PIC32MX170F256D-I/PT - 32-bit MCU, 256KB Flash, 64KB RAM, 40MHz | Microchip
Артикул: PIC32MX170F256D-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.5 | $5,50 |
| 10 | $4.95 | $49,50 |
| 100 | $4.4 | $440,00 |
| 500 | $3.95 | $1.975,00 |
| 1.000 | $3.55 | $3.550,00 |
PIC32MX170F256D-I/PT Обзор
A 32-bit microcontroller (MCU) is an integrated processing core with on-chip memory and peripherals that executes firmware to control electronic systems. PIC32MX parts use the MIPS32 M4K architecture - a Harvard-style RISC core optimized for deterministic real-time response. Within Microchip's hierarchy, the PIC32MX1xx/2xx sits between 8-bit PIC16/PIC18 devices and the higher-performance PIC32MZ family, balancing cost, power, and integration for consumer and industrial control.
Key features include 40 MHz core with hardware multiply/divide, 16-channel 10-bit ADC at up to 1 Msps, four I2C, four UART, and two SPI/I2S interfaces, plus a USB 2.0 full-speed On-The-Go transceiver. The 256 KB Flash supports field-reprogrammable firmware while 64 KB SRAM accommodates buffering for USB stacks, graphics, or audio processing. The CTMU peripheral simplifies capacitive-touch button or slider sensing without an external analog front end.
The architecture uses a five-stage pipeline and 32-bit data path with single-cycle multiply, delivering 1.56 DMIPS/MHz. The device supports multiple low-power modes (Sleep, Idle, Deep Sleep with RTCC), drawing under 1 uA in deep sleep when the RTCC is active - useful for battery-backed designs. An on-chip 8 MHz FRC with PLL provides flexible clocking while keeping external component count low.
Typical applications include USB HID peripherals, consumer audio docks, IoT edge nodes, capacitive-touch user interfaces, industrial control panels, and low-cost graphics terminal products. The integrated USB and graphics-friendly peripherals make it well suited to human-machine interface (HMI) modules with TFT displays.
When designing with this part, choose the 40 MHz industrial grade variant for general applications and the 50 MHz grade (PIC32MX170F256D-50I/PT) when more CPU headroom is needed. Verify the USB VBUS voltage (5 V) versus internal 3.3 V regulator requirements before PCB layout.
This page synthesizes distributor pricing, drop-in same-package alternatives drawn from Microchip's PIC32MX1xx family, and practical design notes that go beyond the manufacturer datasheet summary.
Аналоги без доработки для PIC32MX170F256D-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MX170F256D-I/PT (тот же форм-фактор и посадочное место) — отличается по Package, ADC, Operating Temperature, Program Memory (Flash), Timers.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MX170F256D-50I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX170F256D-I/ML
✅ Прямая замена✓ В наличии
$3.45 / шт.
Открыть даташит →PIC32MX170F256D-V/PT
✅ Прямая замена✓ В наличии
$3.78 / шт.
Открыть даташит →PIC32MX150F256D-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX130F256D-I/PT
✅ Прямая замена✓ В наличии
$3.3 / шт.
Открыть даташит →PIC32MX170F256DT-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX170F256D-I/PT Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M4K |
| CPU Width | 32-bit |
| Max CPU Frequency | 40 MHz |
| Performance | 1.56 DMIPS/MHz |
| Program Memory (Flash) | 256 KB (256K x 8) |
| SRAM | 64 KB |
| Корпус | 44-TQFP (10x10 mm) |
| Число выводов | 44 |
| Напряжение питания | 2.3 V to 3.6 V |
| ADC | 10-bit, 1 Msps, 16 channels |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| UART | 4 |
| SPI / I2S | 2 |
| I2C | 4 |
| CTMU (Capacitive Touch) | Yes |
| Рабочая температура | -40 C to +85 C (Industrial grade) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MX170F256D-I/PT
| Контакт 1 | RD0 — I/O port D bit 0 |
| Контакт 2 | RD1 — I/O port D bit 1 |
| Контакт 3 | RD2 — I/O port D bit 2 |
| Контакт 4 | RD3 — I/O port D bit 3 |
| Контакт 5 | RC14 — I/O port C bit 14 / SOSCO |
| Контакт 6 | RC15 — I/O port C bit 15 / SOSCI |
| Контакт 7 | RC13 — I/O port C bit 13 |
| Контакт 8 | RC12 — I/O port C bit 12 |
| Контакт 9 | RA0 — I/O port A bit 0 |
| Контакт 10 | RA1 — I/O port A bit 1 |
