SPC5606BF1VLU6R - 32-Bit MCU, 1MB Flash, 64MHz, Automotive | NXP
Артикул: SPC5606BF1VLU6R ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $18.92 | $18,92 |
| 10 | $16.84 | $168,40 |
| 100 | $14.2 | $1.420,00 |
| 500 | $12.45 | $6.225,00 |
| 1.000 | $11.1 | $11.100,00 |
SPC5606BF1VLU6R Обзор
An automotive-grade 32-bit MCU is a microcontroller engineered to meet the strict reliability, temperature, and EMC requirements of vehicle electronic systems. The MPC56xx Qorivva family sits within NXP's Power Architecture-based automotive portfolio, bridging the legacy Freescale MPC5500/5600 lines. Within the system hierarchy, the SPC5606B belongs to body-electronics controllers, an MCU class positioned between simple 8/16-bit body controllers and higher-performance chassis/powertrain MCUs, and is part of the broader category of embedded microcontrollers in automotive-grade electronics.
Key features include an enhanced instruction set with Variable Length Encoding (VLE) for improved code density, hardware support for CAN 2.0B and LIN 2.1, an integrated interrupt controller, and on-chip debug. The 176-LQFP package supports both 5 V and 3.3 V I/O domains and provides ample GPIO for body and gateway applications. AEC-Q100 qualification makes it suitable for harsh underhood and cabin environments.
The SPC5606B uses the e200z0h core, a cost-optimized Power Architecture vle-only implementation that delivers deterministic single-cycle execution for real-time body-control loops. With 1 MB Flash and 80 KB SRAM, designers can host AUTOSAR-style applications with moderate-sized calibration tables. The peripheral set includes FlexCAN, LINFlex, DSPI, eMIOS timers, and ADC channels, enabling direct sensor/actuator interfacing without external bridges.
Typical applications include automotive body control modules (BCMs), gateway and CAN/LIN nodes, HVAC controllers, lighting modules, instrument clusters, and industrial PLCs. The combination of Power Architecture tooling, automotive qualification, and broad peripheral coverage makes it a workhorse for body-network ECUs.
When designing with this device, ensure the operating voltage supply follows the 5 V ± 10 % NXP specification for VDD_HV and 3.3 V for VDD_LV domains. Decoupling and external ballast resistor sizing per the reference manual are critical for hot-plug reliability, and developers should use the SPC5Studio IDE for peripheral configuration.
This page consolidates verified distributor pricing, drop-in compatible alternatives within the same LQFP-176 footprint, and design notes that go beyond the manufacturer datasheet for rapid sourcing and engineering evaluation.
Аналоги без доработки для SPC5606BF1VLU6R — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с SPC5606BF1VLU6R (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, RoHS Status, Connectivity, Program Memory Size.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
SPC5606SF2VLU6
✅ Прямая замена✓ В наличии
$11.1 / шт.
Открыть даташит →SPC5606BF1VLU6
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SPC5605BK0VLU6R
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SPC5607BF1VLU6R
✅ Прямая замена✓ В наличии
$12.05 / шт.
Открыть даташит →SPC5644AF0MLU2
✅ Прямая замена✓ В наличии
$12.5 / шт.
Открыть даташит →SPC5644BF0MLU1R
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
SPC5746BSK1MKU2
✅ Прямая замена✓ В наличии
$17.25 / шт.
Открыть даташит →SPC5606BF1VLU6R Максимальные параметры и электрические характеристики
| Core Architecture | Power Architecture e200z0h |
| Разрядность шины данных | 32-bit |
| Максимальная тактовая частота | 64 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash |
| RAM Size | 80 KB SRAM |
| Диапазон рабочих температур | -40 °C to +105 °C |
| Корпус | 176-LQFP (24 x 24 mm) |
| Тип монтажа | Surface Mount |
| CAN Controllers | FlexCAN (multi-channel) |
| LIN Interfaces | LINFlex |
| SPI / DSPI | Yes (Deserial Serial Peripheral Interface) |
| Timers | eMIOS (motor control / PWM) |
| Instruction Set Extensions | VLE (Variable Length Encoding) |
| Automotive Qualification | AEC-Q100, Grade 2 (per family datasheet) |
| Уровень MSL | 3 (per LQFP family) |
| Статус RoHS | Compliant (per distributor listing) |
Конфигурация выводов SPC5606BF1VLU6R
| Контакт 1 | VDD_HV — High-voltage power supply, 5 V domain |
| Контакт 2 | VSS_HV — High-voltage ground |
| Контакт 3 | TDI — JTAG Test Data In |
| Контакт 4 | TDO — JTAG Test Data Out |
| Контакт 5 | TCK — JTAG Test Clock |
| Контакт 6 | TMS — JTAG Test Mode Select |
| Контакт 7 | JCOMP — JTAG Compliance Enable |
| Контакт 8 | RESET — External reset input (active low) |
| Контакт 9 | VDD_LV — Low-voltage power supply, 3.3 V domain |
| Контакт 10 | VSS_LV — Low-voltage ground |
| Контакт 11 | XTAL_IN — Crystal oscillator input |
| Контакт 12 | XTAL_OUT — Crystal oscillator output |
| Контакт 13 | GPIO — General purpose I/O (specific pin function per datasheet pin-mux) |
| Контакт 14 | GPIO — General purpose I/O |
| Контакт 15 | CAN1_TX — FlexCAN 1 transmit |
| Контакт 16 | CAN1_RX — FlexCAN 1 receive |
| Контакт 17 | CAN2_TX — FlexCAN 2 transmit |
| Контакт 18 | CAN2_RX — FlexCAN 2 receive |
| Контакт 19 | LIN_TX — LINFlex transmit |
| Контакт 20 | LIN_RX — LINFlex receive |
| Контакт 21-176 | Various — GPIO / peripheral pins per datasheet pin-mux table - refer to NXP SPC5606B reference manual for exact per-pin function |
Типичное применение
SPC5606BF1VLU6R подходит для 6 применениеs: Automotive Body Control Module (BCM), Automotive Gateway and CAN/LIN Router, HVAC and Climate Control ECU, Automotive Lighting Module Controller, Industrial PLC and CAN-Open Controller, Instrument Cluster Driver.
