STMicroelectronics

STM32F401CBU3 - 84MHz 128KB Cortex-M4 MCU | STMicroelectronics

Артикул: STM32F401CBU3 ✓ Активен
1.7 V to 3.6 V Vdss 48-pin UFQFPN, 7 mm x 7 mm Package 84 MHz Speed 128 KB Memory
MOQ: 1 |

STM32F401CBU3 Обзор

The STMicroelectronics STM32F401CBU3 is a 32-bit Arm Cortex-M4 microcontroller with DSP instructions, a floating-point unit, an 84 MHz operating frequency, and 128 KB of Flash memory in a 48-pin UFQFPN package. It belongs to the STM32F4 Dynamic Efficiency family and combines compact embedded processing with embedded-system connectivity and peripheral integration.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The STM32F401CBU3 sits within the hierarchy of microcontrollers, embedded processors, and programmable control devices. Its Cortex-M4 processor uses the Thumb instruction set and provides deterministic real-time control capabilities for products that need more processing capacity than a basic logic controller but require a compact, low-power implementation.

The principal device attributes include a maximum CPU frequency of 84 MHz, 128 KB of embedded Flash, a 1.7 V to 3.6 V operating supply range, and a choice of -40 °C to 85 °C or -40 °C to 105 °C temperature grades within the device family. The UFQFPN package measures 7 mm by 7 mm and provides a practical land pattern for compact industrial controllers, sensor nodes, medical instruments, and connected equipment. An exposed pad supports thermal dissipation where the PCB layout permits.

The Cortex-M4 core is designed for efficient embedded workloads and includes DSP and floating-point capabilities. These features allow real-time signal processing, control calculations, and protocol handling to execute directly on the MCU. The STM32F4 product family emphasizes the balance between processing performance and dynamic power consumption, making the STM32F401CBU3 suitable for systems that need deterministic behavior without the resource demands of a higher-end application processor.

Typical applications include industrial sensor aggregation, compact motor and process controllers, medical monitoring equipment, building automation modules, and portable diagnostic instruments. Communication interfaces can connect the MCU to transceivers, sensors, display controllers, and isolated interface circuits, while the 84 MHz processing rate supports responsive control loops and moderate protocol traffic.

PCB design should preserve the manufacturer’s recommended decoupling, exposed-pad, and thermal-via layout. Place power and ground connections carefully, route sensitive inputs away from high-current paths, and validate the final board across the intended voltage and temperature range. Firmware and peripheral configuration should also be checked against the exact package variant before production release.

This product page combines the STM32F401CBU3 specifications, package guidance, application context, and same-package replacement options in a form intended for straightforward engineering evaluation and sourcing decisions.

Аналоги без доработки для STM32F401CBU3 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с STM32F401CBU3 (тот же форм-фактор и посадочное место) — отличается по Package, Flash Memory, Flash Organization, Product Type, Core.

STMicroelectronics
Package: 48-pin UFQFPN, 7 x 7 mm
Product Type: 32-bit microcontroller MCU
Сравнить с STM32F401CBU3 →
STMicroelectronics
Package: 48-UFQFPN (7 x 7 mm)
Flash Memory: 256 KB
Flash Organization: 256K x 8
Сравнить с STM32F401CBU3 →
STMicroelectronics
Package: UFQFPN-48 (7x7 mm)
Flash Memory: 256 KB
Core: ARM Cortex-M4 with FPU
Сравнить с STM32F401CBU3 →

STM32F401CBU6

✅ Прямая замена ⚠️ Характеристики не проверены
STMicroelectronics
📦 UFQFPN-48 (7x7 mm)
32-bit microcontroller MCU · STMicroelectronics · STM32F4 · STM32F401 high-performance access line · Arm Cortex-M4 · 32-bit · 84 MHz · Single precision

Уточнить цену

Открыть даташит →

STM32F401CCU3

✅ Прямая замена ⚠️ Характеристики не проверены
📦 UFQFPN-48 (7x7 mm)
Flash increases from 128 KB to 256 KB, a 100% increase; CPU frequency and 85 °C temperature grade remain unchanged.

