SAK-TC364DP-64F300F - AURIX TC36x Dual-Core 300MHz MCU | Infineon
부품 번호: SAK-TC364DP-64F300F ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $24.5 | $24.50 |
| 10 | $22.1 | $221.00 |
| 100 | $19.8 | $1,980.00 |
| 500 | $17.45 | $8,725.00 |
| 1,000 | $15.2 | $15,200.00 |
SAK-TC364DP-64F300F 개요
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and interrupt control on one die. In the automotive electronics hierarchy, an automotive MCU sits above general-purpose MCUs in functional-safety requirements because it must meet ASIL ratings defined by ISO 26262. The AURIX TC36xDP family is part of Infineon's second-generation AURIX family (TC3xx) and is positioned between the smaller TC33x and the larger TC37x/TC38x/TC39x devices, balancing performance, memory, and package cost for chassis and body-domain ECUs.
Key features of the SAK-TC364DP-64F300F include a hardware ECC unit on flash, built-in general-purpose timer (GPT) modules, integrated LDO voltage regulators, and a dedicated Peripheral Control Processor (PCP) for offloading interrupt-driven tasks from the main TriCore cores. The device supports single-voltage supply operation, multiple wake-up sources, and Infineon’s HSM (Hardware Security Module) for secure boot and cryptographic acceleration. Typical power consumption is below 2 W across the full temperature range.
The TC36xDP is built on a 65 nm embedded flash technology and includes a lockstep checker core that runs in parallel with the main core for diagnostic coverage. This dual-core lockstep architecture, combined with a Safety Management Unit (SMU) and a redundant Watchdog Timer, provides the systematic and random fault detection required for ASIL-D applications. The integrated DMA engine has multiple channels for high-throughput data movement between peripherals and memory.
Typical applications include automotive chassis control (brake, steering, suspension), electric power steering (EPS), airbag ECUs, battery management systems for xEV, and zone/body domain controllers. The device's 100 Mbit Ethernet MAC makes it suitable for in-vehicle networking backbones, while the multiple CAN-FD channels support traditional automotive bus architectures. The integrated HSM also supports secure OTA (over-the-air) firmware update requirements.
When designing with the TC36xDP, ensure that the lockstep mode is properly configured before ASIL-D safety claims can be made. Decoupling capacitors must be placed close to all VDD pins, and the external crystal or clock source must meet the jitter requirements specified in the Infineon TC3xx user manual for Ethernet and CAN-FD communication. JTAG/DAP access pins should be routed to a secure test header for production programming.
This page synthesizes distributor pricing, AURIX family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate second-source options for safety-critical automotive designs.
드롭인 대체품: SAK-TC364DP-64F300F — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: SAK-TC364DP-64F300F (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Ethernet, Number of Cores, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
SAK-TC364DP-64F300W
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TC364DP64F300FAAKXUMA1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SAK-TC377DP-64F300S
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
SAK-TC387QP-160F300S
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$25.95 / 개
데이터시트 보기 →SAK-TC364DP-64F200F
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
SAK-TC336DP-64F300S
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
SAK-TC364DP-64F300F 최대 정격 & 전기적 특성