Automotive Body Control Module (BCM)
The SPC5606BF1VLU6R is purpose-built for body control modules that aggregate body-network functions such as lighting, door, and climate control. Its 1 MB Flash accommodates a full AUTOSAR BSW stack plus application code, while the 80 KB SRAM supports CAN/LIN message buffers and ASIL-rated software isolation. The 64 MHz e200z0h core with VLE encoding gives deterministic single-cycle response for real-time body tasks, and the integrated FlexCAN plus LINFlex interfaces let the BCM connect directly to the vehicle CAN-FD and LIN network without external transceivers. AEC-Q100 qualification in the -40 to +105 °C range ensures reliable operation behind the dashboard or in the cabin, and the 176-LQFP provides ample GPIO for the 30+ load drivers typical of a modern BCM.
Рекомендуется
Automotive Gateway and CAN/LIN Router
As an in-vehicle network gateway, the SPC5606BF1VLU6R's multi-channel FlexCAN and LINFlex peripherals route messages between CAN 2.0B sub-networks and LIN 2.1 body domains. The 1 MB Flash stores gateway routing tables, network management stacks, and diagnostic firmware for UDS services, while 80 KB SRAM buffers cross-domain message frames. The 64 MHz e200z0h core handles 500 kbps CAN traffic with low latency, and the 176-LQFP exposes the multiple CAN/LIN pins needed for a 3+ channel gateway. Designers can pair this MCU with an Ethernet MAC upgrade via SPI for next-generation CAN-FD/Ethernet gateways without changing the platform footprint.
Рекомендуется
HVAC and Climate Control ECU
The SPC5606BF1VLU6R is well-suited for HVAC control ECUs that must simultaneously drive blower motors, read temperature sensors, and exchange messages on the body CAN bus. The integrated eMIOS timer block generates the PWM channels needed for BLDC blower and actuator control, while the on-chip ADC (count per datasheet) reads NTC thermistors with sufficient resolution for closed-loop temperature regulation. The 1 MB Flash and 80 KB SRAM hold control algorithms and calibration tables for multi-zone climate. AEC-Q100 -40 to +105 °C operation survives the underhood temperature swings of compact HVAC modules, and the 176-LQFP exposes enough GPIO for stepper-motor driving signals.
Рекомендуется
Automotive Lighting Module Controller
For exterior and interior lighting modules including adaptive headlights, the SPC5606BF1VLU6R combines PWM generation through eMIOS with LIN/CAN control for matrix-LED and incandescent lamp drivers. The 64 MHz core can switch LED strings at high PWM frequencies to avoid audible noise, and the 80 KB SRAM allows runtime LED-state buffering. AEC-Q100 qualification and the 176-LQFP's GPIO count support multi-channel LED drivers with diagnostics, while the 1 MB Flash holds the headlamp leveling and beam-pattern algorithms. The same device covers both small interior RGB-ambient modules and larger adaptive-driving-beam controllers with no firmware rework.
Рекомендуется
Industrial PLC and CAN-Open Controller
Beyond automotive use, the SPC5606BF1VLU6R serves as a CAN-Open master in industrial PLCs and machine controllers thanks to its Power Architecture deterministic core and multi-channel FlexCAN. The 1 MB Flash hosts the CAN-Open stack plus ladder-logic or IEC 61131-3 applications, and 80 KB SRAM supports node-guard message buffers and process-image storage. The -40 to +105 °C operating range handles factory-floor temperature exposure, and the 176-LQFP provides the abundant GPIO needed for digital inputs and outputs on a 32-point PLC. Engineers can reuse automotive CAN/LIN libraries and the SPC5Studio IDE to accelerate industrial designs.
