PIC32MZ0512EFE064-E/PT - 32-bit 200MHz MCU 512KB Flash | Microchip
부품 번호: PIC32MZ0512EFE064-E/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $11.2 | $11.20 |
| 10 | $10.05 | $100.50 |
| 100 | $8.95 | $895.00 |
| 500 | $7.85 | $3,925.00 |
| 1,000 | $6.95 | $6,950.00 |
PIC32MZ0512EFE064-E/PT 개요
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces) into one package. Within the broader taxonomy, 32-bit MCUs sit above 8-bit and 16-bit MCUs in performance, below microprocessors (MPUs) that lack integrated peripherals, and within the semiconductor hierarchy they belong to the microcontroller family of integrated circuits. The PIC32MZ EF family specifically targets connectivity-rich applications, combining DSP extensions, dual-panel live-update Flash, and high-speed communication peripherals.
Key features of the PIC32MZ0512EFE064-E/PT include four 64-bit accumulators and single-cycle MAC operations that accelerate DSP routines, IEEE 754-compliant hardware floating-point, dual-panel Flash supporting live firmware updates without downtime, and 24 channels of 12-bit ADC with dedicated DMA. Connectivity is delivered through HS USB, Ethernet, CAN, multiple UART/SPI/I2C ports, and dedicated audio/graphics peripherals (per Microchip datasheet). The 64-pin TQFP footprint enables easy hand-soldering and prototype rework compared to fine-pitch QFN alternatives.
Typical applications include industrial automation controllers, automotive body and HMI modules, IoT gateways with Ethernet/USB, motor control drive boards, and graphics-driven human-machine interfaces. The AEC-Q100 qualification broadens deployment into under-hood and other automotive-grade designs where temperature swing and reliability demands exceed consumer-grade thresholds.
When designing with this device, allocate sufficient decoupling (typically 100 nF + bulk capacitors per rail pair) and follow Microchip's trace-routing guidance for the Ethernet and USB differential pairs to maintain signal-integrity compliance. The Harmony software framework and MPLAB development environment accelerate peripheral configuration and code generation.
드롭인 대체품: PIC32MZ0512EFE064-E/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ0512EFE064-E/PT (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, Core Architecture, USB, DMA Channels.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ0512EFE064-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MZ0512EFE064-E/MR
✅ 드롭인✓ 재고 있음
$6.86 / 개
데이터시트 보기 →PIC32MZ0512EFE064T-E/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX470F512LT-120/PT
✅ 드롭인✓ 재고 있음
$4.1 / 개
데이터시트 보기 →PIC32MX795F512HT-80V/PT
✅ 드롭인✓ 재고 있음
$7.1 / 개
데이터시트 보기 →PIC32MX775F512HT-80V/PT
✅ 드롭인✓ 재고 있음
$8.1 / 개
데이터시트 보기 →PIC32MZ0512EFE064-E/PT 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M-Class Warrior (32-bit) with FPU |
| Maximum CPU Frequency | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| Program Memory (Flash) | 512 KB |
| SRAM | 128 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| 동작 온도 범위 | -40C to +125C (Extended, -E suffix) |
| 패키지 | 64-pin TQFP (10x10 mm, PT suffix) |
| ADC | 24 channels, 12-bit |
| DMA Channels | 12 (dedicated) |
| Communication Interfaces | HS USB, Ethernet, CAN, UART, SPI, I2C |
| Floating-Point Unit | IEEE 754-compliant hardware FPU |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC |
| Flash Architecture | Dual-panel Flash for live update |
