S912XEQ512F0MALR - 16-bit 50MHz 512KB MCU | NXP
Артикул: S912XEQ512F0MALR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
S912XEQ512F0MALR Обзор
A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripheral interfaces on one die. The HCS12X/S12X family sits within the broader 16-bit MCU class, alongside architectures such as MSP430 and AVR, and serves as the complete control element in automotive and industrial embedded systems where flash density, EMC robustness, and mixed-signal integration matter more than raw 32-bit compute throughput.
Key features of the S912XEQ512F0MALR include the XGATE co-processor, a second programmable RISC engine that offloads interrupt handling and I/O tasks to build virtual peripherals and boost overall system performance; a flexible, programmable hardware-emulated EEPROM block for parameter storage without external memory; and a memory protection unit (MPU) with supervisor/user modes for system integrity in safety-relevant designs. The device integrates a 12-bit ADC with 3 microsecond conversion time, an enhanced capture timer (ECT), a periodic interrupt timer (PIT), and a real-time interrupt (RTI).
On the connectivity side, the MCU supports up to four CAN interfaces, making it well suited to in-vehicle networking, plus six SCI (UART) modules, three SPI modules, and I2C for peripheral expansion. The architecture operates across 1.8V, 2.8V, and 5V domains with the S12X CPU implemented in CMOS, delivering deterministic 16-bit real-time control with the EMC behavior expected of a body/chassis/powertrain-class automotive part.
Typical applications include automotive body control modules, gateway nodes aggregating multiple CAN buses, HVAC and climate controllers, electric power steering assist logic, and industrial automation controllers that require flash density up to 512KB, four CAN channels, and -40C to +125C grade rating.
When designing with this MCU, budget the ADC conversion time of 3 microseconds per channel into sampling schedules and place the hardware-emulated EEPROM wear-levelling driver so that emulated EEPROM cycles do not fragment the 512KB flash array. Ensure the 5V supply is decoupled per NXP reference designs and that the MPU region map is configured before enabling user-mode execution.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для S912XEQ512F0MALR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с S912XEQ512F0MALR (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Flash Memory, Core Processor, EEPROM.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
S912XEQ512F1MALR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
S912XET512BMAGR
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$6.6 / шт.
Открыть даташит →S912XET512J2VAGR
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1 / шт.
Открыть даташит →MC9S12XEQ384CAG
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →S912XEG384J2VAL
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$17.8 / шт.
Открыть даташит →MC9S12XDT512MAA
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →S912XET256J2VAG
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →S912XEQ512F0MALR Максимальные параметры и электрические характеристики
| Core Processor | S12X (HCS12X) 16-bit |
| Core Size | 16-bit |
| Bus Speed | 50 MHz |
| Program Memory | 512KB (512K x 8) Flash |
| RAM Size | 32KB |
| EEPROM | Hardware-emulated EEPROM (programmable, flexible) |
| Co-processor | XGATE RISC co-processor |
| Memory Protection | MPU with supervisor/user modes |
| ADC Resolution | 12-bit |
| ADC Conversion Time | 3 us |
| CAN Channels | Up to 4 |
| SCI (UART) Channels | 6 |
| SPI Channels | 3 |
| I2C | Yes |
| Timers | Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real Time Interrupt (RTI), 12 timer modules |
| Supply Voltage Domains | 1.8V / 2.8V / 5V |
| Рабочая температура | -40C to +125C |
| Корпус | 112-LQFP (20x20 mm) |
| Тип монтажа | Surface Mount |
| Qualification | Automotive Qualified |
| Packaging | Tape & Reel (R suffix) |
Руководство по цоколевке S912XEQ512F0MALR в корпусе 112-lqfp (20x20 mm)
Цоколевка для S912XEQ512F0MALR (корпус 112-lqfp (20x20 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для S912XEQ512F0MALR.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
S912XEQ512F0MALR подходит для 6 применениеs: Automotive Body Control Module (BCM), In-Vehicle CAN Gateway Node, HVAC and Climate Control, Industrial Automation Controllers, Electric Power Steering (EPS) Assist Logic, Telematics and Sensor Data Loggers.
