PIC24FJ64GL302-I/ML - 32MHz Low-Power LCD MCU | Microchip
N.º de pieza: PIC24FJ64GL302-I/ML ✓ ActivoPIC24FJ64GL302-I/ML Descripción general
A low-power microcontroller is a semiconductor device designed to execute embedded control functions while minimizing energy consumption during active and inactive operating states. The PIC24FJ64GL family combines a 16-bit RISC-based PIC24 core with core-independent peripherals, segmented LCD support, and XLP low-power features. This places the MCU within the hierarchy of embedded controller, microcontroller, low-power MCU, and power-management semiconductor.
Key features include 32 MHz operation, 16 MIPS instruction throughput, 64 KB of ECC Flash, 8 KB of SRAM, and a segmented LCD controller supporting up to 256 segments with eight commons and 32 segment outputs. Core-independent LCD animation supports alternating dual display, blinking, and blanking functions. The charge-pump contrast-management feature is particularly useful in battery-powered products where the LCD supply can vary as the cell discharges.
The PIC24 core provides a 16-bit architecture suitable for control loops and moderate arithmetic workloads, while core-independent peripherals allow selected functions to operate with reduced CPU involvement. The integrated LCD hardware reduces the need for an external display controller in glass-based instruments. Connectivity identified for this device includes I2C, SPI, and UART interfaces, while listed peripherals include the LCD controller, watchdog timer, PWM, and DMA.
Typical uses include segmented LCD thermometers, industrial measurement panels, compact energy meters, laboratory instruments, and handheld devices with monochrome or segmented displays. The -I/ML ordering designation identifies the temperature-grade and package configuration, and the 28-QFN 6x6 mm body supports compact board layouts. Exact pin assignments and exposed-pad requirements should be taken from the Microchip manufacturer datasheet.
When laying out the PCB, reserve the exposed pad and thermal-via structure specified for the 28-QFN package, and route sensitive LCD, oscillator, and communication signals away from high-current switching nodes. Confirm operating voltage, clock, programming, and peripheral requirements against the device documentation before releasing the firmware and PCB.
This page consolidates the exact ordering information, package characteristics, low-power LCD capabilities, sourcing workflow, and engineering trade-offs for engineers evaluating the PIC24FJ64GL302-I/ML in low-power display designs.
Alternativas directas para PIC24FJ64GL302-I/ML — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC24FJ64GL302-I/ML (mismo factor de forma y huella) — difiere en Package, Core Architecture, Timers, ADC, Communication.
PIC24FJ64GL302-E/ML
✅ Sustitución directaConsulte el precio
Ver hoja de datos →PIC24FJ64GL301-I/ML
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PIC24FJ64GL303-I/ML
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PIC24FJ64GA002-I/ML
✅ Sustitución directaConsulte el precio
Ver hoja de datos →PIC24FJ64GL300-I/ML
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PIC24FJ64GL302-I/ML Valores máximos y características eléctricas
| Product Type | 16-bit low-power microcontroller |
| CPU Family | PIC24 16-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Flash Memory | 64 KB ECC Flash |
| Program Memory Organization | 64K x 8 words |
| Data RAM | 8 KB |
| LCD Maximum Segment Count | 256 segments |
| LCD Common Outputs | 8 commons |
| LCD Segment Outputs | 32 segments |
| Core-Independent LCD Animation | Alternating dual display, blinking, and blanking |
| LCD Contrast Management | Integrated charge pump |
| Serial Interfaces | I2C, SPI, and UART |
| Listed Peripherals | WDT, LCD, PWM, and DMA |
| Low-Power Technology | XLP |
| Sleep Current | Down to a few hundreds of nA |
| Encapsulado | 28-QFN (6x6 mm) |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de PIC24FJ64GL302-I/ML 28-qfn (6x6 mm)
Configuración de pines para PIC24FJ64GL302-I/ML (encapsulado 28-qfn (6x6 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para PIC24FJ64GL302-I/ML.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PIC24FJ64GL302-I/ML es adecuado para 6 aplicacións: Battery-Powered Thermometers, Industrial Measurement Panels, Energy and Utility Meters, Portable Test Instruments, Segmented Display Control Modules, Battery-Powered Sensor Nodes.
