STMicroelectronics

STM32L4P5VET6 - 120MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics

Артикул: STM32L4P5VET6 ✓ Активен
3.3 V Vdss 100-pin LQFP (14 mm x 14 mm) Package 120 MHz Speed 512 KB (512K x 8) Memory
MOQ: 1 |

STM32L4P5VET6 Обзор

The STMicroelectronics STM32L4P5VET6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating at up to 120 MHz with 512 KB of embedded Flash memory in a 100-pin LQFP package measuring 14 mm by 14 mm. The device integrates USB OTG, DFSDM, and 12-bit conversion capabilities for connected, low-power industrial and embedded systems.

An ultra-low-power microcontroller is an integrated semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one device. The STM32L4+ family belongs to the Arm Cortex-M4 microcontroller hierarchy and targets applications where responsive real-time processing must coexist with low standby current, efficient active-mode operation, and compact embedded control.

The STM32L4P5VET6 provides a 120 MHz Arm Cortex-M4 core, 32-bit architecture, and 512 KB of Flash for firmware and application code. Its 100-pin LQFP package supports a broad peripheral complement for sensor acquisition, communications, human-machine interfaces, and connected industrial equipment. The listed feature set includes USB OTG and DFSDM, while the 12-bit ADC and DAC resources support precision measurement and signal generation.

The high-performance Cortex-M4 architecture uses a reduced instruction set and includes floating-point capability for efficient digital signal processing and control-loop calculations. USB OTG supports direct USB connectivity for configuration, data transfer, and peripheral interfacing, while DFSDM provides a dedicated path for high-rate digital signal acquisition from external converters. These integrated functions reduce reliance on external interface devices in compact designs.

Typical applications include industrial sensor hubs, building automation controllers, USB-connected data-acquisition systems, portable medical or test equipment, low-power edge nodes, and compact motor-control or measurement products. The combination of 512 KB Flash, USB connectivity, and 120 MHz processing is particularly useful when local control logic, communications, and signal processing must share one microcontroller.

PCB design should preserve clean separation between analog and digital signals, route high-speed or USB interfaces with controlled impedance, and place decoupling capacitors close to the supply pins. Firmware must also be validated against the device pin definitions and peripheral requirements in the manufacturer datasheet before PCB routing or production release.

This page combines device specifications, practical application guidance, and engineering-focused comparisons to support MCU selection, schematic review, PCB planning, and sourcing decisions for the STM32L4P5VET6.

Аналоги без доработки для STM32L4P5VET6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с STM32L4P5VET6 (тот же форм-фактор и посадочное место) — отличается по ADC Resolution, Package, Processor Core, Product Type.

STMicroelectronics
ADC Resolution: 12 bit
Package: 100-pin LQFP
Processor Core: Arm Cortex-M4
Сравнить с STM32L4P5VET6 →

STM32L451VET6

✅ Прямая замена ⚠️ Характеристики не проверены
📦 100-pin LQFP (14 mm x 14 mm)
Maximum CPU frequency is 80 MHz versus 120 MHz, a 33% reduction; the 512 KB Flash density and 100-pin LQFP footprint remain aligned.

📋 Справочный аналог (нет в каталоге)

STM32L452VET6

✅ Прямая замена ⚠️ Характеристики не проверены
📦 100-pin LQFP (14 mm x 14 mm)
Maximum CPU frequency is 80 MHz versus 120 MHz, a 33% reduction; the 512 KB Flash density and 100-pin LQFP footprint remain aligned.

📋 Справочный аналог (нет в каталоге)

STM32L462VET6

✅ Прямая замена ⚠️ Характеристики не проверены
📦 100-pin LQFP (14 mm x 14 mm)
Maximum CPU frequency is 80 MHz versus 120 MHz, a 33% reduction; the 512 KB Flash density and 100-pin LQFP footprint remain aligned.

