STM32L433RCT6 - Ultra-Low-Power ARM Cortex-M4 MCU | STMicroelectronics
Артикул: STM32L433RCT6 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.65 | $76,50 |
| 100 | $6.8 | $680,00 |
| 500 | $6.12 | $3.060,00 |
| 1.000 | $5.44 | $5.440,00 |
STM32L433RCT6 Обзор
What is an ARM Cortex-M4 microcontroller? It is a 32-bit processor core designed for embedded systems, offering a balance of performance, power efficiency, and rich peripheral integration. The Cortex-M4 includes a floating-point unit (FPU) and DSP instructions, making it suitable for signal processing and control applications. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and programmable peripherals on a single chip, enabling standalone operation in embedded designs.
Key features of the STM32L433RCT6 include an ultra-low-power mode with current consumption as low as 100 nA in standby mode, a 12-bit ADC with hardware oversampling, a 12-bit DAC, multiple communication interfaces (USART, SPI, I2C, USB), and a real-time clock (RTC). The device also integrates a flexible power management unit with multiple low-power modes, including Sleep, Low-power Run, and Stop modes, allowing designers to optimize energy consumption for their specific application.
Technically, the STM32L433RCT6 is built on ST's advanced 40 nm process technology, which contributes to its low power consumption. The Cortex-M4 core with FPU accelerates mathematical computations, while the ART Accelerator enables zero-wait-state execution from flash memory, improving overall system performance. The device supports a wide operating voltage range from 1.71 V to 3.6 V, making it compatible with standard battery chemistries.
Typical applications include smart meters, wearable devices, medical monitoring equipment, industrial sensors, and IoT nodes. Its ultra-low-power features make it ideal for battery-powered devices that require long operational lifetimes, such as wireless sensor networks and portable health monitors.
When designing with this MCU, careful attention should be paid to power supply decoupling and PCB layout to minimize noise and ensure reliable operation. The device's multiple low-power modes require proper configuration of wake-up sources and clock sources to achieve optimal energy savings.
Аналоги без доработки для STM32L433RCT6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32L433RCT6 (тот же форм-фактор и посадочное место) — отличается по Package, ADC, DAC, SRAM, Communication Interfaces.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
STM32L433RCT6TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
STM32L433RCT6P
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L433RCT6Q
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L432RCT6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L431RCT6
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$8.5909 / шт.
Открыть даташит →LPC845
⚡ Тот же корпус ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
RA2A1
⚡ Тот же корпус ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L433RCT6 Максимальные параметры и электрические характеристики
| Core | ARM Cortex-M4 with FPU |
| Maximum Frequency | 80 MHz |
| Flash Memory | 256 KB |
| SRAM | 64 KB |
| Корпус | LQFP64 |
| Operating Voltage | 1.71 V to 3.6 V |
| Standby Current | 100 nA |
| ADC | 12-bit with hardware oversampling |
| DAC | 12-bit |
| Communication Interfaces | USART, SPI, I2C, USB |
| Real-Time Clock | Yes |
| Process Technology | 40 nm |
| Рабочая температура | -40C to +85C |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Конфигурация выводов STM32L433RCT6
| Контакт 1 | VBAT — Battery backup supply for RTC |
| Контакт 2 | PC14 — GPIO / OSC32_IN |
| Контакт 3 | PC15 — GPIO / OSC32_OUT |
| Контакт 4 | PF0 — GPIO / OSC_IN |
| Контакт 5 | PF1 — GPIO / OSC_OUT |
| Контакт 6 | NRST — Reset (active low) |
| Контакт 7 | PC0 — GPIO / ADC_IN10 |
| Контакт 8 | PC1 — GPIO / ADC_IN11 |
| Контакт 9 | PC2 — GPIO / ADC_IN12 |
