STM32G4A1RET6 - 170MHz Arm Cortex-M4F MCU | STMicroelectronics
Артикул: STM32G4A1RET6 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.65 | $76,50 |
| 100 | $6.8 | $680,00 |
| 500 | $6.12 | $3.060,00 |
| 1.000 | $5.44 | $5.440,00 |
STM32G4A1RET6 Обзор
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32G4A1RET6 belongs to the STM32G4 family, which is optimized for mixed-signal applications requiring high-resolution timers, fast ADCs, and advanced analog features. This MCU sits within the broader hierarchy of embedded processors, bridging general-purpose microcontrollers and digital signal processors (DSPs) with its FPU and DSP instructions.
Key features include a 170 MHz Arm Cortex-M4F core with DSP instructions and FPU, 512 KB of flash memory, and 96 KB of SRAM. It integrates a 12-bit ADC with hardware oversampling (up to 16-bit resolution), two 12-bit DACs, three fast comparators, and operational amplifiers. The device also includes advanced motor-control timers, a USB Type-C Power Delivery controller, and a CAN-FD interface. These features enable precise real-time control and efficient signal processing in demanding applications.
The STM32G4A1RET6 is built on a high-performance architecture with a nested vectored interrupt controller (NVIC) and a memory protection unit (MPU). It supports a wide supply voltage range of 1.71V to 3.6V and operates over a temperature range of -40°C to +85°C. The device includes multiple low-power modes, including Sleep, Stop, and Standby, to optimize energy consumption. Its advanced analog peripherals are designed to work seamlessly with the digital core, reducing external component count and system cost.
Typical applications include field-oriented control (FOC) of brushless DC motors, digital power supplies (e.g., LLC converters), solar inverters, and industrial sensors. The high-resolution timers (up to 184 ps resolution) and fast ADCs make it ideal for power conversion loops requiring high bandwidth. The USB Type-C PD controller simplifies implementation of power delivery in consumer and industrial devices.
When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF bulk capacitor. For analog performance, use a separate VDDA supply with a ferrite bead to isolate digital noise. The internal reference voltage (VREFINT) can be used for ADC calibration, but for higher accuracy, an external reference is recommended.
Аналоги без доработки для STM32G4A1RET6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32G4A1RET6 (тот же форм-фактор и посадочное место) — отличается по Communication Interfaces, Core, Flash Memory, Operating Temperature Range, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
STM32G4A1REI6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32G4A1REJ6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32G431RET6
⚡ Тот же корпус ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32G474RET6
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$8.25 / шт.
Открыть даташит →STM32G4A1RET6 Максимальные параметры и электрические характеристики
| Core | Arm Cortex-M4F with FPU |
| Максимальная тактовая частота | 170 MHz |
| Flash Memory | 512 KB |
| SRAM | 96 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Диапазон рабочих температур | -40C to +85C |
| Корпус | LQFP-64 (10x10 mm) |
| GPIO Pins | 51 |
| ADC Resolution | 12-bit (up to 16-bit with oversampling) |
| ADC Channels | 23 |
| DAC Resolution | 12-bit |
| DAC Channels | 2 |
| Timers | Advanced motor-control timers, high-resolution timers |
| Communication Interfaces | I2C, SPI, UART, CAN-FD, USB Type-C PD |
| DMA Channels | 16 |
| Статус RoHS | Compliant |
Конфигурация выводов STM32G4A1RET6
| Контакт 1 | VBAT — Battery backup supply |
| Контакт 2 | PC13 — GPIO / RTC |
| Контакт 3 | PC14 — GPIO / OSC32_IN |
| Контакт 4 | PC15 — GPIO / OSC32_OUT |
| Контакт 5 | PF0 — GPIO |
| Контакт 6 | PF1 — GPIO |
| Контакт 7 | NRST — Reset |
| Контакт 8 | VDD — Digital power supply |