| Core Architecture | TriCore v1.6.2 (32-bit) |
| Number of Cores | 2 (1 main + 1 checker in lockstep) |
| 최대 클록 주파수 | 300 MHz |
| Program Flash | 4 MB |
| SRAM | 672 KB |
| 공급 전압 | 3.3 V / 5 V (single-voltage operation) |
| Functional Safety | ISO 26262 ASIL-D capable |
| Automotive Grade | AEC-Q100 qualified |
| Ethernet | 100 Mbit (MII/RMII) |
| CAN-FD Ports | Multiple (per TC36xDP configuration) |
| LIN Channels | Multiple |
| Hardware Security Module | Yes (EVITA-Full) |
| Hardware ECC | Yes (Flash + RAM) |
| Integrated LDO | Yes |
| Typical Power Consumption | < 2 W |
| 패키지 | PG-LQFP-144-22 (TQFP-144) |
| 동작 온도 | -40 C to +125 C (automotive Grade 1) |
| RoHS 상태 | Compliant |
SAK-TC364DP-64F300F 핀 구성
| 핀 1 | VEXT — External voltage supply (5V or 3.3V) |
| 핀 2 | P00.0 — GPIO / general-purpose I/O |
| 핀 3 | P00.1 — GPIO / general-purpose I/O |
| 핀 4 | P00.2 — GPIO / general-purpose I/O |
| 핀 5 | P00.3 — GPIO / general-purpose I/O |
| 핀 6 | P00.4 — GPIO / general-purpose I/O |
| 핀 7 | P00.5 — GPIO / general-purpose I/O |
| 핀 8 | P00.6 — GPIO / general-purpose I/O |
| 핀 9 | P00.7 — GPIO / general-purpose I/O |
| 핀 10 | P00.8 — GPIO / general-purpose I/O |
| 핀 11 | VSS — Ground reference |
| 핀 12 | P00.9 — GPIO / general-purpose I/O |
| 핀 13 | P00.10 — GPIO / general-purpose I/O |
| 핀 14 | P00.11 — GPIO / general-purpose I/O |
| 핀 15 | P00.12 — GPIO / general-purpose I/O |
| 핀 16 | P00.13 — GPIO / general-purpose I/O |
| 핀 17 | P00.14 — GPIO / general-purpose I/O |
| 핀 18 | P00.15 — GPIO / general-purpose I/O |
| 핀 19 | P33.0 — GPIO / wake-up capable |
| 핀 20 | P33.1 — GPIO / wake-up capable |
| 핀 21 | P33.2 — GPIO / wake-up capable |
| 핀 22 | P33.3 — GPIO / wake-up capable |
| 핀 23 | P33.4 — GPIO / wake-up capable |
| 핀 24 | P33.5 — GPIO / wake-up capable |
| 핀 25 | VSS — Ground reference |
| 핀 26 | XTAL1 — External crystal oscillator input |
| 핀 27 | XTAL2 — External crystal oscillator output |
| 핀 28 | VDD — Core voltage supply (1.3V internal LDO) |
| 핀 29 | P33.6 — GPIO / wake-up capable |
| 핀 30 | P33.7 — GPIO / wake-up capable |
| 핀 31 | P33.8 — GPIO / wake-up capable |
| 핀 32 | P33.9 — GPIO / wake-up capable |
| 핀 33 | P33.10 — GPIO / wake-up capable |
| 핀 34 | P33.11 — GPIO / wake-up capable |
| 핀 35 | P33.12 — GPIO / wake-up capable |
| 핀 36 | VSS — Ground reference |
| 핀 37 | CAN0_TX — CAN-FD channel 0 transmit |
| 핀 38 | CAN0_RX — CAN-FD channel 0 receive |
| 핀 39 | CAN1_TX — CAN-FD channel 1 transmit |
| 핀 40 | CAN1_RX — CAN-FD channel 1 receive |
| 핀 41 | P15.0 — GPIO / analog input capable |
| 핀 42 | P15.1 — GPIO / analog input capable |
| 핀 43 | P15.2 — GPIO / analog input capable |
| 핀 44 | P15.3 — GPIO / analog input capable |
| 핀 45 | P15.4 — GPIO / analog input capable |
| 핀 46 | P15.5 — GPIO / analog input capable |
| 핀 47 | P15.6 — GPIO / analog input capable |
| 핀 48 | P15.7 — GPIO / analog input capable |
| 핀 49 | VSS — Ground reference |
| 핀 50 | ETH_REF_CLK — Ethernet reference clock (50 MHz) |
| 핀 51 | ETH_MDC — Ethernet management data clock |
| 핀 52 | ETH_MDIO — Ethernet management data I/O |
| 핀 53 | ETH_TXD0 — Ethernet transmit data 0 |
| 핀 54 | ETH_TXD1 — Ethernet transmit data 1 |
| 핀 55 | ETH_TX_EN — Ethernet transmit enable |
| 핀 56 | ETH_RXD0 — Ethernet receive data 0 |
| 핀 57 | ETH_RXD1 — Ethernet receive data 1 |
| 핀 58 | ETH_CRS_DV — Ethernet carrier sense / data valid |
| 핀 59 | VDD — Core voltage supply |
| 핀 60 | P14.0 — GPIO / analog input capable |
| 핀 61 | P14.1 — GPIO / analog input capable |
| 핀 62 | P14.2 — GPIO / analog input capable |
| 핀 63 | P14.3 — GPIO / analog input capable |
| 핀 64 | P14.4 — GPIO / analog input capable |
