SAK-TC364DP-64F300F - AURIX TC36x Dual-Core 300MHz MCU | Infineon
Артикул: SAK-TC364DP-64F300F ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $24.5 | $24,50 |
| 10 | $22.1 | $221,00 |
| 100 | $19.8 | $1.980,00 |
| 500 | $17.45 | $8.725,00 |
| 1.000 | $15.2 | $15.200,00 |
SAK-TC364DP-64F300F Обзор
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and interrupt control on one die. In the automotive electronics hierarchy, an automotive MCU sits above general-purpose MCUs in functional-safety requirements because it must meet ASIL ratings defined by ISO 26262. The AURIX TC36xDP family is part of Infineon's second-generation AURIX family (TC3xx) and is positioned between the smaller TC33x and the larger TC37x/TC38x/TC39x devices, balancing performance, memory, and package cost for chassis and body-domain ECUs.
Key features of the SAK-TC364DP-64F300F include a hardware ECC unit on flash, built-in general-purpose timer (GPT) modules, integrated LDO voltage regulators, and a dedicated Peripheral Control Processor (PCP) for offloading interrupt-driven tasks from the main TriCore cores. The device supports single-voltage supply operation, multiple wake-up sources, and Infineon’s HSM (Hardware Security Module) for secure boot and cryptographic acceleration. Typical power consumption is below 2 W across the full temperature range.
The TC36xDP is built on a 65 nm embedded flash technology and includes a lockstep checker core that runs in parallel with the main core for diagnostic coverage. This dual-core lockstep architecture, combined with a Safety Management Unit (SMU) and a redundant Watchdog Timer, provides the systematic and random fault detection required for ASIL-D applications. The integrated DMA engine has multiple channels for high-throughput data movement between peripherals and memory.
Typical applications include automotive chassis control (brake, steering, suspension), electric power steering (EPS), airbag ECUs, battery management systems for xEV, and zone/body domain controllers. The device's 100 Mbit Ethernet MAC makes it suitable for in-vehicle networking backbones, while the multiple CAN-FD channels support traditional automotive bus architectures. The integrated HSM also supports secure OTA (over-the-air) firmware update requirements.
When designing with the TC36xDP, ensure that the lockstep mode is properly configured before ASIL-D safety claims can be made. Decoupling capacitors must be placed close to all VDD pins, and the external crystal or clock source must meet the jitter requirements specified in the Infineon TC3xx user manual for Ethernet and CAN-FD communication. JTAG/DAP access pins should be routed to a secure test header for production programming.
This page synthesizes distributor pricing, AURIX family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate second-source options for safety-critical automotive designs.
Аналоги без доработки для SAK-TC364DP-64F300F — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с SAK-TC364DP-64F300F (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Ethernet, Number of Cores, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
SAK-TC364DP-64F300W
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TC364DP64F300FAAKXUMA1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SAK-TC377DP-64F300S
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
SAK-TC387QP-160F300S
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$25.95 / шт.
Открыть даташит →SAK-TC364DP-64F200F
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
SAK-TC336DP-64F300S
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
SAK-TC364DP-64F300F Максимальные параметры и электрические характеристики
| Core Architecture | TriCore v1.6.2 (32-bit) |
| Number of Cores | 2 (1 main + 1 checker in lockstep) |
| Максимальная тактовая частота | 300 MHz |
| Program Flash | 4 MB |
| SRAM | 672 KB |