Automotive Body Control Module (BCM)
The S912XEQ512F0MALR fits body control modules because it combines automotive qualification, a -40C to +125C operating range, and 512KB of flash for the large code bases BCM firmware typically demands. Four CAN channels allow the module to bridge the comfort, powertrain, and diagnostic bus segments, while the XGATE co-processor services CAN frames and lamp/load PWM timing off the main S12X core, keeping worst-case interrupt latency low. The hardware-emulated EEPROM stores customer configuration, fault codes, and wear data without external memory. Placed on a standard 5V supply with NXP reference-design decoupling, the 12-bit ADC (3 us conversion) reads switch packs, potentiometers, and current-sense channels directly, reducing external component count versus a discrete signal-conditioning front end.
Рекомендуется
In-Vehicle CAN Gateway Node
Gateway modules that translate and filter traffic between multiple CAN buses are a natural fit for this MCU: the S912XEQ512F0MALR provides up to four CAN interfaces on one die, so two to four bus segments terminate without external CAN controllers. The 50 MHz S12X core plus XGATE co-processor split the workload, with XGATE performing frame filtering, identifier translation, and buffering while the main CPU runs application logic, meeting deterministic forwarding deadlines. The MPU with supervisor/user modes partitions gateway protocol code from application code, supporting integrity requirements in automotive software processes. With 512KB flash there is headroom for diagnostic stacks (UDS), multiple network-management implementations, and OTA-style update scaffolding within a single -40C to +125C qualified 112-LQFP device.
Рекомендуется
HVAC and Climate Control
Automotive HVAC controllers require stepper-motor drive sequencing for blend-air doors, blower PWM control, temperature sensing, and CAN communication, all of which map onto the S912XEQ512F0MALR peripheral set. The enhanced capture timer (ECT) generates and captures precise timing channels for door-position feedback potentiometers, the periodic interrupt timer (PIT) schedules control-loop sampling, and the 12-bit ADC with 3 microsecond conversion digitizes NTC temperature sensors across multiple zones. XGATE offloads stepper ramp generation so the main core handles occupant-demand control algorithms. Automotive qualification and the -40C to +125C range cover the under-dash environment, and 512KB flash accommodates calibration tables and self-diagnostic routines without external memory.
Рекомендуется
Industrial Automation Controllers
In factory automation, the S912XEQ512F0MALR serves as a real-time 16-bit controller where deterministic I/O outweighs 32-bit compute. The 50 MHz S12X bus executes control loops with predictable cycle times, three SPI modules interface with ADCs, encoders, and displays in parallel, six SCI (UART) modules connect panels and legacy field devices, and I2C reaches configurable sensors. Up to four CAN channels support CANopen networks common in industrial drives and I/O modules. The hardware-emulated EEPROM stores parameter sets and cycle counters with wear levelling, and the MPU with supervisor/user modes isolates safety logic. Operating from a 5V rail with a 12-bit ADC sampling at 3 microseconds per conversion, the device consolidates mixed-signal acquisition and fieldbus communication in one -40C to +125C qualified component.
Рекомендуется
Electric Power Steering (EPS) Assist Logic
EPS electronic control units require torque-sensor acquisition, motor-current monitoring, fast fault detection, and dual CAN reporting, tasks the S912XEQ512F0MALR handles with its 3 microsecond 12-bit ADC and enhanced capture timer. The XGATE co-processor services high-rate ADC interrupts and executes current-loop housekeeping while the main S12X core computes assist strategies, reducing jitter in torque-signal processing. The MPU with supervisor/user modes supports the software partitioning that functional-safety development processes expect, and the -40C to +125C automotive qualification covers the engine-bay-adjacent thermal environment. Hardware-emulated EEPROM stores end-of-line calibration and steering-angle learning data across power cycles without external NVM, and four CAN channels allow redundant reporting paths in dual-bus chassis architectures.