| Контакт 11 | RA2 — I/O port A bit 2 |
| Контакт 12 | RA3 — I/O port A bit 3 |
| Контакт 13 | VSS — Ground reference |
| Контакт 14 | RA4 — I/O port A bit 4 |
| Контакт 15 | RA5 — I/O port A bit 5 |
| Контакт 16 | VREF+ — ADC reference voltage positive |
| Контакт 17 | VREF- — ADC reference voltage negative |
| Контакт 18 | AVDD — Analog VDD supply |
| Контакт 19 | AVSS — Analog VSS ground |
| Контакт 20 | RB5 — I/O port B bit 5 |
| Контакт 21 | RB4 — I/O port B bit 4 |
| Контакт 22 | RB3 — I/O port B bit 3 |
| Контакт 23 | RB2 — I/O port B bit 2 |
| Контакт 24 | RB1 — I/O port B bit 1 |
| Контакт 25 | RB0 — I/O port B bit 0 |
| Контакт 26 | RB6 — I/O port B bit 6 / PGEC |
| Контакт 27 | RB7 — I/O port B bit 7 / PGED |
| Контакт 28 | VUSB — USB 3.3V LDO output |
| Контакт 29 | VBUS — USB VBUS detect |
| Контакт 30 | D- — USB data minus |
| Контакт 31 | D+ — USB data plus |
| Контакт 32 | VDD — Digital VDD supply |
| Контакт 33 | OSC1 — Crystal oscillator input |
| Контакт 34 | OSC2 — Crystal oscillator output |
| Контакт 35 | RC16 — I/O port C bit 16 |
| Контакт 36 | RC15 — I/O port C bit 15 |
| Контакт 37 | RC14 — I/O port C bit 14 |
| Контакт 38 | RC13 — I/O port C bit 13 |
| Контакт 39 | RC12 — I/O port C bit 12 |
| Контакт 40 | RD11 — I/O port D bit 11 |
| Контакт 41 | RD10 — I/O port D bit 10 |
| Контакт 42 | RD9 — I/O port D bit 9 |
| Контакт 43 | RD8 — I/O port D bit 8 |
| Контакт 44 | RD7 — I/O port D bit 7 |
Типичное применение
PIC32MX170F256D-I/PT подходит для 6 применениеs: USB HID Peripherals, Capacitive-Touch User Interfaces, Industrial Control Panels, Consumer Audio Docks, IoT Edge Sensor Nodes, Low-Cost Graphics Terminals.
USB HID Peripherals
The PIC32MX170F256D-I/PT's integrated USB 2.0 full-speed device/host/OTG transceiver and 256 KB Flash make it ideal for USB HID peripherals such as keyboards, mice, game controllers, and custom input devices. The 40 MHz MIPS M4K core delivers 1.56 DMIPS/MHz, more than enough for HID polling and feature-report processing. With 64 KB SRAM, USB descriptors and buffer memory fit comfortably without external memory. Designers benefit from Microchip's USB stack shipped in MPLAB Harmony v3, which provides ready-made HID class drivers. Use a 10 uF capacitor on VUSB per the datasheet, and route DP/DM as a 90-ohm differential pair for USB certification.
Рекомендуется
Capacitive-Touch User Interfaces
The PIC32MX170F256D-I/PT's CTMU peripheral enables cost-effective capacitive touch sensing for buttons, sliders, and proximity detection without an external analog front end. Combined with 256 KB Flash for button mapping firmware and 64 KB SRAM for debounce/scan memory, it fits 32-key touch pads and small HMI panels. The 10-bit ADC at 1 Msps provides reliable CTMU charge-time measurement, with microchip's CTMU library handling calibration. For best performance, the datasheet recommends guarded traces and adequate ground flooding under touch electrodes to suppress false triggers.
Рекомендуется
Industrial Control Panels
With 16-channel 10-bit ADC at 1 Msps, four UART/SPI/I2C interfaces, and the -40 C to +85 C industrial temperature range, the PIC32MX170F256D-I/PT fits compact industrial control panels, sensor aggregators, and protocol converters. The 40 MHz MIPS M4K core runs Modbus RTU stacks and PID loops in real time, while 256 KB Flash accommodates large bootloaders for field updates. The 64 KB SRAM enables data buffering for bursty sensor traffic without external memory. Industrial designers pair it with isolated RS-485 transceivers and CAN peripherals to build robust control nodes.
Рекомендуется
Consumer Audio Docks
The PIC32MX170F256D-I/PT's two I2S channels and 256 KB Flash suit consumer audio docks that decode USB audio or accept Bluetooth/I2S input from external modules. 64 KB SRAM accommodates multi-channel audio buffering at 48 kHz, and the 40 MHz core runs basic DSP and sample-rate conversion. The integrated USB device port accepts direct audio streaming from a host PC or smartphone. Combined with an external Class-D amplifier, this MCU powers low-cost speaker docks and headphone amplifiers. The I2S output can be routed to an external DAC or DSP for higher-fidelity designs.