| 핀 65 | P14.5 — GPIO / analog input capable |
| 핀 66 | P14.6 — GPIO / analog input capable |
| 핀 67 | P14.7 — GPIO / analog input capable |
| 핀 68 | VSS — Ground reference |
| 핀 69 | P13.0 — GPIO / analog input capable |
| 핀 70 | P13.1 — GPIO / analog input capable |
| 핀 71 | P13.2 — GPIO / analog input capable |
| 핀 72 | P13.3 — GPIO / analog input capable |
| 핀 73 | P13.4 — GPIO / analog input capable |
| 핀 74 | P13.5 — GPIO / analog input capable |
| 핀 75 | P13.6 — GPIO / analog input capable |
| 핀 76 | P13.7 — GPIO / analog input capable |
| 핀 77 | VSS — Ground reference |
| 핀 78 | LIN0_TX — LIN channel 0 transmit |
| 핀 79 | LIN0_RX — LIN channel 0 receive |
| 핀 80 | LIN1_TX — LIN channel 1 transmit |
| 핀 81 | LIN1_RX — LIN channel 1 receive |
| 핀 82 | SPI0_CLK — SPI channel 0 clock |
| 핀 83 | SPI0_MOSI — SPI channel 0 master-out / slave-in |
| 핀 84 | SPI0_MISO — SPI channel 0 master-in / slave-out |
| 핀 85 | SPI0_CS — SPI channel 0 chip select |
| 핀 86 | P20.0 — GPIO / analog input capable |
| 핀 87 | P20.1 — GPIO / analog input capable |
| 핀 88 | P20.2 — GPIO / analog input capable |
| 핀 89 | P20.3 — GPIO / analog input capable |
| 핀 90 | P20.4 — GPIO / analog input capable |
| 핀 91 | P20.5 — GPIO / analog input capable |
| 핀 92 | P20.6 — GPIO / analog input capable |
| 핀 93 | P20.7 — GPIO / analog input capable |
| 핀 94 | VSS — Ground reference |
| 핀 95 | ADC0_AN0 — Analog-to-digital converter channel 0 input 0 |
| 핀 96 | ADC0_AN1 — Analog-to-digital converter channel 0 input 1 |
| 핀 97 | ADC0_AN2 — Analog-to-digital converter channel 0 input 2 |
| 핀 98 | ADC0_AN3 — Analog-to-digital converter channel 0 input 3 |
| 핀 99 | ADC0_AN4 — Analog-to-digital converter channel 0 input 4 |
| 핀 100 | ADC0_AN5 — Analog-to-digital converter channel 0 input 5 |
| 핀 101 | VSS — Ground reference |
| 핀 102 | Test Mode Select (JTAG/DAP) — JTAG/DAP test mode select |
| 핀 103 | TCK — Test Clock (JTAG/DAP) |
| 핀 104 | TDO — Test Data Out (JTAG/DAP) |
| 핀 105 | TDI — Test Data In (JTAG/DAP) |
| 핀 106 | TRST_N — Test Reset (active low, JTAG/DAP) |
| 핀 107 | BRKOUT — Breakout / debug trigger |
| 핀 108 | BRKIN — Break-in / debug request |
| 핀 109 | P21.0 — GPIO / analog input capable |
| 핀 110 | P21.1 — GPIO / analog input capable |
| 핀 111 | P21.2 — GPIO / analog input capable |
| 핀 112 | P21.3 — GPIO / analog input capable |
| 핀 113 | P21.4 — GPIO / analog input capable |
| 핀 114 | P21.5 — GPIO / analog input capable |
| 핀 115 | P21.6 — GPIO / analog input capable |
| 핀 116 | P21.7 — GPIO / analog input capable |
| 핀 117 | VSS — Ground reference |
| 핀 118 | RESET_N — External reset (active low) |
| 핀 119 | ESR0 — External Service Request 0 (NMI) |
| 핀 120 | ESR1 — External Service Request 1 |
| 핀 121 | P22.0 — GPIO / analog input capable |
| 핀 122 | P22.1 — GPIO / analog input capable |
| 핀 123 | P22.2 — GPIO / analog input capable |
| 핀 124 | P22.3 — GPIO / analog input capable |
| 핀 125 | VSS — Ground reference |
| 핀 126 | P23.0 — GPIO / analog input capable |
| 핀 127 | P23.1 — GPIO / analog input capable |
| 핀 128 | P23.2 — GPIO / analog input capable |
| 핀 129 | P23.3 — GPIO / analog input capable |
| 핀 130 | P23.4 — GPIO / analog input capable |
| 핀 131 | P23.5 — GPIO / analog input capable |
| 핀 132 | P23.6 — GPIO / analog input capable |
| 핀 133 | P23.7 — GPIO / analog input capable |
| 핀 134 | VSS — Ground reference |
| 핀 135 | P33.13 — GPIO / wake-up capable |
| 핀 136 | P33.14 — GPIO / wake-up capable |
| 핀 137 | P33.15 — GPIO / wake-up capable |
| 핀 138 | NC — Not connected (per datasheet) |
| 핀 139 | NC — Not connected (per datasheet) |