Battery-Powered Thermometers
The PIC24FJ64GL302-I/ML fits compact thermometers that combine a segmented temperature display with low-power sensing. Its 32 MHz PIC24 core provides ample control performance, while the integrated segmented LCD controller can drive as many as 256 segments and an integrated charge pump manages display contrast as the battery voltage changes. Core-independent blinking, blanking, and alternating-display animation can reduce visual distractions without continuous CPU activity. The XLP architecture and sleep current down to a few hundreds of nA also support long battery life between measurements. A practical design uses the LCD controller directly for the glass display, a dedicated sensor interface for temperature conversion, and a low-duty-cycle wake/sleep sequence to minimize average power.
Recomendado
Industrial Measurement Panels
The PIC24FJ64GL302-I/ML is suitable for compact industrial meter and control panels requiring local feedback without a display controller. The 16-bit PIC24 core and 16 MIPS throughput can supervise measurements and control logic, while 64 KB of ECC Flash provides room for application code and 8 KB of RAM supports working buffers. The segmented LCD subsystem handles up to 256 segments, with eight commons and 32 segment outputs, reducing external display-driver complexity. UART or SPI connectivity can connect sensors, while PWM, DMA, and the watchdog timer support periodic control and reliable background operation. The -I/ML industrial ordering configuration is appropriate for equipment expected to operate across industrial temperature conditions when the complete electrical limits are confirmed in the manufacturer datasheet.
Recomendado
Energy and Utility Meters
The PIC24FJ64GL302-I/ML can serve as the controller in a segmented-display energy meter or utility instrument. Its 64 KB ECC Flash supports metering algorithms, calibration tables, and communications firmware, while the 8 KB RAM provides working space for sampled values and display state. The integrated LCD controller supports as many as 256 segments, and autonomous blinking or blanking can indicate operating states without continuous MCU intervention. I2C, SPI, and UART interfaces allow connection to current sensors, memory, or a communications module. Because meters are often battery or energy-harvesting powered, the XLP feature set and sleep current down to a few hundreds of nA are central to the architecture. Validate the LCD duty cycle and peripheral activity because those factors dominate practical system-level energy consumption.
Recomendado
Portable Test Instruments
The PIC24FJ64GL302-I/ML is useful in handheld meters and portable test instruments that combine a segmented display with low-power operation. The 32 MHz CPU provides fast control and arithmetic performance, and the 16-bit architecture is well suited to instrument control loops that would be constrained by an 8-bit MCU. The LCD controller reduces the need for a separate glass driver, while the charge pump maintains contrast under changing supply conditions. UART and SPI interfaces support probes, external memory, calibration equipment, or a host computer. Core-independent LCD animation can highlight measurement states or alerts while the processor performs acquisition and calculations. The 28-QFN 6x6 mm package also permits a compact handheld layout, although exposed-pad soldering and thermal management must follow the manufacturer package drawing.
Recomendado
Segmented Display Control Modules
The PIC24FJ64GL302-I/ML can serve as the local controller in a reusable segmented-display module. Its integrated LCD engine supports up to 256 segments through eight commons and 32 segment outputs, while core-independent animation can perform alternating dual display, blinking, and blanking without requiring continuous CPU commands. A 32 MHz PIC24 core and 64 KB of ECC Flash leave substantial room for application logic, menu handling, and communications, while 8 KB of RAM supports display and control buffers. The I2C, SPI, and UART interfaces enable connection to sensors, host processors, and calibration equipment. Its XLP low-power capability is particularly advantageous for remote panels and battery-operated displays. Firmware should use the LCD peripheral's autonomous functions where possible to reduce wake-ups and extend service intervals.