| Контакт 9 | VSS — Ground |
| Контакт 10 | VDDA — Analog power supply |
| Контакт 11 | PA0 — GPIO / ADC |
| Контакт 12 | PA1 — GPIO / ADC |
| Контакт 13 | PA2 — GPIO / USART |
| Контакт 14 | PA3 — GPIO / USART |
| Контакт 15 | PA4 — GPIO / DAC |
| Контакт 16 | PA5 — GPIO / DAC |
| Контакт 17 | PA6 — GPIO / TIM |
| Контакт 18 | PA7 — GPIO / TIM |
| Контакт 19 | PA8 — GPIO / USB |
| Контакт 20 | PA9 — GPIO / USB |
| Контакт 21 | PA10 — GPIO / USART |
| Контакт 22 | PA11 — GPIO / USB |
| Контакт 23 | PA12 — GPIO / USB |
| Контакт 24 | PA13 — SWDIO |
| Контакт 25 | PA14 — SWCLK |
| Контакт 26 | PA15 — GPIO / JTDI |
| Контакт 27 | PB0 — GPIO / ADC |
| Контакт 28 | PB1 — GPIO / ADC |
| Контакт 29 | PB2 — GPIO / BOOT1 |
| Контакт 30 | PB3 — GPIO / JTDO |
| Контакт 31 | PB4 — GPIO / NJTRST |
| Контакт 32 | PB5 — GPIO / I2C |
| Контакт 33 | PB6 — GPIO / I2C |
| Контакт 34 | PB7 — GPIO / I2C |
| Контакт 35 | PB8 — GPIO / CAN |
| Контакт 36 | PB9 — GPIO / CAN |
| Контакт 37 | PB10 — GPIO / SPI |
| Контакт 38 | PB11 — GPIO / SPI |
| Контакт 39 | PB12 — GPIO / SPI |
| Контакт 40 | PB13 — GPIO / SPI |
| Контакт 41 | PB14 — GPIO / TIM |
| Контакт 42 | PB15 — GPIO / TIM |
| Контакт 43 | PC0 — GPIO / ADC |
| Контакт 44 | PC1 — GPIO / ADC |
| Контакт 45 | PC2 — GPIO / ADC |
| Контакт 46 | PC3 — GPIO / ADC |
| Контакт 47 | PC4 — GPIO / ADC |
| Контакт 48 | PC5 — GPIO / ADC |
| Контакт 49 | PC6 — GPIO / TIM |
| Контакт 50 | PC7 — GPIO / TIM |
| Контакт 51 | PC8 — GPIO / TIM |
| Контакт 52 | PC9 — GPIO / TIM |
| Контакт 53 | PD0 — GPIO / OSC_IN |
| Контакт 54 | PD1 — GPIO / OSC_OUT |
| Контакт 55 | PD2 — GPIO |
| Контакт 56 | PD3 — GPIO |
| Контакт 57 | PD4 — GPIO |
| Контакт 58 | PD5 — GPIO |
| Контакт 59 | PD6 — GPIO |
| Контакт 60 | PD7 — GPIO |
| Контакт 61 | VDD — Digital power supply |
| Контакт 62 | VSS — Ground |
| Контакт 63 | PE0 — GPIO |
| Контакт 64 | PE1 — GPIO |
Типичное применение
STM32G4A1RET6 подходит для 6 применениеs: Field-Oriented Control (FOC) of Brushless DC Motors, Digital Power Supplies (LLC Converters), Solar Inverters, Industrial Sensors and Condition Monitoring, USB Type-C Power Delivery Adapters, Robotics and Drones.
Field-Oriented Control (FOC) of Brushless DC Motors
The STM32G4A1RET6 is ideal for FOC of BLDC motors due to its high-resolution timers (up to 184 ps) and fast 12-bit ADCs (up to 16-bit with oversampling). The advanced motor-control timers generate PWM signals with precise duty cycles, while the ADCs sample phase currents synchronously. The FPU accelerates the Clarke/Park transforms and PI controllers, enabling efficient, low-torque-ripple motor drives. In a typical application, the MCU reads current sensors via the ADC, computes the rotor position using Hall sensors or encoders, and updates PWM outputs at a 20 kHz loop rate. The integrated comparators provide overcurrent protection with minimal latency. Compared to general-purpose MCUs, the STM32G4A1RET6 reduces BOM cost by integrating analog peripherals and offers deterministic timing for high-bandwidth control loops.
Рекомендуется
Digital Power Supplies (LLC Converters)
The STM32G4A1RET6 excels in digital power conversion, particularly LLC resonant converters. Its high-resolution timers generate PWM with up to 184 ps resolution, enabling precise frequency modulation for zero-voltage switching (ZVS). The fast ADCs sample output voltage and current at high rates, allowing the control loop to respond quickly to load transients. The FPU handles complex control algorithms, such as PID and state-space averaging, in real time. In a typical LLC converter, the MCU reads the output voltage via a resistor divider, compares it to a reference, and adjusts the switching frequency to maintain regulation. The integrated comparators can implement burst-mode protection. Compared to analog controllers, the STM32G4A1RET6 offers flexibility in firmware updates and advanced monitoring features, such as telemetry and fault logging.