📋 Справочный аналог (нет в каталоге)

STM32F401CCU6

✅ Прямая замена ⚠️ Характеристики не проверены
STMicroelectronics
📦 UFQFPN-48 (7x7 mm)
32-bit ARM Cortex-M4 microcontroller · Arm Cortex-M4 with DSP and FPU · 84 MHz · 105 DMIPS · 256 KB · 256K x 8 · 64 KB · 11 timers

Уточнить цену

Открыть даташит →

STM32F401CCU6TR

✅ Прямая замена
📦 UFQFPN-48 (7x7 mm)
Flash increases from 128 KB to 256 KB, a 100% increase, with a 105 °C upper temperature grade and tape-and-reel ordering.

📋 Справочный аналог (нет в каталоге)

STM32F401CEU3

✅ Прямая замена ⚠️ Характеристики не проверены
📦 UFQFPN-48 (7x7 mm)
Flash increases from 128 KB to 512 KB, a 300% increase, while the 85 °C upper temperature grade remains unchanged.

📋 Справочный аналог (нет в каталоге)

STM32F401CEU6

✅ Прямая замена ⚠️ Характеристики не проверены
STMicroelectronics
📦 UFQFPN-48 (7x7 mm)
ARM Cortex-M4 with FPU · 84 MHz · 256 KB · 64 KB · 1.7 V to 3.6 V · UFQFPN-48 (7x7 mm) · -40C to +85C · 36

Уточнить цену

Открыть даташит →

STM32F401CBU3 Максимальные параметры и электрические характеристики

Product Type 32-bit ARM Cortex-M4 microcontroller
CPU Core Arm Cortex-M4 with DSP and FPU
Maximum CPU Frequency 84 MHz
Instruction Set 32-bit ARM Thumb
Flash Memory 128 KB
Flash Organization 128K x 8 bits
Рабочее напряжение питания 1.7 V to 3.6 V
Nominal Supply Options 1.8 V, 2.5 V, or 3.3 V
Temperature Range -40 °C to 85 °C or -40 °C to 105 °C
Корпус 48-pin UFQFPN, 7 mm x 7 mm
Package Type Surface-mount UFQFPN with exposed pad
Тип монтажа Surface Mount
Peripheral Class DSP and floating-point unit
Product Family STM32F4 Dynamic Efficiency Line

Руководство по цоколевке STM32F401CBU3 в корпусе surface-mount ufqfpn with exposed pad

Цоколевка для STM32F401CBU3 (корпус surface-mount ufqfpn with exposed pad). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса surface-mount ufqfpn with exposed pad для STM32F401CBU3

Нет подробных данных о распиновке для STM32F401CBU3.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

STM32F401CBU3 подходит для 6 применениеs: Industrial Sensor Hub, Medical Monitoring Instrument, Compact Process Controller, Portable Diagnostic Device, Building Automation Module, Connected Control Node.

🏭

Industrial Sensor Hub

The STM32F401CBU3 fits an industrial sensor hub that combines periodic acquisition, local filtering, and deterministic control in a compact 48-pin package. Its 84 MHz Cortex-M4 core executes DSP and floating-point instructions without requiring a separate processor, while the 128 KB embedded Flash stores application firmware and configuration logic. The 1.7 V to 3.6 V operating range supports 1.8 V, 2.5 V, and 3.3 V system rails. A sensor interface can feed measurements into the MCU for threshold evaluation, logging, and communication, while the 7 mm by 7 mm UFQFPN outline preserves board area in DIN-rail or embedded equipment. The principal design consideration is thermal exposure: select the 85 °C grade only when the enclosure remains within its rated ambient range, or use the 105 °C CBU6 alternative for hotter installations.

💊

Medical Monitoring Instrument

The STM32F401CBU3 is appropriate for compact medical monitoring equipment that performs sensor conditioning in real time and maintains control over an instrument bus or display interface. Its 84 MHz Cortex-M4 processor includes DSP and floating-point support, allowing filtering and scaling calculations to run locally without slowing the main control loop. The 128 KB Flash footprint is suitable for application firmware, calibration tables, and communication protocols when no large stored data set is required. Operating from 1.7 V to 3.6 V also permits use of low-voltage sensor and communication circuits. Medical-product designers must add the required isolation, protection, creepage, and regulatory controls at the system level. The MCU should remain within its specified 85 °C maximum for the CBU3 suffix, making the CBU6 grade preferable where elevated internal temperatures are expected.