| Automotive Qualification | AEC-Q100 |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
PIC32MZ0512EFE064-E/PT 핀 구성
| 핀 1 | SOCKET — [DATA_NEEDED: detailed pin 1 function per Microchip datasheet pin table] |
| 핀 2 | I/O — [DATA_NEEDED: pin 2 function] |
| 핀 3 | I/O — [DATA_NEEDED: pin 3 function] |
| 핀 4 | I/O — [DATA_NEEDED: pin 4 function] |
| 핀 5 | I/O — [DATA_NEEDED: pin 5 function] |
| 핀 6 | I/O — [DATA_NEEDED: pin 6 function] |
| 핀 7 | I/O — [DATA_NEEDED: pin 7 function] |
| 핀 8 | I/O — [DATA_NEEDED: pin 8 function] |
| 핀 9 | I/O — [DATA_NEEDED: pin 9 function] |
| 핀 10 | I/O — [DATA_NEEDED: pin 10 function] |
| 핀 11 | I/O — [DATA_NEEDED: pin 11 function] |
| 핀 12 | I/O — [DATA_NEEDED: pin 12 function] |
| 핀 13 | I/O — [DATA_NEEDED: pin 13 function] |
| 핀 14 | I/O — [DATA_NEEDED: pin 14 function] |
| 핀 15 | I/O — [DATA_NEEDED: pin 15 function] |
| 핀 16 | I/O — [DATA_NEEDED: pin 16 function] |
| 핀 17 | I/O — [DATA_NEEDED: pin 17 function] |
| 핀 18 | I/O — [DATA_NEEDED: pin 18 function] |
| 핀 19 | I/O — [DATA_NEEDED: pin 19 function] |
| 핀 20 | I/O — [DATA_NEEDED: pin 20 function] |
| 핀 21 | I/O — [DATA_NEEDED: pin 21 function] |
| 핀 22 | I/O — [DATA_NEEDED: pin 22 function] |
| 핀 23 | I/O — [DATA_NEEDED: pin 23 function] |
| 핀 24 | I/O — [DATA_NEEDED: pin 24 function] |
| 핀 25 | I/O — [DATA_NEEDED: pin 25 function] |
| 핀 26 | I/O — [DATA_NEEDED: pin 26 function] |
| 핀 27 | I/O — [DATA_NEEDED: pin 27 function] |
| 핀 28 | I/O — [DATA_NEEDED: pin 28 function] |
| 핀 29 | I/O — [DATA_NEEDED: pin 29 function] |
| 핀 30 | I/O — [DATA_NEEDED: pin 30 function] |
| 핀 31 | I/O — [DATA_NEEDED: pin 31 function] |
| 핀 32 | I/O — [DATA_NEEDED: pin 32 function] |
| 핀 33 | I/O — [DATA_NEEDED: pin 33 function] |
| 핀 34 | I/O — [DATA_NEEDED: pin 34 function] |
| 핀 35 | I/O — [DATA_NEEDED: pin 35 function] |
| 핀 36 | I/O — [DATA_NEEDED: pin 36 function] |
| 핀 37 | I/O — [DATA_NEEDED: pin 37 function] |
| 핀 38 | I/O — [DATA_NEEDED: pin 38 function] |
| 핀 39 | I/O — [DATA_NEEDED: pin 39 function] |
| 핀 40 | I/O — [DATA_NEEDED: pin 40 function] |
| 핀 41 | I/O — [DATA_NEEDED: pin 41 function] |
| 핀 42 | I/O — [DATA_NEEDED: pin 42 function] |
| 핀 43 | I/O — [DATA_NEEDED: pin 43 function] |
| 핀 44 | I/O — [DATA_NEEDED: pin 44 function] |
| 핀 45 | I/O — [DATA_NEEDED: pin 45 function] |
| 핀 46 | I/O — [DATA_NEEDED: pin 46 function] |
| 핀 47 | I/O — [DATA_NEEDED: pin 47 function] |
| 핀 48 | I/O — [DATA_NEEDED: pin 48 function] |
| 핀 49 | I/O — [DATA_NEEDED: pin 49 function] |
| 핀 50 | I/O — [DATA_NEEDED: pin 50 function] |
| 핀 51 | I/O — [DATA_NEEDED: pin 51 function] |
| 핀 52 | I/O — [DATA_NEEDED: pin 52 function] |
| 핀 53 | I/O — [DATA_NEEDED: pin 53 function] |
| 핀 54 | I/O — [DATA_NEEDED: pin 54 function] |
| 핀 55 | I/O — [DATA_NEEDED: pin 55 function] |
| 핀 56 | I/O — [DATA_NEEDED: pin 56 function] |
| 핀 57 | I/O — [DATA_NEEDED: pin 57 function] |
| 핀 58 | I/O — [DATA_NEEDED: pin 58 function] |
| 핀 59 | I/O — [DATA_NEEDED: pin 59 function] |
| 핀 60 | I/O — [DATA_NEEDED: pin 60 function] |
| 핀 61 | I/O — [DATA_NEEDED: pin 61 function] |
| 핀 62 | I/O — [DATA_NEEDED: pin 62 function] |
| 핀 63 | I/O — [DATA_NEEDED: pin 63 function] |
| 핀 64 | I/O — [DATA_NEEDED: pin 64 function] |
일반적인 애플리케이션
PIC32MZ0512EFE064-E/PT 적합 용도: 6 애플리케이션s: Industrial Automation Controllers, Automotive Body and HMI Modules, IoT Edge Gateways with Ethernet/USB, Graphics-Driven Human-Machine Interfaces, Motor Control Drive Boards, Audio Processing and USB Audio Devices.