| Контакт 10 | PC3 — GPIO / ADC_IN13 |
| Контакт 11 | VDD — Digital power supply |
| Контакт 12 | VSS — Ground |
| Контакт 13 | PC4 — GPIO / ADC_IN14 |
| Контакт 14 | PC5 — GPIO / ADC_IN15 |
| Контакт 15 | PB0 — GPIO / ADC_IN8 |
| Контакт 16 | PB1 — GPIO / ADC_IN9 |
| Контакт 17 | PB2 — GPIO / BOOT1 |
| Контакт 18 | PB10 — GPIO / I2C2_SCL |
| Контакт 19 | PB11 — GPIO / I2C2_SDA |
| Контакт 20 | VDD — Digital power supply |
| Контакт 21 | VSS — Ground |
| Контакт 22 | PB12 — GPIO / SPI2_NSS |
| Контакт 23 | PB13 — GPIO / SPI2_SCK |
| Контакт 24 | PB14 — GPIO / SPI2_MISO |
| Контакт 25 | PB15 — GPIO / SPI2_MOSI |
| Контакт 26 | PC6 — GPIO / USART6_TX |
| Контакт 27 | PC7 — GPIO / USART6_RX |
| Контакт 28 | PC8 — GPIO / USART6_CK |
| Контакт 29 | PC9 — GPIO / USART6_CTS |
| Контакт 30 | PA0 — GPIO / ADC_IN0 / WKUP1 |
| Контакт 31 | PA1 — GPIO / ADC_IN1 |
| Контакт 32 | PA2 — GPIO / ADC_IN2 / USART2_TX |
| Контакт 33 | PA3 — GPIO / ADC_IN3 / USART2_RX |
| Контакт 34 | VDD — Digital power supply |
| Контакт 35 | VSS — Ground |
| Контакт 36 | PA4 — GPIO / ADC_IN4 / DAC_OUT1 |
| Контакт 37 | PA5 — GPIO / ADC_IN5 / DAC_OUT2 |
| Контакт 38 | PA6 — GPIO / ADC_IN6 |
| Контакт 39 | PA7 — GPIO / ADC_IN7 |
| Контакт 40 | PC10 — GPIO / USART4_TX |
| Контакт 41 | PC11 — GPIO / USART4_RX |
| Контакт 42 | PC12 — GPIO / USART5_TX |
| Контакт 43 | PD2 — GPIO / USART5_RX |
| Контакт 44 | PB3 — GPIO / SPI1_SCK |
| Контакт 45 | PB4 — GPIO / SPI1_MISO |
| Контакт 46 | PB5 — GPIO / SPI1_MOSI |
| Контакт 47 | PB6 — GPIO / I2C1_SCL |
| Контакт 48 | PB7 — GPIO / I2C1_SDA |
| Контакт 49 | BOOT0 — Boot mode selection |
| Контакт 50 | PB8 — GPIO / I2C1_SCL |
| Контакт 51 | PB9 — GPIO / I2C1_SDA |
| Контакт 52 | VDD — Digital power supply |
| Контакт 53 | VSS — Ground |
| Контакт 54 | PA8 — GPIO / USB_OTG_FS_SOF |
| Контакт 55 | PA9 — GPIO / USB_OTG_FS_VBUS |
| Контакт 56 | PA10 — GPIO / USB_OTG_FS_ID |
| Контакт 57 | PA11 — GPIO / USB_OTG_FS_DM |
| Контакт 58 | PA12 — GPIO / USB_OTG_FS_DP |
| Контакт 59 | PA13 — GPIO / SWDIO |
| Контакт 60 | PA14 — GPIO / SWCLK |
| Контакт 61 | PA15 — GPIO / JTDI |
| Контакт 62 | PB3 — GPIO / JTDO |
| Контакт 63 | PB4 — GPIO / NJTRST |
| Контакт 64 | VDD — Digital power supply |
Типичное применение
STM32L433RCT6 подходит для 6 применениеs: Smart Meters, Wearable Devices, Medical Monitoring Equipment, Industrial Sensors, IoT Nodes, Portable Health Monitors.
Smart Meters
The STM32L433RCT6 is ideal for smart meters due to its ultra-low power consumption and rich analog peripherals. Its 12-bit ADC with hardware oversampling enables accurate energy measurement, while the low-power modes extend battery life. The device can operate for years on a single battery, making it perfect for remote metering applications. The Cortex-M4 core with FPU handles complex metering algorithms efficiently, and the multiple communication interfaces (USART, SPI, I2C) allow connectivity with communication modules for data transmission. The wide operating voltage range (1.71 V to 3.6 V) ensures compatibility with various battery chemistries, and the 256 KB flash provides ample storage for metering data and firmware updates.
Рекомендуется
Wearable Devices
The STM32L433RCT6 is well-suited for wearable devices such as fitness trackers and smartwatches. Its ultra-low power consumption (100 nA standby) allows extended battery life, which is critical for wearables. The Cortex-M4 core with FPU enables efficient processing of sensor data, while the 12-bit ADC and DAC support analog sensor interfaces. The device's small LQFP64 package and wide operating voltage range make it easy to integrate into compact designs. The multiple low-power modes (Sleep, Low-power Run, Stop) allow the MCU to conserve energy when not actively processing, and the RTC enables timekeeping with minimal power draw. The USB interface supports charging and data transfer, and the SPI/I2C interfaces connect to sensors like accelerometers and heart rate monitors.