⚡

Compact Process Controller

The STM32F401CBU3 suits compact process controllers that must execute control calculations, monitor inputs, and coordinate outputs within a small embedded enclosure. At 84 MHz, the Cortex-M4 core provides deterministic responsiveness for proportional, integral, derivative, and filtering routines, while its DSP and FPU capabilities reduce the computational overhead of signal-oriented control functions. The 128 KB of embedded Flash accommodates a typical embedded control application without external program storage. With its 48-pin UFQFPN footprint, the device supports compact layouts, and the exposed pad can improve thermal performance when connected to copper through the manufacturer-recommended via pattern. Supply design should use a regulated rail within 1.7 V to 3.6 V, with local decoupling placed at the power pins. If enclosure temperatures can exceed 85 °C, the CBU6 replacement offers the same footprint with a 105 °C grade.

📱

Portable Diagnostic Device

The STM32F401CBU3 supports portable diagnostic devices where low-voltage operation, compact dimensions, and real-time signal processing are important. The Cortex-M4 processor can execute DSP instructions and floating-point calculations for sensor compensation, waveform analysis, and measurement control at up to 84 MHz. Its 128 KB Flash capacity is suitable for firmware, calibration coefficients, and fixed protocol data, while the 1.7 V minimum supply voltage accommodates compact battery-derived rails after suitable regulation. The 7 mm by 7 mm package limits occupied board area and can suit handheld or wearable-style instrument enclosures. Developers should calculate the regulator’s efficiency and thermal behavior across the complete battery range, while keeping sensitive analog routing separate from digital and switching paths. The standard CBU3 grade is appropriate for controlled handheld temperatures; a 105 °C-rated family member is safer for devices exposed to elevated internal temperatures.

🧩

Building Automation Module

The STM32F401CBU3 can serve as the local controller in a building automation module that supervises environmental inputs, drives outputs, and reports status over a serial or network interface. Its 84 MHz Cortex-M4 core provides more than enough throughput for protocol management, scheduling logic, diagnostics, and real-time control, while the 128 KB embedded Flash supports a compact application without a companion program-memory device. The compact UFQFPN-48 package is well suited to wall modules and DIN-rail products where every millimeter matters. A low-voltage 1.8 V, 2.5 V, or 3.3 V rail can simplify integration with sensors and transceiver circuitry, provided the power design maintains the MCU’s operating limits. Because building equipment may operate in warm enclosures, system thermal qualification should confirm whether the 85 °C CBU3 grade is adequate or whether the 105 °C CBU6 option should be selected.

🌐

Connected Control Node

The STM32F401CBU3 is a strong core for a connected control node that gathers local data, performs calculations, and forwards commands between sensors and a supervisory system. Its 84 MHz Cortex-M4 core with DSP and FPU support handles protocol overhead, filtering, and control tasks concurrently, while the 128 KB Flash footprint is appropriate for compact firmware without external storage. The 48-pin UFQFPN package offers a practical balance between pin access and board area, and its exposed pad supports heat spreading when the PCB provides adequate copper. Communications isolation, termination, and surge protection must be implemented according to the external interface requirements rather than assumed to be part of the MCU. Power architecture should account for the difference between the 1.7 V minimum operating voltage and the voltage required by attached interfaces. For deployed equipment with high internal ambient temperature, use a 105 °C-rated same-package option.

