad unless the land pattern permits. Place required bypass capacitors close to their associated supply pins and provide a short, low-impedance ground return. Because the QFN has fine-pitch leads on all four sides, inspect the solder joints under magnification and verify assembly tolerances against the manufacturer drawing.

Build the low-power budget around the application's actual activity profile rather than the headline sleep current. The PIC24FJ64GL302-I/ML can reach sleep current down to a few hundreds of nA, but LCD segment loading, sensor standby current, regulator quiescent current, and the duration of each active interval may dominate the average consumption. Enable XLP sleep modes only after disabling or configuring active peripherals correctly. Use the manufacturer power-measurement conditions when comparing sleep states, and measure the assembled product to confirm that wake-up timing, display updates, and sensor sampling match the intended duty cycle.

Keep LCD segment and common routing away from switching power stages, high-current relays, inductors, and fast-edge clock signals. Route oscillator and communication signals over continuous ground references, and place decoupling capacitors adjacent to the relevant pins instead of consolidating all capacitors at a power-entry point. If the design includes external memory or a sensor on SPI, preserve short return paths and observe the peripheral timing requirements in the manufacturer datasheet. Continuous copper under the MCU is useful for thermal performance, but signal-routing priority and the prescribed exposed-pad pattern must be reconciled before layout release.

Do not substitute an MCU solely because its Flash and RAM ratings match. Verify the exact 28-QFN pin assignments, LCD common and segment mapping, oscillator configuration, peripheral multiplexing, operating-voltage limits, programming interface, and exposed-pad requirements. A change within the GL family can alter LCD animation features or peripheral availability even when the core and memory remain similar. For a redesign, preserve the original schematic, compare every signal in the manufacturer pin-description tables, and conduct firmware bring-up with the LCD disconnected or configured safely before attaching the final glass display.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The exact PIC24FJ64GL302-I/ML compliance status was not established from the manufacturer or distributor information. A separate web listing identifies PIC24FJ64GA002-I/ML as RoHS-compliant, but that result was not applied to the target ordering code.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

PIC24FJ64GL302-I/ML datasheet PIC24FJ64GL302-I/ML pinout PIC24FJ64GL302-I/ML datasheet pdf PIC24FJ64GL302-I/ML 28-QFN PIC24FJ64GL302-I/ML equivalent PIC24FJ64GL302-I/ML replacement PIC24FJ64GL302-I/ML cross reference PIC24FJ64GL302 vs PIC24FJ64GA002 PIC24FJ64GL302-I/ML price PIC24FJ64GL302-I/ML stock Microchip PIC24FJ64GL302-I/ML PIC24FJ64GL302 low power LCD controller

Связанные компоненты & термины

Microchip Technology PIC24FJ64GL302-I/ML PIC24FJ64GL302 PIC24FJ64GL302-E/ML PIC24FJ64GL301-I/ML PIC24FJ64GL303-I/ML PIC24FJ64GL300-I/ML PIC24FJ64GA002-I/ML PIC24 microcontroller low-power MCU embedded controller 16-bit RISC segmented LCD controller LCD charge pump core-independent peripherals XLP ECC Flash DMA UART SPI I2C 28-QFN QFN family surface-mount package
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