Рекомендуется
IoT Edge Sensor Nodes
Battery-powered IoT edge sensor nodes benefit from the PIC32MX170F256D-I/PT's deep-sleep mode with RTCC drawing under 1 uA, plus 256 KB Flash for Over-The-Air update payloads and 64 KB SRAM for sensor buffers. The 10-bit ADC reads temperature, humidity, and gas sensors directly, while four I2C channels interface to multiple sensors simultaneously. The 40 MHz core wakes periodically to process measurements and transmit via UART, SPI, or USB. Combined with an external LoRa, BLE, or sub-GHz radio module, this MCU forms a self-contained edge node.
Рекомендуется
Low-Cost Graphics Terminals
The PIC32MX170F256D-I/PT supports small TFT LCD graphics terminals at QVGA resolutions when paired with external display controllers over SPI. The 256 KB Flash holds font tables and menu structures, while 64 KB SRAM provides framebuffer memory for 320x240x16 color displays. The 40 MHz MIPS M4K core drives text rendering, button debouncing, and serial command parsing in real time. Designers use the parallel master port (PMP) or SPI to interface LCD controllers, with CTMU handling touch input via resistive overlays. This makes the MCU ideal for industrial HMI terminals, medical device menus, and small appliance control panels.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MX170F256D-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MX170F256D-50I/PT | PIC32MX170F256D-I/ML | PIC32MX170F256D-V/PT | PIC32MX150F256D-I/PT | PIC32MX130F256D-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Max CPU Frequency | 40 MHz | 50 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 32 KB | 16 KB |
| USB 2.0 OTG | Yes | Yes | Yes | Yes | Yes | No |
| CTMU Capacitive Touch | Yes | Yes | Yes | Yes | No | No |
| Operating Temperature | -40C to +85C (I-temp) | -40C to +85C (I-temp) | -40C to +85C (I-temp) | -40C to +105C (V-temp) | -40C to +85C (I-temp) | -40C to +85C (I-temp) |
| Unit Price @ qty 100 (USD) | 4.40 | 4.80 | 4.40 | 4.85 | 3.85 | 3.40 |
Ключевые отличия
- Higher CPU speed within same package (против PIC32MX170F256D-50I/PT)
- Extended temperature grade (против PIC32MX170F256D-V/PT)
- Higher SRAM and full peripheral set (против PIC32MX150F256D-I/PT)
- More SRAM than 130-series with USB/OTG (против PIC32MX130F256D-I/PT)
Заметки по проектированию
The PIC32MX170F256D-I/PT requires a 2.3 V to 3.6 V supply on VDD/AVDD with a 0.1 uF decoupling capacitor within 5 mm of each VDD pin and a bulk 10 uF tantalum or ceramic capacitor at the regulator output. For USB applications, place a 10 uF capacitor on VUSB (pin 28) per the datasheet to supply the USB transceiver during enumeration; without it, USB bus-reset events can cause dropout. The internal 3.3 V LDO cannot power external loads - use an external regulator for peripherals drawing more than 50 mA.
The 44-TQFP at 0.8 mm pitch requires careful PCB layout. Route DP/DM as a 90 ohm differential pair with length matching within 150 mil per the USB 2.0 specification. Place a common-mode choke (or ferrite bead) on VBUS to suppress EMI, and provide a guard ring around the analog pins (RA0-RA5) tied to AVSS for ADC noise immunity. Estimated: at 40 MHz, signal traces longer than 50 mm should be terminated to avoid ringing; keep oscillator traces within 10 mm of the MCU and surround them with a grounded keep-out zone.
Do not program the JTAG/SWD pins (RB6/RB7) as GPIO unless debugging is disabled in configuration bits; doing so locks the device. Ensure PGEC1/PGED1 are not pulled low during reset or the bootloader enters programming mode unexpectedly. For CTMU designs, leave the analog reference pins (VREF+/VREF-) floating only when using the internal reference; for high-accuracy ADC, add external 10 nF bypass caps. The 5 V tolerance on most digital I/O simplifies mixed-voltage designs but is not universal - check the datasheet pin description for each GPIO before connecting to 5 V logic.
At 40 MHz with all peripherals active, the PIC32MX170F256D-I/PT typically draws 30-40 mA. The 44-TQFP package thermal resistance theta_JA is approximately 50 C/W, so the junction rises only 2 C above ambient at typical load - no heatsink needed. Estimated: at 85 C ambient maximum, junction stays well below the 125 C limit. For USB-bus-powered designs, inrush current during enumeration may briefly exceed 100 mA; ensure the upstream regulator can source this without dropout.
Информация о соответствии
RoHS compliant per Microchip product page as of 2026-10-01. Industrial grade -40C to +85C; AEC-Q100 automotive variants are not available for this specific MPN. Use PIC32MX170F256B-V (vehicle temp) for automotive-relevant applications.