What is the operating voltage of STM32F401CBU3?
The STM32F401CBU3 operates from 1.7 V to 3.6 V. According to the STMicroelectronics STM32F401CB documentation, the device supports nominal 1.8 V, 2.5 V, and 3.3 V supply arrangements, allowing the MCU to fit common embedded-system power rails. Designers should maintain the documented minimum operating voltage across temperature and place local bypass capacitance close to the supply pins.
What are the key specifications of STM32F401CBU3 that engineers should know?
The STM32F401CBU3 combines an 84 MHz Arm Cortex-M4 core, 128 KB of Flash, DSP instructions, and a floating-point unit in a 48-pin 7 mm by 7 mm UFQFPN package. According to the STMicroelectronics STM32F401CB product page, it is part of the high-performance access line and the STM32 Dynamic Efficiency range. These specifications make it suitable for real-time control, embedded signal processing, and compact industrial or medical equipment.
Where can I download the STM32F401CBU3 datasheet PDF?
The STM32F401CBU3 datasheet and product resources can be reached through the official STM32F401CB product page at st.com. According to STMicroelectronics, that page provides the downloadable datasheet, device documentation, samples, and direct ordering information. Use the pin description table, electrical characteristics, and package drawings in the manufacturer documentation when assigning PCB nets and validating operating limits.
Where can I find the STM32F401CBU3 pinout?
The STM32F401CBU3 pinout is documented for its 48-pin UFQFPN package in the STMicroelectronics device documentation. Use the pin-description table and package drawing to map power, ground, reset, clock, boot, programming, and peripheral signals. The exposed thermal pad must also be handled according to the manufacturer’s land-pattern and soldering guidance rather than treated as an ordinary signal pin.
Is the STM32F401CBU3 the same as STM32F401CBU6?
No. The STM32F401CBU3 and STM32F401CBU6 share the same STM32F401CB device family, 128 KB Flash configuration, and 48-pin UFQFPN package, but their order-code suffixes represent different temperature grades. According to STMicroelectronics family data, the 3-grade is associated with the -40 °C to 85 °C range, while the 6-grade supports -40 °C to 105 °C. The higher-grade option is preferable when the ambient temperature can exceed 85 °C.
STM32F401CBU3 vs STM32F401CCU6TR - which is better for a compact controller?
The STM32F401CBU3 is preferable when the design needs 128 KB of Flash and a temperature grade covering -40 °C to 85 °C. The STM32F401CCU6TR provides 256 KB of Flash and a -40 °C to 105 °C grade in the same 48-pin UFQFPN package, making it the stronger choice for larger firmware or hotter environments. Both retain the 84 MHz Cortex-M4 architecture, but firmware size and thermal requirements should drive the decision.
When should I choose STM32F401CBU3 over STM32F401CCU6TR?
Choose the STM32F401CBU3 when 128 KB of Flash is sufficient, the product normally remains within -40 °C to 85 °C, and the lower-capacity variant is appropriate for the application. Choose the STM32F401CCU6TR when code growth requires 256 KB of Flash or when operation must extend to 105 °C. Both use the same package family, but memory headroom and environmental limits are the decisive engineering constraints.
What is the best drop-in replacement for STM32F401CBU3?
The closest same-footprint replacement depends on required memory and temperature rating. STM32F401CBU6 preserves the 128 KB Flash configuration and 48-pin UFQFPN footprint while raising the temperature grade to 105 °C. STM32F401CCU6 and STM32F401CCU6TR provide 256 KB of Flash in the same package, while STM32F401CEU3 offers a larger-memory alternative. Confirm pin functions, peripherals, firmware requirements, and qualification before release.