📋 Справочный аналог (нет в каталоге)

STM32L471VET6

✅ Прямая замена ⚠️ Характеристики не проверены
STMicroelectronics
📦 100-pin LQFP (14 mm x 14 mm)
32-bit ultra-low-power microcontroller · Arm Cortex-M4 · 32-bit RISC · 80 MHz · 512 KB · 512K x 8 · 128 KB · Integrated single-precision FPU

Уточнить цену

Открыть даташит →

STM32L475VET6

✅ Прямая замена ⚠️ Характеристики не проверены
📦 100-pin LQFP (14 mm x 14 mm)
Maximum CPU frequency is 80 MHz versus 120 MHz, a 33% reduction; the 512 KB Flash density and 100-pin LQFP footprint remain aligned.

📋 Справочный аналог (нет в каталоге)

STM32L4P5VET6 Максимальные параметры и электрические характеристики

Manufacturer STMicroelectronics
Product Type 32-bit ARM Cortex-M4 ultra-low-power microcontroller
Processor Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 120 MHz
Architecture 32-bit RISC
Embedded Flash Memory 512 KB (512K x 8)
Рабочее напряжение питания 3.3 V
USB Interface USB OTG
Digital Filter for Sigma-Delta Modulators DFSDM
ADC Resolution 12-bit
DAC Resolution 12-bit
Корпус 100-pin LQFP (14 mm x 14 mm)
Тип монтажа Surface mount

Руководство по цоколевке STM32L4P5VET6 в корпусе 100-pin lqfp (14 mm x 14 mm)

Цоколевка для STM32L4P5VET6 (корпус 100-pin lqfp (14 mm x 14 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 100-pin lqfp (14 mm x 14 mm) для STM32L4P5VET6

Нет подробных данных о распиновке для STM32L4P5VET6.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

STM32L4P5VET6 подходит для 6 применениеs: USB Sensor Hub, Industrial Data Acquisition, Building Automation Controller, Portable Medical Monitor, Low-Power Edge Sensor Node, Test and Measurement Instrument.

🧩

USB Sensor Hub

The STM32L4P5VET6 fits a USB sensor hub because its 120 MHz Arm Cortex-M4 core can process multiple sensor streams while USB OTG provides a direct device interface. The 512 KB Flash capacity accommodates firmware, configuration data, and device-management code without requiring a separate program-memory device. A practical implementation uses the USB interface for command and data traffic while DFSDM can accept suitable digital sensor streams. Designers should account for connector protection, controlled-impedance USB routing, solid grounding, and firmware scheduling so high-rate transfers do not delay control functions.

🏭

Industrial Data Acquisition

The STM32L4P5VET6 is well suited to industrial data-acquisition equipment requiring 12-bit conversion resources, a 120 MHz processing core, and 512 KB of local Flash. Its 100-pin LQFP interface can support analog inputs, digital sensing, communications, and local storage in one controller. DFSDM can provide a dedicated digital acquisition path when the sensor or converter uses a compatible sigma-delta interface. The principal design consideration is maintaining clean analog and digital partitioning while minimizing conversion, reference, and switching-noise errors that can dominate measurement accuracy.

🏠

Building Automation Controller

The STM32L4P5VET6 can serve as a building-automation controller where energy management, environmental sensing, and communications must share a compact embedded platform. Its 120 MHz Cortex-M4 core provides headroom for protocol handling and real-time control, while 512 KB of Flash supports application firmware and local configuration. The 100-pin LQFP package offers extensive routing options for serial interfaces, digital inputs, and analog sensing. Firmware should use a deterministic scheduling approach, and PCB layout should isolate sensor inputs and communication interfaces from switching regulators and high-current actuator outputs.

💊

Portable Medical Monitor

The STM32L4P5VET6 is applicable to portable monitoring equipment that combines sensor conditioning, digital processing, USB connectivity, and a compact display interface. Its 120 MHz Cortex-M4 core supports filtering and real-time analysis, and its 512 KB Flash provides room for embedded firmware and parameter sets. USB OTG enables configuration, logging, or synchronization with a host device. For a medical product, the developer must also define signal isolation, patient protection, electrical-safety boundaries, calibration, and regulatory validation independently of the MCU selection.