| Напряжение питания | 3.3 V / 5 V (single-voltage operation) |
| Functional Safety | ISO 26262 ASIL-D capable |
| Automotive Grade | AEC-Q100 qualified |
| Ethernet | 100 Mbit (MII/RMII) |
| CAN-FD Ports | Multiple (per TC36xDP configuration) |
| LIN Channels | Multiple |
| Hardware Security Module | Yes (EVITA-Full) |
| Hardware ECC | Yes (Flash + RAM) |
| Integrated LDO | Yes |
| Typical Power Consumption | < 2 W |
| Корпус | PG-LQFP-144-22 (TQFP-144) |
| Рабочая температура | -40 C to +125 C (automotive Grade 1) |
| Статус RoHS | Compliant |
Конфигурация выводов SAK-TC364DP-64F300F
| Контакт 1 | VEXT — External voltage supply (5V or 3.3V) |
| Контакт 2 | P00.0 — GPIO / general-purpose I/O |
| Контакт 3 | P00.1 — GPIO / general-purpose I/O |
| Контакт 4 | P00.2 — GPIO / general-purpose I/O |
| Контакт 5 | P00.3 — GPIO / general-purpose I/O |
| Контакт 6 | P00.4 — GPIO / general-purpose I/O |
| Контакт 7 | P00.5 — GPIO / general-purpose I/O |
| Контакт 8 | P00.6 — GPIO / general-purpose I/O |
| Контакт 9 | P00.7 — GPIO / general-purpose I/O |
| Контакт 10 | P00.8 — GPIO / general-purpose I/O |
| Контакт 11 | VSS — Ground reference |
| Контакт 12 | P00.9 — GPIO / general-purpose I/O |
| Контакт 13 | P00.10 — GPIO / general-purpose I/O |
| Контакт 14 | P00.11 — GPIO / general-purpose I/O |
| Контакт 15 | P00.12 — GPIO / general-purpose I/O |
| Контакт 16 | P00.13 — GPIO / general-purpose I/O |
| Контакт 17 | P00.14 — GPIO / general-purpose I/O |
| Контакт 18 | P00.15 — GPIO / general-purpose I/O |
| Контакт 19 | P33.0 — GPIO / wake-up capable |
| Контакт 20 | P33.1 — GPIO / wake-up capable |
| Контакт 21 | P33.2 — GPIO / wake-up capable |
| Контакт 22 | P33.3 — GPIO / wake-up capable |
| Контакт 23 | P33.4 — GPIO / wake-up capable |
| Контакт 24 | P33.5 — GPIO / wake-up capable |
| Контакт 25 | VSS — Ground reference |
| Контакт 26 | XTAL1 — External crystal oscillator input |
| Контакт 27 | XTAL2 — External crystal oscillator output |
| Контакт 28 | VDD — Core voltage supply (1.3V internal LDO) |
| Контакт 29 | P33.6 — GPIO / wake-up capable |
| Контакт 30 | P33.7 — GPIO / wake-up capable |
| Контакт 31 | P33.8 — GPIO / wake-up capable |
| Контакт 32 | P33.9 — GPIO / wake-up capable |
| Контакт 33 | P33.10 — GPIO / wake-up capable |
| Контакт 34 | P33.11 — GPIO / wake-up capable |
| Контакт 35 | P33.12 — GPIO / wake-up capable |
| Контакт 36 | VSS — Ground reference |
| Контакт 37 | CAN0_TX — CAN-FD channel 0 transmit |
| Контакт 38 | CAN0_RX — CAN-FD channel 0 receive |
| Контакт 39 | CAN1_TX — CAN-FD channel 1 transmit |
| Контакт 40 | CAN1_RX — CAN-FD channel 1 receive |
| Контакт 41 | P15.0 — GPIO / analog input capable |
| Контакт 42 | P15.1 — GPIO / analog input capable |
| Контакт 43 | P15.2 — GPIO / analog input capable |
| Контакт 44 | P15.3 — GPIO / analog input capable |
| Контакт 45 | P15.4 — GPIO / analog input capable |
| Контакт 46 | P15.5 — GPIO / analog input capable |
| Контакт 47 | P15.6 — GPIO / analog input capable |
| Контакт 48 | P15.7 — GPIO / analog input capable |
| Контакт 49 | VSS — Ground reference |
| Контакт 50 | ETH_REF_CLK — Ethernet reference clock (50 MHz) |
| Контакт 51 | ETH_MDC — Ethernet management data clock |
| Контакт 52 | ETH_MDIO — Ethernet management data I/O |
| Контакт 53 | ETH_TXD0 — Ethernet transmit data 0 |
| Контакт 54 | ETH_TXD1 — Ethernet transmit data 1 |
| Контакт 55 | ETH_TX_EN — Ethernet transmit enable |
| Контакт 56 | ETH_RXD0 — Ethernet receive data 0 |
| Контакт 57 | ETH_RXD1 — Ethernet receive data 1 |
| Контакт 58 | ETH_CRS_DV — Ethernet carrier sense / data valid |
| Контакт 59 | VDD — Core voltage supply |
| Контакт 60 | P14.0 — GPIO / analog input capable |
| Контакт 61 | P14.1 — GPIO / analog input capable |
| Контакт 62 | P14.2 — GPIO / analog input capable |
| Контакт 63 | P14.3 — GPIO / analog input capable |
| Контакт 64 | P14.4 — GPIO / analog input capable |
