STM32F767ZGT6 - 216MHz 1MB Cortex-M7 MCU | STMicroelectronics
Артикул: STM32F767ZGT6 ✓ АктивенSTM32F767ZGT6 Обзор
An Arm Cortex-M7 microcontroller is a 32-bit reduced-instruction-set-computing core integrated with memory and peripherals on a single package. STM32F7 devices belong to the broader hierarchy of embedded processor, microcontroller, semiconductor, and power-management component categories. The STM32F767 series combines high CPU performance with hardware acceleration and extensive connectivity, allowing it to function as the central controller for industrial equipment, networking equipment, audio systems, test instruments, and embedded automation platforms.
Key features include an operating frequency of up to 216 MHz, 1 MB of Flash program memory, 512 KB of SRAM, and a 144-pin LQFP package. The Cortex-M7 architecture supports floating-point and DSP-oriented workloads, while the STM32F7 family is designed for applications requiring more processing capability than general-purpose entry-level MCUs. The 20 mm by 20 mm LQFP package also exposes a large number of I/O pins for external memory, communication interfaces, sensors, actuators, and human-machine interface circuitry.
The STM32F767 family combines a high-performance CPU with extensive embedded resources and communication capabilities. Its family-level specification covers devices with up to 2 MB of Flash memory, while the exact STM32F767ZGT6 ordering code identifies the 1 MB configuration. This distinction is important when designing memory maps, bootloaders, and firmware-update procedures because application code, linker scripts, and external storage requirements must match the selected density rather than the maximum family capacity.
Typical applications include industrial automation controllers, networked embedded equipment, audio and digital signal-processing systems, motor and motion control, test and measurement instruments, and communications gateways. The 216 MHz Cortex-M7 core is especially relevant when control loops, communication stacks, and data-processing tasks must execute concurrently. Its 1 MB Flash and 512 KB RAM provide useful local storage and working memory for these designs.
PCB design should preserve clean supply routing, adequate decoupling near the device, and controlled clock and signal-integrity layouts. The LQFP package is inspectable and reworkable, but its 144 leads require careful fanout and paste control. Designers must also confirm the exact pin configuration, power requirements, boot interfaces, and peripheral assignments in the manufacturer datasheet before committing a new PCB layout.
This page consolidates the verified manufacturer and distributor information, distinguishes exact STM32F767ZGT6 facts from family-level specifications, and provides same-package alternatives, application guidance, and selection criteria. It also records unavailable electrical and lifecycle details explicitly instead of presenting unverified values as production-ready design data.
Аналоги без доработки для STM32F767ZGT6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32F767ZGT6 (тот же форм-фактор и посадочное место) — отличается по Package, Core, Operating Temperature, SRAM, Flash Memory.
STM32F767ZIT6
✅ Прямая заменаУточнить цену
Открыть даташит →STM32F765ZGT6
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →STM32F769ZGT6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32F768ZGT6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32H743ZGT6
✅ Прямая заменаУточнить цену
Открыть даташит →STM32F767ZGT6 Максимальные параметры и электрические характеристики
| Product Type | 32-bit Arm Cortex-M7 microcontroller |
| CPU Architecture | Arm Cortex-M7 with FPU and DSP capability |
| Maximum CPU Frequency | 216 MHz |
| Program Memory | 1 MB Flash |
| RAM | 512 KB |
| Instruction Set | 32-bit RISC |
| Peak Compute Performance | 462 DMIPS at family level |
| Корпус | 144-lead LQFP, 20 mm x 20 mm |
| Тип монтажа | Surface mount |
| Статус RoHS | unknown |
| REACH Status | unknown |
Руководство по цоколевке STM32F767ZGT6 в корпусе 144-lead lqfp, 20 mm x 20 mm
Цоколевка для STM32F767ZGT6 (корпус 144-lead lqfp, 20 mm x 20 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для STM32F767ZGT6.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
STM32F767ZGT6 подходит для 6 применениеs: Industrial Automation Controller, Industrial Communication Gateway, Audio and Digital Signal Processing, Motor and Motion Control, Test and Measurement Instrument, Embedded Networking Equipment.
Industrial Automation Controller
The STM32F767ZGT6 fits industrial automation controllers that combine deterministic control with communication and supervisory processing. Its 216 MHz Arm Cortex-M7 core and 462 DMIPS family-level performance provide headroom for executing control algorithms alongside protocol handling, diagnostics, and operator-interface updates. The 1 MB Flash and 512 KB RAM allow meaningful local code and working-data capacity without requiring external memory for every task. With 144 LQFP leads, the device offers extensive connectivity for sensors, actuators, field-bus transceivers, and local human-machine interfaces. The principal design requirement is confirming that every required peripheral and voltage domain in the production design appears in the exact STM32F767ZGT6 datasheet.
Рекомендуется
Industrial Communication Gateway
The STM32F767ZGT6 is well suited to communications gateways that must manage several protocol tasks and real-time data movement. Its 216 MHz Cortex-M7 core can process network traffic and application logic, while 512 KB of RAM provides substantial working space for buffers and protocol stacks. The 1 MB Flash capacity supports embedded firmware, configuration data, and update mechanisms at a practical size for an advanced 32-bit MCU. A 144-lead LQFP provides enough pins for high-speed communication interfaces, management signals, indicators, and isolated transceiver connections. Before finalizing the gateway design, engineers should verify the exact Ethernet, USB, serial, and auxiliary interface options and their pin assignments in the manufacturer documentation.