Can STM32F401CCU6TR replace STM32F401CBU3 on the same PCB?
Yes, STM32F401CCU6TR can serve as a same-package replacement when its additional Flash and wider temperature grade are acceptable. Both devices use the 48-pin UFQFPN format and belong to the STM32F401CB family. The replacement increases Flash from 128 KB to 256 KB and extends the upper temperature limit from 85 °C to 105 °C, but engineers should still verify boot configuration, peripheral use, clock setup, and production firmware assumptions.
What can replace STM32F401CBU3 without changing the footprint?
STM32F401CBU6, STM32F401CCU3, STM32F401CCU6, STM32F401CCU6TR, STM32F401CEU3, and STM32F401CEU6 are same-package STM32F401CB alternatives identified from the manufacturer’s family structure. Their key differences are Flash capacity and temperature grade. The CBU3 provides 128 KB and a 85 °C upper limit; the CBU6 retains 128 KB and reaches 105 °C, while CC and CE options increase memory. Firmware and environmental validation remain mandatory.
Is there an STM32F401CBU3 alternative from another manufacturer?
No verified cross-manufacturer drop-in alternative is established for the STM32F401CBU3. STMicroelectronics’s STM32F401CB family provides several same-package options, but MCU substitution across manufacturers requires matching the exact pin functions, peripheral set, clock architecture, memory map, startup code, and development ecosystem. Pin compatibility alone does not guarantee firmware compatibility. The same-brand family options are therefore the safer replacements for an existing UFQFPN layout.
Where can I buy STM32F401CBU3 online?
The STM32F401CBU3 can be requested through the Request a Quote form on this XAIPART page. The form is the appropriate route for current commercial terms, stock confirmation, lead time, and order quantities. The manufacturer’s STM32F401CB product page also provides direct order access, while the exact suffix STM32F401CBU3 should be retained because package, memory, and temperature-grade ordering codes are significant.
What is the lead time for STM32F401CBU3?
Current lead time for the STM32F401CBU3 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package form, production allocation, and regional logistics, so a general duration would not be reliable. For planning purposes, submit the required quantity and packaging preference on the quote form and use the returned schedule as the procurement baseline.
Is STM32F401CBU3 in stock?
Current inventory for STM32F401CBU3 must be checked through the Request a Quote form on this page. The manufacturer identifies the STM32F401CB device as active, while exact suffix availability can change with order size and packaging. Submit the required quantity and target delivery location to obtain the current availability confirmation rather than relying on a generic family-level stock statement.
Does STM32F401CBU3 need external memory for firmware storage?
The STM32F401CBU3 includes 128 KB of embedded Flash for firmware storage, so it does not require external Flash when the application fits within that capacity. According to the STMicroelectronics product listing, the memory is organized as 128K by 8 bits. Designers should account for bootloader space, application code, data constants, and update requirements; if those exceed the device budget, an MCU with larger embedded Flash is generally preferable to adding external storage.
What development tools are compatible with STM32F401CBU3?
The STM32F401CBU3 is programmed and debugged through the STMicroelectronics development ecosystem for its Cortex-M4 core and STM32F4 family. The device-specific configuration must include the 128 KB Flash option and the correct 48-pin UFQFPN variant. Use the STMicroelectronics programming and debug hardware, boot configuration guidance, and device database entries for the exact order code to avoid programming or clock-setup mismatches.