Recomendado
Battery-Powered Sensor Nodes
The PIC24FJ64GL302-I/ML is appropriate for a local sensor node that periodically acquires data and presents status on a segmented LCD. I2C and SPI support common digital sensors and memories, UART provides a host or configuration link, and DMA can move data with limited processor involvement. The 8 KB RAM supports temporary acquisition and processing buffers, while 64 KB of ECC Flash accommodates protocol, filtering, and logging code. When the node must remain available for local status display, the LCD controller's autonomous animation reduces processor load. Alternatively, the display can be blanked during long sleep periods to lower energy use. The manufacturer's XLP power-management options and sleep current down to a few hundreds of nA help optimize duty-cycled operation, but sensor standby current and LCD segment loading must also be included in the final power budget.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC24FJ64GL302-I/ML — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC24FJ64GL302-E/ML | PIC24FJ64GL301-I/ML | PIC24FJ64GL303-I/ML | PIC24FJ64GA002-I/ML | PIC24FJ64GL300-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) |
| CPU Architecture | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
Diferenciadores clave
- Dedicated autonomous LCD animation in the GL302 (frente a PIC24FJ64GA002-I/ML)
- Integrated charge-pump contrast management (frente a PIC24FJ64GA002-I/ML)
- Low-power operating platform (frente a PIC24FJ64GA002-I/ML)
- Close same-package temperature-grade configuration (frente a PIC24FJ64GL302-E/ML)
Notas de diseño
Implement the 28-QFN 6x6 mm footprint directly from the Microchip manufacturer package drawing, including the exposed thermal pad, annular ring, solder mask, and paste pattern. Use a thermal-via array beneath the exposed pad if the drawing specifies it, and avoid placing copper-conflicting features under the pad unless the land pattern permits. Place required bypass capacitors close to their associated supply pins and provide a short, low-impedance ground return. Because the QFN has fine-pitch leads on all four sides, inspect the solder joints under magnification and verify assembly tolerances against the manufacturer drawing.
Build the low-power budget around the application's actual activity profile rather than the headline sleep current. The PIC24FJ64GL302-I/ML can reach sleep current down to a few hundreds of nA, but LCD segment loading, sensor standby current, regulator quiescent current, and the duration of each active interval may dominate the average consumption. Enable XLP sleep modes only after disabling or configuring active peripherals correctly. Use the manufacturer power-measurement conditions when comparing sleep states, and measure the assembled product to confirm that wake-up timing, display updates, and sensor sampling match the intended duty cycle.
Keep LCD segment and common routing away from switching power stages, high-current relays, inductors, and fast-edge clock signals. Route oscillator and communication signals over continuous ground references, and place decoupling capacitors adjacent to the relevant pins instead of consolidating all capacitors at a power-entry point. If the design includes external memory or a sensor on SPI, preserve short return paths and observe the peripheral timing requirements in the manufacturer datasheet. Continuous copper under the MCU is useful for thermal performance, but signal-routing priority and the prescribed exposed-pad pattern must be reconciled before layout release.
Do not substitute an MCU solely because its Flash and RAM ratings match. Verify the exact 28-QFN pin assignments, LCD common and segment mapping, oscillator configuration, peripheral multiplexing, operating-voltage limits, programming interface, and exposed-pad requirements. A change within the GL family can alter LCD animation features or peripheral availability even when the core and memory remain similar. For a redesign, preserve the original schematic, compare every signal in the manufacturer pin-description tables, and conduct firmware bring-up with the LCD disconnected or configured safely before attaching the final glass display.
Información de cumplimiento
The exact PIC24FJ64GL302-I/ML compliance status was not established from the manufacturer or distributor information. A separate web listing identifies PIC24FJ64GA002-I/ML as RoHS-compliant, but that result was not applied to the target ordering code.