Рекомендуется
Audio and Digital Signal Processing
The STM32F767ZGT6 supports audio and digital signal-processing designs that benefit from the Cortex-M7 core's DSP and floating-point capability. The verified family documentation lists up to 462 DMIPS, and this exact device operates up to 216 MHz, enabling real-time filtering, mixing, modulation, or control alongside data acquisition. Its 1 MB Flash accommodates substantial embedded algorithms, while 512 KB of RAM can hold sample buffers and working data. The 144-lead package gives designers access to a broad I/O selection for audio converters, memory devices, control signals, and digital interfaces. Actual signal-chain suitability depends on the selected converters, sampling rates, and required interfaces, all of which must be confirmed against the exact datasheet.
Рекомендуется
Motor and Motion Control
The STM32F767ZGT6 can serve as the central controller in motor-drive and motion-control equipment where deterministic computation, multiple I/O channels, and embedded memory are valuable. Its 216 MHz Cortex-M7 performance supports fast control-loop execution, signal conditioning, and supervisory logic, while the 462 DMIPS family-level figure indicates substantial processing headroom. The 1 MB Flash and 512 KB RAM are suitable for control code, parameter storage, and motion-state data. The 144 LQFP footprint provides a high pin count for pulse-width-modulated outputs, encoder interfaces, position sensors, communications, and protection signals. Power-stage design and safety behavior remain separate from MCU selection, and engineers must verify the exact timer, ADC, and pin assignments for the target motor-control topology.
Рекомендуется
Test and Measurement Instrument
The STM32F767ZGT6 fits high-performance embedded test and measurement systems that combine real-time acquisition, signal processing, and user-facing control. The 216 MHz Cortex-M7 core supports DSP-oriented analysis, while 1 MB Flash and 512 KB RAM provide sufficient resources for firmware, calibration data, and acquisition buffers. Its 144 LQFP package offers a large I/O budget for precision converters, reference sources, communication ports, displays, and front-panel controls. The device can therefore serve as the main controller in programmable instrumentation or an embedded measurement subsystem when the required converters and interfaces are supported. Layout should keep analog and digital return paths controlled, isolate sensitive converter grounds appropriately, and follow the manufacturer's decoupling and high-speed layout guidance.
Рекомендуется
Embedded Networking Equipment
The STM32F767ZGT6 is applicable to embedded routers, protocol converters, and network-access equipment where a high-performance 32-bit core is needed beside network interfaces. Operating at up to 216 MHz, the Cortex-M7 can manage packet handling, protocol translation, configuration, and monitoring concurrently. The 1 MB Flash and 512 KB RAM provide a practical balance for embedded firmware and working buffers, while the 144-lead package exposes the pins needed for communications transceivers, management interfaces, status indicators, and storage. A production network design must verify the exact supported Ethernet, USB, and serial peripherals for this ordering code and evaluate PHY isolation, clocking, impedance-controlled routing, and thermal performance. These interface checks are essential because family membership alone does not guarantee identical peripheral availability.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32F767ZGT6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32F767ZIT6 | STM32F765ZGT6 | STM32F769ZGT6 | STM32F768ZGT6 | STM32H743ZGT6 |
|---|---|---|---|---|---|---|
| CPU Core | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC |
| Maximum CPU Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 480 MHz |
| Package | LQFP-144 (20x20 mm) | LQFP-144 - same package | LQFP-144 - same package | LQFP-144 - same package | LQFP-144 - same package | LQFP-144 - same package |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
Ключевые отличия
- Exact 1 MB Flash configuration (против STM32H743ZGT6)
- Lower clock-to-pin-transition risk within the STM32F7 family (против STM32H743ZGT6)
- Broad, documented pin-compatible migration family (против STM32F767ZIT6)
Заметки по проектированию
Confirm the exact STM32F767ZGT6 supply rails, voltage domains, decoupling values, and regulator configuration in the manufacturer datasheet before layout release. The verified data identifies the 144-lead LQFP package and 216 MHz Cortex-M7 architecture but does not provide the complete pin-level power table. In particular, do not assume that the STM32H743ZGT6 migration discussed by STMicroelectronics is electrically identical: its integrated LDO/SMPS behavior differs from the STM32F7 BYPASS_REG arrangement. Verify startup order, external component requirements, and brownout behavior for the actual schematic.
Route all 144 LQFP leads according to the manufacturer land pattern and preserve solder-paste control across the fine-pitch perimeter. Place required input and bypass capacitors close to their associated pins using the shortest possible current loops, while keeping switching or high-current return paths away from sensitive clock and communication nets. Because the supplied verified data does not contain a complete pin map, do not assign capacitor, clock, boot, or communication connections from memory. Use the official datasheet pinout and PCB guidelines as the controlling references for the production board.
Plan the board around the STM32F767ZGT6's 20 mm by 20 mm LQFP footprint and its high pin count rather than treating it as a low-pin-density MCU. Check escape routing for every required interface against the actual pin assignment, especially clocks, communication signals, analog inputs, and debug functions. If evaluating STM32H743ZGT6 as a footprint-compatible migration, perform a pin-by-pin comparison for signal direction, analog compatibility, default states, and boot behavior. Physical pin compatibility alone does not guarantee that an existing PCB operates safely without component or firmware changes.
Do not select a replacement solely because its processor is also an Arm Cortex-M7 or because a distributor lists it as an equivalent. The STM32F767ZGT6 has a verified 216 MHz rating, 1 MB Flash, and 512 KB RAM, but adjacent devices can differ in memory density, peripheral mix, temperature grade, power architecture, and software requirements. Validate the linker configuration, boot sequence, clock initialization, interrupt vector table, peripheral instances, and all timing-sensitive drivers. For cross-brand alternatives, treat the candidate as a redesign unless complete electrical and pin compatibility is independently documented.
Информация о соответствии
The verified manufacturer and distributor results did not provide definitive compliance declarations for this exact ordering code. Compliance fields remain unknown rather than being inferred from general STM32 family practices.