🔋

Low-Power Edge Sensor Node

The STM32L4P5VET6 fits an edge sensor node that must process local measurements while minimizing energy use. Its ultra-low-power STM32L4+ architecture supports duty-cycled sensing and communications, and the 120 MHz core allows time-critical filtering to run without moving every calculation to a higher-power host. The 512 KB Flash supports protocol handlers, event logic, and update-capable firmware. Real deployment should validate sleep-mode current, wake-up latency, analog-front-end noise, and regulator efficiency across the complete environmental test range.

🖥️

Test and Measurement Instrument

The STM32L4P5VET6 is appropriate for compact test and measurement products that combine fast acquisition, local processing, and USB connectivity. Its 120 MHz Cortex-M4 core can execute digital filtering, calibration routines, and instrument-control logic, while DFSDM supports compatible high-resolution acquisition stages and 12-bit converters support direct analog measurement. The 100-pin LQFP package leaves access to programming and communication interfaces while keeping the device easy to assemble. Calibration tables, reference design, analog-layout discipline, and traceable firmware updates remain essential to measurement quality.

What are the key specifications of STM32L4P5VET6 that engineers should know?
The STM32L4P5VET6 is a 32-bit Arm Cortex-M4 microcontroller rated up to 120 MHz, with 512 KB of embedded Flash and a 100-pin LQFP package measuring 14 mm by 14 mm. STMicroelectronics lists USB OTG, DFSDM, and 12-bit conversion resources among its key features. According to the STM32L4P5Vxx family documentation, the device combines high-performance real-time processing with an ultra-low-power design for compact embedded systems.
What is the operating voltage of STM32L4P5VET6?
The STM32L4P5VET6 is listed as a 3.3 V microcontroller. Its complete operating voltage limits, internal regulator settings, and external-supply tolerances should be confirmed in the manufacturer datasheet before a schematic is released. The listed 3.3 V operating point is also consistent with the 100-LQFP industrial and embedded design class targeted by this device.
How much Flash memory does STM32L4P5VET6 have?
The STM32L4P5VET6 contains 512 KB of embedded Flash, organized as 512K by 8 bits. This storage accommodates bootloader code, operating firmware, configuration data, and application logic. The 512 KB figure is stated in the manufacturer-linked product listings, while the usable application space also depends on the programmed bootloader, option bytes, and firmware update strategy.
Where can I download the STM32L4P5VET6 datasheet PDF?
The official STM32L4P5Vxx product page is available through the manufacturer link on this page, and its documentation includes the family datasheet and supporting technical resources. Search for the exact STM32L4P5VET6 ordering code when downloading a document so that the 100-pin LQFP variant, memory configuration, and pin assignments are covered.
Where can I find the STM32L4P5VET6 pinout?
The STM32L4P5VET6 pinout is defined in the pin-description table of the STM32L4P5Vxx manufacturer datasheet. The package is a 100-pin LQFP, so use the complete pin table and package drawing together when assigning analog inputs, debug signals, communication interfaces, power rails, and ground pins. Verify the alternate-function settings before routing a board.
What can replace STM32L4P5VET6?
The closest drop-in choices are other 100-pin LQFP members of the STM32L4 family that retain 512 KB of Flash and a compatible Cortex-M4 peripheral framework, such as STM32L451VET6, STM32L452VET6, STM32L462VET6, STM32L471VET6, and STM32L475VET6. These alternatives generally operate up to 80 MHz rather than 120 MHz. A replacement also requires checking boot configuration, pin multiplexing, firmware support, and any application-specific peripheral dependencies.
Is STM32L4P5VET6 the same as STM32L451VET6?