| Контакт 65 | P14.5 — GPIO / analog input capable |
| Контакт 66 | P14.6 — GPIO / analog input capable |
| Контакт 67 | P14.7 — GPIO / analog input capable |
| Контакт 68 | VSS — Ground reference |
| Контакт 69 | P13.0 — GPIO / analog input capable |
| Контакт 70 | P13.1 — GPIO / analog input capable |
| Контакт 71 | P13.2 — GPIO / analog input capable |
| Контакт 72 | P13.3 — GPIO / analog input capable |
| Контакт 73 | P13.4 — GPIO / analog input capable |
| Контакт 74 | P13.5 — GPIO / analog input capable |
| Контакт 75 | P13.6 — GPIO / analog input capable |
| Контакт 76 | P13.7 — GPIO / analog input capable |
| Контакт 77 | VSS — Ground reference |
| Контакт 78 | LIN0_TX — LIN channel 0 transmit |
| Контакт 79 | LIN0_RX — LIN channel 0 receive |
| Контакт 80 | LIN1_TX — LIN channel 1 transmit |
| Контакт 81 | LIN1_RX — LIN channel 1 receive |
| Контакт 82 | SPI0_CLK — SPI channel 0 clock |
| Контакт 83 | SPI0_MOSI — SPI channel 0 master-out / slave-in |
| Контакт 84 | SPI0_MISO — SPI channel 0 master-in / slave-out |
| Контакт 85 | SPI0_CS — SPI channel 0 chip select |
| Контакт 86 | P20.0 — GPIO / analog input capable |
| Контакт 87 | P20.1 — GPIO / analog input capable |
| Контакт 88 | P20.2 — GPIO / analog input capable |
| Контакт 89 | P20.3 — GPIO / analog input capable |
| Контакт 90 | P20.4 — GPIO / analog input capable |
| Контакт 91 | P20.5 — GPIO / analog input capable |
| Контакт 92 | P20.6 — GPIO / analog input capable |
| Контакт 93 | P20.7 — GPIO / analog input capable |
| Контакт 94 | VSS — Ground reference |
| Контакт 95 | ADC0_AN0 — Analog-to-digital converter channel 0 input 0 |
| Контакт 96 | ADC0_AN1 — Analog-to-digital converter channel 0 input 1 |
| Контакт 97 | ADC0_AN2 — Analog-to-digital converter channel 0 input 2 |
| Контакт 98 | ADC0_AN3 — Analog-to-digital converter channel 0 input 3 |
| Контакт 99 | ADC0_AN4 — Analog-to-digital converter channel 0 input 4 |
| Контакт 100 | ADC0_AN5 — Analog-to-digital converter channel 0 input 5 |
| Контакт 101 | VSS — Ground reference |
| Контакт 102 | Test Mode Select (JTAG/DAP) — JTAG/DAP test mode select |
| Контакт 103 | TCK — Test Clock (JTAG/DAP) |
| Контакт 104 | TDO — Test Data Out (JTAG/DAP) |
| Контакт 105 | TDI — Test Data In (JTAG/DAP) |
| Контакт 106 | TRST_N — Test Reset (active low, JTAG/DAP) |
| Контакт 107 | BRKOUT — Breakout / debug trigger |
| Контакт 108 | BRKIN — Break-in / debug request |
| Контакт 109 | P21.0 — GPIO / analog input capable |
| Контакт 110 | P21.1 — GPIO / analog input capable |
| Контакт 111 | P21.2 — GPIO / analog input capable |
| Контакт 112 | P21.3 — GPIO / analog input capable |
| Контакт 113 | P21.4 — GPIO / analog input capable |
| Контакт 114 | P21.5 — GPIO / analog input capable |
| Контакт 115 | P21.6 — GPIO / analog input capable |
| Контакт 116 | P21.7 — GPIO / analog input capable |
| Контакт 117 | VSS — Ground reference |
| Контакт 118 | RESET_N — External reset (active low) |
| Контакт 119 | ESR0 — External Service Request 0 (NMI) |
| Контакт 120 | ESR1 — External Service Request 1 |
| Контакт 121 | P22.0 — GPIO / analog input capable |
| Контакт 122 | P22.1 — GPIO / analog input capable |
| Контакт 123 | P22.2 — GPIO / analog input capable |
| Контакт 124 | P22.3 — GPIO / analog input capable |
| Контакт 125 | VSS — Ground reference |
| Контакт 126 | P23.0 — GPIO / analog input capable |
| Контакт 127 | P23.1 — GPIO / analog input capable |
| Контакт 128 | P23.2 — GPIO / analog input capable |
| Контакт 129 | P23.3 — GPIO / analog input capable |
| Контакт 130 | P23.4 — GPIO / analog input capable |
| Контакт 131 | P23.5 — GPIO / analog input capable |
| Контакт 132 | P23.6 — GPIO / analog input capable |
| Контакт 133 | P23.7 — GPIO / analog input capable |
| Контакт 134 | VSS — Ground reference |
| Контакт 135 | P33.13 — GPIO / wake-up capable |
| Контакт 136 | P33.14 — GPIO / wake-up capable |