Рекомендуется
Telematics and Sensor Data Loggers
Fleet telematics units and vehicle data loggers benefit from the S912XEQ512F0MALR combination of four CAN channels for capturing multi-bus traffic, six SCI ports for GPS receivers and cellular modems, and 512KB flash for buffered event storage. The XGATE co-processor time-stamps and filters CAN frames in hardware-adjacent processing so no bus traffic is lost during communication bursts, while the periodic interrupt timer provides a stable timebase for logging intervals. The 12-bit ADC (3 us conversion) digitizes auxiliary analog sensors such as battery voltage, temperature, and accelerometers at low external cost. Hardware-emulated EEPROM retains configuration and black-box fault snapshots through power loss, all within a -40C to +125C qualified 112-LQFP footprint.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для S912XEQ512F0MALR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | S912XEQ512F1MALR | S912XET512BMAGR | MC9S12XEQ384CAG | S912XEG384J2VAL |
|---|---|---|---|---|---|
| Package | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Program Flash | 512KB | 512KB | 512KB | 384KB | 384KB |
| Core / Bus Speed | S12X 16-bit @ 50 MHz | S12X 16-bit @ 50 MHz | S12X 16-bit @ 50 MHz | S12X 16-bit @ 50 MHz | S12X 16-bit @ 50 MHz |
| XGATE Co-processor | Yes | Yes | Yes | Yes | Yes |
| Automotive Qualification | Yes | Yes | Yes | Yes | Yes |
| Packaging (order code) | Tape & Reel (R suffix) | Tape & Reel (R suffix) | Tape & Reel (R suffix) | Tray | Tray |
Ключевые отличия
- Maximum flash density in the same footprint (против MC9S12XEQ384CAG)
- XGATE co-processor for virtual peripherals (против MC9S12XDT512MAA)
- Full memory protection for safety-oriented software (против S912XET256J2VAG)
Заметки по проектированию
The S912XEQ512F0MALR operates from a 5V main supply (with 1.8V/2.8V internal/IO domains per family data). Follow the S12XE family datasheet power-up sequencing: stabilize VDDX/VDDR before releasing reset, and decouple each supply pin pair with 100 nF ceramic capacitors placed within 2 mm of the pin plus one bulk 10 uF per supply domain. Estimated: with a typical 50 mA core-peripheral budget at 5V, dissipation is roughly 0.25 W - well within the 112-LQFP thermal capability without heatsinking, but verify against your actual I/O loading.
The 112-LQFP (20x20 mm, 0.5 mm pitch) requires careful fanout: route the four CAN RX/TX pairs as short matched traces to their transceivers with common-mode chokes per NXP CAN application notes. Use a solid ground plane under the MCU and avoid running switching traces (motor drivers, relays) beneath the ADC input routing. Keep the crystal/oscillator loop compact with guard grounding. Place the 0.5 mm-pitch LQFP land pattern per IPC-7351 recommendations and inspect solder joints with X-ray or AOI given the fine pitch.
Three frequent mistakes with S12XE parts: (1) treating the hardware-emulated EEPROM as unlimited-wear flash - implement the NXP emulated-EEPROM driver with wear levelling and budget erase cycles; (2) assuming all 112 pins are fixed-function - most pins are multiplexed, so verify the pin-mux table before routing; (3) migrating firmware between F0/F1 or EQ/ET/EG variants without rechecking the ordering-variant tables (temperature grade, speed option, peripheral set). Also configure the MPU region map before switching to user mode, or privileged accesses will trap unexpectedly.
The 50 MHz bus makes rise-time-sensitive nodes (CAN, SCK up to several MHz, external bus if enabled) susceptible to ringing on long traces. Keep SPI clock lines under 10 cm or series-terminate near the driver, and route CAN pairs as 120-ohm differential impedance. Stagger ADC channel sampling across the 3 us conversion windows so return currents from one conversion do not corrupt a neighboring channel reading on the shared sample capacitor.
Информация о соответствии
Product data explicitly states Automotive Qualified with -40/+125degC rating, consistent with AEC-Q100 Grade 1 temperature range; formal AEC-Q100 certificate and RoHS/REACH declarations should be obtained from NXP official documentation.