The STM32L4P5VET6 and STM32L451VET6 share the 32-bit Arm Cortex-M4 architecture, 512 KB Flash configuration, 100-pin LQFP package, and broadly compatible STM32L4 hardware platform. They are not identical in performance: the STM32L4P5VET6 operates up to 120 MHz, while the STM32L451VET6 is commonly specified up to 80 MHz. Existing firmware and peripheral use should therefore be reviewed before substitution.
STM32L4P5VET6 vs STM32L452VET6 - which is better for USB data acquisition?
Choose the STM32L4P5VET6 when processing throughput is the priority because it runs up to 120 MHz, compared with the 80 MHz maximum associated with STM32L452VET6. Both use the 100-pin LQFP format and provide a 512 KB Flash configuration in the considered variants. The STM32L452VET6 may remain suitable when its USB, DFSDM, and other peripheral requirements meet the application and the lower clock rate is acceptable.
STM32L4P5VET6 vs STM32L475VET6 - which is better for industrial control?
The STM32L4P5VET6 is preferable when maximum control-loop throughput matters because it reaches 120 MHz, while the STM32L475VET6 commonly reaches 80 MHz. Both considered orderings use a 100-pin LQFP package and 512 KB of Flash. The STM32L475VET6 can still be appropriate for industrial control if its available peripherals, temperature grade, qualification, and software support satisfy the product requirements.
When should I choose STM32L4P5VET6 over STM32L452VET6?
Choose the STM32L4P5VET6 when the design benefits from its 120 MHz maximum operating frequency and needs the STM32L4P5 performance tier. STM32L452VET6 is a reasonable alternative for a 100-pin, 512 KB design that can operate within an 80 MHz limit. Before replacing the STM32L4P5VET6, confirm the required peripheral mix, pin multiplexing, memory-map expectations, and firmware compatibility.
Is STM32L4P5VET6 suitable for USB-connected sensor hubs?
The STM32L4P5VET6 is suitable for a USB-connected sensor hub because it combines a 120 MHz Cortex-M4 core with USB OTG and DFSDM capability. Its 512 KB Flash supports a meaningful embedded firmware footprint, while the 100-pin LQFP package provides access to a broad peripheral set. Sensor accuracy and hub throughput still depend on the selected ADC, external signal conditioning, and interface implementation.
What is the best GigaDevice equivalent for STM32L4P5VET6?
No GigaDevice equivalent can be treated as a confirmed drop-in replacement for the STM32L4P5VET6 from the available cross-reference information. Pin-compatible alternatives for other STM32 families do not establish compatibility with this 100-pin Cortex-M4 device, and firmware, bootloader, peripheral, and electrical behavior must match. Use the Request a Quote form when qualified sourcing for the exact STM32L4P5VET6 is required.
Where to buy STM32L4P5VET6 online?
Use the Request a Quote form on this page to request STM32L4P5VET6 sourcing, current availability, and order routing. The exact ordering code includes a 512 KB Flash configuration in a 100-pin LQFP package, so attach that full MPN to the request. The manufacturer and major authorized distribution listings also identify the part under this exact order code.
What is the price of STM32L4P5VET6?
Current commercial terms for STM32L4P5VET6 are handled through the Request a Quote form on this page. The exact MPN is important because STM32L4 series variants can differ in Flash density, package, temperature grade, and ordering suffix. A quote request preserves the distinction between the 100-pin LQFP device and other members of the STM32L4P5Vxx family.
What is the lead time and stock status for STM32L4P5VET6?
Current stock and lead time for STM32L4P5VET6 should be requested through the Request a Quote form on this page. Use the complete MPN when requesting the 512 KB Flash, 100-pin LQFP configuration. The manufacturer listing supports direct ordering of this exact device, while project schedules and quantity requirements should be confirmed in the same quotation response.