Industrial Automation Controllers
The PIC32MZ0512EFE064-E/PT fits industrial PLC and motion-control platforms with its 200 MHz MIPS32 core (330 DMIPS) and integrated FPU executing single-cycle MAC operations on four 64-bit accumulators. The 24-channel 12-bit ADC plus 12 dedicated DMA channels enable simultaneous sampling of multi-axis motor feedback without CPU intervention. AEC-Q100 qualification and the -40C to +125C extended temperature range support cabinet-free deployment near drives and motors. Pair with PIC32MK motor-control MCUs or external gate drivers for high-current three-phase inverter stages.
추천
Automotive Body and HMI Modules
The PIC32MZ0512EFE064-E/PT's AEC-Q100 grade and -40C to +125C temperature range make it well-suited for automotive body controllers, instrument clusters, and infotainment HMI subsystems. Its 330 DMIPS performance and 128 KB SRAM drive graphics-rich TFT displays while leaving headroom for CAN/LIN stack and diagnostic processing. HS USB and Ethernet peripherals support diagnostic interfaces and software reflash workflows. Dual-panel live-update Flash enables OTA-style firmware replacement without vehicle downtime.
추천
IoT Edge Gateways with Ethernet/USB
The PIC32MZ0512EFE064-E/PT integrates HS USB 2.0, 10/100 Ethernet MAC, and multiple UART/SPI/I2C ports needed to aggregate sensor data and forward to the cloud. The 200 MHz core runs TCP/IP stacks (e.g., Microchip's TCP/IP Lite or third-party lwIP) with FPU-assisted JSON/MQTT serialization. 512 KB Flash holds gateway firmware plus TLS certificates; 128 KB SRAM buffers multi-protocol traffic. Pair with external PHYs (LAN8720) and Wi-Fi/BLE modules for flexible connectivity.
추천
Graphics-Driven Human-Machine Interfaces
The PIC32MZ0512EFE064-E/PT drives TFT LCD panels up to WXGA resolution with hardware graphics acceleration, parallel RGB interface, and dedicated timing controllers. The 330 DMIPS core plus 128 KB SRAM run Microchip's MPLAB Harmony Graphics Suite without dropping frames at 60 Hz. USB HID touch controllers interface to capacitive overlays; QSPI/SPI ports load fonts and bitmaps from external NOR Flash. The 64-pin TQFP provides enough I/O for display data plus keypad and LED indicators.
추천
Motor Control Drive Boards
The PIC32MZ0512EFE064-E/PT's DSP extensions (single-cycle MAC, four 64-bit accumulators) execute Field-Oriented Control (FOC) loops for BLDC and PMSM motors within microsecond cycle times. Up to 24 ADC channels sample phase currents, back-EMF, and resolver feedback simultaneously via DMA, offloading the CPU. PWM outputs drive external three-phase gate drivers, while CAN/Ethernet/USB provide supervisory connectivity. AEC-Q100 grade suits traction and pump motor designs.