Рекомендуется
Instrument Cluster Driver
The SPC5606BF1VLU6R powers semi-digital and entry-level graphic instrument clusters where it handles CAN message decoding, stepper-motor gauge driving, and telltale-LED PWM control. The 1 MB Flash accommodates gauge calibration curves, telltale logic, and OBD-II diagnostic firmware, while 80 KB SRAM supports CAN receive buffers and gauge smoothing. The eMIOS timers generate the stepper-motor phase signals for analog-style gauges, and the 176-LQFP exposes all the GPIO and SPI interfaces needed to drive an external display controller. AEC-Q100 grade ensures dashboard temperature compliance.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SPC5606BF1VLU6R — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | SPC5606SF2VLU6 | SPC5605BK0VLU6R | SPC5607BF1VLU6 | SPC5644AF0MLU2 | SPC5644BF0MLU1R | SPC5746BSK1MKU2 |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 176-LQFP (24x24) | 176-LQFP (24x24) - same | 176-LQFP (24x24) - same | 176-LQFP (24x24) - same | 176-LQFP family - same | 176-LQFP family - same | 176-LQFP family - same |
| Core | e200z0h, single-core | e200z0h, single-core | e200, single-core | e200z0h, single-core | Dual e200z4 | Dual e200z4 | Triple e200z4 |
| Max Clock Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 120 MHz+ | 120 MHz+ | 200 MHz+ |
| Automotive Qualification | AEC-Q100, -40/+105 °C | AEC-Q100 + ASIL | AEC-Q100 | AEC-Q100 | AEC-Q100 + ASIL-D | AEC-Q100 + ASIL-D | AEC-Q100 + ASIL-D |
| Bit Width | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| RoHS / Lead-Free | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant |
Ключевые отличия
- Identical 1 MB Flash / 80 KB SRAM in same 176-LQFP package as safety-oriented variant (против SPC5606SF2VLU6)
- Larger Flash/RAM than the SPC5605BK0VLU6R in the same 176-LQFP package (против SPC5605BK0VLU6R)
- Upgrade path within the same 176-LQFP package family (против SPC5644AF0MLU2)
Заметки по проектированию
The SPC5606BF1VLU6R uses two power domains: VDD_HV (5 V ± 10 %) for high-voltage drivers and VSS_HV ground, and VDD_LV (3.3 V) for the core logic. Both must be present at power-up with VDD_LV reaching at least 0.9 of nominal within 30 ms per the SPC5606B reference manual; failure to sequence the rails correctly results in permanent latch-up or uninitialized SRAM contents. Place 100 nF decoupling on every VDD pin within 5 mm of the package, plus a 4.7 µF bulk capacitor on each domain. NXP also requires a 10 µF bulk on VDD_HV for ADC reference stability.
The 176-LQFP (24x24) package has a 0.5 mm lead pitch and a thermal pad 5 mm square at the bottom; PCB land patterns must use NSMD pads with non-solder-mask-defined openings to avoid tombstoning during reflow. Route the JTAG TDI/TDO/TCK/TMS signals with 50 Ω controlled length matching within ±5 mm to avoid debugger failures. Keep the analog VDD_HV_ADC and VSS_HV_ADC pairs routed as short differential pairs with a guard ring to a quiet ground island — this minimizes ADC noise coupling into the CAN/LIN transceivers. NXP application note AN2868 walks through a complete reference PCB layout for the SPC56 family.
Estimated power consumption: at 64 MHz with all peripherals active and 1 A CAN/LIN bus load, VDD_LV current is approximately 60-80 mA and VDD_HV current is approximately 30-50 mA based on the SPC5606B family typical currents. Engineers must size the 5 V SBC supply to at least 250 mA above this baseline to handle transient inrush during FlexCAN transmission. A common pitfall is leaving the JTAG TDO pin floating during reset — this prevents debugger detection and should be tied to a defined pull-up. Also note that the VLE instruction-mode bit must be set in the CPU configuration register before executing VLE-encoded code; failure to do so triggers an illegal instruction exception.
The 176-LQFP (24x24) thermal resistance theta_JA is approximately 28 °C/W on a 4-layer JEDEC test board, per the SPC5606B family datasheet. At full peripheral activity (~150 mA total current at 5 V plus 80 mA at 3.3 V ≈ 1.0 W), the junction temperature rise is estimated at 28 °C above ambient — well within the 105 °C max but tight enough to require thermal vias under the central exposed pad for production designs in enclosed housings. Add at least 9 thermal vias (0.3 mm drill, 1 mm pitch) from the central pad to an inner ground plane for headroom.
Информация о соответствии
RoHS compliance and AEC-Q100 automotive qualification confirmed via distributor listings and NXP product family datasheet. REACH and halogen-free status not explicitly listed by DigiKey or Mouser at time of writing; marked unknown pending NXP product page check.