| 핀 140 | NC — Not connected (per datasheet) |
| 핀 141 | VSS — Ground reference |
| 핀 142 | VDD — Core voltage supply |
| 핀 143 | VEXT — External voltage supply (5V or 3.3V) |
| 핀 144 | VSS_PAD — Pad ground reference |
일반적인 애플리케이션
SAK-TC364DP-64F300F 적합 용도: 6 애플리케이션s: Electric Power Steering (EPS) ECU, Battery Management System (BMS) Master, Brake-by-Wire / Chassis Domain ECU, Airbag / Restraint Control Unit, Zone / Body Domain Controller, Industrial Safety PLC / SIL-3 Controller.
Electric Power Steering (EPS) ECU
The SAK-TC364DP-64F300F is well-suited to drive-by-wire electric power steering ECUs where ASIL-D torque feedback and steering-angle calculations must execute in real time. The dual TriCore v1.6.2 cores at 300 MHz provide deterministic headroom for FOC (field-oriented control) of the BLDC motor, while the lockstep checker core detects computation faults within one clock cycle. The 4 MB flash supports full AUTOSAR RTE plus vehicle-specific calibration data, and the hardware ECC protects against flash bit-flips during long vehicle service life. Designers benefit from 100 Mbit Ethernet for sensor-fusion data from chassis domain controllers.
추천
Battery Management System (BMS) Master
In xEV battery management master controllers, the SAK-TC364DP-64F300F's dual-core lockstep architecture delivers the ASIL-D diagnostic coverage required for state-of-charge (SoC) and state-of-health (SoH) computations across thousands of cells. The 672 KB SRAM holds cell-balancing tables and coulomb-counting accumulators without external memory, while the integrated HSM (EVITA-Full) authenticates firmware updates and protects BMS calibration keys. CAN-FD channels interface with cell-monitoring front-ends over isolated SPI, and the 100 Mbit Ethernet MAC carries high-speed daisy-chain traffic to other domain controllers.
추천
Brake-by-Wire / Chassis Domain ECU
Brake-by-wire and integrated chassis controllers demand microsecond-level deterministic response to wheel-speed sensor inputs and ASIL-D computation of brake force distribution. The SAK-TC364DP-64F300F's lockstep dual-core configuration, SMU, and redundant watchdog satisfy the ISO 26262 fault detection requirements, while the multi-channel CAN-FD and 100 Mbit Ethernet connectivity support modern zonal E/E architectures. The 4 MB flash accommodates full AUTOSAR Classic stack plus chassis-control calibration parameters, and the 672 KB SRAM buffers sensor-fusion messages from radar/camera sub-ECUs.
추천
Airbag / Restraint Control Unit
In airbag and occupant-safety ECUs, the SAK-TC364DP-64F300F's ASIL-D lockstep architecture provides the diagnostic coverage mandated for crash-detection and deployment-decision algorithms. The dual TriCore cores execute sensor-fusion (accelerometer + pressure + radar) and the deployment-logic decision tree in parallel, with the checker core validating each cycle. The hardware ECC on flash and RAM protects against single-event upsets that could cause inadvertent deployment decisions, while the HSM ensures only authenticated firmware can arm the squib drivers.
추천
Zone / Body Domain Controller
Modern zonal E/E architectures consolidate multiple body-control functions into a single domain controller powered by an ASIL-D capable MCU. The SAK-TC364DP-64F300F supports this role with 100 Mbit Ethernet MAC for backbone connectivity, multi-channel CAN-FD for legacy body bus nodes, and LIN for low-speed actuators. The dual-core architecture runs real-time body-control tasks (lighting, door, HVAC) on one core and gateway/cybersecurity tasks on the other, while the integrated HSM secures V2X and OTA update pathways.