추천
Audio Processing and USB Audio Devices
The PIC32MZ0512EFE064-E/PT's HS USB 2.0 and DSP-extended MIPS32 core process multi-channel audio streams (USB Audio Class 1/2, S/PDIF, I2S) at low latency. The FPU accelerates biquad filters, mixing, and dynamics processing without integer overflow risk. 128 KB SRAM holds audio buffers for USB isochronous endpoints, while 512 KB Flash stores firmware plus effect presets. Pair with external CODECs for line-level or headphone outputs.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ0512EFE064-E/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ0512EFE064-I/PT | PIC32MZ0512EFE064-E/MR | PIC32MZ0512EFE064T-E/PT | PIC32MX470F512LT-120/PT | PIC32MX795F512HT-80V/PT |
|---|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm, PT) | 64-pin TQFP (10x10 mm) - same | 64-pin QFN (MR) - different footprint | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP - same | 64-pin TQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 200 MHz | 200 MHz | 180 MHz | 120 MHz | 80 MHz | |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | |
| FPU | Yes (IEEE 754) | Yes | Yes | No | No | |
| Ethernet | Yes (MAC, external PHY) | Yes | No | Yes | ||
| HS USB | Yes (USB 2.0 High-Speed) | Yes | No (Full-Speed only) | No (Full-Speed only) | ||
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (V grade) | |
| AEC-Q100 | Yes | No | Yes | No | No |
주요 차별점
- Highest CPU performance in 64-pin TQFP PIC32 family (vs PIC32MX795F512HT-80V/PT)
- AEC-Q100 automotive qualification vs industrial-only -I variant (vs PIC32MZ0512EFE064-I/PT)
- Hardware FPU and DSP extensions not present in PIC32MX series (vs PIC32MX470F512LT-120/PT)
설계 노트
Place a 100 nF ceramic decoupling capacitor as close as possible to every VDD/VSS pair on the PIC32MZ0512EFE064-E/PT, plus a 10 uF bulk capacitor on each major power rail (core, I/O, ADC reference). Estimated: with 200 MHz operation the core current can reach 80-100 mA peak, so 4-layer PCB with a continuous ground plane is strongly recommended. Follow Microchip's Power Supply Sequencing section in the family reference manual to avoid latch-up during hot-plug events.
Route the Ethernet differential pairs (ETH_RDP/ETH_RDN and ETH_TDP/ETH_TDN) as a 100-ohm differential microstrip with matched length to within 100 mils (estimated per typical PHY datasheets). Keep the 50 MHz RMII reference clock trace short and guarded by ground. The HS USB D+/D- pair requires 90-ohm differential impedance. Place the external PHY (e.g., LAN8720) within 25 mm of the MCU to avoid signal-integrity issues.
The 64-pin TQFP package dissipates power through the die paddle-less leads. Estimated: at 200 MHz core speed and 3.3 V supply, the device draws approximately 60-80 mA (200-265 mW). Junction-to-ambient thermal resistance is approximately 60-70 C/W on a standard 4-layer JEDEC test board, so in free air at 25C ambient the junction temperature rises about 12-18 C above ambient. At +125C ambient the junction remains well below the 150C maximum, but verify with your specific PCB layout.
Do not enable HS USB without a stable 48 MHz PLL output; jitter above the USB 2.0 specification (per USB-IF compliance) will fail certification. When using the ADC, ensure the band-gap reference is enabled for at least 1 ms before conversion start for accurate readings. The dual-panel Flash requires specific erase-then-write sequences; consult section 7 of the family reference manual before implementing live-update firmware workflows.
Use PPS (Peripheral Pin Select) registers to remap peripherals onto less-noisy I/O pins rather than forcing default assignments, especially when high-current switching (PWM) and analog inputs (ADC) coexist. Estimated: switching noise from unshielded PWM traces within 5 mm of ADC traces can inject 5-10 LSB error; route analog inputs on an inner layer with ground shielding.
규정 준수 정보
AEC-Q100 qualified per -E suffix and datasheets.com parametric records (as of 2026-10-04). RoHS and REACH compliance inferred from Microchip's standard product declarations; halogen-free status not explicitly stated in the verified web data and left as 'unknown' per data authenticity rules.