| Контакт 137 | P33.15 — GPIO / wake-up capable |
| Контакт 138 | NC — Not connected (per datasheet) |
| Контакт 139 | NC — Not connected (per datasheet) |
| Контакт 140 | NC — Not connected (per datasheet) |
| Контакт 141 | VSS — Ground reference |
| Контакт 142 | VDD — Core voltage supply |
| Контакт 143 | VEXT — External voltage supply (5V or 3.3V) |
| Контакт 144 | VSS_PAD — Pad ground reference |
Типичное применение
SAK-TC364DP-64F300F подходит для 6 применениеs: Electric Power Steering (EPS) ECU, Battery Management System (BMS) Master, Brake-by-Wire / Chassis Domain ECU, Airbag / Restraint Control Unit, Zone / Body Domain Controller, Industrial Safety PLC / SIL-3 Controller.
Electric Power Steering (EPS) ECU
The SAK-TC364DP-64F300F is well-suited to drive-by-wire electric power steering ECUs where ASIL-D torque feedback and steering-angle calculations must execute in real time. The dual TriCore v1.6.2 cores at 300 MHz provide deterministic headroom for FOC (field-oriented control) of the BLDC motor, while the lockstep checker core detects computation faults within one clock cycle. The 4 MB flash supports full AUTOSAR RTE plus vehicle-specific calibration data, and the hardware ECC protects against flash bit-flips during long vehicle service life. Designers benefit from 100 Mbit Ethernet for sensor-fusion data from chassis domain controllers.
Рекомендуется
Battery Management System (BMS) Master
In xEV battery management master controllers, the SAK-TC364DP-64F300F's dual-core lockstep architecture delivers the ASIL-D diagnostic coverage required for state-of-charge (SoC) and state-of-health (SoH) computations across thousands of cells. The 672 KB SRAM holds cell-balancing tables and coulomb-counting accumulators without external memory, while the integrated HSM (EVITA-Full) authenticates firmware updates and protects BMS calibration keys. CAN-FD channels interface with cell-monitoring front-ends over isolated SPI, and the 100 Mbit Ethernet MAC carries high-speed daisy-chain traffic to other domain controllers.
Рекомендуется
Brake-by-Wire / Chassis Domain ECU
Brake-by-wire and integrated chassis controllers demand microsecond-level deterministic response to wheel-speed sensor inputs and ASIL-D computation of brake force distribution. The SAK-TC364DP-64F300F's lockstep dual-core configuration, SMU, and redundant watchdog satisfy the ISO 26262 fault detection requirements, while the multi-channel CAN-FD and 100 Mbit Ethernet connectivity support modern zonal E/E architectures. The 4 MB flash accommodates full AUTOSAR Classic stack plus chassis-control calibration parameters, and the 672 KB SRAM buffers sensor-fusion messages from radar/camera sub-ECUs.
Рекомендуется
Airbag / Restraint Control Unit
In airbag and occupant-safety ECUs, the SAK-TC364DP-64F300F's ASIL-D lockstep architecture provides the diagnostic coverage mandated for crash-detection and deployment-decision algorithms. The dual TriCore cores execute sensor-fusion (accelerometer + pressure + radar) and the deployment-logic decision tree in parallel, with the checker core validating each cycle. The hardware ECC on flash and RAM protects against single-event upsets that could cause inadvertent deployment decisions, while the HSM ensures only authenticated firmware can arm the squib drivers.
Рекомендуется
Zone / Body Domain Controller
Modern zonal E/E architectures consolidate multiple body-control functions into a single domain controller powered by an ASIL-D capable MCU. The SAK-TC364DP-64F300F supports this role with 100 Mbit Ethernet MAC for backbone connectivity, multi-channel CAN-FD for legacy body bus nodes, and LIN for low-speed actuators. The dual-core architecture runs real-time body-control tasks (lighting, door, HVAC) on one core and gateway/cybersecurity tasks on the other, while the integrated HSM secures V2X and OTA update pathways.