추천
Industrial Safety PLC / SIL-3 Controller
Beyond automotive, the SAK-TC364DP-64F300F is a strong fit for industrial safety PLCs targeting IEC 61508 SIL-3 / ISO 13849 PL=d. The lockstep dual-core architecture, SMU, and hardware ECC map cleanly to the SIL-3 systematic-capability requirements. The 100 Mbit Ethernet supports PROFINET or EtherCAT safety protocols (with external PHY), while the CAN-FD channels enable industrial-bus integration. The 4 MB flash hosts full IEC 61131-3 runtime plus safety firmware libraries, and the -40 C to +125 C temperature range tolerates factory-floor ambient conditions.
추천
추천 제품 요약
엔지니어링 참조 데이터: SAK-TC364DP-64F300F — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SAK-TC364DP-64F300W | TC364DP64F300FAAKXUMA1 | SAK-TC377DP-64F300S | SAK-TC387QP-160F300S | SAK-TC364DP-64F200F | SAK-TC336DP-64F300S |
|---|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-LQFP-144-22 | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same | PG-LQFP-144-22 - same |
| Core Architecture | TriCore v1.6.2 dual-core | TriCore v1.6.2 dual-core | TriCore v1.6.2 dual-core | TriCore v1.6.2 triple-core | TriCore v1.6.2 quad-core | TriCore v1.6.2 dual-core | TriCore v1.6.2 dual-core |
| Maximum Clock Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 200 MHz | 300 MHz |
| Functional Safety | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D | ISO 26262 ASIL-D |
| 100 Mbit Ethernet | Yes | Yes | Yes | Yes | Yes | Yes | No (reduced feature set) |
| Hardware Security Module | EVITA-Full | EVITA-Full | EVITA-Full | EVITA-Full | EVITA-Full | EVITA-Full | EVITA-Medium |
주요 차별점
- Dual-core lockstep with hardware ECC for ASIL-D (vs SAK-TC364DP-64F300W)
- Triple-core upgrade path on identical footprint (vs SAK-TC377DP-64F300S)
- Integrated HSM with EVITA-Full security (vs SAK-TC336DP-64F300S)
설계 노트
The SAK-TC364DP-64F300F requires a stable 5V or 3.3V VEXT supply on the package's VEXT pins, plus decoupling capacitors within 5 mm of every VDD/VSS pair on the PG-LQFP-144-22 package. Use a 100 nF X7R ceramic per VDD pin and a bulk 4.7 uF to 10 uF X7R capacitor close to the package. For ASIL-D applications, use the Infineon TLE35584 or similar safety power supply IC; the supply must hold VEXT within +-5% over the full -40 C to +125 C range, or the SMU will flag a voltage fault.
Estimated: with typical 2 W dissipation across the PG-LQFP-144-22 package and a theta_JA of approximately 35 C/W on a 2-layer JEDEC test board, the junction temperature rise is about 70 C above ambient. At maximum 125 C ambient, this leaves ~5 C margin to the 150 C silicon junction limit, so a 4-layer PCB with a continuous GND plane and thermal vias beneath the exposed pad is strongly recommended for production designs. Always validate with the Infineon TC3xx thermal model for ASIL-D claims.
Route the 100 Mbit Ethernet MII signals as a controlled-impedance differential pair (typically 50 ohm single-ended or 100 ohm differential) with matched lengths within +/-5 mm. Keep the 50 MHz ETH_REF_CLK trace short and isolated from switching power converter nodes. The PG-LQFP-144-22 package's exposed thermal pad must be soldered to a continuous ground plane with at least 9 thermal vias (0.3 mm drill, 0.6 mm pitch) to dissipate the 2 W typical power.
Do not skip the configuration of the lockstep control register before claiming ASIL-D compliance - by default the second core may be in performance mode, not lockstep. Verify the SMU alarm configuration matches the application safety case, and ensure the watchdog timer (WDT) is serviced by a separate process from the main TriCore cores, per the Infineon TC3xx safety manual. Also confirm boot mode pins are pulled correctly at RESET_N release; otherwise the device will enter bootstrap loader mode instead of normal application execution.
규정 준수 정보
AEC-Q100 qualified for automotive Grade 1 (-40 C to +125 C). ISO 26262 ASIL-D capable per Infineon TC3xx safety manual. Halogen-free status not explicitly confirmed in the verified data - set to unknown.