Справочные инженерные данные для STM32L4P5VET6 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the STM32L4P5VET6 when the design benefits from its 120 MHz Cortex-M4 processing ceiling, 512 KB Flash, USB OTG, DFSDM, and 100-pin LQFP footprint. It is particularly suitable for USB-connected data acquisition, sensor hubs, test equipment, and industrial controllers that perform meaningful local processing. The STM32L452VET6 is a practical same-family alternative when its 80 MHz limit is sufficient and the required USB and DFSDM functions are present. Consider the STM32L451VET6 for lower-frequency Cortex-M4 designs after confirming that DFSDM is not required. The STM32L462VET6, STM32L471VET6, and STM32L475VET6 offer other same-family options with the same footprint and Flash-class configuration, but each replacement decision requires checking peripheral availability, pin multiplexing, clock requirements, boot behavior, temperature grade, and firmware support. None of these alternatives should be treated as automatically interchangeable without schematic, firmware, and timing validation.

Сравнение с аналогами

Параметр Этот товар STM32L451VET6 STM32L452VET6 STM32L462VET6 STM32L471VET6 STM32L475VET6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 100-pin LQFP (14 mm x 14 mm) 100-pin LQFP (14 mm x 14 mm) 100-pin LQFP (14 mm x 14 mm) 100-pin LQFP (14 mm x 14 mm) 100-pin LQFP (14 mm x 14 mm) 100-pin LQFP (14 mm x 14 mm)
Processor Core Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU
Maximum CPU Frequency 120 MHz 80 MHz 80 MHz 80 MHz 80 MHz 80 MHz
Embedded Flash Memory 512 KB (512K x 8) 512 KB 512 KB 512 KB 512 KB 512 KB
Architecture 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC
USB Interface USB OTG USB device capability USB OTG USB OTG USB OTG USB OTG
ADC Resolution 12-bit 12-bit 12-bit 12-bit 12-bit 12-bit
DAC Resolution 12-bit 12-bit 12-bit 12-bit 12-bit 12-bit

Ключевые отличия

  • Higher processing ceiling within the compared STM32L4 100-pin options (против STM32L452VET6)
  • USB and DFSDM integration for connected acquisition systems (против STM32L451VET6)
  • 512 KB Flash with a 120 MHz Cortex-M4 core (против STM32L471VET6)
  • Performance headroom for local filtering and control (против STM32L475VET6)

Заметки по проектированию

Route USB and other high-speed interfaces as controlled-impedance nets with a continuous reference plane and minimized branch lengths. Keep the USB connector, protection devices, and MCU-side routing in one defined signal region. Avoid placing switching-regulator power paths beneath USB data lines, because inductors and discontinuous current loops can increase radiated emissions and compromise signal integrity.

Do not treat an STM32L4 family pin compatibility claim as a complete replacement qualification. Before substituting the STM32L4P5VET6 with STM32L451VET6, STM32L452VET6, STM32L462VET6, STM32L471VET6, or STM32L475VET6, verify boot configuration, oscillator pins, debug connections, analog functions, communication peripherals, interrupt assignments, and the maximum clock required by the application. A footprint match alone does not guarantee identical firmware behavior.

Place every required decoupling capacitor close to the corresponding power and ground pins, following the capacitor values and network shown in the manufacturer datasheet. Provide adequate bulk charge near the MCU and keep high-current return paths away from sensitive analog inputs. Verify startup voltage, internal-regulator configuration, and the relationship between clock frequency and current draw across the intended temperature range.

Separate analog inputs from digital clocks and switching nodes, and use a continuous ground reference beneath sensitive routes. DFSDM and USB interfaces need short, symmetric connections to their source devices, while ADC inputs may require filtering that interacts with acquisition time and bandwidth. Validate crosstalk, converter reference noise, and sampling timing in hardware rather than relying only on nominal peripheral ratings.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance status was not stated in the product information available for this device. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the manufacturer product page or applicable declaration documents.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

STM32L4P5VET6 datasheet STM32L4P5VET6 pinout STM32L4P5VET6 datasheet pdf STM32L4P5VET6 specifications STM32L4P5VET6 LQFP-100 STM32L4P5VET6 120MHz STM32L4P5VET6 512KB flash STM32L4P5VET6 replacement STM32L4P5VET6 equivalent STM32L4P5VET6 vs STM32L452VET6 STMicroelectronics STM32L4P5VET6 STM32L4P5VET6 USB OTG STM32L4P5VET6 DFSDM STM32L4P5VET6 price

Связанные компоненты & термины

STMicroelectronics STM32L4P5VET6 STM32L4P5Vxx STM32L4+ Series Arm Cortex-M4 Arm Cortex-M4F 32-bit RISC microcontroller ultra-low-power microcontroller embedded Flash memory USB OTG DFSDM 12-bit ADC 12-bit DAC LQFP-100 100-pin LQFP 14 mm by 14 mm package 120 MHz 512 KB Flash USB sensor hub industrial data acquisition building automation controller edge sensor node test and measurement equipment STM32L451VET6 STM32L452VET6
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