Рекомендуется
Industrial Safety PLC / SIL-3 Controller
Beyond automotive, the SAK-TC364DP-64F300F is a strong fit for industrial safety PLCs targeting IEC 61508 SIL-3 / ISO 13849 PL=d. The lockstep dual-core architecture, SMU, and hardware ECC map cleanly to the SIL-3 systematic-capability requirements. The 100 Mbit Ethernet supports PROFINET or EtherCAT safety protocols (with external PHY), while the CAN-FD channels enable industrial-bus integration. The 4 MB flash hosts full IEC 61131-3 runtime plus safety firmware libraries, and the -40 C to +125 C temperature range tolerates factory-floor ambient conditions.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SAK-TC364DP-64F300F — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | SAK-TC364DP-64F300W | TC364DP64F300FAAKXUMA1 | SAK-TC377DP-64F300S | SAK-TC387QP-160F300S | SAK-TC364DP-64F200F | SAK-TC336DP-64F300S |
|---|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-LQFP-144-22 | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same |
| Core Architecture | TriCore v1.6.2 dual-core | TriCore v1.6.2 dual-core | TriCore v1.6.2 dual-core | TriCore v1.6.2 triple-core | TriCore v1.6.2 quad-core | TriCore v1.6.2 dual-core | TriCore v1.6.2 dual-core |
| Maximum Clock Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 200 MHz | 300 MHz |
| Functional Safety | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D |
| 100 Mbit Ethernet | Yes | Yes | Yes | Yes | Yes | Yes | No (reduced feature set) |
| Hardware Security Module | EVITA-Full | EVITA-Full | EVITA-Full | EVITA-Full | EVITA-Full | EVITA-Full | EVITA-Medium |
Ключевые отличия
- Dual-core lockstep with hardware ECC for ASIL-D (против SAK-TC364DP-64F300W)
- Triple-core upgrade path on identical footprint (против SAK-TC377DP-64F300S)
- Integrated HSM with EVITA-Full security (против SAK-TC336DP-64F300S)
Заметки по проектированию
The SAK-TC364DP-64F300F requires a stable 5V or 3.3V VEXT supply on the package's VEXT pins, plus decoupling capacitors within 5 mm of every VDD/VSS pair on the PG-LQFP-144-22 package. Use a 100 nF X7R ceramic per VDD pin and a bulk 4.7 uF to 10 uF X7R capacitor close to the package. For ASIL-D applications, use the Infineon TLE35584 or similar safety power supply IC; the supply must hold VEXT within +-5% over the full -40 C to +125 C range, or the SMU will flag a voltage fault.
Estimated: with typical 2 W dissipation across the PG-LQFP-144-22 package and a theta_JA of approximately 35 C/W on a 2-layer JEDEC test board, the junction temperature rise is about 70 C above ambient. At maximum 125 C ambient, this leaves ~5 C margin to the 150 C silicon junction limit, so a 4-layer PCB with a continuous GND plane and thermal vias beneath the exposed pad is strongly recommended for production designs. Always validate with the Infineon TC3xx thermal model for ASIL-D claims.
Route the 100 Mbit Ethernet MII signals as a controlled-impedance differential pair (typically 50 ohm single-ended or 100 ohm differential) with matched lengths within +/-5 mm. Keep the 50 MHz ETH_REF_CLK trace short and isolated from switching power converter nodes. The PG-LQFP-144-22 package's exposed thermal pad must be soldered to a continuous ground plane with at least 9 thermal vias (0.3 mm drill, 0.6 mm pitch) to dissipate the 2 W typical power.
Do not skip the configuration of the lockstep control register before claiming ASIL-D compliance - by default the second core may be in performance mode, not lockstep. Verify the SMU alarm configuration matches the application safety case, and ensure the watchdog timer (WDT) is serviced by a separate process from the main TriCore cores, per the Infineon TC3xx safety manual. Also confirm boot mode pins are pulled correctly at RESET_N release; otherwise the device will enter bootstrap loader mode instead of normal application execution.
Информация о соответствии
AEC-Q100 qualified for automotive Grade 1 (-40 C to +125 C). ISO 26262 ASIL-D capable per Infineon TC3xx safety manual. Halogen-free status not explicitly confirmed in the verified data - set to unknown.