Рекомендуется
Medical Monitoring Equipment
The STM32L433RCT6 is suitable for medical monitoring devices such as portable ECG monitors and glucose meters. Its low power consumption ensures long battery life for portable devices, and the high-performance Cortex-M4 core with FPU handles real-time signal processing. The 12-bit ADC with oversampling provides high-resolution data acquisition for biosignals, and the DAC can generate analog output for stimulation or calibration. The device's reliability and wide operating temperature range (-40C to +85C) make it suitable for medical environments. The multiple communication interfaces (USART, SPI, I2C, USB) allow data transfer to external displays or computers, and the 256 KB flash provides ample storage for patient data and firmware. The RTC enables accurate time-stamping of medical events.
Рекомендуется
Industrial Sensors
The STM32L433RCT6 is ideal for industrial sensors that require low power and high reliability. Its ultra-low power modes allow battery-powered sensors to operate for years, and the wide operating voltage range (1.71 V to 3.6 V) ensures compatibility with industrial power supplies. The 12-bit ADC with oversampling enables precise measurement of analog signals from sensors like temperature, pressure, and flow. The Cortex-M4 core with FPU handles complex signal processing and calibration algorithms, while the multiple communication interfaces (USART, SPI, I2C) support wired or wireless connectivity. The device's robust design and wide temperature range make it suitable for harsh industrial environments. The 256 KB flash provides ample storage for sensor data and firmware updates.
Рекомендуется
IoT Nodes
The STM32L433RCT6 is a perfect choice for IoT nodes due to its ultra-low power consumption and rich connectivity options. The device can run on battery power for extended periods, making it ideal for wireless sensor networks. The Cortex-M4 core with FPU enables efficient processing of sensor data, and the multiple communication interfaces (USART, SPI, I2C, USB) allow connection to various wireless modules (LoRa, BLE, Wi-Fi). The low-power modes (Sleep, Stop) reduce energy consumption when the node is idle, and the RTC enables scheduled wake-ups. The 12-bit ADC and DAC support analog sensors and actuators, and the 256 KB flash provides ample storage for firmware and data. The wide operating voltage range ensures compatibility with battery chemistries.
Рекомендуется
Portable Health Monitors
The STM32L433RCT6 is well-suited for portable health monitors like pulse oximeters and blood pressure monitors. Its ultra-low power consumption extends battery life, and the high-performance Cortex-M4 core with FPU handles real-time signal processing. The 12-bit ADC with oversampling provides high-resolution data acquisition for biosignals, and the DAC can generate analog output for calibration. The device's small LQFP64 package and wide operating voltage range make it easy to integrate into handheld devices. The multiple communication interfaces (USART, SPI, I2C, USB) allow data transfer to smartphones or computers, and the 256 KB flash provides ample storage for patient data. The RTC enables accurate time-stamping of health measurements.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32L433RCT6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32L433RCT6TR | STM32L432RCT6 | STM32L431RCT6 | LPC845 | RA2A1 |
|---|---|---|---|---|---|---|
| Package | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors | Renesas Electronics |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M0+ | ARM Cortex-M23 |
| Maximum Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 30 MHz | 48 MHz |
| Flash Memory | 256 KB | 256 KB | 128 KB | 128 KB | 64 KB | 256 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 16 KB | 32 KB |
| Standby Current | 100 nA | 100 nA | 100 nA | 100 nA | 1.5 uA | 300 nA |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
Ключевые отличия
- Ultra-low standby current of 100 nA (против LPC845)
- Higher flash memory of 256 KB (против STM32L432RCT6)
- Cortex-M4 core with FPU (против RA2A1)
Заметки по проектированию
The STM32L433RCT6 operates from 1.71 V to 3.6 V. Use a low-dropout regulator (LDO) to provide a stable supply voltage. Decouple each VDD pin with a 100 nF ceramic capacitor and a 4.7 uF bulk capacitor. For the VBAT pin, connect a backup battery (e.g., CR2032) through a Schottky diode to prevent back-feeding. Ensure the power supply can handle peak currents during flash programming or high-frequency operation.
Place decoupling capacitors as close as possible to the VDD and VSS pins to minimize inductance. Use a solid ground plane to reduce noise and improve EMC performance. For the crystal oscillator pins (OSC_IN/OSC_OUT), keep traces short and shielded to avoid interference. Follow ST's layout guidelines in the datasheet for optimal performance.
Ensure the BOOT0 pin is properly configured to select the correct boot mode. If using the RTC, connect a 32.768 kHz crystal to OSC32_IN/OSC32_OUT and configure the RTC clock source. Do not exceed the absolute maximum ratings for VDD (3.6 V) and GPIO pins. When using the ADC, enable the internal voltage reference and calibrate the ADC for accurate readings.
Информация о соответствии
RoHS and REACH compliant per STMicroelectronics product page. Not AEC-Q100 qualified.