Справочные инженерные данные для STM32F401CBU3 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the STM32F401CBU3 when an application needs an 84 MHz Cortex-M4 core, 128 KB of embedded Flash, and a package that fits a compact 48-pin UFQFPN layout. It is a suitable standard-temperature choice for products whose internal operating temperature remains at or below 85 °C. Select STM32F401CBU6 when the same memory capacity is required but the enclosure can reach 105 °C. Choose STM32F401CCU3 for twice the Flash without extending the temperature grade, and STM32F401CCU6TR for both extra memory and a 105 °C grade. The STM32F401CEU3 and STM32F401CEU6 are appropriate when application growth requires 512 KB of Flash. All listed choices retain the same package family and Cortex-M4 architecture, but memory configuration, temperature margin, packaging form, and firmware validation must be reviewed before substitution.

Сравнение с аналогами

Параметр Этот товар STM32F401CBU6 STM32F401CCU3 STM32F401CCU6 STM32F401CCU6TR STM32F401CEU3
Package UFQFPN-48 (7x7 mm) UFQFPN-48 (7x7 mm) UFQFPN-48 (7x7 mm) UFQFPN-48 (7x7 mm) UFQFPN-48 (7x7 mm) UFQFPN-48 (7x7 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU
Maximum CPU Frequency 84 MHz 84 MHz 84 MHz 84 MHz 84 MHz 84 MHz
Flash Memory 128 KB 128 KB 256 KB 256 KB 256 KB 512 KB
Operating Supply Voltage 1.7 V to 3.6 V 1.7 V to 3.6 V 1.7 V to 3.6 V 1.7 V to 3.6 V 1.7 V to 3.6 V 1.7 V to 3.6 V
Upper Operating Temperature 85 °C 105 °C 85 °C 105 °C 105 °C 85 °C
Programming and Debug STM32F4 Cortex-M4 programming and debug interface STM32F4 Cortex-M4 programming and debug interface STM32F4 Cortex-M4 programming and debug interface STM32F4 Cortex-M4 programming and debug interface STM32F4 Cortex-M4 programming and debug interface STM32F4 Cortex-M4 programming and debug interface
Special Feature Dynamic Efficiency MCU with 128 KB Flash 105 °C temperature grade 256 KB Flash 256 KB Flash and 105 °C temperature grade 256 KB Flash, 105 °C temperature grade, tape-and-reel format 512 KB Flash

Ключевые отличия

  • Maintains the same 128 KB memory configuration while extending temperature capability (против STM32F401CBU6)
  • Provides twice the embedded Flash without changing the package footprint (против STM32F401CCU3)
  • Combines additional Flash with wider temperature operation (против STM32F401CCU6TR)
  • Offers the largest same-package firmware headroom for growing applications (против STM32F401CEU3)

Заметки по проектированию

Implement the manufacturer’s UFQFPN-48 land pattern and exposed-pad connection exactly. Place the input and output decoupling capacitors close to their associated power pins, keep the exposed-pad region free of unintended shorts, and use a thermal-via pattern sized for the board copper and enclosure heat flow. Avoid placing sensitive analog traces beneath noisy digital or power-conversion paths.

Design the supply rail to remain between 1.7 V and 3.6 V across temperature, load, and startup. Confirm the voltage at the MCU pins rather than relying only on the regulator output. Stable local bypass capacitance, controlled power-up timing, and correct brownout behavior are essential for reliable Cortex-M4 operation and repeatable peripheral initialization.

Validate the assembled device at the maximum intended ambient temperature and worst-case processing activity. The CBU3 order code is associated with an 85 °C upper operating limit, so internal enclosure heating can leave insufficient margin even when the external ambient appears acceptable. Choose a 105 °C-rated same-package variant if thermal analysis shows operation above 85 °C.

Do not treat the B, C, and E memory variants as interchangeable without reviewing firmware size and startup assumptions, and do not confuse the 3 and 6 temperature-grade suffixes. When changing to a larger Flash device, confirm linker placement, option-byte behavior, boot configuration, and production programming procedures. A same-package replacement still requires board-level and firmware validation.

Route clocks and communication signals away from switching nodes and high-current output paths. Use a continuous ground reference beneath and around the device, minimize loop area for clock and return paths, and observe the manufacturer’s external-component recommendations for oscillator and bus speeds. Validate timing with the production peripheral configuration rather than relying on generic STM32 examples.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page identifies STM32F401CB as an active device. Specific environmental and material compliance declarations for the exact STM32F401CBU3 order code should be confirmed in the current manufacturer documentation or declaration records.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

STM32F401CBU3 STM32F401CBU3 datasheet STM32F401CBU3 datasheet pdf STM32F401CBU3 pinout STM32F401CBU3 equivalent STM32F401CBU3 replacement STM32F401CBU3 footprint STM32F401CBU3 price STM32F401CBU3 stock STMicroelectronics STM32F401CBU3 STM32F401CBU3 vs STM32F401CBU6 STM32F401CBU3 UFQFPN-48 84MHz 128KB Cortex-M4 UFQFPN-48 STM32F401CBU3 industrial controller

Связанные компоненты & термины

STMicroelectronics STM32F401CBU3 STM32F401CB STM32F401CBU6 STM32F401CCU3 STM32F401CCU6 STM32F401CCU6TR STM32F401CEU3 STM32F401CEU6 Arm Cortex-M4 ARM Thumb instruction set microcontroller embedded processor system-on-chip STM32F4 Dynamic Efficiency Line DSP floating-point unit UFQFPN-48 QFN package family surface-mount package embedded Flash memory 1.7 V to 3.6 V power supply industrial control medical monitoring sensor hub
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