Рекомендуется
Solar Inverters
The STM32G4A1RET6 is well-suited for solar inverters, where it manages maximum power point tracking (MPPT) and grid synchronization. The high-resolution timers generate PWM for the DC-DC boost converter and the DC-AC inverter stage. The fast ADCs sample solar panel voltage and current to implement MPPT algorithms, such as perturb and observe. The FPU accelerates the computation of power and duty cycles. The CAN-FD interface allows communication with other system components, such as battery management systems. In a typical solar inverter, the MCU runs a control loop at 20 kHz, adjusting the duty cycle to extract maximum power from the panels. The integrated comparators provide overcurrent protection. Compared to other MCUs, the STM32G4A1RET6 offers a good balance of performance, analog integration, and cost for residential and commercial inverters.
Рекомендуется
Industrial Sensors and Condition Monitoring
The STM32G4A1RET6 is used in industrial sensors for condition monitoring, such as vibration analysis and temperature sensing. Its 12-bit ADC with oversampling can achieve 16-bit resolution, enabling precise measurement of analog signals. The FPU processes FFT algorithms for vibration analysis, detecting anomalies in rotating machinery. The multiple communication interfaces (I2C, SPI, UART, CAN-FD) allow the sensor to interface with PLCs and industrial networks. In a typical application, the MCU samples an accelerometer via the ADC, performs FFT in real time, and transmits the spectrum over CAN-FD. The low-power modes extend battery life in wireless sensors. Compared to discrete solutions, the STM32G4A1RET6 integrates signal conditioning and processing, reducing board space and cost.
Рекомендуется
USB Type-C Power Delivery Adapters
The STM32G4A1RET6 integrates a USB Type-C Power Delivery (PD) controller, making it ideal for USB-C adapters and chargers. The MCU handles the PD negotiation protocol, managing voltage and current requests from the sink device. The high-resolution timers can control the power stage for efficient conversion. The integrated DAC and comparators enable voltage and current monitoring. In a typical USB-C adapter, the MCU communicates with the sink over the CC lines, negotiates a power profile (e.g., 20V/5A), and adjusts the output accordingly. The USB PD controller simplifies the design by eliminating the need for an external PD chip. Compared to dedicated PD controllers, the STM32G4A1RET6 offers flexibility for custom power profiles and additional features like telemetry.
Рекомендуется
Robotics and Drones
The STM32G4A1RET6 is used in robotics and drones for motor control, sensor fusion, and flight control. Its high-resolution timers drive brushless motors with precise speed control, while the FPU processes sensor data from IMUs and encoders. The multiple communication interfaces allow connection to GPS modules, radio transceivers, and other peripherals. In a typical drone, the MCU runs a control loop at 1 kHz, reading gyroscope and accelerometer data, computing attitude, and adjusting motor speeds. The low-power modes extend flight time. Compared to other MCUs, the STM32G4A1RET6 offers a good balance of performance, analog integration, and size, making it suitable for compact designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32G4A1RET6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32G4A1REI6 | STM32G4A1REJ6 | STM32G431RET6 | STM32G474RET6 |
|---|---|---|---|---|---|
| Package | LQFP-64 | UFBGA-64 | LQFP-64 | LQFP-64 | LQFP-64 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | Cortex-M4F @ 170 MHz | Cortex-M4F @ 170 MHz | Cortex-M4F @ 170 MHz | Cortex-M4F @ 170 MHz | Cortex-M4F @ 170 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 128 KB | 512 KB |
| SRAM | 96 KB | 96 KB | 96 KB | 32 KB | 128 KB |
| USB Type-C PD | Yes | Yes | Yes | No | No |
| Number of Comparators | 3 | 3 | 3 | 3 | 6 |
| Operating Temperature Range | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C |
Ключевые отличия
- Integrated USB Type-C Power Delivery controller (против STM32G431RET6)
- 512 KB flash memory (против STM32G431RET6)
- High-resolution timers with 184 ps resolution (против STM32G474RET6)
Заметки по проектированию
Decouple each VDD pin with a 100 nF ceramic capacitor placed as close as possible to the pin. Add a 4.7 uF bulk capacitor on the main supply. For VDDA, use a ferrite bead in series with the analog supply and a 1 uF capacitor to ground to reduce digital noise coupling into the ADC.
For the LQFP-64 package, ensure a solid ground plane under the MCU. Route high-speed signals (e.g., SPI, USB) with controlled impedance if needed. Keep analog traces short and away from digital switching signals. Use separate analog and digital ground planes connected at a single point.
Do not exceed the absolute maximum ratings: VDD max 3.6V, and any pin voltage must be within -0.3V to VDD+0.3V. Ensure the BOOT0 pin is properly configured to avoid accidental boot from system memory. For ADC accuracy, use an external voltage reference if the internal VREFINT is not sufficient.
Информация о соответствии
RoHS and REACH compliant per STMicroelectronics. Not AEC-Q100 qualified; for automotive, consider STM32G4A1REJ6 with extended temperature range.
